ORA-01507: database not mounted when attempting to run emca

All,
I'm working on a renamed host attempting to drop and create the repository so that I can get the Oracle Enterprise Manager running on this host. In doing so, I was able to successfully drop the repository with the following command:
./emca -deconfig dbcontrol db -repos dropMy issue surfaces when i now try to create the repository as follows:
./emca -config dbcontrol db -repos create.
Dec 3, 2012 5:55:11 PM oracle.sysman.emcp.EMConfig perform
SEVERE: No value was set for the parameter DBID.
The above output was on my screen. When I check the emca logfile, I found the following:
Dec 3, 2012 5:54:44 PM oracle.sysman.emcp.DatabaseChecks checkDataGuardEnabled
CONFIG: ORA-01507: database not mounted
Dec 3, 2012 5:55:11 PM oracle.sysman.emcp.DatabaseChecks getDbid
CONFIG: ORA-01507: database not mounted
Does anyone have any input as to what could be the problem?
Thanks in advance!

The server and database have been restarted since the hostname change. I don't know it this will help shed any light, but I have also attempted to use dbca in an attempt to work around the emca issue, but it also gives me errors. Sometimes I get the error stating it cannot run in EXCLUSIVE mode. Other times I get a database not found error.
Could the problem be that I need to shutdown the database and start it in a particular mode prior to running emca?
Thanks

Similar Messages

When to restore controlfile, rman is complaining database not mounted?

to restore controlfile, shouldn`t the database be in NOMOUNT status?
if yes, then why rman is complaining ORA-01507?
where I went wrong? Please advise.
C:\Documents and Settings\PhoenixBai>rman target / nocatalog
Recovery Manager: Release 10.2.0.1.0 - Production on Tue Dec 14 10:35:51 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database (not started)
RMAN> startup nomount;
Oracle instance started
Total System Global Area     612368384 bytes
Fixed Size                     1250428 bytes
Variable Size                234883972 bytes
Database Buffers             369098752 bytes
Redo Buffers                   7135232 bytes
RMAN> restore controlfile until time 'sysdate-1.5/24';
Starting restore at 14-DEC-10
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=157 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/14/2010 10:36:12
ORA-01507: database not mounted
RMAN>

it doesn`t. I tried long before this one.
the dilemma i am facing is that I need to recover to the time which was included in incarnation 2.
And to be able to reset database to incarnation 2, i need to startup MOUNT the database.
And once you startup mount the database RESTORE CONTROLFILE won`t work any more.
below is the standard procedure, documented on 10gR2 doc, but still, i am getting errors:
Why it is throwing errors? HOw can I fix?
RMAN> alter database mount;
database mounted
RMAN> list incarnation of database orcl;
List of Database Incarnations
DB Key Inc Key DB Name DB ID            STATUS Reset SCN Reset Time
1       1       ORCL     1264908153       PARENT 1          30-AUG-05
2       2       ORCL     1264908153       PARENT 534907     07-DEC-10
3       3       ORCL     1264908153       CURRENT 56335397   14-DEC-10
RMAN> reset database to incarnation 2;
database reset to incarnation 2
RMAN> restore database until scn 56335390;
Starting restore at 14-DEC-10
using channel ORA_DISK_1
creating datafile fno=6 name=E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\ETLTBS01.ORA
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF
restoring datafile 00002 to E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\UNDOTBS01.DBF
restoring datafile 00003 to E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF
restoring datafile 00004 to E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF
restoring datafile 00005 to E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\EXAMPLE01.DBF
channel ORA_DISK_1: reading from backup piece E:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2
MF_NNND1_TAG20101213T132300_6JCCFO2X_.BKP
channel ORA_DISK_1: restored backup piece 1
piece handle=E:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2010_12_13\O1_MF_NNND1_TAG20101213
O2X_.BKP tag=TAG20101213T132300
channel ORA_DISK_1: restore complete, elapsed time: 00:00:55
Finished restore at 14-DEC-10
RMAN> recover database until scn 56335390;
Starting recover at 14-DEC-10
using channel ORA_DISK_1
starting media recovery
media recovery failed
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 12/14/2010 11:36:14
ORA-00283: recovery session canceled due to errors
RMAN-11003: failure during parse/execution of SQL statement: alter database recover if needed
start until change 56335390
ORA-00283: recovery session canceled due to errors
ORA-38727: FLASHBACK DATABASE requires a current control file.Edited by: PhoenixBai on Dec 14, 2010 11:37 AM

Database not mounted

Dear All,
Related Database is just installed, I got error message as below:
SQL> shutdown
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 217157632 bytes
Fixed Size 2211928 bytes
Variable Size 159387560 bytes
Database Buffers 50331648 bytes
Redo Buffers 5226496 bytes
ORA-00205: error in identifying control file, check alert log for more info
SQL>
Please kindly give advice for this.
Thanks and regards,
Vandy

Dear Niket,
Thank you very much for your reply and help.
Now I have checked follow your advice and get the result as below:
Note: My Oracle Database (11g Realeae 2) is installed on Oracle Linux 5.8
[oracle@ovmmger ~]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Mon Jan 14 03:14:40 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL>
SQL> startup
ORACLE instance started.
Total System Global Area 217157632 bytes
Fixed Size 2211928 bytes
Variable Size 159387560 bytes
Database Buffers 50331648 bytes
Redo Buffers 5226496 bytes
ORA-00205: error in identifying control file, check alert log for more info
SQL> show parameter control_files
NAME TYPE VALUE
control_files string /u01/app/oracle/product/11.2.0
/db_1/dbs/cntrlDB11G.dbf
SQL> shutdown
ORA-01507: database not mounted
ORACLE instance shut down.
SQL>
Please kindly give advice for this.
Thanks and regards,
Vandy
Edited by: Vandy_Kh on Jan 13, 2013 5:56 PM

Ora-01219 database not open; only queries on fixed tables and views.

Hi everyone
There is another post stating this error, but since the source is different, I think is okay to make a different post as well.
Our database was working fine until the other day, when suddenly power went off, UPS was damaged and didn't hold, and when we restarted the database this is what happens:
Using Enterprise Manager Console, we can make a succesful connection in the same machine, but if we choose Schema, the following error appears:
ora-01219 database not open; only queries on fixed tables and views.
When accesing from a different machine:
ORA-01033: ORACLE initialization or shutdown in progress
Thanks in advance

Here is the last entries of alert log
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 20-JUL-2010 15:48:31
Tracing not turned on.
Tns error struct:
ns main err code: 12638
TNS-12638: Fallo de recuperación de credenciales
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Tue Jul 20 15:50:50 2010
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 11.1.0.7.0.
Using parameter settings in server-side spfile E:\ORACLE\CRIMINALISTICA\PRODUCT\11.1.0\DB_1\DATABASE\SPFILECRIM.ORA
System parameters with non-default values:
processes = 150
memory_target = 816M
control_files = "E:\ORACLE\ORADATA\CRIM\CONTROL01.CTL"
control_files = "E:\ORACLE\ORADATA\CRIM\CONTROL02.CTL"
control_files = "E:\ORACLE\ORADATA\CRIM\CONTROL03.CTL"
db_block_size = 8192
compatible = "11.1.0.0.0"
db_recovery_file_dest = "E:\Oracle\flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=CRIMXDB)"
audit_file_dest = "E:\ORACLE\ADMIN\CRIM\ADUMP"
audit_trail = "DB"
db_name = "CRIM"
open_cursors = 300
diagnostic_dest = "E:\ORACLE"
Tue Jul 20 15:50:55 2010
PMON started with pid=2, OS id=1688
Tue Jul 20 15:50:55 2010
VKTM started with pid=3, OS id=2236 at elevated priority
Tue Jul 20 15:50:55 2010
DIAG started with pid=4, OS id=2332
Tue Jul 20 15:50:55 2010
DBRM started with pid=5, OS id=2328
Tue Jul 20 15:50:55 2010
PSP0 started with pid=6, OS id=2432
VKTM running at (20)ms precision
Tue Jul 20 15:50:55 2010
DIA0 started with pid=7, OS id=2160
Tue Jul 20 15:50:55 2010
MMAN started with pid=8, OS id=2156
Tue Jul 20 15:50:55 2010
DBW0 started with pid=9, OS id=2064
Tue Jul 20 15:50:55 2010
LGWR started with pid=10, OS id=3176
Tue Jul 20 15:50:55 2010
CKPT started with pid=11, OS id=3180
Tue Jul 20 15:50:55 2010
SMON started with pid=12, OS id=3184
Tue Jul 20 15:50:55 2010
RECO started with pid=13, OS id=3188
Tue Jul 20 15:50:55 2010
MMON started with pid=14, OS id=3192
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
ORACLE_BASE from environment = E:\Oracle
Tue Jul 20 15:50:55 2010
MMNL started with pid=15, OS id=3196
Tue Jul 20 15:50:56 2010
alter database mount exclusive
Setting recovery target incarnation to 2
Successful mount of redo thread 1, with mount id 1304879008
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: alter database mount exclusive
alter database open
Errors in file e:\oracle\diag\rdbms\crim\crim\trace\crim_dbw0_2064.trc:
ORA-01157: cannot identify/lock data file 9 - see DBWR trace file
ORA-01110: data file 9: 'E:\ORACLE\ORADATA\STOPCRIM5\STOPCRIM5TABLESPACE.ORA'
ORA-27047: unable to read the header block of file
OSD-04006: fallo de ReadFile(); no se ha podido leer del archivo
O/S-Error: (OS 38) Se ha alcanzado el final del archivo.
Errors in file e:\oracle\diag\rdbms\crim\crim\trace\crim_dbw0_2064.trc:
ORA-01157: cannot identify/lock data file 16 - see DBWR trace file
ORA-01110: data file 16: 'E:\ORACLE\ORADATA\PRUEBACARLOS\PRUEBACARLOSTABLESPACE.ORA'
ORA-27047: unable to read the header block of file
OSD-04006: fallo de ReadFile(); no se ha podido leer del archivo
O/S-Error: (OS 38) Se ha alcanzado el final del archivo.
Errors in file e:\oracle\diag\rdbms\crim\crim\trace\crim_dbw0_2064.trc:
ORA-01157: cannot identify/lock data file 17 - see DBWR trace file
ORA-01110: data file 17: 'E:\ORACLE\ORADATA\PRUEBACARLOS\PRUEBACARLOSINDEX.ORA'
ORA-27047: unable to read the header block of file
OSD-04006: fallo de ReadFile(); no se ha podido leer del archivo
O/S-Error: (OS 38) Se ha alcanzado el final del archivo.
ORA-1157 signalled during: alter database open...
Tue Jul 20 16:04:39 2010
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.

ORA-01109:database not open

ORA-01109:database not open, how to solve this problem please give me steps.

Connect to the instance as sysdba:sqlplus /nolog
conn / as sysdbaGet the instance status:SELECT STATUS FROM V$INSTANCE;Depending on reported status:
. MOUNT:ALTER DATABASE OPEN;. STARTED:ALTER DATABASE MOUNT;
ALTER DATABASE OPEN;Report any problem encounterred there.
Regards,
Yoann.

Database Datafiles Recovery. ORA-01219: database not open:

Hi,
I have a 10g database running on SuSE Linux server. I mistakenly deleted one of my file system's files that contain some of the database datafiles. I can connect to the database but I am failing to run queries:
SQL> select * from global_name;
select * from global_name
ERROR at line 1:
ORA-01219: database not open: queries allowed on fixed tables/views only
I do weekly cold backups of the server. My database is in NOARCHIVE log mode. What is the best way to recover my data; Is it possible that I restore only the file system or I should should do a complete restore of all file systems??
Regards
Kevin
Edited by: Kevin Honde on Jul 28, 2010 2:55 PM

I mistakenly deleted one of my file system's files that contain some of the database datafiles.Ok
I do weekly cold backups of the server.Great !!
My database is in NOARCHIVE log mode. That's the mistake in my opinion
What is the best way to recover my data; Restore it from the latest available cold backup.
There will be a data loss post weekly consistent cold backup. Which you have to accept because you do not have your database running in Archive Log mode.

Photosmart C6180 on wireless network does not respond when attempting to print

Photosmart C6180 successfully installed on wireless network does not respond when attempting to print. All in one is successfully installed on wireless network and SW successfully installed on Windows XP computer yet printer does not print. Get no error message other than document failed to print. HELP!

So gald I'm not the only one. I have been fighting this crappy HP printer for MONTHS also. Everything says a OK goody goody but printer fails to print every two to three weeks.

Exchange Data Center Switching Database Not Mounting

-Primary DC > 02 Exchange Servers ( All roles Installed) MAPI & Replication Network Between two
-DR Site > 01 Server (All roles) + 01 Server ( Mailbox Roles) Only MAPI network
-All the Servers in both Sites are members of DAG called DAG1
- All Mailbox Server have Database Copies in healthy states
I shutdown the Primary Database Completely and I saw that Mailbox Databases not mounting On DR Site.
What need to be configured? to Switch over and Automatic mount in case Primary Data Center Down.
here is the Screen Shot:
After Some time

Hi,
All DAG members should have the same number of networks, MAPI and Replication networks. Base on your description, members in DR site only have MAPI network.
If your primary datacenter fails, you need to switchover to secondary datacenter manually.
You can look at the following article.
http://technet.microsoft.com/en-us/library/dd351049(v=exchg.141).aspx
Best regards,
Belinda Ma
TechNet Community Support

Virtual keyboard does not open when attempting to type in username or password fields

virtual keyboard does not open when attempting to type in username or password fields. This occurs on multiple websites. HTC Incredible on Verizon network. Current updates on phone. Fennec update dated 9-20-2010. This used to work a couple weeks ago.

Thanks for the report. We're working on fixing this; you can see the current status here: https://bugzilla.mozilla.org/show_bug.cgi?id=591047
This bug should be fixed within the next week or so, and will be fixed in the upcoming beta release.

TS1702 I HAVE IPOD TOUCH MODEL A1421 AND IT WILL NOT RESTORE AND IS STUCK IN RESTORE MODE. DOES NOT RESTORE WHEN ATTEMPTING THROUGH ITUNES. PLEASE HELP!

I HAVE IPOD TOUCH MODEL A1421 AND IT WILL NOT RESTORE AND IS STUCK IN RESTORE MODE. DOES NOT RESTORE WHEN ATTEMPTING THROUGH ITUNES. PLEASE HELP!

If iTunes sees the iPod, try a manual install, as pointed out on link below.
Troubleshooting 101
Some topics covered
-Basic troubleshooting steps
-Hard reset instructions
-Manual restore instructions
-Hardware troubleshooting
-Preventive Maintenance
-Anti-theft & recovery tips
-Battery-saving tips
-Repair options
-Contacting Apple
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

HT201406 1st. Gen iPad question: the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc..

1st. Gen iPad question: the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present. Tapping screen just brings up the option to: "Select Select All Paste." I have rebbooted with no change.
Message was edited by: Jimfromutah
The problem was my connected bluetooth keyboard.

1st. Gen iPad question: the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present. Tapping screen just brings up the option to: "Select Select All Paste." I have rebbooted with no change.
Message was edited by: Jimfromutah
The problem was my connected bluetooth keyboard.

Error 102 when attempting to run software update

I am getting an Error 102 'error occurred while downloading the updates' message when attempting to run software update.
I've already cleared the cache, rebooted the machine, etc. with no luck.
I'm apparently stuck on V10.8 and cannot update software beyond that point.
Any other ideas?
Thanks!

Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/PackageKit
Referenced from: /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update
Reason: image not found
This indicates a mucked up installation, since the SU can't find the PackageKit file. Reinstall Snow Leopard from your install disc.

Dr Watson error when attempting to run an exe (LV 6.1) on NT OS

When attempting to run the LV 6.1 EXE I created on an NT system using the Application Builder I get a Windows Dr Watson ERROR and I cant go any further. The code works fine when running from LV. So far I have tried:
1) Created a Distribution Kit (so the RTE would be installed) ...same error.
2) I tried this same EXE on XP and it runs just fine.
P.S.
There is already an EXE running on this system (a previous version of the code) which was created using LV 5.1. Since I do not have the bld file I used the standard configuration (no dynamic VIs, just added the top level).
I really need to upgrade this system....thanks in advance for your help.

Hi Lupita,
Thank you for contacting National Instruments. It looks like you are currently running a 5.1 executable and then attempting to run a LabVIEW 6.1 executable. Are these operations intended to be simultaneous? Are both executables being run simultaneous when you are testing this on the XP system? Is it possible to halt the 5.1 application and test the 6.1 executable under these circumstances? Also, I would recommend downloading the Run-Time engine for 6.1 here, and verify that this behavior still occurs. There may be some shared resources that cannot be accessed, but I am currently unaware of how that would initiate a Drwtsn32.exe error.
Jason W.
National Instruments
Applications Engineer

Error message when attempting to run aam

I am encountering error message when attempting to run aam - Please connect to the internet, then try again when I am already connected

Please see Sign in or activation errors | CS6, CS5.5 Subscriptions, CS6 Perpetual - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for common resolutions to these difficulties.

Screensaver not starting when iTunes is running. Works otherwise...

Hi everyone,
My screensaver will not start when iTunes is running (also Spotify). When the app is closed, the screensaver starts when it's supposed to (5 min. in my case, but have tried other time limits). I've tried changing mouse settings and even shutting it off to see if that's the cause but it didn't help. I use the MacMini as a home theater computer hooked up to my plasma so I need the screensaver to work. In the meantime, I've been using hot corners to force screensaver, but I would love for it to start automatically when music is playing. I've tried rebooting, resetting, but to no avail.
Has anyone else had this issue or know what the problem is?
I'm running MacMini brand new. Mavericks 10.9.1. Latest iTunes.
Thanks.

I don't normally use the screensaver. However when I tested it, I get the same results while iTunes is running.
I encourage you to report it using > Apple - Mac OS X - Feedback

ORA-01507: database not mounted when attempting to run emca

Similar Messages

Maybe you are looking for