[Opt 31-67] Problem: - what does this mean?
Hi All,
VIVADO 2015.2, Linux x64, Microblaze core is on the canvas (not generated stand-alone) with typical settings that were NEVER modified. This following error popped up in the very last synthesis I have made.
[Opt 31-67] Problem: A LUT3 cell in the design is missing a connection on input pin I2, which is used by the LUT equation. This pin has either been left unconnected in the design or the connection was removed due to the trimming of unused logic. The LUT cell name is: system_i/mb_mba/U0/MicroBlaze_Core_I/Performance.Core/Data_Flow_I/Operand_Select_I/LOCKSTEP_Master_Out[0]_INST_0_i_3.
Thank you
Vlad
Hi Deepika,
I think I have found the cause of the issue. Sigh... It has to do with the other post I made earlier, a boolean IPI parameter for Verilog designs.
Because of that issue, I have hard-coded the parameter in the HDL instead of making it an IPI, and it caused a cloud of logic to be removed from the IP, leaving a dangling connection, which of course cause this issue.
Thanks for your response
Vlad
Similar Messages
-
Screen problem what does this mean ?
have to restart my iphone several times...once a day, or every two days...sometimes one a week,
how can i do to avert this ?Settings>General>Accessibility>Invert Colors>Off.
-
Trying to upgrad to Mountail Lion and got an error message : 403 Forbidden. What does this mean? What can I do? I had no problem when I upgraded to Lion.
403 Forbidden HTTP status code in response to a request from a client for a web page or resource to indicate that the server refuses to allow the requested action. In other words, the server can be reached, but the server declined to allow the requested access.
http://en.wikipedia.org/wiki/HTTP_403
Could you be using a different Apple ID oe such? -
What does this mean, and how do you fix it?
"There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender."
Trying to install iTunes 10.7, first attempt; downloaded and ran with everything closed, seccond atttempt; just click on run, third attempt; ran upgrade with iTunes open. All of the results were the same.
Is there something wrong with the iTunes 10.7 Windows installer package?Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
What does this mean: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem"? I tried reinstalling, but I get an error message saying something about permission to launch services.
Solving MSVCR80 issue and Windows iTunes install issues.
-
I downloaded a song that is not playing. When i click to report a problem it gives me an error that says "To many HTTP redirects". What does this mean and how do I fix it? Thank you!
The following support articles should help:
* https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component
* https://support.mozilla.com/kb/AUS+Update+XML+File+Malformed+200 -
What does this mean when I received this message on my iMac - "Your Computer was restarted because of a problem"?
3.2 GHz Intel Core i5,8 GB 1600 MHz DDR3,NVIDIA GeForce GTX 675MX 1024 MB,Software OS X 10.9 (13A603)Did you have a system freeze or crash?
Did you intend to post that on the Final Cut Pro X forum?
Russ -
What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project: - There appears to be a broken asset in your project. Correct this problem before burning this project."
It means that iDVD has found a problem with one of the movies added to the project. Did you edit the movie after it had been added to the project.
Create a new project and add your assets, movies, slides, etc. again and follow this workflow to help ensure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT -
"encountered problems, Cannot convert file" what does this mean?
"Encountered problems, cannot conver file" What does this mean?
Hi 123456Oosse,
I would like to help!
In what regard are you referring to? Are you experiencing this every time you are trying to convert your pdf? Have you tried other pdf's?
A few other questions:
What is the file size? (there is a 100 MB limit)
What is the original doc type of the pdf?
What are you converting it to? excel? word?
Looking forward to yoru response!
Regards, Stacy -
Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2007 iMac which is running 10.6.8. What does this mean? I've attached some screen shots below.
Also experiencing some funky issues with my wireless keyboard. With new batteries, it will just stop functioning. Certain keys intermittently won't work. Also the fans go on as soon as I turn the computer on - some times they stay on and sometimes they don't. Ever since upgrading the operating system - I've been having many issues with this iMac. Not happy. Any answers out there?Thanks for your reply LexSchellings, There is no disc in the drive and I went through the suggestions you put forward on the phone with Apple support without any luck. I can put a disc in but it pops straight back out again without registering on finder.
The idea of using an external drive was to enable me to avoid the cost and loss of productivity whilst machine in repair... if I have to take it in to get the old drive removed than I might as well have a new internal drive put in, although I do worry about the reliability of these apple drives given my experience with this one coupled with my limited online research ... on line forums seem to be full of people with the same problem (although perhaps searching such forums is bound to make it seem a common problem as users with perfectly working machines are less likely to post (?)) Your reply suggests that no external drive will work whilst the existing drive is in place.
As a postscript: I do realise that this is a user forum ...my secondary question was asking if anyone knows how to put forward a case/complaint to Apple... I can't find a link on the support page that would enable me to do so and I was wondering if anyone on this user forum had any ideas/experience.. -
I received this error message when trying to use my time capsule. Macbook Air.sparsebundle already is use. What does this mean?
First, restart the MacBook Air and the Time Capsule. In most of the cases, this solves the problem.
If not, see > http://pondini.org/TM/C12.html -
I am re-installing itunes on a PC Win 7 and have the message: "apple mobile device failed to start verify that you have sufficient privilegesto start system services" what does this mean? how do I check and rectify? I am already logged onto the PC as administrator
I am having this same problem. I took Kappy advice on restarting the Apple Mobile Device Service, however that did not work. I got this message in a pop up window that came up immediately.
Windows could not start the Apple Mobil Device Service on local computer.
Error 1053 The service did not respond to the start or control request in a timely fashion.
I have already uninstalled itunes, all the related programs and I cannot reinstall, this Apple Mobil Device message stops the install.
Can anyone please help? -
I cant download itunes on my computer because it says " service 'apple mobile device' failed to start. verify that you have sufficient privileges to start system services. what does this mean? how do you verify this?
I am having this same problem. I took Kappy advice on restarting the Apple Mobile Device Service, however that did not work. I got this message in a pop up window that came up immediately.
Windows could not start the Apple Mobil Device Service on local computer.
Error 1053 The service did not respond to the start or control request in a timely fashion.
I have already uninstalled itunes, all the related programs and I cannot reinstall, this Apple Mobil Device message stops the install.
Can anyone please help? -
Given file name or path contains Unicode or double-byte characters. Retry using ASCII characters for filename and path
What does this mean? It is happening when I try to publish an OAM for Dreamweaver.
Also: How can I specify the browser in Edge Animate? It is just going wherever. Are there no Preferences for Edge Animate?
BTW. Just call it Edge. Seriously. Do you call it Illustrator Draw? Photoshop Retouching?No, my file name is mainContent.oam
My project name is mainContent.an
This error happens when I try to import into Dreamweaver. Sorry, I wasn't clear on that earlier.
I thought maybe it was because I had saved my image as a png. So re-saved as a svg, still get the error.
DO I have a setting is Dreamweaver CC that is wrong? Should I try this in Dreamweaver CS6? I might try that next.
Why is this program so difficult? I know Flash. I know After Effects. I can work the timeline part just great. It's always in the export that I have problems.
On a MacPro, 10.7.
Are you an Adobe person or just a nice helper? -
I keep receiving an error message when I try to Sync my I phone 4. It says Can't Sync 1450. What does this mean? I've had this phone for over a year with no problems.
Yep. Tried that. And just did it again.
Still no joy.
Maybe you are looking for
-
Retrieve Parent Child Sub-Child recors in SQL Query
I've a self reference table and it has Parent-Child-Subchild relation. I'm getting an output (from second answer http://stackoverflow.com/questions/16031000/get-records-containing-all-the-child-records-in-sql-server) as expected, but it's displaying
-
Hello just wanted to know if there is a car adaptor or plug etc what I can use to charge my Qosmio F10 laptop in the car as im of on holiday soon and it will run out of battery after 2 hours or so , so wondering if theres anything like that to keep i
-
Custom-built template not getting picked up in POAPPROVAL email
Hi Guys Can anyone help? I am trying to setup a template for an email going out to Suppliers from the i-Procurment system. I have setup a message called try1 in the System: Mailer workflow using a copy of the O_OPEN_MAIL_FYI message. I then setup an
-
Identifying colors in Color palette in Keynote
Hi! I'm new to Keynote and trying to figure out how to identify the color number/values (RGB, CMYK, hex number, ANYTHING!) of a color in the Colors palette. I'm also wondering whether there's a way to type in the color values of the specific color I
-
H.264 slideshow from iPhoto looks terrible in QT X
What is going on here? I just exported a slideshow from iPhoto '09 as 1280x720 h.264. Quen I play this with quicklook or with QT X it looks terrible. Colors are washed out and desaturated. However, if I view it in QT 7 Pro on the same machine, the mo