Opening Raw in CS3

I just got the new canon 5d, mark II and am unable to open raw images in Photoshop cs3. I get the message " could not complete your request because photoshop does not recognize this type of file". Is there a free download to update Photoshop cs3, or do I need to purchase the new cs5 in order to process the raw images?

You will never be able to open the raw files from your new camera in CS3.
You need at least ACR 5.7 that only runs in CS4, or wait for ACR 6.1 which will only work with CS5.
However, you can download the free Adobe DNG Converter 5.7 and convert your files to raw DNGs you can then open in CS3.
Just realize that you will be leaving a lot of image quality behind if you stay with ACR in CS3.

Similar Messages

Cannot open RAW in CS3. This must be a common problem. Any help please?

Good day folks
Anyone got any help with opening files in RAW ? I'm using CS3 and my cam is a 5D mark 2. Keep getting the same generic message from adobe " could not complete your request because this is not the right type of document " aaarrrgghhhhhh.......
Cheers
G

Thanks for the reply dude but i've tried these options
No, you haven't -- at least not Solution 4.
however CS3 seems to only support version 4.6 ???
Correct.
Which means you need to follow Solution 4 described on this page:
http://kb2.adobe.com/cps/407/kb407110.html
Please read it and follow its steps very carefully.
Eric

I am unable to open raw files from my Canon T1i in Adobe Camera Raw of my version CS3 of Photoshop. I have tried to update my ACR by downloading version 4.6 from the Adobe website but I am still unable to open raw files, just JPEG. Is there a way to use

I am unable to open raw files taken on my Canon Rebel T1i in my version of Photoshop CS3. When I import raw files into Bridge they come up as patches with CR2 on them and when clicked on, a notice comes up stating that Photoshop does not recognize these files. I tried to update my Adobe Camera Raw by downloading version 4.6 from the Adobe Website, but when I clicked on the plus-in, I got another message that Photoshop does not recognize this file. I spoke with a representative from Canon who said that I could not update CS3 and that I should subscribe to the Cloud. I would prefer to use my CS3, if possible. Can anyone advise me what to do?

The T1i was first supported by Camera Raw 5.4 which is only compatible with CS4 and later
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all T1i Raw files to DNGs then edit the DNGs in CS3
Camera raw, DNG | Adobe Photoshop CC

Can't open RAW files in CS3 or Bridge

I am using PowerMac G4 running OS 10.4.10, one gig RAM, with an Nvidia Geforce 4 MX graphics card. Adobe Updated notified me the new Camera RAW plugin was available so I said yes to install it. The installer hung half way through and I had to force quit it. Since then I can't open RAW (Nikon NEF) files in Bridge or CS3. I get generic raw file thumbnails in Bridge and the error "Could Not complete your request because Photoshop does not recognize this file type" when trying to open one into ACR from Bridge or Photoshop. I tried d'loading the plug-in and manually putting it in the proper folder, still no good. I have reinstalled the program from the install disk, purged the main and folder cache in Bridge, deleted the PS preferences (command+alt+ shift when opening PS), repaired OS permissions, and the like, all to no avail. Photoshop or Bridge just don't see the plug-in when opening NEF files, though it does show in the "Bout P, which is in the proper place- root/library/application support/adobe/plug-ins/CS3/file formats/camera RAW Plugin
How can I fix it?

Greetings! I am having the same problem.
I'm a graphic designer (not a photographer), working on Mac 10.4.11, CS3 (ps is 10.0.1, bridge is 2.1.1.9) with the latest ACR plug-in (4.3.1) and the latest DNG Converter. Our photo library is on a server, accessed by multiple computers.
We can preview .CR2 in Bridge, open .CR2 in PS.
6However, we cannot preview or open .CRW files. We have tested on three machines, all with the same problem. In the past (before CS3) we were able to open and process these files.
Tried opening .CR2 files in CS2 and couldn't. Couldn't open them with DNG Converter or Graphix Converter.
Have tried all the standards fixes:
1. Correctly updated the most recent Camera Raw plug-in, following Adobes very explicit instructions as to where the plug-in goes (checked it three times).
2. Removed a copy of the Camera Raw plugin from a secondary folder, hoping that might have caused conflict.
3. Reset my preferences in Photoshop and Bridge to default.
4. Purged the cache in Bridge (via TOOLS, not in preferences) and refreshed AND told Bridge to build new thumbnails/caches
5. Closed/reopened Bridge.
6. Repaired permissions
7. Restarted my computer
We are going to try to find a disc with original RAW photos that have never been placed on the server to see if it's a server issue. However I'm thinking that's not the problem.
Any ideas as to why we can no longer open these CRW files?
I have two problems I need to solve:
1. For future photoshoots: does turning OFF sRAW setting help prevent this problem?
2. Is there anyway to convert the .CR2 files without using Photoshop CS3/2 or DNG Converter? We're hoping to try to salvage the photos we have.
I did see Elev Man's comment about the problem being corrupt files...disk failure/problem fixed with Disk Warrior. I'll also check that out.
Thanks!

Problem with opening raw image in CS3 extended

I just installed my CS3 Extened on my new Windows 8 Desktop and when I tried to open a Nikon raw image I get an error telling me it's the wrong type. How do I fix this ? It was working on my Windows 7 computer.

This just started when I installed the CS 3 Extended on my new Windows 8 computer. It only affects my ability to open Nikon D90 Raw files. Everything else (standard JPG) works fine. I also have NX Capture 2 from Nikon and it opens the RAW files fine. I also have Adobe elements 9 and it opens the same RAW files without any problems.
The same problem developed when I installed the CS 3 on my HP laptop last year. It still will not open raw files.
Thanks
Bill

Couldn't open RAW files in Bridge Cs3

Hi,
the RAW files (CR2) cannot be opened/developed with using Bridge CS3. When I double click the file (CR2) in Bridge, it just gave this prompt in Photoshop, "Could not complete your request because Photoshop does not recognize this type of file."
I used to be able to open Raw files in my friend's G5 using Bridge. When I double click the file, it will automatically open the Canon Camera Raw with settings for me to adjust before I develop the picture. However when I tried on my own computer, it came out the prompt I mentioned above.
Please advise what is the problem with my Bridge. Do I need to reintall the whole of Adobe suite?
Thank you so much.

Brian
first check again the right location of (only one!) ACR plug in (see post 3 of this thread for details)
Then quit Bridge, in user library go to preferences and manual trash the plist file for Bridge (com.adobe.bridge2.plist), restart again with option key and again reset prefs.
If this is still not working create a new user account and check if Bridge is working correctly in this new user, if so your user account is corrupt and you should do maintenance for the OS (Archive and install).
If still no luck go again to the user library/cache/Adobe/BridgeCS3/cache. This cache file can grow to the enormous portions, check the size and if you wish make a copy for back up. Then delete this whole cache file by dragging it to the trash. Again delete plist file and again restart option to refresh prefs. By deleting the cache file you will need to recache all your folders so it is a very hard way but it worked for me several times.

Nikon camera RAW will not open in PS CS3 on Win 8

I have photoshop CS3 extended ver 10 and Elements 6. I installed both on a new PC with windows 8. PS will not open my RAW files taken with my Nikon D40X although Elements will. PS opens tiff and jpeg. I went to Adobe updates and tried to install ACR 4.6 (Camera raw 8bi.) The Error message for bothe the opening RAW files and installing the update is, "Could not complete your request because it is not the right type of document." I uninstalled PS and Elements and reinstalled just PS. Same problems. I transfer the RAW files from my camera to computer by copying them through a card reader.
Thanks for any help.

PS and PSE each have a different place to put the .8bi file, so manually do the updated according to the instructions for each product on this page:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
Re-installing PS or PSE will revert the ACR plug-in for that software back to the oldest version that originally came with that version of software so you’ll need to update using the contents of the ZIP file, again.
You can do a Help / About Plug-in… / Camera Raw… in PSE and PS to see what version you have installed in each. Plug-ins are scanned at startup, so you’ll want to restart each product after doing the manual install.

Opening raw files in photoshop cs3

can anyone help please, can i open raw image files in cs3? do i need a plug in or a download?

You need Adobe Camera Raw (ACR). Go to the download page and download the last vesion for CS3, believe it was 4.6.
Be aware that each version of Photoshop has its own series of ACR.
So if you have a latter model camera it might not work with an older ACR. To check look here http://kb2.adobe.com/cps/407/kb407111.html

Opening RAW files in older CS3

I have an older version, PS3 Extended. I have always opened RAW files with no problem. Recently, a friend with a newer camera and newer version of PS gave me some RAW files to open, and my CS3 says "Could not complete your request because it's the wrong kind of document". I am wondering if the problem could be that I have an old version of PS? Thanks.

That's exactly the problem. It's all in the FAQ: http://forums.adobe.com/thread/311515
You need the DNG Converter to open a batch of newer raw files. If you need to do this regularly, you might need to think about upgrading or using Lightroom.

Cannot open Raw images from 5d Mark II in CS3

I'm back with more issues. I had this same problem opening raw images in CS3 from my 40d (I have Windows 7 64 bit). With your help I was able to fix that issue with a patch, but now I am having the same problem with opening raw images from my new 5d Mark II. Help again please!

You need to familiarise yourself with this:
http://kb2.adobe.com/cps/407/kb407111.html
You will see that, as a minimum, you need ACR 5.2, which needs Photoshop CS4 to work.
If you don't want to upgrade, use the latest DNG converter which will make your images viewable and editable in CS3.
It's here: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4620

RAW will not open in Bridge CS3

I cannot open a RAW file in Bridge CS3--there is no "open RAW.." in the menus, the shortcuts do not work. I will only open RAWs in PSCS3. I have the Extended version.
I have tried reseeting the settings in both Bridge and PS. Makes no difference.
Any help would be very appreciated!

Have you tried a completely clean install from scratch--OS + CS3?
That will work for sure, but it means starting over with your computer OS install from scratch--a completely clean full format of your disk before starting.
There is obviously something on there that conflicts with it now. The same thing happened to a guy I work with. He tried for two weeks. I had the same problem on one of my machines. I simply started from zero, and so did he. Works perfectly. On my other machine it went right on without a hitch along with the other twenty or so apps that were already on there! Go figure.
Look at it this way, if you want ACR 4 in Bridge, starting over will probably take about one tenth the time you've spent trying to troubleshoot it!

I can't open canon .CR2 files in Adope camera raw in CS3

When i want to open my .CR2 file from my Canon camera 40D into bridge or photoshop CS3 it does not open it and it can't recognize the file in some way. My computer is working with windows vista. I really need help as i dont know why it is not doing it. Thanks

Bruce Pollock wrote:
Distilling the Tech Note down, essentially you can't open .CR2 files in CS3. I think CS4 is the first version that has .CR2 compatibility. One option that doesn't involve upgrading to CS4 is to download the free Adobe DNG converter and convert your .CR2 files to .dng. Then you can open them in CS3.
No, that isn't right. The Canon 40D was supported in at least the last version of Camera Raw for CS3. There are a few things you need to verify.
1. In Photoshop, go to Help/About Plug-Ins and click on Camera Raw in the list. It will tell you what version you have installed. You should have Camera Raw 4.6 listed, and it should only be listed once. If there are additional listings then you have a problem. Camera Raw will now work.
2. Get the download instructions from the Adobe download website and make sure Camera Raw is installed in the right folder. It must be that specific folder, and there can be no other versions of Camera Raw in the Adobe file structure.
3. Are you able to see your raw images in Bridge? If not, then there is something wrong with your installation.
Check these things out and make sure everything is set up properly. Then maybe we can help you further.

When opening camera raw in cs3, cannor read document

when trying to open camera raw in cs3, it keeps telling me that it cannot read document

There could be a million reasons why what you describe could be the case.
I'm going to guess at one of them: Your camera is newer than the version of Camera Raw you are running.
Could you please express yourself more clearly so we can try to help you without guessing?
Thanks.
-Noel

I opened RAW files from D800 accidentally in CS3 (on old laptop) and are unable to open them now CS6. How to open them?

I opened RAW files from D800 accidentally in CS3 (on old laptop) and are unable to open them now CS6. How to open them?

Sorry, yes this is Microsoft Excel. The Microsoft XP has Excel files denoted as xl, the later versions of Microsoft Excel are denoted as xls files. The later verions of Microsoft Excel open the xl files OK, does Excel for Mac not able to do this?

CS3 - NIKON D3100 - opening RAW-files

my cs3 can't open NEF from my Nikon D3100 - for the NEF of D300 i had to change the plug-in - what are my options to solve the problem
best regards

Download the 6.6 DNG converter to convert your d3100 files to dng copies which can then be opened in the cs3 camera raw plugin.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5310
Also the newest camera raw plugin for cs3 is 4.6

Opening Raw in CS3

Similar Messages

Maybe you are looking for