Failed to start a managed process after the maximum retry limit

Hi,
Getting the following error
/app/oracle/product/101202/opmn/bin (OID)>opmnctl startproc ias-component=OID
opmnctl: starting opmn managed processes...
================================================================================
opmn id=smtest02:6202
0 of 1 processes started.
ias-instance id=infra.smtest02
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OID/OID/OID
Error
--> Process (pid=26032)
failed to start a managed process after the maximum retry limit
Log:
/app/oracle/product/101202/opmn/logs/OID~1
Any suggestions
Thanks
Kedar

Hi Alvarez
I have managed to start OID
stop the process using opmnctl stopall
stop the database
stop the listener
stop emctl processes
usind oidctl to stop OID instance
start the listener
start the database
start the process opmnctl startall
start emctl start iasconsole
used oidctl to star instance for OID
/app/oracle/product/101202/bin (OID)>cd ../opmn/bin
/app/oracle/product/101202/opmn/bin (OID)>opmnctl status
Processes in Instance: infra.smtest02
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 7763 | Alive
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 6183 | Alive
OID | OID | 6187 | Alive
but when i am trying to start dbconsole ( command below) getting follwong error OC4J Configuration issue. /app/oracle/product/101202/oc4j/j2ee/OC4J_DBConsole_smtest02_OID not found.
emctl start status dbconsole
/app/oracle/product/101202/oc4j/j2ee/OC4J_DBConsole_smtest02_OID ---> /app/oracle/product/101202/oc4j/j2ee/OC4J_DBConsole_smtest02_ORACLEID
where can i change the setting for the parameter so that i can log on to dbconsole from the browser, which config file ?
the reason i needed dbconsole was to use Oracle Directory Naming GUI to configure db to replace old Names Server hence i need Db console GUI
Kedar

Similar Messages

Error-- failed to start a managed process after the maximum retry limit

hi
I installed oracle 10g application server. its installed fine. But now i am facing a problem in which i am getting the following error message when i try to start opmnctl from command prompt:
opmnctl: starting opmn and all managed processes ..
======================================================
opmn id=apps:6200
0 of 1 processes started.
ias-instance id=orcl.apps
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
default_group/home/default_group/
Error
-->Process (index=1, uid=1845537884, pid=1320)
failed to start a managed process after the maximum retry limit
Log:
D:\product\10.1.3.1\oracleAS_1\opmn\logs\\default_group~home~default_group~1.log
Please help me in order to remove this, so that i can run oracle apps.
Regards,
Aqrs

Hi
i checked the log already but there is not such problem defined in it.
Following is the log generated ion this error:
Configuration information
Running in D:\product\10.1.3.1\OracleAS_1
Operation mode:Startup, App Server, No Enterprise Manager, Single Instance
Oracle home:D:\product\10.1.3.1\OracleAS_1
Oracle home name:Unnamed
Instance name:orcl.apps
Instance type:allProducts
Version:10.1.3.1.0
Uses infrastructure:false
Not an infrastructure instance, no infrastructure information available
Components:[j2ee, orabpel, oraesb, owsm, Wsil]
2009-06-03 01:46:58.609--Begin log output for Mid-tier services (orcl.apps)
2009-06-03 01:46:58.625--Processing Step: starting OPMN
2009-06-03 01:47:07.921--Processing Step: starting OPMN managed processes
2009-06-03 01:48:47.312--End log output for Mid-tier services (orcl.apps)
An unknown OPMN error has occured
oracle.appserver.startupconsole.model.ConsoleException: An unknown OPMN error has occured
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:140)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
     ... 6 more
Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
     at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
     at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
     ... 6 more
Exception caused by
There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
     at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
     at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
     ... 6 more
<?xml version='1.0' encoding='WINDOWS-1252'?>
<response>
<msg code="-82" text="Remote request with weak authentication.">
</msg>
<opmn id="apps:6200" http-status="204" http-response="0 of 1 processes started.">
<ias-instance id="orcl.apps">
<ias-component id="default_group">
<process-type id="home">
<process-set id="default_group">
<process id="1848837552" pid="3128" status="Stop" index="1" log="D:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~home~default_group~1.log" operation="request" result="failure">
<msg code="-21" text="failed to start a managed process after the maximum retry limit">
</msg>
</process>
</process-set>
</process-type>
</ias-component>
</ias-instance>
</opmn>
</response>
Could u plz guide now ?

Opmnctl failed-"start managed process after the maximum retry limit"-URGENT

Hi All,
I tried to start the opmn process after configuring BIGIP and securing the OMS.But opmnctl startall failed saying unable to start "HTTP_Server".
[aime@stamt02 ~/TC3]$ ./oms10g/opmn/bin/opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=stamt02:6200
5 of 6 processes started.
ias-instance id=EnterpriseManager0.stamt02.us.oracle.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=30117)
failed to start a managed process after the maximum retry limit
Log:
/scratch/aime/TC3/oms10g/opmn/logs/HTTP_Server~1
log file says :
[aime@stamt02 conf]$ tail -f /scratch/aime/TC3/oms10g/opmn/logs/HTTP_Server~1
07/04/24 04:29:24 Start process
/scratch/aime/TC3/oms10g/Apache/Apache/bin/apachectl startssl: execing httpd
07/04/24 04:29:29 Start process
/scratch/aime/TC3/oms10g/Apache/Apache/bin/apachectl startssl: execing httpd

Same problem for me also.
I could start all other process except HTTP
while starting that it is show a mesg as follows
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | N/A | Down
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | home | 3596 | Alive
[oracle@mrk bin]$ ./opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=mrk.mydomain.com:6200
0 of 1 processes started.
ias-instance id=ias_hns.mrk.mydomain.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=3860)
failed to start a managed process after the maximum retry limit
Log:
/u01/Oracle10gAS/opmn/logs/HTTP_Server~1
Please any one help me.
mail me at [email protected]
Thanks in advance

Failed to start ns-slapd process on Windows

I install Sun Directory Server 6.0 on Windows:
1. Installation
dsee_deploy install -c DS -i D:\DirectoryServer
2. Create Instance
D:\DirectoryServer\ds6\bin\dsadm create D:\DirectoryServer\ds
3. Start instance
D:\DirectoryServer\ds6\bin\dsadm start D:\DirectoryServer\ds
And get folloving error:
Server not running ! Failed to start ns-slapd process
Server's log is empty.
What I can do to solve this problem ?
I see topic with this problem on UNiX platform, and
how about Windows 2003? I make installation as Administrator.
Michael Vasilyev

Thank you, Ludovic !
I have new error when create Instance with command (changes default port number):
dsadm create -p 1525 D:\DirectoryServer\ds
Then I start DirectoryServer:
dsadm start D:\DirectoryServer\ds
And get in command line:
Waiting for server to start...
Waiting for server to start...
Waiting for server to start...
Waiting for server to start...
Waiting for server to start...
Waiting for server to start...
Waiting for server to start...
Waiting for server to start...
Waiting for server to start...
Waiting for server to start...
Waiting for server to start...
Server not running!! Failed to start ns-slapd process
In Dialog Window appear message:
Directory Server ds is terminating. Failed to set the EventLog source.
---------------------------------------------------------------------------------------------

How to stop the boot process after the GRUB menu?

Hello there.
I am getting an error message in the boot process, after the GRUB menu, but I can't read completely the message because it is shown too fast. So, how can I stop the process when I see the error message, for writing down it?
Thanks in advance.

zuargo wrote:
Hello there.
I am getting an error message in the boot process, after the GRUB menu, but I can't read completely the message because it is shown too fast. So, how can I stop the process when I see the error message, for writing down it?
Thanks in advance.
I didn't try this before, but if you use systemd, you may want to try systemd.confirm_spawn to invoke interactive booting process, so you can start the services one by one manually therefore locate the one throwing out error message.
It is explained in the systemd manual:
http://www.freedesktop.org/software/sys … stemd.html

The engine failed to start before timeout. Restart the application (HDB 10005)

Hi everyone,
I experienced many times this type of error starting a SAP Lumira Document (version is 1.17, but even trying with the new version 1.19, right after the installation):
"An Error Occured: Data Source creation failed .The engine failed to start before timeout. Restart the application. (HDB 10005)".
I've already found (also in this community) some solutions, but they seems to me like temporary fixing, because sometimes I have to deal with this problem again. Can someone please explain me why this problem happens, and if a definitive fixing is in the works?
Thank You.

I am working on Lenovo Helix with Intel i5 processor and 4 GB of fixed memory. And before setting the virtual memory size (paging size) on my laptop it was switched off (no paging). So maybe this was the root cause of the issue for me.
/Marcin

How to automate the WM/shipping process after the consignment issue ?

I am looking for the best way to automate the shipping process after the consignment issue orders has been created. since Warehouse/shipping process will not consist of any actual picking and shipment but we are still required to go through the use of Vl01N and VL02N for Delivery Note and Good issue... steps......I want to know if there is any best practice is to automate the call to VL01N,VLO2N for all the completed consignment issue orders that SAP suggest or someone has done some work in this space.....and can share their views.....
one situation to explain the needs....
Create the consignment issue orders via EDI....and once they are there ...we need a automatic process to find these order and create the delivery note , goods issue documents.........looking forward to hear from experts who can inform if there is a standard SAP process( automatic) out there or we need to do some custom development....to achieve this....thanks.....

Thanks for the insight....we are thinking to have a new custom table added which will have all the order that needs to batch processed and if we have any errors we can re process them from the control table ( new custom table)...please let us knwo if there is any other way to do this....or sap already has some tables....whihc we can use...to automate....as a batch process.....

Start date should be after the dd.mm.yyyy or later error message.

We have recently applied HR support packs 46 to 51 and now when updating Personal Data (IT0002), Bank Details (IT0009) or Addresses (IT0006), the following error message is displayed 'Start date should be after the 07.02.2010 or later'. Where the screens allow for a future date to be entered we have done so, but the same error message appears.
Has anyone encountered this problem after apply support packs?
Jason

Hi,
Check what is the date maintained in table V_T569R.
With Reagrds
Shyam V

Hi Experts, can the secondary windows be processed after the main window?

Hi Experts,
at the end of the main window there is a command node and can the secondary windows be processed after the main window? thanks for your reply.
Kind regards
Dawson

Hello Dawson
No it can't Process the secondary window if you are calling a new Page in that command line.
Even if it gets called I don't think it will give the desired output.
Give it a try, But I am sure its not going to give you the desired output instead attach the command line to the end of your secondary window and in condition tab of secondary window check the check box "Only after Main window".
Hope this discussion was helpful.
Cheers,
Suvendu

The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 35 MB: MALAWI .pptx.

The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 35 MB.
I have had my macbook pro since June and have had no problems sending an email until I have tried to send a presentation today. The above message is what I keep receiving even after using 3 email accounts.

Email providers often set file size limitations to conserve bandwidth and prevent service overload. Most common seems to be a limit on the order of 21 MB. If possible, break your presentation into two parts and send as two messages.

The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 10 MB

Dear sir/madam
I installed exchange server 2013
my clients want to attache more than 10 MB
when they attache more than 10 MB they got this massage "The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 10 MB"
so how can you help me to increase the attachment size and the way to do that
how can I change the default 10 MB
Please can you help me as soon as
Rawa Zangana

Hi Rawa,
You can use EAC or EMS to set the MaxSendSize. The default value of MaxSendSize is 10 MB.
If you use EAC, here is the steps:
Logon to EAC -> Mail flow -> Receive connectors -> settings-> type the Maximum send message size you want to set
If you use EMS, please use the cmdlet Rajith provided.
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

IPod Shuffle: How to set the maximum volume limit

How do I get back to the volume default I set at the onset of using my shuffle?
I have speakers in my Ski Helmet and would now like to turn up the volume louder than I have currently set for my in ear earpods.
Any help is appreciated.
b

If you're talking about the Maximium Volume Limit:
Setting the Maximum Volume Limit
You can set a limit for the maximum volume on iPod shuffle. You can also set a
password in iTunes to prevent this setting from being changed by someone else.
If you’ve set a volume limit on iPod shuffle, the status light blinks orange three times if
you try to increase the volume beyond the limit.
To set the maximum volume limit for iPod shuffle:
1 Set iPod shuffle to the desired maximum volume.
2 Connect iPod shuffle to your computer.
3 In iTunes, select iPod shuffle in the Source pane.
4 Click the Settings tab.
5 Select “Limit maximum volume.”
6 Drag the slider to the desired maximum volume.
The initial slider setting shows the volume the iPod shuffle was set to when you
selected the “Limit maximum volume” checkbox.
7 To require a password to change this setting, click the lock and enter a password.
If you set a password, you must enter it before you can change or remove the
maximum volume limit.
Note: The volume level may vary if you use different earphones or headphones.
To remove the maximum volume limit:
1 Connect iPod shuffle to your computer.
2 In iTunes, select iPod shuffle in the Source pane.
3 Click the Settings tab.
4 Deselect “Limit maximum volume.”
Enter the password, if required.
Note: If you forget the password, you can restore iPod shuffle. See “Updating and
Restoring iPod shuffle Software” on page 26 for more information.

When I try to start Enterprise Manager 10g after I rename the machine.

OS is Sun Solaris and Oracle version is 10.2.0.1 .
Renaming the machine, I can't start Enterprise Manager by type "emctl start dbconsole" but system show bottom error.
OC4J Configuration issue. [Oracle_home]/oc4j/j2ee/OC4J_DBConsole_Error occurred dur
ing initialization of VM
java.lang.Error: Properties init: Could not determine current working directory.
_[SID_NAME] not found.
How to fix?
And in log file I found "WARNING: inbound connection timed out (ORA-3136)" message many time.
Sometimes clients can't connect to database server although I can connect inside normally so I must reboot machine.
What is a problem and how to fix both problems?
Thankyou

Check Settings>Messages>Show Subject Field and make sure it's set to "Off".

Install OEM 12c fails on "start oracle management service". win2008

Windows Server 2008 R2 Enterprise SP1 x64
Oracle Database 11g release 11.2.0.3.0
I install OEM 12c(12.1.0.3) following this manual: Installing Enterprise Manager System
before start i've installed WebLogic Server 10.3.6 and aplied 2 patches specified in this manual
installation type is advanced, small, so i have created database from the appropriate template
i also installed cygwin and started ssh-service
the installation of OEM process fails on 73% "start oracle management service" with this message:
INFO: oracle.sysman.top.oms:Starting OMS ...
INFO: oracle.sysman.top.oms:Executing command: cmd /c set NEED_EXIT_CODE=1&&C:\Oracle\Middleware\oms\bin\emctl.bat start oms
INFO: oracle.sysman.top.oms:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.oms:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.oms:Windows service OracleManagementServer_EMGC_OMS1_1 failed to be started
INFO: oracle.sysman.top.oms:Oracle Management Server is Down
INFO: oracle.sysman.top.oms:Please check C:/Oracle/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log for error details
SEVERE: oracle.sysman.top.oms:Starting of OMS failed.
in C:/Oracle/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log i got this:
2013-09-06 12:24:27,012 [main] ERROR commands.BaseCommand logAndPrint.620 - Oracle Management Server Could Not Be Started
Check EM Server log file for details: C:\Oracle\gc_inst\user_projects\domains\GCDomain\servers\EMGC_OMS1\logs\EMGC_OMS1.out
2013-09-06 12:24:27,012 [main] INFO commands.StartCommand startOMS.337 - startOMS finished with result: 1
2013-09-06 12:24:30,974 [main] INFO commands.StartCommand startOMS.371 - net start return code is 2
2013-09-06 12:24:30,974 [main] ERROR commands.BaseCommand logAndPrint.620 - Windows service OracleManagementServer_EMGC_OMS1_1 failed to be started
2013-09-06 12:24:34,094 [main] INFO commands.BaseCommand printMessage.404 - statusOMS finished with result: 8
2013-09-06 12:24:34,094 [main] ERROR commands.BaseCommand logAndPrint.620 - Please check C:/Oracle/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log for error details
and in C:\Oracle\gc_inst\user_projects\domains\GCDomain\servers\EMGC_OMS1\logs\EMGC_OMS1.out this:
<06.09.2013 12:24:01 ICT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 23.25-b01 from Oracle Corporation>
<06.09.2013 12:24:01 ICT> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 13349651 Thu May 24 10:18:28 IST 2012
WebLogic Server Temporary Patch for BUG14482558 Fri Jan 11 11:20:16 IST 2013
WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<06.09.2013 12:24:03 ICT> <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:Error: Failed to get value from Standard Input
Enter password to boot WebLogic server:
<06.09.2013 12:24:04 ICT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: Booting as admin server, but servername, EMGC_OMS1, does not match the admin server name, EMGC_ADMINSERVER
     at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:67)
     at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
     at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
     at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
     at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
     at weblogic.Server.main(Server.java:71)
>
<06.09.2013 12:24:04 ICT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
wlst:
wls:/offline>
what I did wrong? how to start WLS server?

Hi,
First of all with EM 12.1.0.x any version you are not required to install wls separately, we have single installer for em and wls. Is there any specific reason you installer wls separately?
Coming back to your issue: can you check
%OMS_HOME%\BIN>emctl istart oms completes successfully.
%OMS_HOME%\BIN>emctl istop oms completes successfully.
Also open an SR with Oracle support and share the number. We should debug such issue through SR so that we can share logs and come find a root cause.

ORA-27211: Failed to load Media Management Library after Update to HP DP 6

Hi,
after an Upgrade to Version 6.0 from the Backupsoftware HP Dataprotector i can't run RMAN Backup's anymore, because something is wrong with Linking of the MML.
BS: SLES 8 / Kernel 2.4.21-251-smp
Oracle: 9.2.0.5
I try this RMAN Statement:
RMAN> run
2> {
3> allocate channel 'c1' device type sbt_tape
4> PARMS='SBT_LIBRARY=/opt/omni/lib/libob2oracle8.so';
5> }
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on c1 channel at 10/22/2007 16:04:24
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Additional information: 2
the tracefile (i try RMAN Test with and without PARM Parameter):
Dump file /u01/app/oracle/product/9.2.0/rdbms/log/khv_ora_11745.trc
Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning option
JServer Release 9.2.0.5.0 - Production
ORACLE_HOME = /u01/app/oracle/product/9.2.0
System name: Linux
Node name: dbtheresien3
Release: 2.4.21-251-smp
Version: #1 SMP Thu Sep 23 17:22:54 UTC 2004
Machine: i686
Instance name: KHV
Redo thread mounted by this instance: 1
Oracle process number: 35
Unix process pid: 11745, image: oracle@dbtheresien3 (TNS V1-V3)
*** SESSION ID:(72.47988) 2007-10-22 15:53:24.684
Failed to load SBT library libobk.so
*** 2007-10-22 15:57:35.736
Failed to load SBT library /opt/omni/lib/libob2oracle8.so
*** 2007-10-22 15:58:16.009
Failed to load SBT library /opt/omni/lib/libob2oracle8.so
*** 2007-10-22 16:02:46.904
Failed to load SBT library libobk.so
*** 2007-10-22 16:04:24.761
Failed to load SBT library /opt/omni/lib/libob2oracle8.so
All Infos i found tells me:
- that i doesn't need to restart the Instance of the Database
- i must only remove the old link in $ORACLE_HOME/lin/libobk.so and take a link new link $ORACLE_HOME/lin/libobk.so to the new Backuplibrary in /opt/omni/lib/libob2oracle8.so
But this doesn't work!
Any usefull Hints?
I always try the RMAN Command's:
CONFIGURE DEVICE TYPE 'SBT_TAPE' CLEAR;
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' clear;
Nothing help...
My last Idea ist to reboot the whole Database, but this is a little difficult 8-)

hi,
all Systems are 32 Bit (Database Oracle 9.2.0.5 and DP6.0).
What do you mean with "what is Version DP6" ?
HP Dataprotector 6.0 with Patch DPLNX_00013
thx
Thomas

Failed to start a managed process after the maximum retry limit

Similar Messages

Maybe you are looking for