SDK is missing GPL component

I am using Flash Builder 4.7 and today I upgraded to the AIR 3.6 SDK which I got from here:
http://www.adobe.com/devnet/air/air-sdk-download.html
And then replaced the existing AIR 3.5 SDK by following the instructions here:
http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder. html
My application (which is almost complete) runs fine in the AIR simulator but when I try to run it in debug mode on my iPhone I get this error:
Error occurred while packaging the application:
SDK is missing GPL component /Applications/Adobe Flash Builder 4.7/eclipse/plugins/com.adobe.flash.compiler_4.7.0.349722/AIRSDK/lib/ aot/bin/as/as-arm
What am I missing? I have worked hard core on this app over the last couple months and have installed and ran it many many times.
- Randy

I solved my own issue and it was caused by the confusing instructions here:
http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html
Firstly the link says overlay yet the instructions are for "update" which is consistent with the instructions because no overlay occurs. The user is instructed to delete all the contents in AIRSDK directory and run a command line that unpacks the new files in place. Then there are instructions to copy the contents of the AOT from the old folder over. This was where I made my mistake. I simply replaced this directory which replaced the contents and suddenly some key files were missing.
To fix this, I reinstalled the old AIRSDK directory and ran the command line which OVERLAID the new SDK files over the old ones which replaces the necessary files with upgraded ones and leaves the rest intact. Now my project compiles without error.
Adobe, this is a problem. I realize that "overlaying" in this manner is not clean and can leave garbage behind, but your instructions on this page are problematic. Can you please devise a cleaner, easier and less problematic way of updating the SDK that does not require the command line?
- Randy

Similar Messages

IOS Simulator build: SDK is missing GPL component X:\sdk_path\lib\aot/bin/as/as-386.exe

Trying to build a simulator build with air 16 or 17 and iPhoneSimulator8.2.sdk I get the following error:
SDK is missing GPL component X:\sdk_path\lib\aot/bin/as/as-386.exe
igmake: *** [../bin/project.ipa] Error 16
igmake: Leaving directory `X:/project/'
I've checked various sdk versions. Some of them have an "as-386" file, but never a "as-386.exe" file. I tried just renaming the file (hoping for the best) but that results in this error:
ld: in `)Ωtm♣Z, unsupported address encoding (08) of personality function in CIE
for architecture i386
Compilation failed while executing : ld64
igmake: *** [../bin/project.ipa] Error 12
Any help would be appreciated!
Ken

Thanks,
Yes I know that.
But what I was expecting was that things which worked in AIR 3.3 beta 3 would continue to work. As in this link http://blogs.adobe.com/airodynamics/2012/05/18/using-platformsdk-for-ios-on-windows/
In fact the Release notes that you point to state:
Platform SDK support for iOS on Windows
Now, a developer can copy the iOS SDK folder on a Windows® machine and use the platformsdk option of adt on Windows® too.
adt –package –target (ipa-app-store|ipa-ad-hoc|ipa-debug|ipa-debug-interpreter|ipa-test|ipa-test-interpreter) -platformsdk
This feature is not yet available in Flash Builder. The SDK should be copied properly, i.e. the symbolic links in the iOS SDK should be converted to actual files on Windows® , else, packaging will fail.
C

SDK is missing GPL component lib\aot/bin/as/i686-apple-darwin9-as.exe

Hi,
Just downloaded AIR 3.3 release SDK, tried to package and I get this problem - the file 'i686-apple-darwin9-as.exe' is missing by the looks of it.
The command I use is this
adt.bat -package -target ipa-debug-interpreter-simulator -connect 192.168.1.9 -storetype pkcs12 -keystore xxx.p12 -storepass xxx test.ipa test-app.xml text.swf -platformsdk C:\iPhoneSimulator5.1.sdk
running on Windows, with the iPhone SDK copied from the Mac.
The thing is, this worked fine in the AIR 3.3 beta 3 SDK.
Anyone any ideas ??
C

Thanks,
Yes I know that.
But what I was expecting was that things which worked in AIR 3.3 beta 3 would continue to work. As in this link http://blogs.adobe.com/airodynamics/2012/05/18/using-platformsdk-for-ios-on-windows/
In fact the Release notes that you point to state:
Platform SDK support for iOS on Windows
Now, a developer can copy the iOS SDK folder on a Windows® machine and use the platformsdk option of adt on Windows® too.
adt –package –target (ipa-app-store|ipa-ad-hoc|ipa-debug|ipa-debug-interpreter|ipa-test|ipa-test-interpreter) -platformsdk
This feature is not yet available in Flash Builder. The SDK should be copied properly, i.e. the symbolic links in the iOS SDK should be converted to actual files on Windows® , else, packaging will fail.
C

[svn] 3403: Fix for SDK-17097 - Missing summary description of a class in package classes table

Revision: 3403
Author: [email protected]
Date: 2008-09-29 12:36:37 -0700 (Mon, 29 Sep 2008)
Log Message:
Fix for SDK-17097 - Missing summary description of a class in package classes table
QA: Yes
Doc:
Tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17097
Modified Paths:
flex/sdk/trunk/asdoc/templates/class-files.xslt

Well, it's kind of logical that as you put more jar files (classes) in Tomcat, it changes the error to ask for the classes (inside a jar) it cannot find.
There was a good class->jar finder on the internet some years ago, but i don't remember the address. Try looking for that and search all the missing classes (NotDefined) and their correspondig jar files.
Good Luck!

Ora-02084 : database name is missing a component

hai all,
i am a newbee to oracle. i am struggling to create a database, any help would be highly appreciated. i have installed Oracle 9i on a RH8.0 system. but while creating database through DBCA, i am getting the error message, "ORA -02084:Oracle database name is missing a component". i ahve gone through the documentation and found that probelm is with ORACLE_SID. i have set all the environment variables(including ORACLE_SID, DB_NAME AND DB_DOMAIN) according to the documentaion and created swap files, temporary space etc.i have set all the environment variables in .bash_profile in ORACLE_HOME.
i have stopped DBCA and gone through the files. i could see that the database is actually created, with initXXX.ora.441414312 file. but once when i started the database with nomount and checked, i could find the control files missing.
thanks in advance,
ramesh.

Probably you are missing value for db_name (or missing parameter db_name) in parameter file.
Note you can still create db manualy (without DBCA).

ORA-02084: datbase name is missing a component

Hello,
I am attemtping to configure OMS using EMCA on Windows XP. I get the following errors:
ORA-02084: datbase name is missing a component
Creating local database with SID "OEMREP"...
C:\oracle\ora92\bin\launch.exe C:\oracle\ora92\assistants\dbca dbca.cl -progress_only -emca_internal -createDatabase -templateName Transaction_Processing.dbc -gdbName OEMREP.hsd1.va.comcast.net. -sid OEMREP
Failed to create local database.Processing failed.
Question is what component is the database missing and how do I resolve it?
Thanks.

Try this one:
CREATE DATABASE LINK "SYNO.DELTEMIPPM.HUTCH.IN" connect to
STRMADMIN identified by STRMADMIN using 'SYNO.DELTEMIPPM.HUTCH.IN';
and then check whether the delink is working by the below mentioned command:
select * from tab@"SYNO.DELTEMIPPM.HUTCH.IN";
Regards,
Abhirup.
Kolkata, India.

Database name is missing a component....

I'm doing a 3 server install on Windows 2000 Professional.
While installing the infrastructure, while it tries to create the database I get the warning "database name is missing a component". I'm never asked to enter a database name, so I'm not sure where I'm going wrong.
The infrastructure hostname is "in", it's in workgroup "workgroup", and the fully qualified hostname is "in.sdia.com". It's IP address is 192.168.45.10. In the hosts file I added the following line after the default localhost entry:
192.168.45.10 in.sdia.com in
In the infrastructure install my instance name is "instance1".
I can finish the infrastructure install (and it reports it as successful), but I then get the same error doing the information store install, after which it fails on the database creation.
Any ideas?

How do you double quote the db name in a single box installation on Windows ? In a single box inst, you do not get the chance to specify the name that is causing the trouble, namely iasd.domainname.in.something. On windows, I tried manually running the same command that, according to logs, was failing, but could not get this to work. I tried all alternatives I could think of (-gdbname iasdb.aaa.in.xxxx.fi / "iasdb.aaa.in.xxxx.fi" / 'iasdb.aaa.in.xxxx.fi' / ""iasdb.aaa.in.xxxx.fi"" / '"iasdb.aaa.in.xxxx.fi"' / "'iasdb.aaa.in.xxxx.fi'") but none of them works. Some quickly spit out an error about an error in the name, while some fail only later with ORA-02084. What should I do ?

IOS improved packaging SDK is missing compile-abc.exe error

I am trying to test out the new and improved iOS packaging on my Windows machine and I am having some trouble getting it to work. I am using AIR 4.0.1170 for Flex developers and as the announcement says, added "-useLegacyAOT no" to my packaging options in FB. I believe it is in the correct spot because moving it to other places in the packaging options gives me syntax errors and when I do "-useLegacyAOT yes", it packages just fine, but takes a really long time. I keep getting the following error:
SDK is missing file C:\{my 4.0 sdk path}/lib/aot/bin/compile-abc/compile-abc.exe
Sure enough, navigating to that path shows compile-abc does not exist. Any ideas of what I may be doing wrong?

We are aware of the issue and investigating it.As if now,-useLegacyAOT switch is not working on windows.For more information please see this:
http://labsdownload.adobe.com/pub/labs/flashruntimes/shared/air4-0_flashplayer12-0_release notes.pdf
Thanks,
Sakshi
Adobe AIR Team

Im missing a component. these number pop up -45019

im missing a component. these number pop up -45019

The general approach at this time is to ask if you've checked for any problematic fonts (all languages) with Apple's Font Book (look in the Applications folder). Find and remove all duplicates also.
Start there to be sure all fonts that are in play come out with a clean bill of health.
Don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come from Office 2008, including those related to an Equation Editor installation.
By all means be sure any 3rd party apps are Snow Leopard compatible.
Good luck in any case.

Hpqdirec.exe has stopped working; "This program requires a missing Windows component"

Anytime I try to access the HP solution center I get a message pop-up. It is from Windows & says: "This program requires a missing Windows component. " "This program requires flash.ocx, which is no longer included in this version of Windows." How do i fix this????

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are facing issues with regards to one of the Windows component which is missing
We will surely assist you with this issue
Please click on the below shown link to find the steps involved in resolving the issue
http://tinyurl.com/khb65xv
You can Check your warranty Here to verify the status if required
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

I cannot see the Vidoe displayed on the screen, only hear the sound. I am missing a component? Compressor, etc. I just downloaded the latest version of Quicktime for Microsoft, please help.

I am not able to view my video taken with a memory card only the sound? I am missing a component? Compressor, etc. I just downloaded the latest version of Quicktime for Microsoft, please help
I can see it on Windows Media? Need help on this.

It says SEDG 720X480 2:1 Mono. Video came from Sd memory card taken with a Samsung Video Camera.
Strangely enough, as a FourCC, SEDG is defined as "MPEG-4 hardware and software codec used in Samsung digital video products." Not a Windows or Samsung camcorder user but THIS WEB PAGE may be of some assistance.
Also I will need to view a CD recorded by the same camera (DVD-RW) file extensions are VIDEO_RM.BUP
VIDEO_TS.IFO, VIDEO_TS.VOB, SAMSUNG.IFO So far these files don't open even with Windows Media.
I don't know what to do to be able to open up these files save them on my Hard drive and then be able to upload them to YouTube. Any Ideas?
IFO files tell how the video content is segmented and where the video data is located. BUP files contain back-up IFO information. VOB files contain actual multipled audio/video data. A DVD formatted to play in a commercial DVD player normally contains a series of files named "VTS##_#.VOB" where ## refers to the "title" series and "_#" (where # is not a zero) refers to the order in which the video title file data is played.
Again, I am neither a Windows user nor an athority on Samsung VIDEO_RM folder structures. However, if your disc contains both a VIDEO_RM and VIDEO_TS folder, then I would normally assume the VIDEO_RM folder is present for legacy purposes and/or to provide information about the refording device while the VIDEO_TS folder actually contains the video object (VOB) file data. In any case, as I am not familiar with what software is available for muxed MPEG-2/AC3 editing/conversion on a Windows platform, I would try viewing the VOB files in an application like MPEG Streamclip (free). If you can play the Audio and video content (be sure to read the MPEG Streamclip requirements regarding codec installation), then you can edit (merge and/or trim) the raw data and convert it to a format compatible for YouTube uploading. (I.e., MPEG Streamclip is commonly used on the Mac for this type of work flow and the app is also available for Windows use.)

HT2404 when accessing itunes get message saying i am missing a component and cannot buy frim store because of this. what does this mean please.

when accessing itunes message comes up saying i am missing a component. cannot download anything from itunes store cos same message comes up. what is this and can i rectify it. thank you.

What version of Mac OS X do you use, and what version is iTunes?

[svn] 3402: Fix for SDK-17089 - @ Copy in component level comments put copied text first

Revision: 3402
Author: [email protected]
Date: 2008-09-29 11:10:24 -0700 (Mon, 29 Sep 2008)
Log Message:
Fix for SDK-17089 - @Copy in component level comments put copied text first
QA: Yes
Doc:
Tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17089
Modified Paths:
flex/sdk/trunk/asdoc/templates/fieldSummary.xslt
flex/sdk/trunk/asdoc/templates/methodSummary.xslt

Walter Laan wrote:
almightywiz wrote:
Walter Laan wrote:
The security popup really messes with the focus in Firefox (3.6.16) though.Not saying you're wrong, but I'm using FireFox 3.6.16, as well, and I have none of the focus troubles you've described.Cannot reproduce it now either. Weird.I got the impression you were referring to keyboard focus, so I did some further tests on focus behavior. The test results are listed in the Accumulated Results table on the 1st post.
The only browser so far that works as I'd expect, or at least as I'd like, is IE.
Applets and keyboard navigation have always been a PITA. Some time ago I vaguely recall seeing an update involving a new parameter to regulate initial focus (applet or page, ..or another applet), but for the life of me I cannot locate it now. Given that it was a parameter for initial focus, I doubt it would help in this case.
Edited by: Andrew Thompson on Mar 26, 2011 6:18 PM
Removed table which has now been expanded & added to 1st post.

Missing installer component NI-VISA Runtime

We use the LabWindows/CVI 2010 Version 10.0.0 (360) and have installed the new runtime from the installer package 5.0.3.31.
With different projects on different computers we have the same problem: The NI-VISA runtime can not be included in the installation package. With older projects which have been already distributed we get the error message when opening the tab "Drivers & Components" and click on the red entry for the visa runtime: "This component is not installed on this system, and cannot be included in distributions built on this machine". Reinstallation of the NI-VISA runtime does not help. The installation is visible in the MDF File and the registry (distributions and products). With a new project the entry NI-VISA runtime does not appear on the "Drivers & Comnponents" tab.
What went wrong? We are not able to create any distribution at this moment.
Solved!
Go to Solution.
Attachments:
ScreenInstallerError.jpg ‏334 KB

The items shown in the Drivers & Components tab are enumerated from the contents of the <program files>\National Instruments\Shared\MDF\Manifests directory. If you have NI-VISA 5.0.3 installed, you should have a file in that directory named 'NI-VISA Runtime 5.0.3 {85BA3FCF-AA00-4151-B97D-84A221E8198A}.xml'. From your experience, I would guess that maybe this file is somehow missing. That would be especially strange, given that you have uninstalled and reinstalled, but it seems to be the most logical explanation. I am attaching a zipped copy of that file here as a replacement, in case you are missing it. If you already have the file, or replacing it does not solve your problem, it will be handy to look at the debug build log. You should attempt to build the distribution, then after it prompts you and you abort, look for the file <user temp dir>\distBuildDbg.log and post it in your reply.
Mert A.
National Instruments
Attachments:
NI-VISA Runtime 5.0.3 {85BA3FCF-AA00-4151-B97D-84A221E8198A}.zip ‏5 KB

Upgraded SDK, classes missing, now what?

I have Flex Builder 3 with a professional liscense. FB3 includes classes like AdvancedDataGrid, AdvancedDataGridColumn, etc, that have a watermark over them until you enter the license, which then also unzips the files so you can see the source code.
I just updated the SDK from 3.2 to the 118MB "Adobe Flex SDK" version 3.4.0.6955 found at http://opensource.adobe.com/wiki/display/flexsdk/Download+Flex+3 .
So I unzipped it into its own folder in ../sdks/ , and switched to it in in Flex Builder. Now, I get the following errors in the "Problems" tab:
Description    Resource    Path    Location    Type
1017: The definition of base class AdvancedDataGrid was not found.    ADGridExtended.as    Eclient_moderator_calendar/[source path] src/com/ricca    line 13    Flex Problem
1017: The definition of base class AdvancedDataGrid was not found.    ADGridExtended.as    Eclient_study_quota/[source path] src/com/ricca    line 13    Flex Problem
1017: The definition of base class AdvancedDataGrid was not found.    ADGridExtended.as    Eclient_study_terminates_prototype/[source path] src/com/ricca    line 13    Flex Problem
Could not resolve <mx:AdvancedDataGridColumn> to a component implementation.    RemoveModeratorWindow.mxml    Eclient_moderator_calendar/src/commonElements/popupWindowElements    line 536    Flex Problem
Could not resolve <mx:AdvancedDataGridColumn> to a component implementation.    RemoveModeratorWindow.mxml    Eclient_moderator_calendar/src/commonElements/popupWindowElements    line 537    Flex Problem
Could not resolve <mx:AdvancedDataGridColumn> to a component implementation.    RemoveModeratorWindow.mxml    Eclient_moderator_calendar/src/commonElements/popupWindowElements    line 538    Flex Problem
Could not resolve <mx:AdvancedDataGridColumn> to a component implementation.    RemoveModeratorWindow.mxml    Eclient_moderator_calendar/src/commonElements/popupWindowElements    line 539    Flex Problem
Could not resolve <mx:AdvancedDataGridColumn> to a component implementation.    quota_report_panel_group.mxml    Eclient_study_quota/src    line 29    Flex Problem
Could not resolve <mx:AdvancedDataGridColumn> to a component implementation.    quota_report_panel_group.mxml    Eclient_study_quota/src    line 30    Flex Problem
Could not resolve <mx:AdvancedDataGridColumn> to a component implementation.    quota_report_panel_group.mxml    Eclient_study_quota/src    line 31    Flex Problem
Could not resolve <mx:AdvancedDataGridColumn> to a component implementation.    quota_report_panel_group.mxml    Eclient_study_quota/src    line 32    Flex Problem
Could not resolve <mx:AdvancedDataGridColumn> to a component implementation.    quota_report_panel_group.mxml    Eclient_study_quota/src    line 33    Flex Problem
Could not resolve <mx:AdvancedDataGridColumn> to a component implementation.    quota_report_panel_group.mxml    Eclient_study_quota/src    line 34    Flex Problem
Could not resolve <mx:AdvancedDataGridColumn> to a component implementation.    terminates_report_panel.mxml    Eclient_study_terminates_prototype/src    line 20    Flex Problem
Could not resolve <mx:AdvancedDataGridRendererProvider> to a component implementation.    RemoveModeratorWindow.mxml    Eclient_moderator_calendar/src/commonElements/popupWindowElements    line 543    Flex Problem
Could not resolve <mx:AdvancedDataGridRendererProvider> to a component implementation.    RemoveModeratorWindow.mxml    Eclient_moderator_calendar/src/commonElements/popupWindowElements    line 544    Flex Problem
Could not resolve <mx:AdvancedDataGridRendererProvider> to a component implementation.    terminates_report_panel.mxml    Eclient_study_terminates_prototype/src    line 24    Flex Problem
Could not resolve <mx:GroupingCollection> to a component implementation.    quota_report_panel_group.mxml    Eclient_study_quota/src    line 20    Flex Problem
Could not resolve <mx:GroupingField> to a component implementation.    quota_report_panel_group.mxml    Eclient_study_quota/src    line 23    Flex Problem
Could not resolve <mx:HierarchicalData> to a component implementation.    terminates_report_panel.mxml    Eclient_study_terminates_prototype/src    line 16    Flex Problem
Any ideas how to get those classes back?

Yozef0,
where can I find datavisualization_SDK3.5.zip?
Thank you in advance!
OK. I found the zip file.

SDK is missing GPL component

Similar Messages

Maybe you are looking for