Database not mounted
Dear All,
Related Database is just installed, I got error message as below:
SQL> shutdown
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 217157632 bytes
Fixed Size 2211928 bytes
Variable Size 159387560 bytes
Database Buffers 50331648 bytes
Redo Buffers 5226496 bytes
ORA-00205: error in identifying control file, check alert log for more info
SQL>
Please kindly give advice for this.
Thanks and regards,
Vandy
Dear Niket,
Thank you very much for your reply and help.
Now I have checked follow your advice and get the result as below:
Note: My Oracle Database (11g Realeae 2) is installed on Oracle Linux 5.8
[oracle@ovmmger ~]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Mon Jan 14 03:14:40 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL>
SQL> startup
ORACLE instance started.
Total System Global Area 217157632 bytes
Fixed Size 2211928 bytes
Variable Size 159387560 bytes
Database Buffers 50331648 bytes
Redo Buffers 5226496 bytes
ORA-00205: error in identifying control file, check alert log for more info
SQL> show parameter control_files
NAME TYPE VALUE
control_files string /u01/app/oracle/product/11.2.0
/db_1/dbs/cntrlDB11G.dbf
SQL> shutdown
ORA-01507: database not mounted
ORACLE instance shut down.
SQL>
Please kindly give advice for this.
Thanks and regards,
Vandy
Edited by: Vandy_Kh on Jan 13, 2013 5:56 PM
Similar Messages
-
When to restore controlfile, rman is complaining database not mounted?
to restore controlfile, shouldn`t the database be in NOMOUNT status?
if yes, then why rman is complaining ORA-01507?
where I went wrong? Please advise.
C:\Documents and Settings\PhoenixBai>rman target / nocatalog
Recovery Manager: Release 10.2.0.1.0 - Production on Tue Dec 14 10:35:51 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database (not started)
RMAN> startup nomount;
Oracle instance started
Total System Global Area 612368384 bytes
Fixed Size 1250428 bytes
Variable Size 234883972 bytes
Database Buffers 369098752 bytes
Redo Buffers 7135232 bytes
RMAN> restore controlfile until time 'sysdate-1.5/24';
Starting restore at 14-DEC-10
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=157 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/14/2010 10:36:12
ORA-01507: database not mounted
RMAN>it doesn`t. I tried long before this one.
the dilemma i am facing is that I need to recover to the time which was included in incarnation 2.
And to be able to reset database to incarnation 2, i need to startup MOUNT the database.
And once you startup mount the database RESTORE CONTROLFILE won`t work any more.
below is the standard procedure, documented on 10gR2 doc, but still, i am getting errors:
Why it is throwing errors? HOw can I fix?
RMAN> alter database mount;
database mounted
RMAN> list incarnation of database orcl;
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 ORCL 1264908153 PARENT 1 30-AUG-05
2 2 ORCL 1264908153 PARENT 534907 07-DEC-10
3 3 ORCL 1264908153 CURRENT 56335397 14-DEC-10
RMAN> reset database to incarnation 2;
database reset to incarnation 2
RMAN> restore database until scn 56335390;
Starting restore at 14-DEC-10
using channel ORA_DISK_1
creating datafile fno=6 name=E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\ETLTBS01.ORA
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF
restoring datafile 00002 to E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\UNDOTBS01.DBF
restoring datafile 00003 to E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF
restoring datafile 00004 to E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF
restoring datafile 00005 to E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\EXAMPLE01.DBF
channel ORA_DISK_1: reading from backup piece E:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2
MF_NNND1_TAG20101213T132300_6JCCFO2X_.BKP
channel ORA_DISK_1: restored backup piece 1
piece handle=E:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2010_12_13\O1_MF_NNND1_TAG20101213
O2X_.BKP tag=TAG20101213T132300
channel ORA_DISK_1: restore complete, elapsed time: 00:00:55
Finished restore at 14-DEC-10
RMAN> recover database until scn 56335390;
Starting recover at 14-DEC-10
using channel ORA_DISK_1
starting media recovery
media recovery failed
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 12/14/2010 11:36:14
ORA-00283: recovery session canceled due to errors
RMAN-11003: failure during parse/execution of SQL statement: alter database recover if needed
start until change 56335390
ORA-00283: recovery session canceled due to errors
ORA-38727: FLASHBACK DATABASE requires a current control file.Edited by: PhoenixBai on Dec 14, 2010 11:37 AM -
Exchange Data Center Switching Database Not Mounting
-Primary DC > 02 Exchange Servers ( All roles Installed) MAPI & Replication Network Between two
-DR Site > 01 Server (All roles) + 01 Server ( Mailbox Roles) Only MAPI network
-All the Servers in both Sites are members of DAG called DAG1
- All Mailbox Server have Database Copies in healthy states
I shutdown the Primary Database Completely and I saw that Mailbox Databases not mounting On DR Site.
What need to be configured? to Switch over and Automatic mount in case Primary Data Center Down.
here is the Screen Shot:
After Some timeHi,
All DAG members should have the same number of networks, MAPI and Replication networks. Base on your description, members in DR site only have MAPI network.
If your primary datacenter fails, you need to switchover to secondary datacenter manually.
You can look at the following article.
http://technet.microsoft.com/en-us/library/dd351049(v=exchg.141).aspx
Best regards,
Belinda Ma
TechNet Community Support -
ORA-01507: database not mounted when attempting to run emca
All,
I'm working on a renamed host attempting to drop and create the repository so that I can get the Oracle Enterprise Manager running on this host. In doing so, I was able to successfully drop the repository with the following command:
./emca -deconfig dbcontrol db -repos dropMy issue surfaces when i now try to create the repository as follows:
./emca -config dbcontrol db -repos create.
Dec 3, 2012 5:55:11 PM oracle.sysman.emcp.EMConfig perform
SEVERE: No value was set for the parameter DBID.
The above output was on my screen. When I check the emca logfile, I found the following:
Dec 3, 2012 5:54:44 PM oracle.sysman.emcp.DatabaseChecks checkDataGuardEnabled
CONFIG: ORA-01507: database not mounted
Dec 3, 2012 5:55:11 PM oracle.sysman.emcp.DatabaseChecks getDbid
CONFIG: ORA-01507: database not mounted
Does anyone have any input as to what could be the problem?
Thanks in advance!The server and database have been restarted since the hostname change. I don't know it this will help shed any light, but I have also attempted to use dbca in an attempt to work around the emca issue, but it also gives me errors. Sometimes I get the error stating it cannot run in EXCLUSIVE mode. Other times I get a database not found error.
Could the problem be that I need to shutdown the database and start it in a particular mode prior to running emca?
Thanks -
Connected to auxiliary database (not started)
Hello! I'm establishing Data Guard on Oracle 11g (x64). OS - CentOS 6.6 x86_x64.
The problem occurs when i'm trying to connect from my primary db to standby.
I expect:
connected to auxiliary database (not mounted)
but getting
not started
And when i'm trying to:
duplicate target database for standby nofilenamecheck dorecover;
I get an expected error:
Starting Duplicate Db at 17-MAR-15
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/17/2015 01:04:49
RMAN-06403: could not obtain a fully authorized session
RMAN-04006: error from auxiliary database: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
I also read simular topic:
Creating a duplicated database from active database
but i check several times my listener.ora on standby, and i can't figure out where the problem lies.
Actions that preceded the appearance of the error:
The main base is loaded by default (startup)
StandBy base loaded without mount (startup nomount)
On the main launch from the terminal «rman target /»
Command «connect auxiliary sys@orclstandby»
Password (sys)
Got: connected to auxiliary database (not started)
Here is my configuration files:
Primary:
tnsname:
orclprimary =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oracle11centos.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.com)
orclstandby =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.115)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orclstandby.com)
(SID_NAME = orcl)
pfileORCL.ora
orcl.__db_cache_size=301989888
orcl.__java_pool_size=4194304
orcl.__large_pool_size=4194304
orcl.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=314572800
orcl.__sga_target=469762048
orcl.__shared_io_pool_size=0
orcl.__shared_pool_size=150994944
orcl.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/orcl/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u01/app/oracle/oradata/orcl/control01.ctl','/u01/app/oracle/flash_recovery_area/orcl/control02.ctl'
*.db_block_size=8192
*.db_domain='com'
*.db_name='orcl'
*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
*.db_recovery_file_dest_size=4070572032
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=orclXDB)'
*.memory_target=784334848
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.undo_tablespace='UNDOTBS1'
db_unique_name='orclprimary'
log_archive_config='dg_config=(orclprimary,orclstandby)'
log_archive_dest_1='SERVICE=orclstandby LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=orclstandby'
log_archive_dest_2='LOCATION=/u01/app/oracle/oradata/orcl/archive VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orclprimary'
log_archive_dest_state_1=ENABLE
log_archive_dest_state_2=ENABLE
fal_client='orclprimary'
fal_server='orclstandby'
standby_file_management='AUTO'
StandBy
tnsname
orclstandby =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oracle11standby2centos.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orclstandby.com)
orclprimary =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.101)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.com)
listener
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = orclstandby.com)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1/)
(SID_NAME = orcl)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = oracle11standby2centos.com)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
pfileORCL.ora
orcl.__db_cache_size=301989888
orcl.__java_pool_size=4194304
orcl.__large_pool_size=4194304
orcl.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=314572800
orcl.__sga_target=469762048
orcl.__shared_io_pool_size=0
orcl.__shared_pool_size=150994944
orcl.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/orcl/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u01/app/oracle/oradata/orcl/control01.ctl','/u01/app/oracle/flash_recovery_area/orcl/control02.ctl'
*.db_block_size=8192
*.db_domain='com'
*.db_name='orcl'
*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
*.db_recovery_file_dest_size=4070572032
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=orclXDB)'
*.memory_target=784334848
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.undo_tablespace='UNDOTBS1'
db_unique_name='orclstandby'
log_archive_config='dg_config=(orclprimary,orclstandby)'
log_archive_dest_1='SERVICE=orclstandby LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=orclprimary'
log_archive_dest_2='LOCATION=/u01/app/oracle/oradata/orcl/archive VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orclstandby'
log_archive_dest_state_1=ENABLE
log_archive_dest_state_2=ENABLE
fal_client='orclstandby'
fal_server='orclprimary'
standby_file_management='AUTO'
Where I did wrong?Thanks for the quick reply!
Primary:
sqlplus sys/<password>@orclstandby as sysdba
Result:
SQL*Plus: Release 11.2.0.1.0 Production on Tue Mar 17 09:01:29 2015
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL>
sqlplus sys/<password>@orclprimary as sysdba
Result:
SQL*Plus: Release 11.2.0.1.0 Production on Tue Mar 17 09:28:21 2015
Copyright (c) 1982, 2009, Oracle. All rights reserved.
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Standby
sqlplus sys/<password>@orclstandby as sysdba
Result:
SQL*Plus: Release 11.2.0.1.0 Production on Tue Mar 17 09:08:37 2015
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL>
sqlplus sys/<password>@orclprimary as sysdba
Result:
SQL*Plus: Release 11.2.0.1.0 Production on Tue Mar 17 09:10:22 2015
Copyright (c) 1982, 2009, Oracle. All rights reserved.
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor -
Hello All,
Database can not mount. In this Database domain Administrator mailbox have.
Please suggest. It's very important
The error:
[PS] C:\Windows\system32>Mount-Database -Identity MBX-01 -Force
Confirm
At least one committed transaction log file is missing. Mounting this database will result in data loss. If you can
locate the missing log files, don't continue. Are you sure you want to continue?
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"): a
Failed to mount database "MBX-01". Error: An Active Manager operation failed. Error: The database action failed.
Error: Operation failed with message: MapiExceptionJetErrorRequiredLogFilesMissing: Unable to mount database.
(hr=0x80004005, ec=-543)
Diagnostic context:
Lid: 65256
Lid: 10722 StoreEc: 0xFFFFFDE1
Lid: 1494 ---- Remote Context Beg ----
Lid: 45120 dwParam: 0x51FF5F0
Lid: 57728 dwParam: 0x51FF68C
Lid: 46144 dwParam: 0x51FF709
Lid: 34880 dwParam: 0x51FF709
Lid: 34760 StoreEc: 0xFFFFFDE1
Lid: 41344 Guid: 1c2c8cab-ae3f-40c8-8024-ffc776b22360
Lid: 35200 dwParam: 0x2EFC
Lid: 46144 dwParam: 0x51FFA55
Lid: 34880 dwParam: 0x51FFA55
Lid: 56264 StoreEc: 0x1388
Lid: 46280 StoreEc: 0xFFFFFDE1
Lid: 1750 ---- Remote Context End ----
Lid: 1047 StoreEc: 0xFFFFFDE1 [Database: MBX-01, Server: EG-EXCHG-01.ABC.com]
+ CategoryInfo : InvalidOperation: (MBX-01:ADObjectId) [Mount-Database], InvalidOperationException
+ FullyQualifiedErrorId : [Server=EG-EXCHG-01,RequestId=ca57e784-43c7-4357-9ab6-08881c87bb77,TimeStamp=9/18/2014 5
:31:08 AM] [FailureCategory=Cmdlet-InvalidOperationException] 51350054,Microsoft.Exchange.Management.SystemConfigu
rationTasks.MountDatabase
+ PSComputerName : eg-exchg-01.ABC.comHi,
This issue indicate corrupted database or corrupted logs. I suggest you to check and repair the database or check and repair the database log.
1. Check the state of database by following command: eseutil /mh "Path of the database"
Ps: Default path of the database is “C:\Program Files\Microsoft\Exchange Server\V15\Mailbox\Mailbox Database\Mailbox Database.edb”
Default path of the log files is “C:\Program Files\Microsoft\Exchange Server\V15\Mailbox\Mailbox Database\E00”
2. If the state is in clean shutdown, move all the log files from the Transaction logs folder location and then mount the database.
3. If the state is in dirty shutdown, check if the log files that is indicated as Logs required is available or not.
4. You can run Eseutil ml “Path of the log file\e00” to make sure that the log files is required is in a Clean state. This command will help you check the health of all the log files in the location.
5. If the log files are healthy, then try Soft recovery with the command Eseutil /r e00 /l ”Path of log files” /p “Path of the database”
Note:
Make sure you make a backup of the database before attempting any kind of repairs
6. Once the command completes successfully, then mount the database.
7. In case the required log files are not available in a clean state or missing, either restore from a successful back up or perform Hard repair with defragment.
Refer to this file about hard repair:
http://gallery.technet.microsoft.com/Step-by-Step-Exchange-2013-f8bed401
Hope this will be helpful for you -
Exchange Server 2010 SP3 Databases are not mounting after the recovery process
Hi,
We are using Exchange server 2010 SP3 in our office. Databases are stored in an ISCSI drive mapped with the exchange. We are taking daily full backup of my Exchange server using Symantec Backup exe 2012. As a testing purpose I created a test environment
same like my existing live environment to check the disaster recovery and backup. Thankfully disaster recovery worked well and I am able to open the exchange management console and powershell. But I am not able to mount the recovered databases ending
with an error saying "Couldn't mount the database that you specified. Specified database: officialrecover; Error code:
An Active Manager operation failed.........." and even I am not able to use the utility eseutil.exe to the database with an error "access to source database failed with jet error 1811". I am able to create a new database and mount
it.
I am using Windows Server Ent 2008 R2 64 Bit with Exchange Server 2010 SP3 in the Live environment with 3 partitions called C (279 GB), E (4.46 TB, ISCSI), F (976 GB) in my Live environment.
For test it is Windows Server Ent 2008 R2 64 Bit with Exchange Server 2010 SP3 with 3 partitions C (240 GB), E (1.4 TB), & F (240 GB).
Please help me with your valid comments to solve and mount the database and close the issue for ever.
With Regards
JayJared is correct that in essence the message is saying the DB cannot be found.
When you restored to your recovery server are all the paths the same, i.e. if the DB existed on E:\XYZ on the production server it must be the same on the recovery server
When you restored into the recovery site do you have AD restored into that site as well?
For the recovery server are you using iSCSI storage for it as well? If so am I correct to assume that you have copies of the databases just for use on this server and are not trying to reference the same instance of the DB from the production
and test/recovery server?
I have also seen an issue where DB's getting written to disk from Symantec mess up the header of the DB. If you want to validate that the DB is actually intact and accessible you might want to check out our DigiScope product
http://www.lucid8.com/product/digiscope.asp using a free DEMO license. If it works i.e. you are able to mount in DigiScope from same location where its failing on the recovery server we know the
DB your pointing at is good and accessible from the current path but something else is amiss in your configuration
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
2007 --> 2010 --> 2013 with Lucid8's
DigiScope -
Destination database instance is 'started' not 'mounted' in standby alert.l
11.2.0.2 Physcial standby db is taking long time to startup approximately about 20 to 30 minutes. In Alert.log i am seeing continous message "destination database instance is 'started' not 'mounted'" at time of startup. Its solaris 64bit platform. Any idea whats wrong?
user530956 wrote:
11.2.0.2 Physcial standby db is taking long time to startup approximately about 20 to 30 minutes. In Alert.log i am seeing continous message "destination database instance is 'started' not 'mounted'" at time of startup. Its solaris 64bit platform. Any idea whats wrong?what parameters you been set for LOG_ARCHIVE_DEST_2 in standby instance? Disable those parameters.
Next time paste your PFILE of standby.
>
user530956
Newbie
Handle: user530956
Status Level: Newbie
Registered: Sep 15, 2006
Total Posts: 113
Total Questions: 63 (63 unresolved)
>
WOW.... Not even one question was not resolved, Sad to see that no one is helpful in OTN, then work with Support.
CLOSE THE THREADS AS ANSWERED Keep the forum clean.
Read Announcement: Forums Etiquette / Reward Points
https://forums.oracle.com/forums/ann.jspa?annID=718 -
Oracle 9i database is not mounted on one instance
platform: IBM AIX
db version: oracle 9i two node rac
due to network problems one of the instance is down,after server restart the database is not mounting.just it is hanging.alert log has no information.
please helpNagendra T wrote:
platform: IBM AIX
db version: oracle 9i two node rac
due to network problems one of the instance is down,after server restart the database is not mounting.just it is hanging.alert log has no information.What is the status of the instance, You can check from other node(instance) also.
If try to startup instance, any errors from SQL?
No information in alert log file? Are you chcking in right alert logfile?
Check any background processes are running or not?
$ps -ef|grep pmon
However one instance running, So you can kill that session which is not running and start again. -
Oracle XE: Database does not mount automatically after Windows reboot
Hi,
after rebooting a Windows 2003 Server, the Oracle Services seem to start properly, but the database is not mounted.
However the database can be mounted manually via that SQL console.
How do I achieve that the database is mounted automatically?
Best regards, ErhardHi,
sorry I forgot to mention that I am new to Oracle.
Here's the reg key, so you can see all parms yourself:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE]
@=""
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_XE]
"StmtCacheSize"="0"
"NLS_LANG"="GERMAN_GERMANY.WE8MSWIN1252"
"ORACLE_HOME_NAME"="XE"
"ORACLE_BASE"="C:\\oraclexe\\"
"VERSION"="10.2.0.1.0"
"ORACLE_HOME_KEY"="SOFTWARE\\ORACLE\\KEY_XE"
@=""
"ORAMTS_CP_TRACE_LEVEL"="0"
"Type"=dword:00000057
"ORACLE_SID"="XE"
"ORACLE_HOME"="C:\\oraclexe\\app\\oracle\\product\\10.2.0\\server"
"ORAMTS_CP_TRACE_DIR"="C:\\oraclexe\\app\\oracle\\product\\10.2.0\\server\\oramts\\trace"
"StatementCacheSize"="0"
"OLEDB"="C:\\oraclexe\\app\\oracle\\product\\10.2.0\\server\\oledb\\mesg"
"ORA_XE_AUTOSTART"=hex(2):54,00,52,00,55,00,45,00,00,00
"ORA_XE_SHUTDOWN"=hex(2):54,00,52,00,55,00,45,00,00,00
"ORA_XE_SHUTDOWNTYPE"=hex(2):69,00,6d,00,6d,00,65,00,64,00,69,00,61,00,74,00,\
65,00,00,00
"ORA_XE_SHUTDOWN_TIMEOUT"=hex(2):39,00,30,00,00,00
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_XE\ODP.NET]
@=""
"TraceFileName"="C:\\ODPNET.trc"
"TraceLevel"="0"
"TraceOption"="0"
"StatementCacheSize"="10"
"Version"="10.2.0.100"
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_XE\OLEDB]
@=""
"CacheType"="Memory"
"ChunkSize"="100"
"DistribTX"="1"
"FetchSize"="100"
"OSAuthent"="0"
"PLSQLRset"="0"
"PwdChgDlg"="1"
"SchRstLng"="10000"
"UserDefFn"="0"
"DisableRetClause"="1"
"VCharNull"="1"
"TraceCategory"="0"
"TraceFileName"="c:\\OraOLEDB.trc"
"TraceLevel"="0"
"TraceOption"="0"
"SPPrmDefVal"="0"
"StmtCacheSize"="10"
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\OracleMTSRecoveryService]
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\OracleMTSRecoveryService\Protid_0]
"Name"="HTTP"
"Host"="ep-srv-01"
"Port"="2030"
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\OracleMTSRecoveryService\Setup]
"NumberOfInstalls"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\OracleMTSRecoveryService\Setup\All Versions]
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\OracleMTSRecoveryService\Setup\All Versions\1]
"Version"="10.2.0.1.0"
"Home"="C:\\oraclexe\\app\\oracle\\product\\10.2.0\\server"
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\OracleMTSRecoveryService\Setup\Current Version]
"Version"="10.2.0.1.0"
"Home"="C:\\oraclexe\\app\\oracle\\product\\10.2.0\\server" -
Destination database instance is 'started' not 'mounted'
When i tried to startup the standby database, it is taking a long time. (Still it is not started)
The error in alert log is
destination database instance is 'started' not 'mounted'
Could some one help me ?
Thanks in advance..
regards,
JibuNo version information.
No hardware or operating system.
No indication of whether physical, logical, or snapshot.
No indication of what commands you issued.
No error message (your impression of the message is not the message)
No indication as to whether it used to work or is a new install
No help is possible at this time. -
Could not mount database (hr=0x80004005,ec=1108)
Hi
I know this question has been asked before but my issue is different..
Exchange 2013 SP1 on Server 2012 R2
Was in process of migration from Exchange 2010 SP3 to Exchange 2013 SP1
Mail DB on d:\
Log Files on E:\
Since Migration was going....... No backups... :(
my Logfiles HDD crashed and not the database is not mounting... getting error
(hr=0x80004005,ec=1108)
Following is the output of mount database
Mount-Database -Identity maildb2013ex01
Failed to mount database "maildb2013ex01". Error: An Active Manager operation failed. Error: The database action
failed. Error: Operation failed with message: MapiExceptionDatabaseError: Unable to mount database. (hr=0x80004005,ec=1108)
Diagnostic context:
Lid: 65256
Lid: 10722 StoreEc: 0x454
Lid: 1494 ---- Remote Context Beg ----
Lid: 45120 dwParam: 0x1D7050
Lid: 57728 dwParam: 0x1D710C
Lid: 53632 dwParam: 0x1D7244
Lid: 61824 dwParam: 0x1D7244
Lid: 46144 dwParam: 0x1D7244
Lid: 34880 dwParam: 0x1D7293
Lid: 34760 StoreEc: 0xFFFFFDDA
Lid: 41344 Guid: 90bc4584-670e-4231-beb8-372cc68a87fa
Lid: 35200 dwParam: 0x2388
Lid: 46144 dwParam: 0x1D75EE
Lid: 34880 dwParam: 0x1D75EE
Lid: 54472 StoreEc: 0x1388
Lid: 42184 StoreEc: 0x454
Lid: 1750 ---- Remote Context End ----
Lid: 1047 StoreEc: 0x454 [Database: MailDB2013EX01, Server: Exchange01.local.saisystems.com]
+ CategoryInfo : InvalidOperation: (MailDB2013EX01:ADObjectId) [Mount-Database], InvalidOperationExcep
tion
+ FullyQualifiedErrorId : [Server=EX01,RequestId=cf57b110-08c1-4808-b773-a7f7f50d7dbf,TimeStamp=7/6/2014 8:3
9:29 AM] [FailureCategory=Cmdlet-InvalidOperationException] AA4B49BB,Microsoft.Exchange.Management.SystemConfigura
tionTasks.MountDatabase
+ PSComputerName : ex01.local.domain.com
Following is output of essutil
eseutil /mh "D:\MailStore\MailDB\MailDB2013EX01.edb"
Extensible Storage Engine Utilities for Microsoft(R) Exchange Server
Version 15.00
Copyright (C) Microsoft Corporation. All Rights Reserved.
Initiating FILE DUMP mode...
Database: D:\MailStore\MailDB\MailDB2013EX01.edb
DATABASE HEADER:
Checksum Information:
Expected Checksum: 0xe52a9911
Actual Checksum: 0xe52a9911
Fields:
File Type: Database
Checksum: 0xe52a9911
Format ulMagic: 0x89abcdef
Engine ulMagic: 0x89abcdef
Format ulVersion: 0x620,20
Engine ulVersion: 0x620,20
Created ulVersion: 0x620,20
DB Signature: Create time:05/03/2014 14:34:31.599 Rand:3476067128 Computer:
cbDbPage: 32768
dbtime: 75195 (0x125bb)
State: Dirty Shutdown
Log Required: 370149-370261 (0x5a5e5-0x5a655)
Log Committed: 0-370262 (0x0-0x5a656)
Log Recovering: 370262 (0x5a656)
GenMax Creation: 07/05/2014 20:08:06.321
Shadowed: Yes
Last Objid: 446
Scrub Dbtime: 0 (0x0)
Scrub Date: 00/00/1900 00:00:00
Repair Count: 0
Repair Date: 00/00/1900 00:00:00.000
Old Repair Count: 0
Last Consistent: (0x3D,32,2D7) 05/04/2014 03:13:28.088
Last Attach: (0x3E,2,268) 05/04/2014 03:14:06.633
Last Detach: (0x0,0,0) 00/00/1900 00:00:00.000
Last ReAttach: (0x5A651,2,0) 07/05/2014 20:07:29.961
Dbid: 1
Log Signature: Create time:05/03/2014 14:34:31.505 Rand:657597575 Computer:
OS Version: (6.2.9200 SP 0 NLS ffffffff.ffffffff)
Previous Full Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00.000
Previous Incremental Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00.000
Previous Copy Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00.000
Previous Differential Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00.000
Current Full Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00.000
Current Shadow copy backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00.000
cpgUpgrade55Format: 0
cpgUpgradeFreePages: 0
cpgUpgradeSpaceMapPages: 0
ECC Fix Success Count: none
Old ECC Fix Success Count: none
ECC Fix Error Count: none
Old ECC Fix Error Count: none
Bad Checksum Error Count: none
Old bad Checksum Error Count: none
Last checksum finish Date: 00/00/1900 00:00:00.000
Current checksum start Date: 00/00/1900 00:00:00.000
Current checksum page: 0
Operation completed successfully in 1.16 seconds.
The DB Size id 300GB, right now copying it to separate location
Can someone enlighten me what next is to be done or how can I mount this DB without log files...
will it mount without Logfiles???
Thanks
Bikram
bikramHi,
According to your description, your problematic database is in dirty shutdown state and your soft repair ends with errors. In this case, I'd like to say, the dirty shutdown state may be caused by that the required log files are missing. Thus, I recommend
you try the hard recovery by using Eseutil /p or
Eseutil /d /r.http://support.microsoft.com/kb/259851/en-us
Thanks,
Angela Shi
TechNet Community Support -
Upgrade to Yosemite, iPhoto won't open and NTFS-3G could not mount error with new external HD
Help!
I just did a software update to get OS X Yosemite 10.10.2 on my MacBook Pro.
Now iPhoto won't open and I get this error:
"Your photo library is either in use by another application or has become unreadable....Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup."
So I do this and try to repair the database as suggested and I get another error:
"iPhoto will open as soon as the iPhoto library is available. Time Machine might be backing it up."
But it's not - no external hard drive is connected.
I'm terrified I can't get access to my photos (and I admit I haven't backed up with Time Machine for over a year - my mistake that I won't make again).
So I bought a brand new external hard drive (seagate for mac and pc, 2TB) so I could save only my photos to the hard drive (because I googled and read you can manually save your photos to disk by dragging and dropping the photo library onto the external hard drive).
But I can't even get the hard drive to work....I get this error
"NTFS-3G could not mount /dev/disk2s1
at /Volumes/Seagate Backup Plus Drive because the following problem occurred:
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
the MacFUSE file system is not available (71)"
I google the issue again and it says to uninstall NTFS-3G but I actually think I just deleted it a long ago without uninstalling it properly?? I don't know....
(a) how do i fix iphoto
(b) how do i get external hard drives to work with this OS (I've read lots of posts and don't really understand the advice)
(c) how do i get all my photos onto the hard drive safely so I can import them onto a PC
Any assistance would be magic for this little lady!(c) how do i get all my photos onto the hard drive safely so I can import them onto a PC
First see if you can reformat the EHD to MS-DOS FAT with Disk Utility. If you can
open iPhoto and select all of the Events in the Events mode. Use the File ➙ Export ➙ File Export menu option and export to the EHD with these settings:
Select the destination for the export to be the EHD or a folder on the EHD. This process will create a folder for each Event in your library with the same name as the Event and contain the original image files. The EHD will be useable by a PC and the photos will be available also. -
Database is mounted automaticaly, but doesn't open
Hello everybody! Please help!!!
I have Oracle 8.1 installed on Win2000. When I restart the PC, the database is mounted automaticaly, but doesn't open. I have to open it manually every time I restart the PC. How can I solve this problem?Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
*What's the plist file?*
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
If that doesn't help:
Post the Crash Log.
It's at Home / Library / Logs / Crash-Reporter / iphoto.crash.log
Double click on the file and it will open in the Console. Copy and Paste it in here.
Regards
TD -
Duplicate target database not working
Hi All,
I want to clone my exisitng DB to other.
I was refering the below link to do the same.
[http://web.njit.edu/info/limpid/DOC/backup.102/b14191/rcmdupdb006.htm|http://web.njit.edu/info/limpid/DOC/backup.102/b14191/rcmdupdb006.htm]
OS:Solaris 10
Oracle version:10.2.0.4.0
What I did tilll now:-
1) Created a database MYDB1 in archive mode
2) Created one tablespace, user and 1 table in DB
3) Registered the MYDB1 in RMAN Db.
4)Created a Pfile from MYDB1 database and changed db value and other values of MYDB1 to MYDB2(Database name to be duplicate)
5)Created a password file
6)Startup MYDB2 in NOMOUNT stage.
7) At RMAN prompt I have done below things to but i have getting the error
rman:rman:>rman target sys/mydb1@mydb1 catalog rman/rman auxiliary sys/mydb2@mydb2
Recovery Manager: Release 10.2.0.4.0 - Production on Fri Sep 7 12:20:22 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: MYDB1 (DBID=3867673817)
connected to recovery catalog database
connected to auxiliary database: MYDB2 (not mounted)
RMAN> DUPLICATE TARGET DATABASE TO mydb2;
Starting Duplicate Db at 07-SEP-12
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=162 devtype=DISK
WARNING: DB_FILE_NAME_CONVERT resulted in invalid ASM names; names changed to diskgroup only.
contents of Memory Script:
set until scn 911233;
set newname for datafile 1 to
"+disk2";
set newname for datafile 2 to
"+disk2";
set newname for datafile 3 to
"+disk2";
set newname for datafile 4 to
"+disk2";
set newname for datafile 5 to
"+disk2";
restore
check readonly
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 07-SEP-12
using channel ORA_AUX_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/07/2012 12:21:01
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
745933 B F A DISK 07-SEP-12 1 1 NO FULL_BACKUP
745934 B F A DISK 07-SEP-12 1 1 NO FULL_BACKUP
RMAN> list backup of database;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
745933 Full 549.12M DISK 00:01:19 07-SEP-12
BP Key: 745935 Status: AVAILABLE Compressed: NO Tag: FULL_BACKUP
Piece Name: /backup/oracle_backup/test_dir/rman_bkp/mydb1_0gnkjokf_1_1
List of Datafiles in backup set 745933
File LV Type Ckp SCN Ckp Time Name
1 Full 980599 07-SEP-12 +DISK1/mydb1/datafile/system.256.793120373
2 Full 980599 07-SEP-12 +DISK1/mydb1/datafile/undotbs1.258.793120373
3 Full 980599 07-SEP-12 +DISK1/mydb1/datafile/sysaux.257.793120373
4 Full 980599 07-SEP-12 +DISK1/mydb1/datafile/users.259.793120373
5 Full 980599 07-SEP-12 +DISK1/mydb1/datafile/tbs_umesh.266.793207735
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP OFF;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backup/oracle_backup/test_dir/rman_bkp/mydb1_%U';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/software/oracle/product/10.2.0/database/dbs/snapcf_mydb1.f'; # default
RMAN> exit
Recovery Manager complete.
@rman:rman:>Please Suggest where i am going wrong..
Regards
Umesh GuptaWARNING: DB_FILE_NAME_CONVERT resulted in invalid ASM names; names changed to diskgroup only.
You must check DB_FILE_NAME_CONVERT parameter on MYDB2 database
or I think you must add DB_FILE_NAME_CONVERT, LOG_FILE_NAME_CONVERT to DUPLICATE Command.
DUPLICATE TARGET DATABASE TO MYDB2
SPFILE
SET
"DB_FILE_NAME_CONVERT"="+DATA/MYDB1/","+DATA/MYDB2"
... Regards
Mahir M. Quluzade
www.mahir-quluzade.com
Maybe you are looking for
-
How do I add the external headphones to SystemSetup- Tone?
Inside Systemsetup->Tone I see only one option: integrated sound. I have no other options to select... How do I add the external headphones (supported by the MacBoock) to the selection list?
-
How can I determine which profile Firefox 5 is currently using?
How can I determine which profile Firefox 5 is currently using?
-
The import parameters were not filled correctly
Hi BW guru's I am working on BW 3.O AND USING A FLAT FILE. I was trying to create hierachy to a infoobject(SalesrepID-SREP). First i enabled the (with hierarchies) tab under the hierarchy tab of change characteristics of SalesrepID, and selected the
-
Whenever I try to start Edge Animate CC 2014 it tells me that I am missing d3dx9_43.dll.
Hello, This has been happening to me since the regular Edge Animate CC. Whenever I try to start the program it simply tells me that I am missing d3dx9_43.dll. I tried installing the latest directx 9.0 from june2010 and I even took the seperate dll fr
-
Hyphenating words at the right margin of a sentence
How do I stop iBooks Author from automatically breaking words that do not fit at the right margin of a line of text into a hyphenated word with the left part at the end of one line and the right part moved to the front of the next line? Many words ar