Options in infopackage
Hi All,
I have noticed that there are 3 options in populating the selection criteria in the data selection tab in an infopackage.
They are
1. ABAP routine
2. OLAP variable
3. Free temporal selection.
I have an idea about the ABAP routine, but have no idea about the other two options. Can anyone please explain me in detail or atleast provide me any links the documents related to this.
Points are assured.
Thanks in advance...
hi friend,
check out these links too.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/370d40312b1e07e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/content.htm
check out this thread too...
Need few routine examples in BW
hope it would help.
Similar Messages
-
ABAP Routine for 0FISCPER slect options in InfoPackage
Hi,
I am trying to write an ABAP Routine for 0FISCPER as select options (range) dynamically.
Ex:
0FISCPER selection for this year as 001.2008 to 012.2008
0FISCPER selection for next year as 001.2009 to 012.2009.
Now we are changing InfoPackage every year manually, so I need to write a routine for 0FISCPER in InfoPackage to handle dynamically every year
Thanks,
SK.Hi
write an ABAP routine to get that value..But are you getting any planned data(why you want till end of the year...till infopackage runs is o.k i think, if you don't have planned data)...Any way you can check the below code, which can be useful...
You can see the below code at->your infopackage selections>Ty-->choose variable type as 6 and enter any ABAP routine name( to create) and then there is a button on the application tool bar called 'routine info'..this give you the following information...
Definition
You can define complex selections for InfoPackages and control the automatic deletion of requests from InfoCubes in the scheduler, by using routines.
Routines are processing blocks in ABAP programs that consist of a pre-defined data declaration section and an ABAP subroutine (form routine). In the subroutine you can use all of the ABAP programming functions.
You can use the following routines for making selections in InfoPackages:
1. Selection routines for fields, on the Data Selection tab page
2. Selection routines for file names, on the External Data tab page
3. Selection Routines for selecting the from and to dates for time-dependent data, on tab page Update
4. Selection routines for determining old requests to be deleted after successfully loading a new request, on the Data Target tab page
Program frame:
After you have called up the Editor for routine maintenance, you get the following program frame:
1. Selection routines for fields, on tab page Data Selection:
program conversion_routine.
'$*$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA: ...
$$ end of global - insert your declaration only before this line -
FORM COMPUTE_<Fieldname>
tables l_t_range structure rssdlrange
changing p_subrc like sy-subrc.
$$ begin of routine - insert your code only below this line -
data: l_idx like sy-tabix.
read table l_t_range with key
fieldname = <Fieldname>.
l_idx = sy-tabix.
modify l_t_range index l_idx.
p_subrc = 0.
$$ end of routine - insert your code only before this line -
ENDFORM.
2. Selection routines for file names, on tabstrip External Data:
FORM compute_flat_file_filename
changing p_filename like rsldpsel-filename
p_subrc like sy-subrc.
$$ begin of routine - insert your code only below this line-
p_filename =
p_subrc = 0.
$$ end of routine - insert your code only before this line-
ENDFORM.
3. Selection routines for selecting the from and to date for time-dependent data, on tabstrip Update:
form compute_time_dependent_dates
changing p_datefrom type d
p_dateto type d
p_subrc like sy-subrc.
$$ begin of routine - insert your code only below this line-
p_datefrom =
p_dateto =
p_subrc = 0.
$$ end of routine - insert your code only before this line-
ENDFORM.
4. Routines for determining the old requests to be deleted after successfully loading a new request, on tab page Data Targets:
form compute_<InfoCube-Name>
tables l_t_request_to_delete structure rsreqdelstruc
using l_request like rsreqdone-rnr
changing p_subrc like sy-subrc.
*Insert Source Code to decide if requests should be deleted.
*All Requests in table l_t_request_to_delete will be deleted
*from Infocube <InfoCube-Name>.
*Add new requests if you want to delete more (from this cube).
*Remove requests you did not want to be deleted.
$$ begin of routine - insert your code only below this line-
loop at l_t_request_to_delete.
endloop.
clear p_subrc.
$$ end of routine - insert your code only before this line-
ENDFORM.
Note:
Those fields flagged with <...> are dependent on the selection fields and are filled automatically by the system when you call up the Editor.
Procedure
Make the following entries:
1. Between $$ begin of global ... and $$ end of global ... you can define data declarations. These are the declaration sections for the local data in the routine. This data is only visible in the routines.
2. The subroutines begin with FORM and end with ENDFORM.
The subroutines for the particular routines are:
Selection routines for fields on tab page Data Selection: FORM COMPUTE_<Field name>
Selection routines for file names on tab page External Data : FORM compute_flat_file_filename
Selection routines for selecting the from and to dates for time-dependent data on tab page Update: FORM compute_time_dependent_dates
Routines for determining old requests to be deleted after successfully loading a new request on tab page Data Target: FORM COMPUTE_<InfoCube-Name>
The subprograms have the following parameters:
Subprogram FORM COMPUTE_<Field name>:
l_t_range
In the table l_t_range the routines for all selection fields that are filled, or have a routine, are made available.
The routines are executed in the scheduler last of all and therefore, you can change all the selections that you have carried out previously.
p_subrc
Using the variable p_subrc you can report errors to the scheduler. p_subrc <> 0 signals an error and means the data request is terminated.
Subprogram FORM compute_flat_file_filename:
p_filename:
You give the name of the file that is to be loaded in parameter p_filename.
This is useful if your file name contains date dependencies that should be determined by sy-datum and calculated during runtime.
p_subrc
You can inform the scheduler of an error with variable p_subrc. p_subrc <> 0 signals an error and means that the data request is terminated.
Subprogram FORM compute_time_dependent_dates:
p_datefrom and p_dateto
Fill these parameters with the from and to dates for time-dependent master data and texts.
p_subrc
You can inform the scheduler about an error using variable >LS>p_subrc. p_subrc <> 0 signals an error and means the data request is terminated.
Subprogram FORM COMPUTE_<InfoCube-Name>:
l_t_request_to_delete
You give the request number of the request that is to be deleted in parameter l_t_request_to_delete. You can also delete requests from the table. These are then not deleted.
p_subrc
You can inform the scheduler about an error with the variable p_subrc. p_subrc signals an error and means the data request is terminated.
3. Insert your program code for the routines between $$ begin of routine ... and $$ end of routine ... so that the respective subprogram variables are supplied with the corresponding values.
4. Check the syntax of your routine with the Check function.
5. You can then transfer the routine with the Save function.
You end routine maintenance when you exit the Editor.
Hope it helps
Thanks,
Teja -
Detete content of the cube option in infopackage not visible
Hi All,
We are using BW7.0. I have a requirement and where I have to create infopackge and DTP. When I load every time it has deleted the content of the Cube and load the data to the data target. I have the option to delete the content of the cube in the process types of process chains. But I donu2019t want to use the process chain and with out process chain I need to achieve this requirement.
Can any one suggest me to achieve this?
Thanks
SravsHello,
Please note that with BI 7 the concept of data loading has changed.
The infopackage no longer pertains to the data target.
So there is no way of achieving this using infopackage.
Its SAP recommended methodology to use process chain. Any reasons why you cant use it.
Regards,
Shashank -
Regarding selction options in infopackage
Dear experts,
I want to filter from source 5000 Purchase orders for load (Since loading all will dramatically increase the load time and not needed)
Is it possible for me to restrict it for 5000 POs at infopackage level? Is manual entry the only way or I can do it by loading a file containing the PO list or by selecting from a list..
Thanks in advance.
Rajarathnam.SHi,
Check it in RSCUSTV6 Tcode.
If you have specific number range , then you can write Routine in InfoPackage for PO char.
Thanks
Reddy -
Infopackages and IPG--- Scheduling Options
Hi, BI Experts
Suppose there is a infopackage with a specified after event in its scheduling options and may be with some subsequent process.
And this infopackage is also scheduled through IPG (or Process Chain) -
immediate start at particular time i.e. it should start at particular time.
Then What will happen in IPG (or Process Chain) when scheduled time comes.
Will it wait for the after event present in scheduling options of infopackage or it will directly start the infopackage as on time of IPG (or Process Chain) .
Please explain in detail and also explain concepts may b related to this.Hi Arun,
Settings in Process chain takes effects. Process chain settings overwrites infopackage settings.
P.S : Its advisable to use different infopackages.
Hope it Helps
Srini -
Problem in seeing the details in Monitor of Infopackage......
Hi,
I am doing INIT without data transfer.
When I go in monitor and try to see the details I not able to see any thing , its not displaying any of the TABS of monitor like Hedear , Status and Details.
When I go to data target and try to open from again it dont displays anything.
Can anybody let me know if have faced similar problem?
Thanks , JeetuHi Jeetu,
Please can U check the Scheduling options inthe Infopackage screen, plz ensure that the job has been scheduled either immediately or to a specific time period.
If it was a immediate run, plz check the job status in SM37 for both source system and BW. If the job has ran successfully then you should get some logs for that, U will not find logs unless until the job hasn't ran (or) started.
Hope this should help U.
Regards,
Syed -
Execute Infopackage Through BAPI Using Excel Macro (BAPI_IPAK_START)
Hi everyone,
I have a problem when execute infopackage through BAPI using excel macro. I have create a button in macro. When this button is clicked, BAPI for trigger InfoPackage will executed (BAPI_IPAK_START) and this button will disabled.
After this process completely done (traffic indicator for the request is green in update rules), the button will enabled again.
Here the subroutine or pseudocode that i will write :
Private Sub ClickButton()
Begin
1. ThisButton.Activated = False --> Disabled Button
2. Call BAPI/custom Function Module to execute InfoPackage (BAPI_IPAK_START)
4. ThisButton.Activated = True --> Enabled Button
End
The problem is i need some statement like this between statement no 2 and statement no 4
Statement That I Want :
3. Wait Until BAPI Execute Completely
So user can click this button again only after the process is finished completely. I don't know how to do this in macro (in ABAP i know i can use "WAIT ... SECOND"), others said this can be done using event in schedule option at infopackage. Anyone,please help me.
Thank you.
Regards,
Satria BEnter that req number in RSRQ and monitor the load
or right click on the DS - manage - you will req in yellow status which is in progress and you can click on the ...takes you monitor screen
Edited by: Srinivas on Jul 6, 2010 7:51 AM -
BI 7.0 delta problem in infopackage - DTP
I have my DTP set as delta going to a DSO.
FLOW -
Generic data source (numeric pointer) to DSO to cube.
How do I setup infopackages between data source (PSA) and source system.....
In infopackage, I am getting only 2 options -- Init or full load. How do create delta infopackages...
Thanks.
LisaHi Lisa,
U need to maintain a separate Infopackge for the Delta. Once u take the init then u can able to see the Delta option in Infopackage..
In BI7.0 for loading the data from PSA to the target u need to use the DTP in place of the Infopackage as in the case of 3.x..
Infopackage's are used to load the data till PSA.. and from PSA the DTP will come into picture..
Thanks
Hope this helps -
Hai l how to find weather our infopackage is used in any infopackage group?
hai is there any way to find out weather our infopackage is used in any infopackage group.Help is appreciated.
Thanks,
Mark.Hi Steve,
go to RSMON Transaction there you can find all the infopackage groups and there you can check whether your infopackage is present there or not.
and also if it is included in any infopackage group or any process chain you can find the option like "infopackage is included in the infopackage group or process chain" in the schedule tab.
Hope its clear.
assign points if its helpful....
Regards,
ashok -
Hi Experts,
I have doubt regarding Deletion option in Infopackage.
If we set the option for request deletion for same selection in an Infopackage, will it delete the previous request with same selection in the manage screen or just the data and will leave the request ID in manage screen??
DVHi,
It will delete the data as well the request ID.
*Hope it helps. -
Dear All,
First let me wish you a very happy and prosperous New Year.
I have one clarification here,
User was running a report with extensive selection,unfortunately the user got the error "TSV_TNEW_PAGE_ALLOC_FAILED"
Then there was shortdump in ST22, saying that " No more storage space available for extending an internal table"
I would like to know that which query was this user running during that time. then i can investigate further what can be done to avoid this problems.
I thank in advance.
Rgds,
Sin
Edited by: sinner icici on Jan 3, 2008 10:57 AMHi,
TSV_TNEW_PAGE_ALLOC_FAILED - No more storage space available for extending an internal table.
It is purely the memory issue. you can resolve this by reducing the data selections. For the temporary solution remove the OLAP variable in the data selection if its there and run with less selection It may help and try to use the option in infopackage scheduler as PSA only and Update subseqently in data targets
SAP Note 425207 - SAP memory management, current parameter ranges
SAP Note 972889 - RMCENEUR: Short dump TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Thanks,
JituK -
Help - Step by Step Material on How to load Data from flatfile to BI 7.0
Hi BI Experts,
Can any one send the document or a pdf file on how to load data from flat file to BI 7.0 in step by step process.
Thanks in Advance
Regards
Ramakrishna Kamurthy
+91-99631010731. On log on you will be placed in the SAP Easy Access Strategic Management/ Business Analytics
1. You see the screen divided in two segments.
2. Follow the left segment.
3. Click on the Business Information Warehouse.
4. Sub Menu  BW Administration.
5. You find various entries in it.
6. Now double click on UG_BW_RSA1-Administrator Workbench
2. Creation of Info Area
1. Click on InfoObjects.
2. Now in the right hand side screen select the InfoObjects (First item on the top). Right click the mouse and select Create InfoArea.
3. A dialog box pops up.
4. Give the InfoArea as ZIVY_Iarea.
5. Give the Long Description as ZIVY Info Area.
3. Create a Catalog:
1. Select the InfoArea just created ZIVY_Iarea.
2. Right click the mouse pointer and select the option Create InfoObject Catalog
3. A dialog box pops up.
4. Give the InfoObjCat = ZIVY_CHCAT
i. Description = ZIVY Character Catalog
ii. InfoObjectType: Check the Character. ( As we are creating the master data, check the Character)
iii. Now at the bottom of this dialog box you see an icon called CREATE. Click this icon.
1.
1. The next screen in front of you is the Edit InfoObject Catalog.
2. Simply click the activate icon present on the Application Toolbar.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CUST and
i. Description Customer Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CUST: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP .
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_CUST, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_CITY
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CITY and
i.
Description
Customer
City Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CITY: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 25
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CITY, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_STATE
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_STATE and
i.
Description
Customer
State Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_STATE: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 25
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_STATE, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_CTRY
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CTRY and
i. Description Customer Country Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CTRY: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data
2. Check the With Texts and make suitable Text Table Properties.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
1. Creation of Attributes and InfoObject from the ZIVY_CUST InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_CUST. Double click the InfoObject ZIVY_CUST.
6. You find the screen Change Characteristic ZIVY_CUST:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_CITY and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Similarly, type ZIVY_STATE, ZIVY_CTRY.
11. Now, we will create another InfoObject ZIVY_TEL, from here.
12. So type ZIVY_Tel and enter the ENTER KEY.
13. A dialog box pops up, and request you If you want to Create an InfoObject
14. Select Create Attribute As Characteristic and click the check mark.
15. Another window pops up. Give the following:
i. In the General Tab:
1. Long Description: ZIVY Telephone Number
2. Short Description: ZIVY Telephone Number
3. DataType : NUMC
4. Length : 10
5. Uncheck Attribute Only
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies
iv. Now click the TICK MARK
1.
1. Click the ACTIVATE
2. A window pops up.
i. Select activate dependent InfoObjects.
ii. Click the Check Mark.
1. Creation of InfoObject: ZIVY_DATE
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_DATE and
i. Description ZIVY Date.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_DATE: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: DATS
2. Length: 8
ii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
2. Create ZIVY Application Component:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Right click the mouse pointer and select the entry Create Application Component
5. A window pops up.
i. Application Component: ZIVY_APPCOMP
ii. Long Description : ZIVY Application Component
iii. Click the check mark.
1. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_CUST
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the Customer Info Object.
2. Select the Customer Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_CUST
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_CUST,
3. Second field is ZIVY_CITY.
4. And so on.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_CUST MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_CUST,
4. Third field is 0TXTMD.
5. Click the Transfer Rule adjacent to 0LANGUAGE
6. A window pops up.
a. Check the CONSTANT and give the value as EN
b. Click the TICK MARK.
7. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_CUST_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_CUST_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_CUST alias Customer Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_CUST_ATTR.
ii. Select ZIVY_CUST_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_CUST alias Customer Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_CUST_TEXT.
ii. Select ZIVY_CUST_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_MAT and
i. Description ZIVY Material Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_MAT: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP 17).
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_MAT, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_GROUP
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_GROUP and
i. Description ZIVY Material Group.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_GROUP: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data
2. Check the With Texts and make suitable Text Table Properties.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_GROUP, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_COLOR
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_COLOR and
i. Description ZIVY Material Color.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_COLOR: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_COLOR, by clicking the icon ACTIVATE.
2. Creation of InfoObject from the ZIVY_MAT InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_MAT. Double click the InfoObject ZIVY_MAT.
6. You find the screen Change Characteristic ZIVY_MAT:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_GROUP and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Similarly, type ZIVY_COLOR.
11. Click the ACTIVATE
3. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_MAT
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the ZIVY Material Info Object.
2. Select the ZIVY Material Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_MAT
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_MAT,
3. Second field is ZIVY_GROUP.
4. Third field is ZIVY_COLOR.
5. Check the mapping. If you dont see the mapping.
6. Click on the empty row in the group Assign InfoObjectField, the box to the right.
7. Type ZIVY_GROUP, ZIVY_COLOR.
8. Check the transfer rules.
9. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_CUST MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_MAT,
4. Third field is 0TXTSH.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_Material_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_Material_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_MAT alias ZIVY Material Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_MAT_ATTR.
ii. Select ZIVY_MAT_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_Material_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_MAT alias ZIVY Material Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_MAT_TEXT.
ii. Select ZIVY_MAT_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_MATERIAL_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_SPER and
i. Description ZIVY Sales Person Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_SPER: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 20
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP 24).
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_SPER, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_SREG
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_SREG and
i. Description ZIVY Sales Region.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_SREG: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 20
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_SREG, by clicking the icon ACTIVATE.
2. Creation of Attributes from the ZIVY_SPER InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_SPER. Double click the InfoObject ZIVY_SPER.
6. You find the screen Change Characteristic ZIVY_SPER:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_SREG and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Click the ACTIVATE
3. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_SPER
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the ZIVY Sales Person Info Object.
2. Select the ZIVY Sales Person Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_SREP
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_SPER,
3. Second field is ZIVY_SREG.
4. Check the mapping. If you dont see the mapping.
5. Click on the empty row in the group Assign InfoObjectField, the box to the right.
6. Check the transfer rules.
7. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_SREP MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_SPER,
4. Third field is 0TXTSH.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_SREP_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_SREP_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_SPER alias ZIVY Sales Person Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_SPER_ATTR.
ii. Select ZIVY_SPER_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_SPER alias ZIVY Sales Person Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_SPER_TEXT.
ii. Select ZIVY_SPER_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii.
Browse the data.
1. Creation of InfoObject Catalog with Key Figures:
1. Select the InfoArea just created ZIVY_Iarea.
2. Right click the mouse pointer and select the option Create InfoObject Catalog
3. A dialog box pops up.
4. Give the InfoObjCat = ZIVY_KEYCAT
i. Description = ZIVY Key Figures Catalog
ii. InfoObjectType: Check the Key Figures.
iii. Now at the bottom of this dialog box you see an icon called CREATE. Click this icon.
1.
1. The next screen in front of you is the Edit InfoObject Catalog.
2. Simply click the activate icon present on the Application Toolbar.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_KEYCAT,which is ZIVY Key Figures Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_AMT and
i. Description ZIVY Amount Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Create Key Figure ZIVY_AMT: Detail.
2. In this screen the following fields have to be modified:
i. In the Type/ Unit Tab
1. DataType: Amount
2. Unit/ Currency = 0Currency
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_AMT, by clicking the icon ACTIVATE.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. -
Hi,
When we create info package on 3.x data source, we can find the setting like Separator for Thousands and 'Character Used for Decimal Point' in info package but where can I find these setting in info package when it is created on 7.0 data source?
Thanks in advance.Hi,
You will never get such option in Infopackage level for any datasource be it 3.X or 7.0 except for Extraction tab of Flat File data source.
The option for decimal character and separator comes in the EXTRACTION tab of the Flat File data source IP only and no where else. I think you are getting confused with this
In the flatfile data source you require these settings to be done before hand so that while extraction system can recognize the correct field values and field sequence.
Hope this clarifies your doubts.
Navesh
Edited by: navsamol on Nov 16, 2011 12:10 PM -
hi gurus,
In processing option of InfoPackage we have the fallowing options.
1:PSA and then into DataTargets (package by package)
2:PSA and DataTargets (package by package)
what is the technical difference between these two.Give me the technical reason about which one is best.
regards
balaji.pHi
First Option:
In PSA and then at once in InfoCube or InfoObject
Use
Select this field if you want to update data first to the PSA and then want to post it to InfoCubes or the master data table of an InfoObject.
If there is an error while posting to the InfoCubes or the master data table of an InfoObject, the data is in the PSA and you can post the data again from there.
second Option
Select this field if you want to update data to the PSA and post it to the InfoCubes or master data table of the InfoObject in parallel.
When you post data to the PSA and InfoCubes or the master data table of an InfoObject in parallel, a second parallel process is started to post data to the InfoCubes or the master data table of an InfoObject, as long as there are sufficient free dialog processes.
If there is an error while posting to the InfoCube or master data table of an InfoObject, you can post the data from the PSA again.
Hope it helps
Thanks
Teja -
제품 : ORACLE SERVER
작성날짜 : 2004-08-13
SCOPE
8.1.6 이상의 Standard Edition 부터 지원이 되는 기능입니다.
Subject: Parallel Load - space usage.
I have put together a short summary of how Parallel Load handles
storage allocation in 7.1 which I am going to send to a customer.
This could also quickly turn into a bulletin or PR entry
(if one doesn't already exist).
I'd appreciate if people could review and give corrections/enhancements.
Here is how storage allocation works with parallel loads.
For each parallel loader session, Oracle
1) creates a temporary segment with the INITIAL and NEXT
from the table that is being loaded, and in the datafile
designated by the FILE option.
2) When a load is complete, the final extent used by that
parallel load is trimmed back to the last block which it
used.
3) Lastly, the extents belonging to the temporary segments
are then converted to extents belonging to the table
being loaded.
This creates a couple of problems:
* If your INITIAL and NEXT are different for the table,
then you will end up with multiple extents sized the
same as INITIAL, which doesn't follow general table
growth patterns.
* Extent sizes are not predictable for the last extent of
each load. This can lead to tablespace fragmentation.
What to do about this?
* Size INITIAL and NEXT to be the same.
This will eliminate the first problem listed.
* Oracle 7.2 will have a feature in to specify the storage
parameters used by the parallel load (bug 187319):
OPTIONS (STORAGE=(MINEXTENTS n
MAXEXTENTS n
INITIAL n K
NEXT n K
PCTINCREASE n))
* Enhancement Request 236552 has been filed to allow the
user to select no trimming of the extents.Hi Karen,
The number of workprocess (Dialog/Background) could be reduced also by selecting the loading options in InfoPackage.
In InfoPackage Processing tab, there are various loading options,
PSA & Then into data target (Package by Package) - This option uses only one process at a time. One data package is lifted from the Source System by a background process to PSA, and then the same process lifts it from PSA to datatarget.
PSA & data target in parallel (Package by Package) - This option uses two process at a time. One data package is lifted from the Source System by a background process to PSA, and then another process lifts it from PSA to datatarget. The first process same time, gets busy in lifting another package from Source System to PSA.
The first option is good, but takes more time to load data than the second one, so there is a tradeoff.
Also it is good if you use another process in process chain to activate the ODS instead of setting it up on automatic activation.
Please let me know if you need any more help.
Regards,
Pankaj
Maybe you are looking for
-
Can I set up a 2nd iTunes account for a new iPod on my iMac?
How do you set it up? If so, can the 2 accounts share music? If they can share music, does it have to be the entire library or can you pick and choose what you want to share? Lastly, can they have 2 different cards or iTunes cards linked to them?
-
Leopard and kernal panic after starting up external hard drive
Hi, After upgrading to Leopard, everytime I turn on my external hard drive after my Powerbook G4 starts up, I get a kernal panic and it says that I need to shutdown. So I do and when it restarts the disk is mounted fine with no problems. Why would it
-
VLC Plugin 2.1.3 crashes constantly
I have 4 streams on all the time in Mozilla Firefox. I'm using VLC to get stream from a couple of Raspberry Pis and it works fine for a while. Then VLC plugin stopsworking, I stop the plugin and refresh the website and boom, it works again for a whil
-
Order By on toplink queries.. how to?
Greetings I use jdev 10.1.3 to create my apps. I also use toplink. I have the default findAll methods that I use to read an entire table into a list. I can then write a comparator and sort the list. My question is there a way to do effectively an ord
-
I am having trouble connecting to my creative cloud desktop to install my latest versions of CC design apps (Which reads Error code:1). I am also having issues with my Mac installer as well, and I am wondering if this might have anything to do with t