ORA-02063 Error

Hi all,
I'm trying to load a table from my source systems to my target table on staging area. I just have source table and target table on my mapping. When i try to execute this mapping i get the error "ORA-02063".
1- i have several other mapping from this same source that i can load without problem;
2- if i edit the package for this mapping and execute the select instruction generated directly on my target schema it runs Ok;
3- the major difference between this table and the rest is that this one has more than 7 million records and the others have on the limit 7 hundred thousand (10%).
Why is this happening?
My OWB is 9.2 and database 9.2.
Thanks,
Vitor

When i use the insert statement from the merge on the mapping package and use it directly to do an "INSERT INTO TARGET_TABLE <SELECT INSTRUCTION>" it will insert all the records.
So, i believe the error is generated by the OWB!
My source is an Heterogeneous Source on Informix.
Thanks,
Vitor

Similar Messages

Trying to query data from a view - ORA-01882 and ORA-02063 Errors

Hey there,
I tried to query data from a view that was provided by a colleague. This view works fine and gives correct data using PL/SQL Developer or SQLPLUS, but in SQL Developer, I get the following error:
ORA-01882: Time zone region not found
ORA-02063: preceding line from SYSTOOLS
01882.00000 - "timezone region %s not found"
* Cause: Specified reason name was not found
* Action: Please contact Oracle Customer Support
Vendor Code 1882
Where comes this error message from?! SYSTOOLS is the database link.
Can't see an obvious reason for this error.
OS is Windows 2000 SP4, SQL Developer is v1.1.1.25 BUILD MAIN-25.14
Regards,
Thomas

From Oracle Messages 'Cause and Action'
http://www.oracle.com/technology/products/designer/supporting_doc/des9i_90210/cmnhlp72/messages/ora_messages.htm
ORA-01882, 00000, "timezone region %s not found"
Cause: The specified region name was not found.
Action: Please contact Oracle Customer Support.
Maybe invalid region in NLS_LANG?
"select * from v$nls_parameters"
Starting this script in all developer program and compared result...

I am getting ORA-02063 error while copying bulk data from DBLINK

Hi all ,
I am trying to copy data from DBlink ,whenever i am trying to pull more data ,The db link break down ,
I have try to put /*+ APPEND */ (Hint) in insert statement.Below is the insert code from my procedure
from where i am getting below error
"Error in copy_data_pkg-3113 ORA-03113: end-of-file on communication channel
ORA-02063: preceding line from TESTDBLINK"
Insert code:
INSERT /*+ APPEND */ INTO target_tab
select
col1,
col2,
col3,
col4,
col5,
o_time
FROM padmin.V_tab1@testdblink
    where
trunc (sysmodtime) = trunc(sysdate)-1
and O_time >= al_time
and (CLEAR_TIME is null or CLEAR_TIME >= occur_time)
    and (res_code is null or (UPPER(res_code) not LIKE '%TEST TT%' and UPPER(res_code) not LIKE '%TEST SITE%'))
    and ((UPPER(BRIEF_DESC) not like '%TEST TT%' and UPPER(BRIEF_DESC) not LIKE '%TEST SITE%'))
    and (o_time+(330/(24*60))) <= trunc(SYSDATE)-1/24/60/60
    and catvar IN('POS')
and UPPER(action_var) not like '%SC_NET%' and UPPER(action) not like '%ROAM_NET%' and UPPER(action) not like '%PUP_NET%';
COMMIT ;
Please suggest me ,why i am getting this error.

Can you elaborate the thing... I don't think /*+ APPEND */ this is working for me ,still I am getting same error.
If you have any other suggestion,I would like to hear.
Should i not put commit after some 500 records inserted ? As i am putting commit once after whole data gets inserted.

Accessing DB2 data through DBLINK in Java program recieves ORA-02063 error

Hello,
Is it posible to access a mainframe DB2 table through a Java JDBC connection utilizing a DBLink / Synonym. Using Toad or SQLDeveloper, I can select the DB2 data just fine. Also, PL/SQL programs can access the data without issues. When I try to select data from the DB2 Table in a Java program, I get ORA-01002: fetch out of sequence -- ORA-02063 preceding line from DB2D errors.
The code I am using to test is:
(Note: TBL_LOC_ADR is the Synonym that points to the Mainfram DB2 table)
public static void main(String[] args) {
          Connection con = null;
          Statement stmt = null;
          String query = "SELECT * FROM tbl_loc_adr";
          ResultSet rs;
          try {
               System.out.println("Getting connection");
               con = BatchDBConnection.getDBConnection();
               TestConnection tc = new TestConnection();
               System.out.println("Creating ps");
               stmt = con.createStatement();
               System.out.println("Calling qds");
               rs = stmt.executeQuery(query);
               System.out.println(" Returned data " );
          } catch (Exception e) {
               System.out.println("Error " + e.getMessage());
               e.printStackTrace();
The error occurs on the rs = stmt.executeQuery(query); line.
Thanks for any input into this error. It's been driving me nuts all day.
Chris

Chris,
What's your oracle version? You might be hitting a bug as identified in this metalkink doc id, see if this helps out. Resolution posted in the metalink by applying patches or confirm that you have applied all the required patches.
Doc ID: 456815.1 ORA-01002 ORA-2063 When Profiling DB2/400 Table Accessed by View via Transparent Gateway for DRDA
Regards

ORA- 00937 & ORA-02063 error

I run he folliwng SQL:
(SELECT my_date,
MAX(DECODE(last_retry,1,count(*),0)) AS "1",
MAX(DECODE(last_retry,2,count(*),0)) AS "2"
FROM retry_state@full
GROUP BY my_date)
and I get this Error:
ORA_00937 not a single group group function
ORA-02063 preceding line from FULL
Can anyone please let me know how to solve this problem? Please help!!!

I just get my answer in 0's and 1's. Howvere I need the actual count of tries from
table X from day segmentation 0 thru 8. As John lennon once observed, "Most peculiar, mama". Are you sure you applied my suggestion exactly?
SQL> SELECT my_date,
2         sum(DECODE(last_retry,0,1,0)) AS "0",
3         sum(DECODE(last_retry,1,1,0)) AS "1",
4         sum(DECODE(last_retry,2,1,0)) AS "2",
5         sum(DECODE(last_retry,3,1,0)) AS "3",
6         sum(DECODE(last_retry,4,1,0)) AS "4",
7         sum(DECODE(last_retry,5,1,0)) AS "5",
8         sum(DECODE(last_retry,6,1,0)) AS "6",
9         sum(DECODE(last_retry,7,1,0)) AS "7",
10         sum(DECODE(last_retry,8,1,0)) AS "8"
11 FROM retry_state
12 GROUP BY my_date
13 /
MY_DATE      0    1    2    3    4    5    6    7    8
13-JUN-06    0    3    2    0    0    0    0    0    0
14-JUN-06    0    1    3    0    0    0    0    0    1
15-JUN-06    0    1    1    1    0    0    1    0    1
SQL> Cheers, APC

Intermittent ORA-28511 and ORA-02063 errors.

Hi
I have set up a heterogenous gateway from oracle to SQL Server.
The connection works 95% of the time, but every-so-often, I get the following errors:
ORA-28511: lost RPC connection to heterogeneous remote agent using SID=ORA-28511: lost RPC connection to heterogeneous remote agent using SID=(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=server.company.co.za)(PORT=1511))(CONNECT_DATA=(SID=dg4msql)))
ORA-02063: preceding line from SQLSERVER
This happens mostly when the session have been idle for some time.
My listener.ora contents :
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = server.company.co.za ) (PORT = 1511))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME=dg4msql)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0.2)
(ENV="LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0.2/dg4msql/driver/lib:/u01/app/oracle/product/11.2.0.2/lib")
(PROGRAM=dg4msql)
My initdg4msql.ora
     HS_FDS_CONNECT_INFO=xxx.xx.xxx.xx:1433//JDE_CRP
     # alternate connect format is hostname/serverinstance/databasename
     #HS_FDS_TRACE_LEVEL=DEBUG
     HS_FDS_TRACE_LEVEL=OFF
     HS_FDS_RECOVERY_ACCOUNT=RECOVER
     HS_FDS_RECOVERY_PWD=RECOVER
My tnsnames.ora
dg4msql =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=server.company.co.za)(PORT=1511))
(CONNECT_DATA=(SID=dg4msql))
(HS=OK)
Any ideas please!!!

the gateway itself has no timeout. Please provide more details of your environment (for example the Oracle database version, SQl Server version etc.) and abut the network infrastructure.
Edited by: kgronau on May 11, 2011 4:16 PM
In addition please post the alert.log of your Oracle database for a timeframe of about 1 day.

ORA-01460 and ORA-02063 errors in form built on a view

We have built an apex form on a view against a remote database (via dblink).
Running the page brings back data as desired.
However, clicking on the "edit icon" to make updates results in:
ORA-01460: unimplemented or unreasonable conversion requested ORA-02063: preceding line from my_dblink
I have searched and cannot seem to locate a fix. Can anyone provide a solution or further steps to troubleshoot?
Thanks in advance.

Right now you will be able to base a portal form only on updatable views. Non updatable views are not supported.
As a work around you can use QBE reports to query the data, without having the delete and update links.
Regards,
Sunil.
null

Error in database link(ORA-02063 and ORA-02391)

Hi
database link was working fine till this morning. now when i try to query using the database link, i get the following error
ORA-02391: exceeded simultaneous SESSIONS_PER_USER limit
ORA-02063: preceding line from RMSLIVE
It would beof great help if you can advise why this error is occuring.
many thanks.

The error stack is quite obvious.
Either, the profile, with which the database user on remote database is running, must be modified to allow more connections or investigate the session leak in the application talking over database links.

ORA-02291 - ORA-02063 on merge with dml error logging through DB link

Hello all,
I have 2 DB's and I would like to merge records from A into B with dml error logging through a db link.
Exemple:
merge into B@dblink
using (select ... from A where...)
when matched then
when not matched then
log errors into err$_A reject limit unlimited;
When I use this, and exception is thrown:
ORA-02291: integrity constraint (B.constraint_name) violated - parent key not found
ORA-02063: preceding line from dblink
I've got no idea of what causes this.
Could anyone please help me ?
Thanks !
Regards,
TDE.

Hello damorgan,
Thanks for your answer.
I've well understood that its was a foreign key violation, and I guess that's an error in the source: wee make only logical deletes, and I'm quite sure the problem is there.
Anyway, I really would understand why dml error logging doesn't work in this case.
I'll investigate and keep you informed.
Regards.

Error ORA-02063, using DB LINK

hi,
i've created a DB_LINK from FINANCEIRA.WINXP.LAPTOP Database (_SERVER 01_) to FINANCEIRA.WINXP Database (_SERVER 02_).
The fact is that i have an application connected at the FINANCEIRA.WINXP.LAPTOP side that makes SELECT and INSERT calls to FINANCEIRA.WINXP using the DB_LINK. When an INSERT statement is sent by the application from the FINANCEIRA.WINXP.LAPTOP to the FINANCEIRA.WINXP, i receive an error message: ORA-02063, occurring in the table's Primary Key. When i send the same statement by SQLPLUS from the FINANCEIRA.WINXP.LAPTOP side to the FINANCEIRA.WINXP, it works fine.
somebody can help me ?

let's make a note...
at the first time, the INSERT operation works fine, even by Application or by SQLPLUS, both been sent from the FINANCEIRA.WINXP.LAPTOP side to the FINANCEIRA.WINXP side. So, at the first time we have a row inserted successfuly.
At the second time, i have this error mentioned above when executed by Application. If i execute by SQLPLUS, it works.
what conclusion we can have about this ?
Edited by: Paulo_BR on May 30, 2009 8:57 AM

Work around/Alternate solution for Oracle error ORA-01460 and ORA-02063

After the installation of Oracle.DataAccess version 2.111.7.20, I get the following error.(the code worked fine with Oracle.DataAccess version 9.2.0.700 )
I have attached the error as well as the sample code.
ORA-01460 and ORA-02063 are known bugs in the new ODP but would like to know if there is any Work around/Alternate solution for this problem(other than
the use of stored procs)..
Thanks!
Error:
ORA-01460: unimplemented or unreasonable conversion requested
ORA-02063: preceding line from BSREAD_STAGINGRO at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure, Boolean bCheck)
at Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, String procedure, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, Boolean bCheck)
at Oracle.DataAccess.Client.OracleCommand.ExecuteReader(Boolean requery, Boolean fillRequest, CommandBehavior behavior)
at Oracle.DataAccess.Client.OracleCommand.ExecuteReader()
SampleCode
private bool isValidFieldData(string clientName, string fieldNumber, string uniqueID, string clientID)
using (OracleConnection mBSConnection = new OracleConnection(mBSConnectionString))
OracleDataReader oRdr = null;
OracleCommand Valid_FieldData_Command = null;
try
Valid_FieldData_Command = new OracleCommand();
Valid_FieldData_Command.Connection = mBSConnection;
Valid_FieldData_Command.CommandText = "SELECT uniqueid FROM EXTDB.BSData WHERE agencyid = :agencyid and agencyname=:agencyname AND fieldnumber =:fieldnumber AND uniqueid = :uniqueid";
Valid_FieldData_Command.Parameters.Add(":agencyid", OracleDbType.Varchar2, 255).Value = agencyID;
Valid_FieldData_Command.Parameters.Add(":agencyname", OracleDbType.Varchar2, 255).Value = agencyName;
Valid_FieldData_Command.Parameters.Add(":fieldnumber", OracleDbType.Varchar2, 255).Value = fieldNumber;
Valid_FieldData_Command.Parameters.Add(":uniqueid", OracleDbType.Varchar2, 255).Value = uniqueID;
mBSConnection.Open();
oRdr = Valid_FieldData_Command.ExecuteReader(); ->Error occurs here
The error occurs whenever the length of any of the parameter is increased. But there is no specific length where it is breaking down.
For example in this case, it breaks down with the given error if
agencyID > 8
agencyName > 6
fieldNumber > 9
uniqueid > 6

The problem was mapping input parameter type.
VARCHAR2-type mapping input parameter works with String-type PF parameter. But CHAR-type won't.

How to resolve errors - ORA-01033: ORACLE, or closed, or initialized ,ORA-02063: Previous line from D1558A_IFRSQRY

Hi Expert,
Please tell me how to resolve errors - ORA-01033: ORACLE, or closed, or initialized ,ORA-02063: Previous line from D1558A_IFRSQRY
Thanks and Regards

Google is obviously broken for you: so I've posted what you need to put into your browser.
https://www.google.co.uk/search?q=ORA-01033

PL/SQL: ORA-04052: error occurred when looking up remote object.

Hi All,
I'm getting the following error message while executing a PL/SQL Block.
PL/SQL: ORA-04052: error occurred when looking up remote object UPLDUSER.filestatushistory@FTS
ORA-00604: error occurred at recursive SQL level 1
ORA-03106: fatal two-task communication protocol error
ORA-02063: preceding line from FTSStatement
declare
v_coun number;
begin
select count(*) into v_coun
from updluser.filestatushistory@fts;
end;Back ground of the situation as follows,
My DataBase version 10.2.0.3 DB Name :DB1
Table Owner : UPLDUSER
Table Name : FILESTATUSHISTORY
I have a report user on the same database and I have grant all on the above table to report user
Report User : RPT_FTS
SQL> GRANT ALL ON FILESTATUSHISTORY_V TO RPT_FTS;Now Please find the below database details where I'm getting subjected error.
Database version : 9.2.0.8
DB Name : DB2
User Name : RPT_REPORTS
I Have create a dblink from RPT_REPORTS to RPT_FTS on DB1 and the dblink works fine. But getting the above error while running it.
but When I do the same other 10.2.0.3 db , the above PL/SQL block works fine without any problem.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Now the strange about this is that I have Created a new table on DB1 db like below;
SQL> CREATE TABLE UPLDUSER.ABC AS SELECT * FROM FILESTATUSHISTORY;and retry my code on DB2 (9.2.0.8) after changing the table to ABC and it worked. Now I don't know whats wrong with a original table(FILESTATUSHISTORY).
To over come the problem and a work-a-round method I create a view on the DB1 (RPT_FTS) like the below
SQL> CREATE VIEW FILESTATUSHISTORY AS SELECT * FROM UPLDUSER.FILESTATUSHISTORY;and was able to run the PL/SQL block Remotely.
Just wants To know what whould have been the cause for this .
Cheers
Kanchana

Hi Kanchana,
Perhaps following link of google search has answer to your query
ORA-04052. The search result contains some useful articles whose URLs I shan't post in the forums.
HTH!
*009*

ORA-02070: Error when updating a SQL Server table thru an Oracle View

I have a SQL Server table TIMESHEET which contains a number of VARCHAR and NUMERIC columns plus a DATETIME column.
Only the DATETIME column is giving me trouble.
On the ORACLE side I have a view which selects from the SQL Server table but in order to get the SELECT to work, I had to either put a CAST or TO_DATE function call around the DATETIME field
Below is the relevant part of the 2 view definitions I have tried
create view TIMESHEET as
SELECT
"TsKeySeq" as TS_KEY_SEQ,
"EmployeeNo" as EMPLOYEE_NO,
CAST("PeriodEnding" AS DATE) as PERIOD_ENDING,
. . . (more columns - not relevant)
FROM [email protected];
An update to the view generates this message
ORA-02070: database OLEMSQLPSANTDAS6 does not support CAST in this context
create view TIMESHEET as
SELECT
"TsKeySeq" as TS_KEY_SEQ,
"EmployeeNo" as EMPLOYEE_NO,
TO_DATE("PeriodEnding") as PERIOD_ENDING,
. . . (more columns - not relevant)
FROM [email protected];
An update to the view generates this message
ORA-02070: database OLEMSQLPSANTDAS6 does not support TO_DATE in this context
If I don't include either the TO_DATE() or CAST() then I get
Select Error: ORA-28527: Heterogeneous Services datatype mapping error
ORA-02063:preceding line from OLEMSQLSANTDAS6
Does anyone have any idea how to update a SQL Server DATETIME column thru an ORACLE view?

You can't cast accross heterogenious databases and there is no need to. HSODBC treats SQL Server DATETIME column as DATE. For example, I have SQL Server table:
CREATE TABLE [Ops].[T_JobType](
     [JobType] [varchar](50) NOT NULL,
     [JobDesc] [varchar](200) NULL,
     [InsertDt] [datetime] NOT NULL CONSTRAINT [InsertDt_00000006] DEFAULT (getdate()),
     [InsertBy] [varchar](128) NOT NULL CONSTRAINT [InsertBy_00000006] DEFAULT (user_name()),
     [LastUpdated] [datetime] NOT NULL CONSTRAINT [LastUpdated_00000006] DEFAULT (getdate()),
     [LastUpdatedBy] [varchar](128) NOT NULL CONSTRAINT [LastUpdatedBy_00000006] DEFAULT (user_name()),
CONSTRAINT [T_JobType_PK] PRIMARY KEY CLUSTERED
     [JobType] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 100) ON [DATA01FG]
) ON [DATA01FG]Now on Oracle side I do:
SQL> desc "Ops"."T_JobType"@pbods
Name                                      Null?    Type
JobType                                   NOT NULL VARCHAR2(50)
JobDesc                                            VARCHAR2(200)
InsertDt                                  NOT NULL DATE
InsertBy                                  NOT NULL VARCHAR2(128)
LastUpdated                               NOT NULL DATE
LastUpdatedBy                             NOT NULL VARCHAR2(128)
SQL> select "InsertDt" from "Ops"."T_JobType"@pbods;
InsertDt
18-AUG-08
09-OCT-08
22-OCT-09
18-AUG-08
19-NOV-08
SQL> SY.

ORA-04052: error occurred when looking up remote obj in mapping execution

Hi,
While executing an OWB mapping, I am getting the following error:
============
Starting Execution UII_D_MAP_SPC_INSTALLATION_SIT
Starting Task UII_D_MAP_SPC_INSTALLATION_SIT
ORA-04052: error occurred when looking up remote object [email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-02019: connection description for remote database not found
ORA-02063: preceding 3 lines from BIP2S@BIPDRACONN
ORA-06512: at "UII_ODS_OWNER.UII_D_MAP_SPC_INSTALLATION_SIT", line 73
ORA-06512: at "UII_ODS_OWNER.UII_D_MAP_SPC_INSTALLATION_SIT", line 1672
ORA-06512: at "UII_ODS_OWNER.UII_D_MAP_SPC_INSTALLATION_SIT", line 2353
ORA-06512: at "UII_ODS_OWNER.UII_D_MAP_SPC_INSTALLATION_SIT", line 6838
ORA-06512: at line 1
Completing Task UII_D_MAP_SPC_INSTALLATION_SIT
Completing Execution UII_D_MAP_SPC_INSTALLATION_SIT
============
Actually, here UII_ODS_OWNER itself is the target schema and <<UIIVS.DEVENV1.BT.CO.UK>> is the database in which this schema exists. And the mapping "UII_D_MAP_SPC_INSTALLATION_SIT" is being executed in the same target schema UII_ODS_OWNER.
I am not sure why this above error is coming because such a dblink 'UIIVS.DEVENV1.BT.CO.UK' does not exist in the OWB generated package code. And the 2nd dblink 'BIP2S@BIPDRACONN' does not exist in the code, intead it exists as "BIP2S.DEVENV1.BT.CO.UK@BIPDRACONN" in the package code which is correct (as per OWB configuration & database).
Same error also comes when I try to execute the same mapping from the OWB DEPLOYMENT MANAGER.
Thanks & Regards,
lenin

Good morning Lenin,
Have you checked the implementation of the connectors and are your locations well registered?
Has a similar setup ever worked well?
Can you access the source table using SQL (e.g. with SQL*Plus or TOAD)?
Regards, Patrick

ORA-02063 Error

Similar Messages

Maybe you are looking for