ORA-02084: datbase name is missing a component

Hello,
I am attemtping to configure OMS using EMCA on Windows XP. I get the following errors:
ORA-02084: datbase name is missing a component
Creating local database with SID "OEMREP"...
C:\oracle\ora92\bin\launch.exe C:\oracle\ora92\assistants\dbca dbca.cl -progress_only -emca_internal -createDatabase -templateName Transaction_Processing.dbc -gdbName OEMREP.hsd1.va.comcast.net. -sid OEMREP
Failed to create local database.Processing failed.
Question is what component is the database missing and how do I resolve it?
Thanks.

Try this one:
CREATE DATABASE LINK "SYNO.DELTEMIPPM.HUTCH.IN" connect to
STRMADMIN identified by STRMADMIN using 'SYNO.DELTEMIPPM.HUTCH.IN';
and then check whether the delink is working by the below mentioned command:
select * from tab@"SYNO.DELTEMIPPM.HUTCH.IN";
Regards,
Abhirup.
Kolkata, India.

Similar Messages

Ora-02084 : database name is missing a component

hai all,
i am a newbee to oracle. i am struggling to create a database, any help would be highly appreciated. i have installed Oracle 9i on a RH8.0 system. but while creating database through DBCA, i am getting the error message, "ORA -02084:Oracle database name is missing a component". i ahve gone through the documentation and found that probelm is with ORACLE_SID. i have set all the environment variables(including ORACLE_SID, DB_NAME AND DB_DOMAIN) according to the documentaion and created swap files, temporary space etc.i have set all the environment variables in .bash_profile in ORACLE_HOME.
i have stopped DBCA and gone through the files. i could see that the database is actually created, with initXXX.ora.441414312 file. but once when i started the database with nomount and checked, i could find the control files missing.
thanks in advance,
ramesh.

Probably you are missing value for db_name (or missing parameter db_name) in parameter file.
Note you can still create db manualy (without DBCA).

Database name is missing a component....

I'm doing a 3 server install on Windows 2000 Professional.
While installing the infrastructure, while it tries to create the database I get the warning "database name is missing a component". I'm never asked to enter a database name, so I'm not sure where I'm going wrong.
The infrastructure hostname is "in", it's in workgroup "workgroup", and the fully qualified hostname is "in.sdia.com". It's IP address is 192.168.45.10. In the hosts file I added the following line after the default localhost entry:
192.168.45.10 in.sdia.com in
In the infrastructure install my instance name is "instance1".
I can finish the infrastructure install (and it reports it as successful), but I then get the same error doing the information store install, after which it fails on the database creation.
Any ideas?

How do you double quote the db name in a single box installation on Windows ? In a single box inst, you do not get the chance to specify the name that is causing the trouble, namely iasd.domainname.in.something. On windows, I tried manually running the same command that, according to logs, was failing, but could not get this to work. I tried all alternatives I could think of (-gdbname iasdb.aaa.in.xxxx.fi / "iasdb.aaa.in.xxxx.fi" / 'iasdb.aaa.in.xxxx.fi' / ""iasdb.aaa.in.xxxx.fi"" / '"iasdb.aaa.in.xxxx.fi"' / "'iasdb.aaa.in.xxxx.fi'") but none of them works. Some quickly spit out an error about an error in the name, while some fail only later with ORA-02084. What should I do ?

Installing Agent Configruation Assistant and get Error ora-02084

Hello
I am installing oracle 9i using oracle universal installer. Everything was going fine until installer tried to configure Oracle Database Configuration and Agent Configuration Assistant. Both failed with error ora-02084 with following details:
Parameter "orahome" = C:\oracle\oracle92
Parameter "nodeinfo" = NO_VALUE
Agent Service Failed.
I looked up the errror message and found
ORA-02084: database name is missing a component
Cause: The complete database name was not provided.
Action: Specify the full database name.
But where do I specify the full db name, is it a folder that i have to rename?
your help will be appreciated.THANKS
JJ

hi,
I just got the same error. I fixed it by choosing CUSTOM install and removing any part of the SID and Repository name that started or finished with a period. On my case something like this was created by the Wizard: OEMREP.mynetworkname.ad.mypcname. I just left OEMREP.

Help for: ORA-01103: database name PRIMARY in control file is not STANDBY

Hello all, this will be my first post to the support forum. I'm an associate dba with just 6 months on the job, so if I've forgotten something or not given some infromation that is needed please let me know.
I've also combed the forums/internet, and some of the answers haven't helped. The Oracle Document ORA-1103 While Mounting the Database Using PFILE [ID 237073.1] says my init.ora file is corrupted, but creating a new init.ora file from the spfile does not help. Neither does just starting from the spfile. I have older copies of the init.ora file and the spfiles that the database was running on previously, so I believe they are good.
This standby NIRNASD1 has existed previously, I had to refresh the primary NIKNASD2, and then re-instantiate NIRNASD1 after the refresh is complete.
My env is set correctly, and my ORACLE_SID has been exported to NIRNASD1
NIKNASD2 = Primary Database
NIRNASD1 = Secondary/Standby Database
Goal: Creation of Logical Standby NIRNASD1 after creating Physical Standby from NIKNASD2
My database versions are 10.2.0.4.0, and the databases are on a Unix server. Both databases are located on separate servers.
Steps that I have taken:
I used RMAN to backup our primary database to the staging area:
$ rman target /
run {
backup database
format '/datatransa/dg_stage/%U'
include current controlfile for standby;
sql "alter system archive log current";
backup archivelog all format '/datatransa/dg_stage/%U';
I used RMAN to Create Secondary Database utilizing RMAN DUPLICATE command.
RMAN> run {
2> allocate auxiliary channel auxdisk device type disk;
3> duplicate target database for standby NOFILENAMECHECK;
4> }
On Secondary database I started Managed Recovery mode
SQL> shutdown immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
(I used pfile here, thinking that I needed to mount the database to the pfile so that the database would see the change in the dataguard parameters in the init.ora file, the change from logical to physical- I commeneted out the logical and uncommented the physical line)
# Dataguard Parameters
For logical standby, change db_name to name of standby database.
db_name=NIKNASD2 ### for physical, db_name is same as primary
#db_name=NIRNASD1 ### for logical, db_name is same as unique_name
SQL> STARTUP MOUNT PFILE = /oraa/app/oracle/product/1020/admin/NIRNASD1/pfile/initNIRNASD1.ora;
ORACLE instance started.
Total System Global Area 1577058304 bytes
Fixed Size 2084368 bytes
Variable Size 385876464 bytes
Database Buffers 1174405120 bytes
Redo Buffers 14692352 bytes
Database mounted.
SQL> ALTER DATABASE recover managed standby database using current logfile disconnect;
I then verified the Data Guard Configuration by using “alter system archive log current;” on the primary database and watching the sequence number change in the secondary database.
I made sure that:
•     The primary database was in MAXIMUM PERFORMANCE MODE
•     Stopped managed recover on the standby database: alter database recover managed standby database cancel;
•     Built a logical standby data dictionary on the primary database
•     The db_name in init.ora was changed (this is in our document at my job)
•     I changed my database name (from physical to logical) in my init.ora pfile (reverse of what I did above)
# Dataguard Parameters
For logical standby, change db_name to name of standby database.
#db_name=NIKNASD2 ### for physical, db_name is same as primary
db_name=NIRNASD1 ### for logical, db_name is same as unique_name
I then went to shutdown my standby database and re-start it in a mount exclusive state, which is where I get the ORA-01103 Error (Again I used the pfile, thinking that I needed to tell the database it is now a logical standby):
SQL> shutdown immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> STARTUP EXCLUSIVE MOUNT PFILE = /oraa/app/oracle/product/1020/admin/NIRNASD1/pfile/initNIRNASD1.ora;
ORACLE instance started.
Total System Global Area 1577058304 bytes
Fixed Size 2084368 bytes
Variable Size 385876464 bytes
Database Buffers 1174405120 bytes
Redo Buffers 14692352 bytes
ORA-01103: database name 'NIKNASD2' in control file is not 'NIRNASD1'
From what I understand of the process, the name in the control file is correct, I want it to be NIRNASD1. But the database for some reason thinks it should be NIKNASD2. The following are the parts of my init.ora file that include the dataguard parameters:
# Database Identification
db_domain=""
#db_name=NIRNASD1
#db_unique_name=NIRNASD1
# File Configuration
control_files=("/oradba2/oradata/NIRNASD1/control01.ctl", "/oradba3/oradata/NIRNASD1/control02.ctl", "/oradba4/oradata/NIRNASD1/control03.ctl")
# Instance Identification
instance_name=NIRNASD1
# Dataguard Parameters
#db_name=NIKNASD2 ### for physical, db_name is same as prmary
db_name=NIRNASD1 ### for logical, db_name is same as unique_name
db_unique_name=NIRNASD1
dg_broker_start=TRUE
db_file_name_convert='NIKNASD2','NIRNASD1'
log_file_name_convert='NIKNASD2','NIRNASD1'
log_archive_config='dg_config=(NIRNASD1,NIKNASD2)'
log_archive_dest_1='LOCATION="/oraarcha/NIRNASD1/" valid_for=(ONLINE_LOGFILES,all_roles) db_unique_name=NIRNASD1'
#log_archive_dest_2='LOCATION="/oraarcha/NIKNASD2/" valid_for=(standby_logfiles,standby_roles) db_unique_name=NIRNASD1'
log_archive_dest_2='LOCATION="/oraarcha/NIKNASD2/" valid_for=(standby_logfile,standby_role) db_unique_name=NIRNASD1'
STANDBY_ARCHIVE_DEST='LOCATION=/oraarcha/NIKNASD2/'
# Parameters are not needed since this server will NOT become primary
#log_archive_dest_2='service=NIKNASD2
# valid_for=(online_logfiles,primary_role)
# db_unique_name=NIKNASD2'
fal_server='NIKNASD2'
fal_client='NIRNASD1'
I would appreciate any help, or pointing me in the right direction. I'm just missing something. I am reviewing the documents for building a physical and logical standby from oracle. Just not sure where to go from here.
Thank you
Edited by: 977917 on Dec 19, 2012 5:49 PM

First of all, thank you both for answering my post. I've pulled up Mr. Hesse's page and will make it a go-to staple.
We're in the process of upgrading our databases, but we have 130+ databases and only six Oracle dba's, and I'm one of them. It's a large corporation, and things move at a "slow and tested" pace.
The pfile parameters listed above are from my secondary/standby database. And I do want to create a logical standby.
I forgot to mention that we do use DataGuard Broker, but I did not think that would be the cause of why the database was starting up incorrectly, so I did not mention it. My apologies there.
As far as the db_name, here's my question on that. It's my understanding the the db_name should be the name of the primary database when you are working with a physical standby, but as soon as you convert it to logical, you should change the db_name to the secondary/standby database? Am I correct on that?
Leading from that, during the process of creating the physical standby and converting the physical standby to the logical standby, should I change the db_name in the secondary/standby database in the spfile and never use the pfile at all? For instance, when I create the physical standby I have to change the db_name in the standby to the PRIMARY database, so that makes me think I should change db_name in the spfile? (If you see above, I changed db_name in the pfile and did a startup pfile)
This morning I was able to reach out to a fellow DBA (they are were asleep when I posted this last night), and they tried a few things. We had a redirect in the standby directory /oraa/app/oracle/product/1020/dbs folder that looked like this: spfileNIRNASD1.ora -> /oraa/app/oracle/product/1020/admin/NIRNASD1/pfile/spfileNIRNASD1.ora
She removed the redirect and the startup mount exclusive then worked without the error.
Thank you again for your help Mr.Quluzade and Mr. Hesse, I appreciate you all taking the time to teach someone new to the craft. I will definitely read up on the link that you sent me.
Chris Cranford

ORA-01161: database name

DB 10.2.0.4
AIX 5.2
I am trying to make clone.Even I made clone, the database was up but when I saw in the alert log file it was giving continue below error(1) and the size of alert log file was getting increase so I decided to restore missed file and I restored and trying to create control file but this time it is giving below second(2) error.
1:
ORA-00376: file 35 cannot be read at this time
ORA-01111: name for data file 35 is unknown - rename to correct file
ORA-01110: data file 35: '/vol01/oracle/product/10g/dbs/MISSING00035'
2:
SQL> @clone.ctl
CREATE CONTROLFILE SET DATABASE "dev" RESETLOGS
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01161: database name prod in file header does not match given name of dev
ORA-01110: data file 35: '/vol01/oracle/index08.dbf'
Suggest me.

You could have missed that datafile in create controlfile statement, thats the reason for file naming convention to MISSING
--okay but now what is the solution. That missing file does not physical exist at error location.

Impdp: looks right, but still getting ORA-39087: directory name invalid

This is fairly mysterious, particularly since I've done this many other times without problems.
I created the directory C:\OracleImportTest on the server's filesystem, created a corresponding directory object DP_DIR in Oracle, and granted my user read and write access to it. I've been staring at it and trying different things all morning, but I still get the following results:
C:\test>impdp cgernon/**** DIRECTORY=dp_dir SERVICE_NAME=test1 DUMPFILE=export.dmp LOGFILE=import.log
Import: Release 11.1.0.6.0 - Production on Friday, 27 May, 2011 12:01:08
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 11g Release 11.1.0.6.0 - Production
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
ORA-39087: directory name DP_DIR is invalid"But Mercurial!" you say, "surely you screwed something up setting up the directory and either it doesn't exist or you don't have access to it!" I would be the first to agree that is the most likely cause of the problem, but performing the following queries to double-check leaves me in a state of complete confusion:
select * from all_directories;
OWNER DIRECTORY_NAME DIRECTORY_PATH
SYS   DP_DIR         C:\OracleImportTest
select * from user_tab_privs where table_name = 'DP_DIR';
GRANTEE OWNER TABLE_NAME GRANTOR PRIVILEGE GRANTABLE HIERARCHY
CGERNON SYS   DP_DIR     SYS     READ      NO        NO
CGERNON SYS   DP_DIR     SYS     WRITE     NO        NO        Does anyone know of any other conditions that can trigger this error, or see anything I'm missing here? I am thoroughly mystified. Thanks!

Good suggestion, but I'm still getting the same error ... using that command, as typed above.
HOWEVER, changing the command as follows works:
impdp cgernon/****@test1 DIRECTORY=dp_dir DUMPFILE=export.dmp LOGFILE=import.logWhich brings up another question. In the past, I've used the SERVICE_NAME option to specify the TNS Name for the database instance I want to connect to. Is that not what this option actually represents? And if not, why was it working for me in the past?
At this point, I guess my original problem is resolved, but if anyone can explain the SERVICE_NAME option to me, I would appreciate it - thanks!

LSO_MSS Manage Participation Employee Name is missing

Helo All,
I am facing a strange problem in LSO.
When Manager access the Manage Participation iview, Under Direct Reportees, we could see Object Type as P, Position and Org Unit.
But Employee name is missing. Instead of Name dot(.) is displayed.
I checked his roles and authorisataions. everything looks ok for me, and i also checked with other managers login, all others are able to see name of the employee.
That will be great, if you can provide me your inputs.
Thanks
Gita

Please check SAP Notes
1431991
1457145
Please also check if in SE80 > Wb dyn. component (FPM_GAF_COMPONENT)
LSO_MANAGE_PARTICIPANTS Book Participant
> LSO_MANAGE_PARTICIPANTS_MGR Book Participant (Test this)
Test from this place. Can you see all the options here.
Best Regards
Chetan

How to hide or do not show the receipt's name after miss called?

1. How to hide or do not show the receipt's name after miss called?
2. I do not want to show my message statement in the screen.

I have also registered to this forum to inform that the problem with showing the MAC-address in the sidebar of the finder is still not solved.
The strange thing is that the Embedded Web Server says:
"This specifies the Bonjour domain name assigned to the device, in the form <host name>.local. If a user-specified host name has not been assigned, the default host name HPxxxxxx is used, where xxxxxx are the last 6 digits of the LAN hardware (MAC) address. This option cannot be modified."
But I did assign a user-specified host name and that name does show-up everywere (also within Bonjour), except in the sidebar of the finder (hp###xx##x####). Lots of people have the same issue, when searching on the interet, but not one has found the solution.
Please help with solving this issues?

Type '[component name]' in CSS selector '[component name]' must be qualified with a namespace

I've recently upgraded my SDK to allow me encorporate other features such as the Text Layout Framework and such. To avoid issues i've had to make Flash player 10 as required, which is where the problems are occuring in my main project.
We knew the switch would cause some issues, and we now have a lovely batch of 100+ Warnings, that are all along the lines of
Type '[component name]' in CSS selector '[component name]' must be qualified with a namespace
all the warnings are on line locations that have no reference to the component they are talking about.. so i'm kinda stumped on what to do. Anybody else run into this issue before?
cheers

<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
      xmlns:s="library://ns.adobe.com/flex/spark"
      xmlns:mx="library://ns.adobe.com/flex/halo" >
<fx:Style>
@namespace s "library://ns.adobe.com/flex/spark";
@namespace mx "library://ns.adobe.com/flex/halo";
Button
    // The warning
</fx:Style>
<s:Button label="提交" textAlign="center" height="30"/>
</s:Application>
I think you have use flex4.
Please change the code to :
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
      xmlns:s="library://ns.adobe.com/flex/spark"
      xmlns:mx="library://ns.adobe.com/flex/halo" >
<fx:Style>
@namespace s "library://ns.adobe.com/flex/spark";
@namespace mx "library://ns.adobe.com/flex/halo";
s|Button
    // ok. The is style for spark button }
mx|Button
    //ok. The is style for halo button
</fx:Style>
<s:Button label="提交" textAlign="center" height="30"/>
</s:Application>

Entry for host name is missing or empty (Secure Store key: admin/host/).

Hi All,
I am in the process of installing EP7 on SLES9 and MaxDB 7.6 on a clustered HA environment where the SCS, DB and JC components are installed under and referenced by their virtual hostname (eg. sapinst SAPINST_USE_HOSTNAME <virt name>).
The SCS instance is installed, the Database Instance is installed and I'm currently in the process of Installing the JC and Deploying the EP packages.
During the installation, SDM is put into standalone mode and sapinst tries to deploy the package EPBC06_0.SCA where it fails and the sdm_server.err shows :
"com.sap.sdm.serverext.servertype.inqmy.TargetEngineConfigurationException: Cannot retrieve Engine logon data from Secure Store: Entry for host name is missing or empty (Secure Store key: admin/host/). at com.sap.sdm.serverext.servertype.inqmy.InQMyTargetSystemConfigurator.getLoginDataFromSecStoreInQMyTargetSystemConfigurator.java:286) at com.sap.sdm.serverext.servertype.inqmy.InQMyTargetSystemConfigurator.getEngineLoginDataInQMyTargetSystemConfigurator.java:197) at com.sap.sdm.serverext.servertype.inqmy.EngineStateServiceImpl.determineCurrentEngineStateEngineStateServiceImpl.java:53) at com.sap.sdm.app.proc.deployment.states.State.determineJ2EEEngineState(State.java:97) at com.sap.sdm.app.proc.deployment.states.StateBeforeFirstDeployment.getJ2EEEngineStateChangeDescriptionStateBeforeFirstDeployment.java:75) at com.sap.sdm.app.view.proc.deployment.mapper.StateMapper.map(StateMapper.java:56) at com.sap.sdm.app.view.proc.deployment.mapper.FlowMapper.map(FlowMapper.java:28) at com.sap.sdm.app.view.session.AppViewUpdater.updateAppView(AppViewUpdater.java:22) at com.sap.sdm.app.view.session.AppViewUpdater.sessionStateChanged(AppViewUpdater.java:18) at com.sap.sdm.app.proc.deployment.impl.SessionStateObserversImpl.notifySessionStateChangedSessionStateObserversImpl.java:46) at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:85) at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59) at com.sap.sdm.app.view.controllers.DeployEventProcessor.processEvent(DeployEventProcessor.java:11) at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.processEvent(DeployCmdProcessor.java:264) at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.process(DeployCmdProcessor.java:108) at com.sap.sdm.gui.server.GuiAdminRoleCmdProcessor.processGuiAdminRoleCmdProcessor.java:72) at com.sap.sdm.is.cs.session.server.SessionCmdProcessor.process(SessionCmdProcessor.java:67) at com.sap.sdm.is.cs.cmd.server.CmdServer.execCommandCmdServer.java:76) at com.sap.sdm.client_server.launch.ServerLauncher$ConnectionHandlerImpl.handle(ServerLauncher.java:286) at com.sap.sdm.is.cs.ncserver.NetCommServer.serveNetCommServer.java:43) at com.sap.sdm.is.cs.ncwrapper.impl.ServiceWrapper.serveServiceWrapper.java:39) at com.sap.bc.cts.tp.net.Worker.run(Worker.java:50) at java.lang.Thread.run(Thread.java:816)"
The same problem occurs if I try to deploy this package or any other package using SDM in standalone or integrated mode.
configtool -> Secure Store -> admin/host/<SID> is the virtual hostname of the JC instance.
I've tried the following to no avail:
- Changed configtool -> Secure Store -> admin/host/<SID> to be the physical hostname of the box.
- Changed configtool -> Server -> Dispatcher -> Service -> P4 -> bindhost (from 0.0.0.0 to JC virt IP).
- Changed the <Host> entry in sdmrepository.sdc from <phys hostname> to <jc virt hostname>.
The SAPLOCALHOST, SAPGLOBALHOST all seem to be set correctly in the SAP profiles.
Has anyone had this issue? If so, what do I need to check/change? Any ideas?
Notice the message does not reference the <SID> in "admin/host", could this be related to the issue? If so, what can cause this?
TIA
Anthony

Hi All,
Just an update, I was able to get around my problems by patching the 2004s media from sp6 to sp8, uninstalling my scs, and database and re-installing from the patched media.

The TADIR entry for Program name is missing in ABAP report

Hi,
I created an User group , Infoset & ABAP query, generated a report with the help of ABAP Query.
However when I did the extended syntax check for the same i got the fatal error.
"The TADIR entry for <Program name> is missing
(Message cannot be hidden using comment)"
Could you please let me know why the above error is being given & how we can remove the same.
Thanks
Vinay Pasalkar

Moved to ABAP General, thanks for pointing this out. In the future you can use the yellow triangle on the top right of each message to report such cases, they will be taken care of.
Thomas

SDK is missing GPL component

I am using Flash Builder 4.7 and today I upgraded to the AIR 3.6 SDK which I got from here:
http://www.adobe.com/devnet/air/air-sdk-download.html
And then replaced the existing AIR 3.5 SDK by following the instructions here:
http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder. html
My application (which is almost complete) runs fine in the AIR simulator but when I try to run it in debug mode on my iPhone I get this error:
Error occurred while packaging the application:
SDK is missing GPL component /Applications/Adobe Flash Builder 4.7/eclipse/plugins/com.adobe.flash.compiler_4.7.0.349722/AIRSDK/lib/ aot/bin/as/as-arm
What am I missing? I have worked hard core on this app over the last couple months and have installed and ran it many many times.
- Randy

I solved my own issue and it was caused by the confusing instructions here:
http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html
Firstly the link says overlay yet the instructions are for "update" which is consistent with the instructions because no overlay occurs. The user is instructed to delete all the contents in AIRSDK directory and run a command line that unpacks the new files in place. Then there are instructions to copy the contents of the AOT from the old folder over. This was where I made my mistake. I simply replaced this directory which replaced the contents and suddenly some key files were missing.
To fix this, I reinstalled the old AIRSDK directory and ran the command line which OVERLAID the new SDK files over the old ones which replaces the necessary files with upgraded ones and leaves the rest intact. Now my project compiles without error.
Adobe, this is a problem. I realize that "overlaying" in this manner is not clean and can leave garbage behind, but your instructions on this page are problematic. Can you please devise a cleaner, easier and less problematic way of updating the SDK that does not require the command line?
- Randy

ORA-01504: database name 'DEV1' does not match parameter db_name 'PROD1'

Hi, All -
This is my first time cloning a database. The recovery finished but gave me the following error message. All the parameters in the pfile are set to "DEV1". I believe that the parameter db_name 'PROD1' exists in the control file and causing this error. The control file is under ASM.
How can I change the parameter in the control file and bring the 'DEV1' cloned database up? Also, how can I avoid this issue next time I do a clone?
Thanks in advance!
Oracle 10g Release 2 on RHEL5
Database cloning using RMAN Duplicate > ORA-01504: database name 'DEV1' does not match parameter db_name 'PROD1'
ASMCMD> ls
control01.ctl
current.275.729098001
archive log filename=/u001/dbsvr/dev1/1_131706_653848580.dbf recid=59 stamp=741953991
media recovery complete, elapsed time: 00:09:31
*Finished recover at 01-FEB-11*
contents of Memory Script:
   shutdown clone;
   startup clone nomount ;
executing Memory Script
database dismounted
Oracle instance shut down
connected to auxiliary database (not started)
Oracle instance started
Total System Global Area     725614592 bytes
Fixed Size                     2075592 bytes
Variable Size                448791608 bytes
Database Buffers             268435456 bytes
Redo Buffers                   6311936 bytes
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "DEV1" RESETLOGS ARCHIVELOG
MAXLOGFILES     50
MAXLOGMEMBERS      5
MAXDATAFILES      100
MAXINSTANCES     1
MAXLOGHISTORY     5445
LOGFILE
GROUP 1 '+DATA3/dev1/datafile/redo01.log' SIZE 100 M ,
GROUP 2 '+DATA3/dev1/datafile/redo02.log' SIZE 100 M ,
GROUP 3 '+DATA3/dev1/datafile/redo03.log' SIZE 100 M
DATAFILE
'+DATA3/dev1/datafile/system01.dbf'
CHARACTER SET WE8ISO8859P1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 02/01/2011 10:30:17
RMAN-06136: ORACLE error from auxiliary database: ORA-01503: CREATE CONTROLFILE failed
ORA-01504: database name 'DEV1' does not match parameter db_name 'PROD1'
RMAN>
RMAN> **end-of-file**
RMAN>

Respected, Sybrand Bakker -
Thanks for constructive feedback!
Here are the command that I ran.
RMAN> connect target sys/<password>@PROD1
connected to target database: PROD1 (DBID=556212836)
RMAN> connect auxiliary sys/<password>
connected to auxiliary database: DEV1 (not mounted)
RMAN> @rman_dup.sql
rman_dup.sql contains
run {
    allocate auxiliary channel d1 type disk;
set newname for datafile 1 to '+DATA3/dev/datafile/system01.dbf';
set newname for datafile 2 to '+DATA3/dev/datafile/undotbs01.dbf';
set newname for datafile 3 to '+DATA3/dev/datafile/cwmlite01.dbf';
set newname for datafile 4 to '+DATA3/dev/datafile/drsys01.dbf';
set newname for datafile 5 to '+DATA3/dev/datafile/example01.dbf';
set newname for datafile 6 to '+DATA3/dev/datafile/indx01.dbf';
set newname for datafile 7 to '+DATA3/dev/datafile/odm01.dbf';
set newname for datafile 8 to '+DATA3/dev/datafile/tools01.dbf';
set newname for datafile 9 to '+DATA3/dev/datafile/users01.dbf';
set newname for datafile 10 to '+DATA3/dev/datafile/xdb01.dbf';
set newname for datafile 11 to '+DATA3/dev/datafile/cons01.dbf';
set newname for datafile 12 to '+DATA3/dev/datafile/survey01.dbf';
set newname for datafile 13 to '+DATA3/dev/datafile/mem201.dbf';
set newname for datafile 14 to '+DATA3/dev/datafile/cons02.dbf';
set newname for datafile 15 to '+DATA3/dev/datafile/mem202.dbf';
set newname for datafile 16 to '+DATA3/dev/datafile/cater01.dbf';
set newname for datafile 17 to '+DATA3/dev/datafile/users02.dbf';
set newname for datafile 18 to '+DATA3/dev/datafile/mar_data01.dbf';
set newname for datafile 19 to '+DATA3/dev/datafile/sysaux01.dbf';
set newname for datafile 20 to '+DATA3/dev/datafile/streams_tbs_01.dbf';
set newname for datafile 21 to '+DATA3/dev/datafile/users03.dbf';
set newname for tempfile 1 to '+DATA3/dev1/tempfile/temp01.dbf';
duplicate target database to dev1
until scn 48712532746
logfile
   '+DATA3/dev1/datafile/redo01.log' size 100M,
   '+DATA3/dev1/datafile/redo02.log' size 100M,
   '+DATA3/dev1/datafile/redo03.log' size 100M;
}Edited by: CipherDBA on Feb 3, 2011 10:50 AM

ORA-01161: database name DEV in file header does not match given name UAT

This is my cloning process.... I get the following errors.. I also double check with my process and still couldn't find anything.
SQL> @backup_control.sql
ORACLE instance started.
Total System Global Area 479298392 bytes
Fixed Size                   742232 bytes
Variable Size             385875968 bytes
Database Buffers           81920000 bytes
Redo Buffers               10760192 bytes
CREATE CONTROLFILE REUSE DATABASE "UAT" NORESETLOGS ARCHIVELOG
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01161: database name OBS in file header does not match given name of UAT
ORA-01110: data file 1: '/u01/oracle/uatdata/system01.dbf'
Any ideas of this error?
Best Regards,
Amy

Please see followings:
STARTUP NOMOUNT
CREATE CONTROLFILE SET DATABASE "OBS" RESETLOGS ARCHIVELOG
-- SET STANDBY TO MAXIMIZE PERFORMANCE
MAXLOGFILES 16
MAXLOGMEMBERS 2
MAXDATAFILES 500
MAXINSTANCES 1
MAXLOGHISTORY 2042
LOGFILE
GROUP 1 '/u01/oracle/obsdata/log01a.dbf' SIZE 10M,
GROUP 2 '/u01/oracle/obsdata/log02a.dbf' SIZE 10M,
GROUP 3 '/u01/oracle/obsdata/log03a.dbf' SIZE 10M,
GROUP 4 '/u01/oracle/obsdata/log04a.dbf' SIZE 10M
-- STANDBY LOGFILE
DATAFILE
'/u01/oracle/obsdata/system01.dbf',
'/u01/oracle/obsdata/system02.dbf',
'/u01/oracle/obsdata/system03.dbf',
'/u01/oracle/obsdata/system04.dbf',
'/u01/oracle/obsdata/system05.dbf',
'/u01/oracle/obsdata/rbs01.dbf',
'/u01/oracle/obsdata/ctxd01.dbf',
'/u01/oracle/obsdata/owad01.dbf',
'/u01/oracle/obsdata/abmd01.dbf',
'/u01/oracle/obsdata/abmx01.dbf',
'/u01/oracle/obsdata/akd01.dbf',
'/u01/oracle/obsdata/akx01.dbf',
'/u01/oracle/obsdata/alrd01.dbf',
'/u01/oracle/obsdata/alrx01.dbf',
'/u01/oracle/obsdata/amsd01.dbf',
'/u01/oracle/obsdata/amsx01.dbf',
'/u01/oracle/obsdata/amvd01.dbf',
'/u01/oracle/obsdata/amvx01.dbf',
'/u01/oracle/obsdata/apd01.dbf',
'/u01/oracle/obsdata/apx01.dbf',
'/u01/oracle/obsdata/applsysd01.dbf',
'/u01/oracle/obsdata/applsysx01.dbf',
'/u01/oracle/obsdata/ard01.dbf',
'/u01/oracle/obsdata/arx01.dbf',
'/u01/oracle/obsdata/asfd01.dbf',
'/u01/oracle/obsdata/asfx01.dbf',
'/u01/oracle/obsdata/asgd01.dbf',
'/u01/oracle/obsdata/asgx01.dbf',
'/u01/oracle/obsdata/asod01.dbf',
'/u01/oracle/obsdata/asox01.dbf',
'/u01/oracle/obsdata/astd01.dbf',
'/u01/oracle/obsdata/astx01.dbf',
'/u01/oracle/obsdata/axd01.dbf',
'/u01/oracle/obsdata/axx01.dbf',
'/u01/oracle/obsdata/azd01.dbf',
'/u01/oracle/obsdata/azx01.dbf',
'/u01/oracle/obsdata/bend01.dbf',
'/u01/oracle/obsdata/benx01.dbf',
'/u01/oracle/obsdata/bicd01.dbf',
'/u01/oracle/obsdata/bicx01.dbf',
'/u01/oracle/obsdata/bild01.dbf',
'/u01/oracle/obsdata/bilx01.dbf',
'/u01/oracle/obsdata/bimd01.dbf',
'/u01/oracle/obsdata/bimx01.dbf',
'/u01/oracle/obsdata/bisd01.dbf',
'/u01/oracle/obsdata/bisx01.dbf',
'/u01/oracle/obsdata/bixd01.dbf',
'/u01/oracle/obsdata/bixx01.dbf',
'/u01/oracle/obsdata/bomd01.dbf',
'/u01/oracle/obsdata/bomx01.dbf',
'/u01/oracle/obsdata/bscd01.dbf',
'/u01/oracle/obsdata/bscx01.dbf',
'/u01/oracle/obsdata/cctd01.dbf',
'/u01/oracle/obsdata/cctx01.dbf',
'/u01/oracle/obsdata/ced01.dbf',
'/u01/oracle/obsdata/cex01.dbf',
'/u01/oracle/obsdata/cnd01.dbf',
'/u01/oracle/obsdata/cnx01.dbf',
'/u01/oracle/obsdata/crpd01.dbf',
'/u01/oracle/obsdata/crpx01.dbf',
'/u01/oracle/obsdata/csd01.dbf',
'/u01/oracle/obsdata/csx01.dbf',
'/u01/oracle/obsdata/cscd01.dbf',
'/u01/oracle/obsdata/cscx01.dbf',
'/u01/oracle/obsdata/csdd01.dbf',
'/u01/oracle/obsdata/csdx01.dbf',
'/u01/oracle/obsdata/csfd01.dbf',
'/u01/oracle/obsdata/csfx01.dbf',
'/u01/oracle/obsdata/cspd01.dbf',
'/u01/oracle/obsdata/cspx01.dbf',
'/u01/oracle/obsdata/csrd01.dbf',
'/u01/oracle/obsdata/csrx01.dbf',
'/u01/oracle/obsdata/cssd01.dbf',
'/u01/oracle/obsdata/cssx01.dbf',
'/u01/oracle/obsdata/cuad01.dbf',
'/u01/oracle/obsdata/cuax01.dbf',
'/u01/oracle/obsdata/cufd01.dbf',
'/u01/oracle/obsdata/cufx01.dbf',
'/u01/oracle/obsdata/cuid01.dbf',
'/u01/oracle/obsdata/cuix01.dbf',
'/u01/oracle/obsdata/cund01.dbf',
'/u01/oracle/obsdata/cunx01.dbf',
'/u01/oracle/obsdata/cupd01.dbf',
'/u01/oracle/obsdata/cupx01.dbf',
'/u01/oracle/obsdata/cusd01.dbf',
'/u01/oracle/obsdata/cusx01.dbf',
'/u01/oracle/obsdata/czd01.dbf',
'/u01/oracle/obsdata/czx01.dbf',
'/u01/oracle/obsdata/eaad01.dbf',
'/u01/oracle/obsdata/eaax01.dbf',
'/u01/oracle/obsdata/ecd01.dbf',
'/u01/oracle/obsdata/ecx01.dbf',
'/u01/oracle/obsdata/ecxd01.dbf',
'/u01/oracle/obsdata/ecxx01.dbf',
'/u01/oracle/obsdata/engd01.dbf',
'/u01/oracle/obsdata/engx01.dbf',
'/u01/oracle/obsdata/evmd01.dbf',
'/u01/oracle/obsdata/evmx01.dbf',
'/u01/oracle/obsdata/fad01.dbf',
'/u01/oracle/obsdata/fax01.dbf',
'/u01/oracle/obsdata/femd01.dbf',
'/u01/oracle/obsdata/femx01.dbf',
'/u01/oracle/obsdata/fiid01.dbf',
'/u01/oracle/obsdata/fiix01.dbf',
'/u01/oracle/obsdata/flmd01.dbf',
'/u01/oracle/obsdata/flmx01.dbf',
'/u01/oracle/obsdata/fptd01.dbf',
'/u01/oracle/obsdata/fptx01.dbf',
'/u01/oracle/obsdata/frmd01.dbf',
'/u01/oracle/obsdata/frmx01.dbf',
'/u01/oracle/obsdata/fvd01.dbf',
'/u01/oracle/obsdata/fvx01.dbf',
'/u01/oracle/obsdata/gld01.dbf',
'/u01/oracle/obsdata/glx01.dbf',
'/u01/oracle/obsdata/gmad01.dbf',
'/u01/oracle/obsdata/gmax01.dbf',
'/u01/oracle/obsdata/gmdd01.dbf',
'/u01/oracle/obsdata/gmdx01.dbf',
'/u01/oracle/obsdata/gmed01.dbf',
'/u01/oracle/obsdata/gmex01.dbf',
'/u01/oracle/obsdata/gmfd01.dbf',
'/u01/oracle/obsdata/gmfx01.dbf',
'/u01/oracle/obsdata/gmid01.dbf',
'/u01/oracle/obsdata/gmix01.dbf',
'/u01/oracle/obsdata/gmld01.dbf',
'/u01/oracle/obsdata/gmlx01.dbf',
'/u01/oracle/obsdata/gmpd01.dbf',
'/u01/oracle/obsdata/gmpx01.dbf',
'/u01/oracle/obsdata/gmsd01.dbf',
'/u01/oracle/obsdata/gmsx01.dbf',
'/u01/oracle/obsdata/grd01.dbf',
'/u01/oracle/obsdata/grx01.dbf',
'/u01/oracle/obsdata/hrd01.dbf',
'/u01/oracle/obsdata/hrx01.dbf',
'/u01/oracle/obsdata/hrid01.dbf',
'/u01/oracle/obsdata/hrix01.dbf',
'/u01/oracle/obsdata/hxcd01.dbf',
'/u01/oracle/obsdata/hxcx01.dbf',
'/u01/oracle/obsdata/hxtd01.dbf',
'/u01/oracle/obsdata/hxtx01.dbf',
'/u01/oracle/obsdata/ibad01.dbf',
'/u01/oracle/obsdata/ibax01.dbf',
'/u01/oracle/obsdata/ibed01.dbf',
'/u01/oracle/obsdata/ibex01.dbf',
'/u01/oracle/obsdata/ibpd01.dbf',
'/u01/oracle/obsdata/ibpx01.dbf',
'/u01/oracle/obsdata/ibud01.dbf',
'/u01/oracle/obsdata/ibux01.dbf',
'/u01/oracle/obsdata/ibyd01.dbf',
'/u01/oracle/obsdata/ibyx01.dbf',
'/u01/oracle/obsdata/icxd01.dbf',
'/u01/oracle/obsdata/icxx01.dbf',
'/u01/oracle/obsdata/iebd01.dbf',
'/u01/oracle/obsdata/iebx01.dbf',
'/u01/oracle/obsdata/iemd01.dbf',
'/u01/oracle/obsdata/iemx01.dbf',
'/u01/oracle/obsdata/ieod01.dbf',
'/u01/oracle/obsdata/ieox01.dbf',
'/u01/oracle/obsdata/iesd01.dbf',
'/u01/oracle/obsdata/iesx01.dbf',
'/u01/oracle/obsdata/ieud01.dbf',
'/u01/oracle/obsdata/ieux01.dbf',
'/u01/oracle/obsdata/iexd01.dbf',
'/u01/oracle/obsdata/iexx01.dbf',
'/u01/oracle/obsdata/igcd01.dbf',
'/u01/oracle/obsdata/igcx01.dbf',
'/u01/oracle/obsdata/igfd01.dbf',
'/u01/oracle/obsdata/igfx01.dbf',
'/u01/oracle/obsdata/igsd01.dbf',
'/u01/oracle/obsdata/igsx01.dbf',
'/u01/oracle/obsdata/igwd01.dbf',
'/u01/oracle/obsdata/igwx01.dbf',
'/u01/oracle/obsdata/invd01.dbf',
'/u01/oracle/obsdata/invx01.dbf',
'/u01/oracle/obsdata/ipad01.dbf',
'/u01/oracle/obsdata/ipax01.dbf',
'/u01/oracle/obsdata/iscd01.dbf',
'/u01/oracle/obsdata/iscx01.dbf',
'/u01/oracle/obsdata/jad01.dbf',
'/u01/oracle/obsdata/jax01.dbf',
'/u01/oracle/obsdata/jed01.dbf',
'/u01/oracle/obsdata/jex01.dbf',
'/u01/oracle/obsdata/jgd01.dbf',
'/u01/oracle/obsdata/jgx01.dbf',
'/u01/oracle/obsdata/jld01.dbf',
'/u01/oracle/obsdata/jlx01.dbf',
'/u01/oracle/obsdata/jtfd01.dbf',
'/u01/oracle/obsdata/jtfx01.dbf',
'/u01/oracle/obsdata/med01.dbf',
'/u01/oracle/obsdata/mex01.dbf',
'/u01/oracle/obsdata/mfgd01.dbf',
'/u01/oracle/obsdata/mfgx01.dbf',
'/u01/oracle/obsdata/mrpd01.dbf',
'/u01/oracle/obsdata/mrpx01.dbf',
'/u01/oracle/obsdata/mscd01.dbf',
'/u01/oracle/obsdata/mscx01.dbf',
'/u01/oracle/obsdata/msdd01.dbf',
'/u01/oracle/obsdata/msdx01.dbf',
'/u01/oracle/obsdata/msod01.dbf',
'/u01/oracle/obsdata/msox01.dbf',
'/u01/oracle/obsdata/mwad01.dbf',
'/u01/oracle/obsdata/mwax01.dbf',
'/u01/oracle/obsdata/oed01.dbf',
'/u01/oracle/obsdata/oex01.dbf',
'/u01/oracle/obsdata/okcd01.dbf',
'/u01/oracle/obsdata/okcx01.dbf',
'/u01/oracle/obsdata/oked01.dbf',
'/u01/oracle/obsdata/okex01.dbf',
'/u01/oracle/obsdata/oksd01.dbf',
'/u01/oracle/obsdata/oksx01.dbf',
'/u01/oracle/obsdata/okxd01.dbf',
'/u01/oracle/obsdata/okxx01.dbf',
'/u01/oracle/obsdata/ontd01.dbf',
'/u01/oracle/obsdata/ontx01.dbf',
'/u01/oracle/obsdata/opid01.dbf',
'/u01/oracle/obsdata/opix01.dbf',
'/u01/oracle/obsdata/osmd01.dbf',
'/u01/oracle/obsdata/osmx01.dbf',
'/u01/oracle/obsdata/otad01.dbf',
'/u01/oracle/obsdata/otax01.dbf',
'/u01/oracle/obsdata/ozfd01.dbf',
'/u01/oracle/obsdata/ozfx01.dbf',
'/u01/oracle/obsdata/ozpd01.dbf',
'/u01/oracle/obsdata/ozpx01.dbf',
'/u01/oracle/obsdata/ozsd01.dbf',
'/u01/oracle/obsdata/ozsx01.dbf',
'/u01/oracle/obsdata/pad01.dbf',
'/u01/oracle/obsdata/pax01.dbf',
'/u01/oracle/obsdata/pjmd01.dbf',
'/u01/oracle/obsdata/pjmx01.dbf',
'/u01/oracle/obsdata/pmid01.dbf',
'/u01/oracle/obsdata/pmix01.dbf',
'/u01/oracle/obsdata/pnd01.dbf',
'/u01/oracle/obsdata/pnx01.dbf',
'/u01/oracle/obsdata/pod01.dbf',
'/u01/oracle/obsdata/pox01.dbf',
'/u01/oracle/obsdata/poad01.dbf',
'/u01/oracle/obsdata/poax01.dbf',
'/u01/oracle/obsdata/pomd01.dbf',
'/u01/oracle/obsdata/pomx01.dbf',
'/u01/oracle/obsdata/psad01.dbf',
'/u01/oracle/obsdata/psax01.dbf',
'/u01/oracle/obsdata/psbd01.dbf',
'/u01/oracle/obsdata/psbx01.dbf',
'/u01/oracle/obsdata/pspd01.dbf',
'/u01/oracle/obsdata/pspx01.dbf',
'/u01/oracle/obsdata/qad01.dbf',
'/u01/oracle/obsdata/qax01.dbf',
'/u01/oracle/obsdata/qpd01.dbf',
'/u01/oracle/obsdata/qpx01.dbf',
'/u01/oracle/obsdata/rgd01.dbf',
'/u01/oracle/obsdata/rgx01.dbf',
'/u01/oracle/obsdata/rhxd01.dbf',
'/u01/oracle/obsdata/rhxx01.dbf',
'/u01/oracle/obsdata/rlad01.dbf',
'/u01/oracle/obsdata/rlax01.dbf',
'/u01/oracle/obsdata/rlmd01.dbf',
'/u01/oracle/obsdata/rlmx01.dbf',
'/u01/oracle/obsdata/sspd01.dbf',
'/u01/oracle/obsdata/sspx01.dbf',
'/u01/oracle/obsdata/vead01.dbf',
'/u01/oracle/obsdata/veax01.dbf',
'/u01/oracle/obsdata/vehd01.dbf',
'/u01/oracle/obsdata/vehx01.dbf',
'/u01/oracle/obsdata/wipd01.dbf',
'/u01/oracle/obsdata/wipx01.dbf',
'/u01/oracle/obsdata/wmsd01.dbf',
'/u01/oracle/obsdata/wmsx01.dbf',
'/u01/oracle/obsdata/wpsd01.dbf',
'/u01/oracle/obsdata/wpsx01.dbf',
'/u01/oracle/obsdata/wshd01.dbf',
'/u01/oracle/obsdata/wshx01.dbf',
'/u01/oracle/obsdata/wsmd01.dbf',
'/u01/oracle/obsdata/wsmx01.dbf',
'/u01/oracle/obsdata/xdpd01.dbf',
'/u01/oracle/obsdata/xdpx01.dbf',
'/u01/oracle/obsdata/xlad01.dbf',
'/u01/oracle/obsdata/xlax01.dbf',
'/u01/oracle/obsdata/xncd01.dbf',
'/u01/oracle/obsdata/xncx01.dbf',
'/u01/oracle/obsdata/xnmd01.dbf',
'/u01/oracle/obsdata/xnmx01.dbf',
'/u01/oracle/obsdata/xnpd01.dbf',
'/u01/oracle/obsdata/xnpx01.dbf',
'/u01/oracle/obsdata/xnsd01.dbf',
'/u01/oracle/obsdata/xnsx01.dbf',
'/u01/oracle/obsdata/xtrd01.dbf',
'/u01/oracle/obsdata/xtrx01.dbf',
'/u01/oracle/obsdata/applsysd02.dbf',
'/u01/oracle/obsdata/applsysx02.dbf',
'/u01/oracle/obsdata/asld01.dbf',
'/u01/oracle/obsdata/aslx01.dbf',
'/u01/oracle/obsdata/pvd01.dbf',
'/u01/oracle/obsdata/pvx01.dbf',
'/u01/oracle/obsdata/system06.dbf',
'/u01/oracle/obsdata/itgd01.dbf',
'/u01/oracle/obsdata/itgx01.dbf',
'/u01/oracle/obsdata/ipdd01.dbf',
'/u01/oracle/obsdata/ipdx01.dbf',
'/u01/oracle/obsdata/eamd01.dbf',
'/u01/oracle/obsdata/eamx01.dbf',
'/u01/oracle/obsdata/enid01.dbf',
'/u01/oracle/obsdata/enix01.dbf',
'/u01/oracle/obsdata/okrd01.dbf',
'/u01/oracle/obsdata/okrx01.dbf',
'/u01/oracle/obsdata/cued01.dbf',
'/u01/oracle/obsdata/cuex01.dbf',
'/u01/oracle/obsdata/fted01.dbf',
'/u01/oracle/obsdata/ftex01.dbf',
'/u01/oracle/obsdata/msrd01.dbf',
'/u01/oracle/obsdata/msrx01.dbf',
'/u01/oracle/obsdata/igid01.dbf',
'/u01/oracle/obsdata/igix01.dbf',
'/u01/oracle/obsdata/portal01.dbf',
'/u01/oracle/obsdata/ahld01.dbf',
'/u01/oracle/obsdata/ahlx01.dbf',
'/u01/oracle/obsdata/ahmd01.dbf',
'/u01/oracle/obsdata/ahmx01.dbf',
'/u01/oracle/obsdata/aspd01.dbf',
'/u01/oracle/obsdata/aspx01.dbf',
'/u01/oracle/obsdata/bivd01.dbf',
'/u01/oracle/obsdata/bivx01.dbf',
'/u01/oracle/obsdata/csed01.dbf',
'/u01/oracle/obsdata/csex01.dbf',
'/u01/oracle/obsdata/csid01.dbf',
'/u01/oracle/obsdata/csix01.dbf',
'/u01/oracle/obsdata/csld01.dbf',
'/u01/oracle/obsdata/cslx01.dbf',
'/u01/oracle/obsdata/cugd01.dbf',
'/u01/oracle/obsdata/cugx01.dbf',
'/u01/oracle/obsdata/iecd01.dbf',
'/u01/oracle/obsdata/iecx01.dbf',
'/u01/oracle/obsdata/imcd01.dbf',
'/u01/oracle/obsdata/imcx01.dbf',
'/u01/oracle/obsdata/imtd01.dbf',
'/u01/oracle/obsdata/imtx01.dbf',
'/u01/oracle/obsdata/jtmd01.dbf',
'/u01/oracle/obsdata/jtmx01.dbf',
'/u01/oracle/obsdata/jtsd01.dbf',
'/u01/oracle/obsdata/jtsx01.dbf',
'/u01/oracle/obsdata/okbd01.dbf',
'/u01/oracle/obsdata/okbx01.dbf',
'/u01/oracle/obsdata/okid01.dbf',
'/u01/oracle/obsdata/okix01.dbf',
'/u01/oracle/obsdata/okod01.dbf',
'/u01/oracle/obsdata/okox01.dbf',
'/u01/oracle/obsdata/posd01.dbf',
'/u01/oracle/obsdata/posx01.dbf',
'/u01/oracle/obsdata/xnid01.dbf',
'/u01/oracle/obsdata/xnix01.dbf',
'/u01/oracle/obsdata/system07.dbf',
'/u01/oracle/obsdata/system08.dbf',
'/u01/oracle/obsdata/system09.dbf',
'/u01/oracle/obsdata/rbs02.dbf',
'/u01/oracle/obsdata/amfd01.dbf',
'/u01/oracle/obsdata/amfx01.dbf',
'/u01/oracle/obsdata/bned01.dbf',
'/u01/oracle/obsdata/bnex01.dbf',
'/u01/oracle/obsdata/csmd01.dbf',
'/u01/oracle/obsdata/csmx01.dbf',
'/u01/oracle/obsdata/dddd01.dbf',
'/u01/oracle/obsdata/dddx01.dbf',
'/u01/oracle/obsdata/domd01.dbf',
'/u01/oracle/obsdata/domx01.dbf',
'/u01/oracle/obsdata/egod01.dbf',
'/u01/oracle/obsdata/egox01.dbf',
'/u01/oracle/obsdata/ibcd01.dbf',
'/u01/oracle/obsdata/ibcx01.dbf',
'/u01/oracle/obsdata/okld01.dbf',
'/u01/oracle/obsdata/oklx01.dbf',
'/u01/oracle/obsdata/pjid01.dbf',
'/u01/oracle/obsdata/pjix01.dbf',
'/u01/oracle/obsdata/pond01.dbf',
'/u01/oracle/obsdata/ponx01.dbf',
'/u01/oracle/obsdata/qotd01.dbf',
'/u01/oracle/obsdata/qotx01.dbf',
'/u01/oracle/obsdata/qrmd01.dbf',
'/u01/oracle/obsdata/qrmx01.dbf',
'/u01/oracle/obsdata/discoverer01.dbf',
'/u01/oracle/obsdata/cinvd01.dbf',
'/u01/oracle/obsdata/cinvx01.dbf',
'/u01/oracle/obsdata/cpod01.dbf',
'/u01/oracle/obsdata/cpox01.dbf',
'/u01/oracle/obsdata/capd01.dbf',
'/u01/oracle/obsdata/capx01.dbf',
'/u01/oracle/obsdata/card01.dbf',
'/u01/oracle/obsdata/carx01.dbf',
'/u01/oracle/obsdata/cqcd01.dbf',
'/u01/oracle/obsdata/cqcx01.dbf',
'/u01/oracle/obsdata/cfndd01.dbf',
'/u01/oracle/obsdata/cfndx01.dbf',
'/u01/oracle/obsdata/cgld01.dbf',
'/u01/oracle/obsdata/cglx01.dbf',
'/u01/oracle/obsdata/convd01.dbf',
'/u01/oracle/obsdata/applsysd03.dbf',
'/u01/oracle/obsdata/applsysx03.dbf',
'/u01/oracle/obsdata/cwpld01.dbf',
'/u01/oracle/obsdata/cwplx01.dbf',
'/u01/oracle/obsdata/csyd01.dbf',
'/u01/oracle/obsdata/csyx01.dbf',
'/u01/oracle/obsdata/cpod02.dbf',
'/u01/oracle/obsdata/csyd02.dbf'
CHARACTER SET UTF8
ALTER DATABASE OPEN RESETLOGS;
DROP tablespace TEMP;
DROP tablespace TEMPSYN;
CREATE temporary tablespace TEMP TEMPFILE '/u01/oracle/obsdata/temp01.dbf'
     SIZE 1048576000 REUSE extent management local uniform size 128K;
CREATE temporary tablespace TEMPSYN TEMPFILE '/u01/oracle/obsdata/tempsyn01.dbf'
     SIZE 1048576000 REUSE extent management local uniform size 128K;
Edited by: amychan60 on Jun 17, 2009 9:30 PM

ORA-02084: datbase name is missing a component

Similar Messages

Maybe you are looking for