Opmnctl failed-"start managed process after the maximum retry limit"-URGENT

Hi All,
I tried to start the opmn process after configuring BIGIP and securing the OMS.But opmnctl startall failed saying unable to start "HTTP_Server".
[aime@stamt02 ~/TC3]$ ./oms10g/opmn/bin/opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=stamt02:6200
5 of 6 processes started.
ias-instance id=EnterpriseManager0.stamt02.us.oracle.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=30117)
failed to start a managed process after the maximum retry limit
Log:
/scratch/aime/TC3/oms10g/opmn/logs/HTTP_Server~1
log file says :
[aime@stamt02 conf]$ tail -f /scratch/aime/TC3/oms10g/opmn/logs/HTTP_Server~1
07/04/24 04:29:24 Start process
/scratch/aime/TC3/oms10g/Apache/Apache/bin/apachectl startssl: execing httpd
07/04/24 04:29:29 Start process
/scratch/aime/TC3/oms10g/Apache/Apache/bin/apachectl startssl: execing httpd

Same problem for me also.
I could start all other process except HTTP
while starting that it is show a mesg as follows
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | N/A | Down
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | home | 3596 | Alive
[oracle@mrk bin]$ ./opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=mrk.mydomain.com:6200
0 of 1 processes started.
ias-instance id=ias_hns.mrk.mydomain.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=3860)
failed to start a managed process after the maximum retry limit
Log:
/u01/Oracle10gAS/opmn/logs/HTTP_Server~1
Please any one help me.
mail me at [email protected]
Thanks in advance

Similar Messages

Error-- failed to start a managed process after the maximum retry limit

hi
I installed oracle 10g application server. its installed fine. But now i am facing a problem in which i am getting the following error message when i try to start opmnctl from command prompt:
opmnctl: starting opmn and all managed processes ..
======================================================
opmn id=apps:6200
0 of 1 processes started.
ias-instance id=orcl.apps
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
default_group/home/default_group/
Error
-->Process (index=1, uid=1845537884, pid=1320)
failed to start a managed process after the maximum retry limit
Log:
D:\product\10.1.3.1\oracleAS_1\opmn\logs\\default_group~home~default_group~1.log
Please help me in order to remove this, so that i can run oracle apps.
Regards,
Aqrs

Hi
i checked the log already but there is not such problem defined in it.
Following is the log generated ion this error:
Configuration information
Running in D:\product\10.1.3.1\OracleAS_1
Operation mode:Startup, App Server, No Enterprise Manager, Single Instance
Oracle home:D:\product\10.1.3.1\OracleAS_1
Oracle home name:Unnamed
Instance name:orcl.apps
Instance type:allProducts
Version:10.1.3.1.0
Uses infrastructure:false
Not an infrastructure instance, no infrastructure information available
Components:[j2ee, orabpel, oraesb, owsm, Wsil]
2009-06-03 01:46:58.609--Begin log output for Mid-tier services (orcl.apps)
2009-06-03 01:46:58.625--Processing Step: starting OPMN
2009-06-03 01:47:07.921--Processing Step: starting OPMN managed processes
2009-06-03 01:48:47.312--End log output for Mid-tier services (orcl.apps)
An unknown OPMN error has occured
oracle.appserver.startupconsole.model.ConsoleException: An unknown OPMN error has occured
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:140)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
     ... 6 more
Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
     at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
     at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
     ... 6 more
Exception caused by
There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
     at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
     at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
     ... 6 more
<?xml version='1.0' encoding='WINDOWS-1252'?>
<response>
<msg code="-82" text="Remote request with weak authentication.">
</msg>
<opmn id="apps:6200" http-status="204" http-response="0 of 1 processes started.">
<ias-instance id="orcl.apps">
<ias-component id="default_group">
<process-type id="home">
<process-set id="default_group">
<process id="1848837552" pid="3128" status="Stop" index="1" log="D:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~home~default_group~1.log" operation="request" result="failure">
<msg code="-21" text="failed to start a managed process after the maximum retry limit">
</msg>
</process>
</process-set>
</process-type>
</ias-component>
</ias-instance>
</opmn>
</response>
Could u plz guide now ?

Failed to start a managed process after the maximum retry limit

Hi,
Getting the following error
/app/oracle/product/101202/opmn/bin (OID)>opmnctl startproc ias-component=OID
opmnctl: starting opmn managed processes...
================================================================================
opmn id=smtest02:6202
0 of 1 processes started.
ias-instance id=infra.smtest02
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OID/OID/OID
Error
--> Process (pid=26032)
failed to start a managed process after the maximum retry limit
Log:
/app/oracle/product/101202/opmn/logs/OID~1
Any suggestions
Thanks
Kedar

Hi Alvarez
I have managed to start OID
stop the process using opmnctl stopall
stop the database
stop the listener
stop emctl processes
usind oidctl to stop OID instance
start the listener
start the database
start the process opmnctl startall
start emctl start iasconsole
used oidctl to star instance for OID
/app/oracle/product/101202/bin (OID)>cd ../opmn/bin
/app/oracle/product/101202/opmn/bin (OID)>opmnctl status
Processes in Instance: infra.smtest02
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 7763 | Alive
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 6183 | Alive
OID | OID | 6187 | Alive
but when i am trying to start dbconsole ( command below) getting follwong error OC4J Configuration issue. /app/oracle/product/101202/oc4j/j2ee/OC4J_DBConsole_smtest02_OID not found.
emctl start status dbconsole
/app/oracle/product/101202/oc4j/j2ee/OC4J_DBConsole_smtest02_OID ---> /app/oracle/product/101202/oc4j/j2ee/OC4J_DBConsole_smtest02_ORACLEID
where can i change the setting for the parameter so that i can log on to dbconsole from the browser, which config file ?
the reason i needed dbconsole was to use Oracle Directory Naming GUI to configure db to replace old Names Server hence i need Db console GUI
Kedar

Start managed server with the node manager???

Hello,
I have one admin server and one managed server for my domain. Can i Start the amdin and managed server from the node manager and not just the admin server. Currently with the install of node manager only the admin server starts and not the managed server. I need to log in to the admin server to start my managed server which is very cumbersome.
Edited by: user9021545 on Mar 11, 2011 1:58 PM

hi,
In order to start Managed server from the console itself,then u have to enroll your node manager.
Step1). Start the AdminServer...using startScript "startWebLogic.sh/cmd"
step2)start ur node manager using stat node manager scripts,
step3)Login to adminConsole and then see the NodeManager is Reachable or not
If reachanble
then run "setWLSEnv.sh/cmd".
Then run wlst.sh file
Step3)connect('weblogic','weblogic','t3://localhost:7001')
Step4)nmEnroll('C:/bea103/user_projects/domains/7001_Domain','C:/bea103/wlserver_10.3/common/nodemanager')
After this u will be able to start and stop managed server from console itself
Note:even after dis your managed server doesnt starts then please check under <DOMAIN_ROOT>\servers\<SERVER_NAME> whether you have a folder name as security and inside it whether you have file called as boot.properties
if no then follow these below steps
Please create a directory "security" inside your
<DOMAIN_ROOT>\servers\<SERVER_NAME>
inside "<DOMAIN_ROOT>\servers\<SERVER_NAME>\security" ( Example Location:
WLS103/user_projects/domains/Test_Domain/servers/AdminServer/security )
directory create a file with exactly same name as "boot.properties" and with
following 2 lines inside it:
username=weblogic
password=weblogic
NOTE: Here "weblogic" is the Administrator username & password...
if you want dont want to run Admin server from foreground then try runnin it as a background process
This link wi; b helpful for that
http://middlewareforum.com/weblogic/?cat=23
any further help in this den do let me know
Regards
Fabian

How to stop the boot process after the GRUB menu?

Hello there.
I am getting an error message in the boot process, after the GRUB menu, but I can't read completely the message because it is shown too fast. So, how can I stop the process when I see the error message, for writing down it?
Thanks in advance.

zuargo wrote:
Hello there.
I am getting an error message in the boot process, after the GRUB menu, but I can't read completely the message because it is shown too fast. So, how can I stop the process when I see the error message, for writing down it?
Thanks in advance.
I didn't try this before, but if you use systemd, you may want to try systemd.confirm_spawn to invoke interactive booting process, so you can start the services one by one manually therefore locate the one throwing out error message.
It is explained in the systemd manual:
http://www.freedesktop.org/software/sys … stemd.html

Hellow my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry

hellow
my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry on.plz help me how it witt work starting.i urgently need to on my i pod.plz help me plzzzzzzzzzzzzzzzz

Hi there shehla sattar,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPad: Basic troubleshooting
http://support.apple.com/kb/ts3274
-Griff W.

How to automate the WM/shipping process after the consignment issue ?

I am looking for the best way to automate the shipping process after the consignment issue orders has been created. since Warehouse/shipping process will not consist of any actual picking and shipment but we are still required to go through the use of Vl01N and VL02N for Delivery Note and Good issue... steps......I want to know if there is any best practice is to automate the call to VL01N,VLO2N for all the completed consignment issue orders that SAP suggest or someone has done some work in this space.....and can share their views.....
one situation to explain the needs....
Create the consignment issue orders via EDI....and once they are there ...we need a automatic process to find these order and create the delivery note , goods issue documents.........looking forward to hear from experts who can inform if there is a standard SAP process( automatic) out there or we need to do some custom development....to achieve this....thanks.....

Thanks for the insight....we are thinking to have a new custom table added which will have all the order that needs to batch processed and if we have any errors we can re process them from the control table ( new custom table)...please let us knwo if there is any other way to do this....or sap already has some tables....whihc we can use...to automate....as a batch process.....

HT3986 How do I start up Mac after the Windows has been installed.

How do I start up Mac after the Windows has been installed? And after I installed the Windows, my Audio is gone. How can I get it back?

Welcome to the Apple Support Communities
1. To boot into Mac OS X, press X key while your computer is starting.
2. Install Boot Camp drivers

When I update an app it asks for my password (as usual) but now there is no touch keyboard or other way to enter the password. This problem started, I think, after the latest OS update.What's going on?

When I update an app it asks for my password (as usual) but now there is no touch keyboard or other way to enter the password. This problem started, I think, after the latest OS update.What's going on?

I tried a reset and it did the trick.

Macbook air Wi Fi and sound stops every time it goes to sleep. i have to restart it every time to use wifi and sounds. this started happening just after the latest upgrade to X. any reasons why its doing that and how to fix it.

Macbook air Wi Fi and sound stops every time it goes to sleep. i have to restart it every time to use wifi and sounds. this started happening just after the latest upgrade to OS X. any reasons why its doing that and how to fix it.

Test after taking each of the following steps. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved.
2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
6. In some cases, the problem has been resolved by repairing permissions on the startup volume.
7. Turn off Bluetooth and test.
8. Reinstall OS X.

Pages wont load half the time have to close all the way and reopen always says conecting this really started to happen after the last 2 updates

pages wont load half the time have to close all the way and reopen always says connecting this really started to happen after the last 2 updates

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Hi Experts, can the secondary windows be processed after the main window?

Hi Experts,
at the end of the main window there is a command node and can the secondary windows be processed after the main window? thanks for your reply.
Kind regards
Dawson

Hello Dawson
No it can't Process the secondary window if you are calling a new Page in that command line.
Even if it gets called I don't think it will give the desired output.
Give it a try, But I am sure its not going to give you the desired output instead attach the command line to the end of your secondary window and in condition tab of secondary window check the check box "Only after Main window".
Hope this discussion was helpful.
Cheers,
Suvendu

Since a few weeks all my iTunes Updates fail to install. After the installation trial, the previous installation is damaged – a service is missing.

Since a few weeks all my iTunes Updates fail to install. After the installation trial, the previous installation is damaged – a service is missing :
To fix this I have to deinstall all components of Apple Software in exact order as you reveal on your web site. Than reinstall iTunes from Scratch.
I am using Windos 7 64 bit Professional German edition.

Hi,
to see the cause of Windows 8 update failures, we must look for error messages in the following log files:
Please run the Windows Explorer and go to the folder "C:\Windows\Logs\CBS\" and copy all files to your document folder, also copy the setupapi.dev.log from the folder C:\Windows\Inf, the "C:\Windows\WindowsUpdate.log" and the file "C:\Windows\winsxs\poqexec.log"
to your document folder (otherwise you can't upload it), zip all files into 1 ZIP and upload the zip to your SkyDrive [1] and post a link here.
André
[1] http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65
"A programmer is just a tool which converts caffeine into code"

How to start a thread after the execution/termination of another thread.???

Hello,
How to start a thread after the execution/termination of another thread....???
For example:
consider two threads: ThreadA and ThreadB
I could start the ThreadB after the execution of ThreadA.
How to identify the termination of one thread.....???
Please help me...
Thanks & Regards,
Kayalvizhi

What do you mean with "it doesn't work"? Do you get a compiler error? Do you get an exception at runtime? What's the error message?
Jesper

The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 35 MB: MALAWI .pptx.

The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 35 MB.
I have had my macbook pro since June and have had no problems sending an email until I have tried to send a presentation today. The above message is what I keep receiving even after using 3 email accounts.

Email providers often set file size limitations to conserve bandwidth and prevent service overload. Most common seems to be a limit on the order of 21 MB. If possible, break your presentation into two parts and send as two messages.

Opmnctl failed-"start managed process after the maximum retry limit"-URGENT

Similar Messages

Maybe you are looking for