Cycle Count API and Serial Items

We've been using mtl_cceoi_action_pub.import_countrequest to submit our cycle counts, but now have to include serial items.
I cannot find out how to link serial numbers to this procedure so that it can pass. There is a serial_number field in the record passed to the procedure, but how do I deal with quantities greater than 1?
Any ideas?
Many thanks.
Jonathan
Edited by: [email protected] on 16-Dec-2009 02:57

You need to pass one serial at a time.
Hope this answers your question.

Similar Messages

OPM Physical and Cycle Count API

We are developing a custom MCSA form that calls the OPM Physical and Cycle Count API to enter Physical and Cycle Counts. How does the API create new Tag or Count Sheet Numbers and which table stores this values. I see three input parameters for this API but not sure how they work - P_page_no, P_line_no & P_count_no.
Thanks, Tony W.

You need to pass one serial at a time.
Hope this answers your question.

Battery finishes in 2h 20 min maximum. Cycle count 375 and condition is normal. what to do please help????

Battery finishes in 2h 20 min maximum. Cycle count 375 and condition is normal. what to do please help????

No i have checked thorougly i dont have any window emulation parallel. i had a problem with my charger some days back that Apple replaced me. but after that i started having battery timing 2h 20 min maximum. the details about the MBP are as:
MacBookPro6,2
Charge Information:
Charge remaining (mAh):          2375
Fully charged:          No
Charging:          No
Full charge capacity (mAh):          6046
Health Information:
Cycle count:          376
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          -1569
Voltage (mV):          11043
                                 and (eww) i have read the related article linked http://support.apple.com/kb/TS1473 . though I could not understand the 5th point of this article but i think there is no problem about that.. PLEASE HELP

Cycle Counts, import and use

I see that when importing to the oItems destination via DTW, it is possible to bring in Cycle Count info. There is no sample or template CycleCount sheet, so what I know I gleaned just from looking at the mappable fields in DTW.
Can anyone give me some tips about importing and using Cycle Counts? I confess I find updating any destination via DTW to be a real chore, frequently more work that it is worth.
In this instance I already have items and warehouses and prices and quantities on hand. All I would want to do is import Cycle Count fields. So in DTW would this be considered an update (of existing items) or an import (just of cycle counts)? Since I don't want to change anything for the items, warehouses, or prices, what would be the least amount of data I'd have to show for the already ready loaded areas to get the cycle counts in?
TIA.

By Cycle Counts If you talking about importing prices and quantities
You need to use DTW template StockTaking template inside folder oStockTaking.
Here you will enter ItemCode WH and Quantity
the Prices will be imported using the ItemPrices template in the oItems folder as an Update with the Item main template.
then you will through the Inventory > Inventory Trans > Initial Quantity Reconcile the Quantities imported
Suda

Cycle Count Reservation Issue in Item Supply/Demand Form

Hi
Few of the inventory items are stuck with Cycle Count Reservation in Item Supply/Demand Form. The Identifier field is empty. It is not tied to any sales order or PO . I checked the On hand quantity(on-hand quantity form) and the current on hand (Item Supply/Demand form) both are same. Could not able to figureout what went wrong and how the cycle count reservations are created. Even after performing the Cycle counting on these items, it did not consumed these reservations and releaved those reservations.
Could anyone suggest me please in what scenrios we get this issue and how to eliminate these records from the Item Supply/Demand Form. we are on 11.5.10.2 INV and WMS RUP4.
Thank You!
Krishna

CC reservations can be triggered by Curtail (Short) picks on mobile gun. When this happens the ATR qty gets decremented by this Qty by putting a CC reservation.
This can also be deleted from front end by changing the demand source to acc/acc alias, save and then delete.
Karthik

Execute Inventory with Cycle-Counting Method and by Quants

Hi Gurus,
I would like to Implement the Inventory by quant on WM.
This is because I would like to Inventory only 1 material per Bin.
I found transaction LICC, but when I try to activate the Document an error message say that the Inventory Document Range (LVS_IVNUM) does not exist.
How can I create this range? Have you got a manual for this implementation?
Another Question: the Inventory count is allready implemented and there is still a range of Inventory Documents created and managed by LI01N, LX26..the Cycle Counting by quants can interferate with the one allready implemented?
Thanks & Regards,
Simone

Hi,
For the LICC issue I had same problem. Direct in production you need to maintain number ranges in LN05 for your warehouse.
Thanks.

Non serialized and Serialized item in same documnet?

Hi Experts,
Is it possible to have both serialized and non serialized items in the same document and process them in AII?
Help would be very well appreciated.
Thanks and regards,
Vivek

I found out that the thing that puts the label in a separate table column is the horizontal/vertical alignment property of the label.
Even if the label is blank, if the alignment is set to the default right, that causes the item itself to be shoved to the next column.
so yes you can get the pretext and posttext in the same column as the label by changing that label alignment.

Cycle Counting - Inactive Items

Hi,
The Inactive items are appearing in the cycle count. Is this the intended functionality of the Oracle?
Also please let me know how to make sure that Inactive items dont appear on the cycle counts.
Thanks in advance.
RA

Deleting data from open interface will not stop the cycle count requests showing the items..
The CC requests will stop getting created for the items only when you DELETE the item form the CC.
Follow the below navigation and delete the item's
INV Super User>>Counting>>Cycle Counting>>Cycle Counts>>Your CC NAme>>Open>>Items>>Query ur Inactive Item>>Delete
After you do this for all your inactive items there should not be any new requests to do CC for these items

Duplicate Items in Cycle Count

Hello -
I am new to setting up Cycle Counts.
We have a count that is weekly and it is generating the same count for week 2 as it did for week 1 for all subinventories.
It is setup with a yearly calendar defining the weeks.
It is setup for the Org on the 1st of the month.
It is setup on a scheduler as weekly.
Once it is setup - we run the Cycle Count Scheduler and then run the Generate Count Requests.
Generally the team at the subinventory location will run the weekly counts a few days prior to the due date In this case. run the count for 4/1-4/7 for their subinventory location and then do the count and enter by the 8th.
When they ran their counts on 4/9 and and 4/10 for 4/8-4/14 - the same items (new tag numbers) printed for each subinventory location.
We did find that someone in another location reran the Generate Count Requests on 4/8.
Did this maybe cause the count to restart and duplicate week 1 data as week 2 data?
Thanks for any suggestions or assistance.
SC

How do I ask a question on the forums?
SQL and PL/SQL FAQ

Cycle Count - Serialized Materials???

Hi,
We need to cycle count our serialized materials. Please let me know what is the procedure and how can we enter the serial numbers to the count??
Please advice,
sen

Thanks for your qucik reply.
Let us say if i have a material of 10 ea with 10 different serial numbers. How i can cycle count one particular serial number??
Thanks,
sen

Cycle count and inventory document generation

hi.
Currrent Scenario : Cycle count has been configured for Quarterly cycle count for 20 materials.
Float period has been set for 5 days.
Procedure : Customer wants to do inventroy count for the 20 materials at the rate of one material per day.
Question : 20 Materials falling under "C" quarterly cycle count show up for Physical inventory.
Can the customer create an inventory document for <b>inventory count each day for each material</b> or will they have to create 20 inventory documents for count at one go since the float period is set for 5days.
Will the float period indicated play a part if the physical inventory is planned for each material on separate days.
Or if an physical inventory has been planned for the quarterly managed material, all material in that category say "C" would anyway show up during the quarterly inventory cycle count period.And the inventory count can be done for each material on seperate days.
Thanks

hi Arif.,
Earlier situation : Cycle count procedure was only A.
Present situation : Cycle count procedure is now ABCD .
But only C.c indicator A is still active for all material. We have not
changed the Cc indicators for any material.
Transported to production on Friday.
My question is :
On monday ,when the batch program was executed for printing of inventory
documents, Why does it generate a whole lot inventory documents for
Materials which have not been inventored even when the C.c indicators
remain A for all the Materials.We have not even in-corporated the
Quarterly cycle count indicators for the few selected materials.
Should the system:
1. Print Inventory documents only for the current period or
2. Is the system behaving properly due to the change in Cycle count?
Only the Cycle count procedure has been changed to 4 times in a fiscal year.
Do review the information and update me.

Regarding Cycle Count Entries

Dear All,
I am doing cycle counting in which I have 10 Items in my subinventory. I have completed ABC Analysis and classified first 2 items as A and next 3 item as B and remain 4 items as C. Even I have performed Cycle Count as well.
In Cycle count entries i am not able to enter count quantity for my entire 10 items instead it is showing only 6 items only. Why I was not able to see remaining 4 items and how do I enter count quantity for those missed 4 items?
What would be the solution if i want to see all my 10 items in in cycle count entries form?
Edited by: SaroR on Jan 20, 2010 6:58 AM

Can you check mtl_cceoi_action_pub.import_CountRequest api?
Please make sure you carry out the following before calling the API.
1. Create a Cycle Count
2. Enter a Manual Cycle Count Entry.
3. Run program "Perform Complete Cycle Count" to generate generate cycle count request
4. Post the count Entries using the by calling the API using your Script.
Check the following MOS notes.
Cycle Count Request Import (MTL_CCEOI_ACTION_PUB API) Fails When Using Serial Number Multiple Per Request [ID 1468453.1
Cycle Count Api Not Working For Scheduled Counts [ID 786497.1]
The Cycle Count Open Interface Is Not Working For The Stock In Api [ID 818977.1]
Cheers,
ND
Use the "helpful" or "correct" buttons to award points to replies / Mark the thread as answered, if your question is answered.

Perform Full Cycle Count - No Data Found

I am trying to initialize a full cycle count for all items in a subinventory. I have a recent ABC compile set and a new cycle count setup. A, B, C and D classes are all set to count 1x per year. I have verified that all items from the compile are no in the cycle count. I submitted a "Cycle Count Scheduler" request and ensured that it completed. I then set all the parameters in the "Perform Full Cycle Count" request and set to save to file. After it completes and I view the output, the file says "No data found". My only recourse is to dump all items from Material workbench and use Data Load to enter them in ( a bit tedious for 900+ items). Is there anything I need to be doing different?

You mention that you have done the ABC setups.
But in Cycle count setups, have you defined a cycle count schedule?
And more importantly, in cycle count classes, have you entered the frequency at which each class should be counted?
Last but not the least, what is the last count date (on the serial and schedule tab)?
If it is today, you will have to wait till tomorrow.
Hope this helps,
Sandeep Gandhi

Warehouse Management Cycle Counting Method

Dear All
I am new to WM and would like to carry out Physical Inventory in Warehouse.
However if I use transaction like LI01N I have to create a Physical Inventory Document for the entire Bin.I want to create Physical Inventory Document only for few materials and not for the entire Bin.
In that scenario I have to use Cycle Couting method ie LX26 for certain materials however in that case n physical Inventory Doc is created.
Can anybody let me know regarding?
1.Is there any way that I do not use Cycle Counting method and still create Inv Doc not for Bin but for selected materials.
2.If I have to use cycle couting what steps I am missing,I have already set the cycle counting Indicator in material master but still when I execute LX26 and go to list and create Physical Inv Doc the system is not creating any document.
Regards

so when you say you already did the below steps, then it means you added the indicator in the material master and the CC entry is also updated in the transation OMNK. So that's why when you execute the LX26, you see some entries.
In LX26, when you select the item and trying to click the Activate Documents, what does the log message says. It should say either open transfer order exists or bin blocked or anything.
Even you can try LICC to create inventory document by quant, if you have multiple quant in that bin.
2.If I have to use cycle couting what steps I am missing,I have already set the cycle counting Indicator in material master but still when I execute LX26 and go to list and create Physical Inv Doc the system is not creating any document.

MIE1 :: Sale order cycle count issue

Dear All,
II am using transaction MIE1 to create inventory documents for sales order stock. I am receiving many more items to count than expected. I checked the cycle count indicator and materials coded to be counted only once a year and last counted in February and March in table MSKA, but still when i executer IME1 system is picking it for cycle count.
We are on SAP 4.67. Our fiscal year ended at the end of September.
Anyone know why these materials would show as due to count now?
Thanks,
Chaithru

Hi Terry,
To be honest there is not normally any standard manipulation of the bin sequence in Physical Inventory, but here are a few places to look here (Grab a coffee first)
Logistics > Warehouse Management > Strategies > Define Sort Sequence for Putaway >
Logistics > Warehouse Management > Strategies > Define Sort Sequence for Removal >
These two items determine the sort order priorty of your bin numbers, eg. if your bin numbers are 10 digits long, you could sort the bins in order using key co-ordinates with differing priority. So the second character of your bin could be sorted prior to the first character. (The logic here will be based upon the individual warehouse layout/rules)
Next have a look in
Logistics > Warehouse Management > Activities > Transfers > Processing Performance > Profiles (Have a look at Sort profile)
Logistics > Warehouse Management > Activities > Transfers > Processing Performance > Control for Performance Data Processing / Define TO Split
In these two you can manipulate the sort order of the bin numbers in TO and other documents, can look complex but is simple when you have understood the logic
Good luck
Steve

Cycle Count API and Serial Items

Similar Messages

Maybe you are looking for