OPM Physical and Cycle Count API

We are developing a custom MCSA form that calls the OPM Physical and Cycle Count API to enter Physical and Cycle Counts. How does the API create new Tag or Count Sheet Numbers and which table stores this values. I see three input parameters for this API but not sure how they work - P_page_no, P_line_no & P_count_no.
Thanks, Tony W.

You need to pass one serial at a time.
Hope this answers your question.

Similar Messages

Physical Inventory/cycle Counting procedure in Inventory Management

Hi everyone
i have been posting some of my queries here on SDN but i never got any reply from anyone
I had another question, Can anyone tell me what is the configuration steps for Physical Inventory/Cycle counting in IM, What are the IMG config involved for both.
2. In cycle counting if i want the system to tell what material to be cycle counted that what is the Transaction for it
Lucas

Hi Lucas,
Please go with following transaction
MI01>Create physical inventory document>Enter Document Date>Planned count date>Plant Code>Storage Location>Click on Enter button>you will get the separate screen>Enter material code>and click on SAVE button (Ctrl+S)>you will get Physical inventory document number. (MI02-Use for delete)
(After getting Physical inventory document number you go with MIO4)
MI04>click on enter button>you will get "Enter inventory count screen>Enter Phys. inventory doc.no>Fiscal year>Count date>click on enter button>you will get separate screen>Enter physical qty>and click on save button ((Ctrl+S)>you will get massage from the SAP Count entered for phys. inv. doc. 100000112"
(After completed above transaction you please go with MI07)
MI07>you will get Post inv.differences:initial screen>Enter Phys. inventory doc.> Fiscal year> Posting date>click on enter button>you will get separate screen with deference qty>click save button(Ctrl+S)> you will get document number generated from the system (Diffs in phys. inv. doc. 100000112 posted with m. doc. 4900001246)
Pls. assign the points.
Thanks & Regds,
Rajesh Kolhe

Physical Inventory & Cycle counting report

Hi,
Would like to reports on Physical Inventory & cycle counting.
Also would like to know a comparitive report which should show before & after Physical Inventory alsong with Qty & values per plant & material.
Will be pleased if I could have at IM level & WM level also.
Regards,
Vengat

Hi,
1. You can use T CODE- MI23 -Display Physically inventory data for material.
2. You can use T CODE- MB59 -Give material code/plant code/Mov Type 701-702/Posting period -Execute (F8) >> Click on current display variant button (Ctrl+F) for selection "Amt.in loc.cur".
Thanks & Rgds,
Rajesh

Cycle Count API and Serial Items

We've been using mtl_cceoi_action_pub.import_countrequest to submit our cycle counts, but now have to include serial items.
I cannot find out how to link serial numbers to this procedure so that it can pass. There is a serial_number field in the record passed to the procedure, but how do I deal with quantities greater than 1?
Any ideas?
Many thanks.
Jonathan
Edited by: [email protected] on 16-Dec-2009 02:57

You need to pass one serial at a time.
Hope this answers your question.

Physical incentory - Cycle counting

Dear MM consultants,
I am using PI cycle count process,
It is a fresh client so no consumption update a so f now. We assigned ABC indicator in material master.
When i execute MICN tcode i am getting " no material found for PI '
Kindly guide me how to fix
Thanks
A.Gururajan

OSS note 518418
In principle, the program calculates the planned date of physical
inventory according to the following formula:
planned date = base date + Interval (Trans.OMCO/Tab.XT159C-ININV)
Usually, the base date is the 'date of the last physical inventory'.
Depending on the type of the stock or the batch management
requirement, this date is read from one of the following table
fields:
MARD-DLINL (Normal materials)
MCHB-CHDLL (Batch materials, separately valuated materials)
If no physical inventory has been carried out yet and if this date
field is therefore empty, the system uses the creation date of the
material as basis date. The basis date then comes from one of the
following table fields:
MSTA-ERSDA (Normal materials)
MCHB-ERSDA (Batch materials, separately valuated materials)
Since the cycle counting physical inventory always runs for the
current fiscal year, the earliest possible physical inventory date
is the 01.01. and the latest possible physical inventory date is the
31.12 of the current year.

Physical inventory cycle counting

hi friends,
i have maintained cc indicator in mmr and period of counting set in omco. but while running the physical inventory , it is not showing the list. so can anybody give the cycle counting procedure with tcodes. i will award full points. thanx

Friend
Go through the following links. useful for you to know what exactly has gone wrong in you case
http://www.sap-img.com/mm010.htm
help.sap.com/saphelp_47x200/helpdata/en/4a/58dc3ecb9f2e5ae10000000a114084/content.htm
SAP Enjoy
Regards

Physical Inventory-Cycle count

Gurus,
I am getting this when use the TC-LI20
Storage bin 1000000073 in storage type 999 does not exist.What should be done.

HI,
I executed LX26.
I entered the count thro LI11N saved.
When i try clear the difference i am getting the error
Storage bin 1000000074 in storage type 999 does not exist (check your entry)
1000000074-Inventory document number
When i try in LI21 ,I get msg no data exist.
What does this mean
How proceed and complete the PI.
Edited by: murugan sivakumar on Nov 5, 2009 11:17 AM

Problem in Physical inventory cycle count

Hi Guys,
I m facing problem with the transaction MICN, report is RM07ICN1
This report works absolutely fine for "C" type indicators.(time interval is 2 years)
But when we try to run thw report for "B" type indicators(time interval is 1 year), I get incorrect outputs.
I have checked the table , so per day it should output 27 materials to be checked, but I get sometimes more than 1000 materials sometimes 50, sometimes 10 .
I cant resolve this issue .. The diffrence between the two indicators is the time interval.
Please help me out of this .

Hi Guys,
I m facing problem with the transaction MICN, report is RM07ICN1
This report works absolutely fine for "C" type indicators.(time interval is 2 years)
But when we try to run thw report for "B" type indicators(time interval is 1 year), I get incorrect outputs.
I have checked the table , so per day it should output 27 materials to be checked, but I get sometimes more than 1000 materials sometimes 50, sometimes 10 .
I cant resolve this issue .. The diffrence between the two indicators is the time interval.
Please help me out of this .

Regarding Cycle Count Entries

Dear All,
I am doing cycle counting in which I have 10 Items in my subinventory. I have completed ABC Analysis and classified first 2 items as A and next 3 item as B and remain 4 items as C. Even I have performed Cycle Count as well.
In Cycle count entries i am not able to enter count quantity for my entire 10 items instead it is showing only 6 items only. Why I was not able to see remaining 4 items and how do I enter count quantity for those missed 4 items?
What would be the solution if i want to see all my 10 items in in cycle count entries form?
Edited by: SaroR on Jan 20, 2010 6:58 AM

Can you check mtl_cceoi_action_pub.import_CountRequest api?
Please make sure you carry out the following before calling the API.
1. Create a Cycle Count
2. Enter a Manual Cycle Count Entry.
3. Run program "Perform Complete Cycle Count" to generate generate cycle count request
4. Post the count Entries using the by calling the API using your Script.
Check the following MOS notes.
Cycle Count Request Import (MTL_CCEOI_ACTION_PUB API) Fails When Using Serial Number Multiple Per Request [ID 1468453.1
Cycle Count Api Not Working For Scheduled Counts [ID 786497.1]
The Cycle Count Open Interface Is Not Working For The Stock In Api [ID 818977.1]
Cheers,
ND
Use the "helpful" or "correct" buttons to award points to replies / Mark the thread as answered, if your question is answered.

Step to Configuration the Physcial Inventory & Cycle counting

Guru
PL help Me the detailed steps to configure for Physical Inventory & cycle counting required
Thanks
sudhir

hi
you have to do the settings
Materials Management -- > Inventory Management and Physical Inventory --> Physical Inventory & Inventory Sampling
Field Selection for Physical Inventory
Default Values for Physical Inventory
Settings for Physical Inventory
Default Values for Batch Input
Maintain Copy Rules for Reference Documents
Allow Freezing of Book Inventory Balance in Storage Location
Create Inventory Sampling Profiles
Define Stock Management Levels
Define Stock Management Levels in WMS
Cycle Counting
Activate Distribution of Consumption Differences

Date Format Error During Cycle Count Activation

Hi MM Guru's,
Could you kindly help me with regards to my problem?
I was trying to activate the cycle count for the newly plant i created under new company code.
But im getting a date format error?
Anyone who could help me regarding this?
Thank you in advance.

HI All,
I have check my own data date format.
But when i tried to activate the cycle count under
Menu path:
Materials Management > Inventory Management and Physical Inventory>Physical Inventory> Cycle Counting
I will not put any date on it, that's why its weird that i get an date format error.
Where this error came from?
Thanks..

Cycle count listing Report not generating out put

Hi Team ,
We are into 11.5.10.2 , We have set Auto schedule to weekly in cycle counts and cycle count is not generating output for cycle count listing in Production.
But, we are able to generate report output in Test instance and unable to generate in Production . We tried testing with same login in Production and Test Instance .
Please advice
Thanks
Kiran

Also please confirm that the CC calendar and other CC related setups are exactly same from the PROD and TEST instances.
Also make sure that you are running the report for the same INV org.. as there is no Input parameter for the Org in the report input but it picks from the MFG_ORG_ID profile value, which gets assigned when you loginto the responsibility.. You can confirm the selection by Chane Instance Org and select the Inv org and then run the report..

Cycle count 11" 10.8.1 weird behavior

Working on my MBA 11" 2012 with 10.8.1 bought 1 month ago, i checked the cycle count and was 4. After 2 hours i installed an application (Battery time remaining) that shows on the top bar the time remaining. Clicking on that time, it says to you the remaining percentage and cycle count. At the end of the work i checked the battery percentage and... guess... the cycle count now says 5!!! without connecting the plug...
Someone knows why?
it's normal or i have to go to the support?
Thank you.

Thank you for the link but i already knew it.
The problem is that even in the Apple information page the count was 4 and after 2 hours changed to 5 without charging the MBA.

Cycle count and inventory document generation

hi.
Currrent Scenario : Cycle count has been configured for Quarterly cycle count for 20 materials.
Float period has been set for 5 days.
Procedure : Customer wants to do inventroy count for the 20 materials at the rate of one material per day.
Question : 20 Materials falling under "C" quarterly cycle count show up for Physical inventory.
Can the customer create an inventory document for <b>inventory count each day for each material</b> or will they have to create 20 inventory documents for count at one go since the float period is set for 5days.
Will the float period indicated play a part if the physical inventory is planned for each material on separate days.
Or if an physical inventory has been planned for the quarterly managed material, all material in that category say "C" would anyway show up during the quarterly inventory cycle count period.And the inventory count can be done for each material on seperate days.
Thanks

hi Arif.,
Earlier situation : Cycle count procedure was only A.
Present situation : Cycle count procedure is now ABCD .
But only C.c indicator A is still active for all material. We have not
changed the Cc indicators for any material.
Transported to production on Friday.
My question is :
On monday ,when the batch program was executed for printing of inventory
documents, Why does it generate a whole lot inventory documents for
Materials which have not been inventored even when the C.c indicators
remain A for all the Materials.We have not even in-corporated the
Quarterly cycle count indicators for the few selected materials.
Should the system:
1. Print Inventory documents only for the current period or
2. Is the system behaving properly due to the change in Cycle count?
Only the Cycle count procedure has been changed to 4 times in a fiscal year.
Do review the information and update me.

How to exclude a set of materials from cycle counting physical inventory

How to exclude a set of materials from cycle counting physical inventory
Details:
Set of material to be uploaded to SAP on say Jan-2011 from another system with cc indicator D:once
in a year and fixed,before uploading into SAP physical inventory will be done .
So we donot want again those materials to fall in the cycle counting in the same year.
So is there a method to exclude these materials from CC counting for the year 2011
or is there some way to upload last inventory count date in SAP system so that it will exclude those
materials?
Any answers will be appreciated.
Thanks
Bijay

HI Antony
Thank you for your reply.
If material count is less than this method is well valid.
IN our case there are 7lakhs materials and having diff cc indicator A,B,C,D...
So it will cumbersome for client to keep track of all those materials when to update cc indicator.
So any other thought? can we upload last count date while updating materials details or similar
Thanks
Bijay

OPM Physical and Cycle Count API

Similar Messages

Maybe you are looking for