ORA-03135 (lost connection) after collector start

After installing either AV 10.2.2.0 or 10.3.0 and associated agent of same version, collectors die. Excerpt from DBAUD_Collector log file:
INFO @ '25/07/2008 16:41:37 -5:00':
***** Recovery done OK
INFO @ '25/07/2008 16:41:37 -5:00':
***** Initialization done OK
INFO @ '25/07/2008 16:41:37 -5:00':
***** Starting CB
ERROR @ '25/07/2008 16:41:37 -5:00':
ORA-03135: connection lost contact

Problem solved!
1. Stop db and rename
C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
to
C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\OLD_SPFILEXE.ORA
2. Start db.
3. sqlplus "/ as sysdba"
4. In sqlplus:
startup pfile='C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\init.ora';
This brings up the database.
5. In sqlplus:
create spfile from pfile='C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\init.ora';
This creates 'C:\oraclexe\app\oracle\product\10.2.0\server\database\SPFILEXE.ORA'
6. Stop db, move SPFILEXE.ORA to C:\oraclexe\app\oracle\product\10.2.0\server\dbs
7. Start db. Now it is working.
Thoughts:
1. I probably don't have to do 4. And I can combine 5 and 6 and generate SPFILEXE.ORA from init.ora in one step by specifying the destination.
2. In C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts there is a initXETemp.ora which is very similar to init.ora. You may use it to recover as well.
Thanks everyone!
xmk

Similar Messages

TS4036 Trying to restore, I've tried a dozen networks and I keep getting a "lost connection" after an hour or two, EVERYTIME. Using Cox Wi-fi with a net gear 300 router. Any suggestions?

Trying to restore, I've tried a dozen networks and I keep getting a "lost connection" after an hour or two, EVERYTIME. Using Cox Wi-fi with a netgear 300 router. Any suggestions?

Thanks, helped me figure out a bigger problem there was with my router's access control and all kinds of crazy numbers that needed to be changed, but I got it.
Problem is fixed as far as I can tell!

ORA-03135 on connect

When I am attempting to connect to a remote 9i DB from a UNIX host with a 10.2 UNIX client, I get a ORA-03135 if I uses a particular general users credentials. However is I connect with system account or even another non privileged I can connect without an error. Does anyone have an idea of what is causing this?
Thanks,
Tom

There is a password file...and I am able to log in with the system account and another non-dba account, but when I try the account that is necessary to perform a data migration, I get the "ORA-03135: Connection Lost Contact."

Time Machine lost connection after Lion update

Wanted to see if anyone lost the time machine connection after the latest 10.7.1 update released yesterday? My system couldnt find the drive for it and I had to re-set my time machine and then I could connect.

Some more info might help one of us with possible steps to resolve your problem. Is the external drive firewire, usb or network through airport, port-powered, etc?
What basic troubleshooting did you try?
Does it show up in System profiler? If it does there may not be too serious a problem.
While there are some who've had problems with the latest updates many of us have had no problems but we do empathise with those who have.
Neville

Wreg54g lost connection after router restart

Hi everibody! i need your help if anybody can help me...Recently somebody helped me and installed my Wreg54g.after some time, i had to restart my router so i can connect my phone(it had to be directly to the router..so i had to restart it). after this operation, my range expander lost connection.one light blue, one red..so i pressed that button auto configuration, both lights turned blue, but still i don't have full signal on my comp.what did i do wrong, how can i fix it?
Solved!
Go to Solution.

I believe the settings on the range extender had been messed up so much that you press the AUTO Configuration button when you tried to reconnect though that is understandable. What I suggest is you make sure that the wireless internet is working okay through the router then on the WRE54G, configure the wireless settings again manually (without running the set up CD) the same with the router's. Check on the articles below to guide you in setting up the extender manually. By the way, reset first the extender before doing the reconfiguration.
Setting up the range expander without the installation CD
http://homekb.cisco.com/Cisco2/ukp.aspx?vw=1&docid=4d0870bf247a47e5b49b945a7a1ff515_Setting_up_the_R...
Additional References:
http://homekb.cisco.com/Cisco2/ukp.aspx?vw=1&docid=a3f6ea1b147844c090f7227d504ddbc1_.xml&pid=80&resp...
http://homekb.cisco.com/Cisco2/ukp.aspx?vw=1&docid=3723920ab5ec46f0a6d6a4f831e55b06_1488.xml&pid=80&...

Lost connection after wake up (T410)

Hello,
I have a permanent problem with losing WiFi connection after wake up (from hibernation and suspend). The access connection manager looses connection and cannot connect automatically (although the setting is set so). I have to connect manually every time and mostly even three times before it finally connects. The manager says either "driver was disconnected" or "operation was cancelled".
Is there any workaround, please? It's horrible to wait minute or two before I can use WiFi after the full wake up. In linux everything works fine
Teddy

hey teddy_the_bear,
curious to know, when your unit was a mono-boot; did it have the same problem or did the problem start after installing linux ?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Lost Connection after Update

Hi,
on one of our servers, a mac mini I started remotely a software Update. It was 10.68 Server.
After that I could connect, but I saw thet all users were entitled for remote management.
So I deleted the users, but left me in. Later I was not able to connect anymore.
First it said ARD not active. So I learned my way to kickstart (I have SSH enabled), but everything failed.
Alo when I want to add the computer, the password and name is failing, but I´m able to connect with this name and password trough terminal.
I think the mini is on his login screen. I tried also to reboot, but no change.
Should a manual restart from some staff in the datacenter should do more then a reboot?
Maybe I have to drive all the way to the datacenter
Any tipps
Norbert

with "ARD_AllLocalUsers" = 0; only authorized users can connect, instead of all users. If the account your trying to connect with, is not on the list, and or doesn't have the right allowed access, This could explain why your not able to connect.
Have you tried the command:
zdactivate -configure -access -on -restart -agent -privs -all
Or Alternatively:
sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -activate -deactivate
sudo defaults write /Library/Preferences/com.apple.RemoteManagement "ARD_AllLocalUsers" -integer 1
sudo defaults write /Library/Preferences/com.apple.RemoteManagement "ARD_AllLocalUsersPrivs" -integer 1073742079
sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -activate -activate

Lost connection after restart -- Please Help

Bought 5th gen ipod week ago. Don't use my home computer much:
- iBook G3
- OS X 10.2.8
- iTunes 3
Updated my software, connected the ipod and immediately starting syncing and listening to music. Imported 20 CDs...all good.
Today, computer froze when I tried to eject the ipod. I restarted the computer and when I came back to it, everything is erased from my ipod. Everything still on itunes. Started to Update everything back to the ipod and realized that the ipod was not showing up in my itunes library.
Done the 5 R's, except I can't install the most recent version of itunes because I'm not on OSX 10.3 or above.
Please tell me there's a way to fix this without having to purchase new operating system software.
Thanks to anyone who will respond.

And which iPhoto version did you use before this happened?
If you upgraded from iPhoto 7.1.2 or earlier, you need to run the iPhoto Library Upgrader. Restore your iPhoto lIbrary from your backup to the state before the upgrade, then download, install, and run the upgrader, use this link iPhoto '11: About the Library Upgrader
If you upgraded from a newer iPhoto version, see this discussion:
Re: It appears my iPhoto Library is corrupt after upgrade ...
Are you seeing a folder "Old Masters", when you are ctrl-clicking your iPhoto Library and using "How Package Contents"?
Also see this discussion: Re: Yosemite, iPhoto 9.6 upgrade, large photo library is not recognised.

Lost connection after adjusting SGA and PGA

I lowered SGA from 170M to 50M, and PGA from 60M to 10M. Now I can not connect to XE using apex. Toad also reports ora-12514. I rebooted the pc and also manually cycled the db. But nothing works. In Service the oracle servies appear to be fine.
Thanks for any help.
I didn't register to the private forum for XE. So I post my question here. Hope people are not offended.
xmk

Problem solved!
1. Stop db and rename
C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
to
C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\OLD_SPFILEXE.ORA
2. Start db.
3. sqlplus "/ as sysdba"
4. In sqlplus:
startup pfile='C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\init.ora';
This brings up the database.
5. In sqlplus:
create spfile from pfile='C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\init.ora';
This creates 'C:\oraclexe\app\oracle\product\10.2.0\server\database\SPFILEXE.ORA'
6. Stop db, move SPFILEXE.ORA to C:\oraclexe\app\oracle\product\10.2.0\server\dbs
7. Start db. Now it is working.
Thoughts:
1. I probably don't have to do 4. And I can combine 5 and 6 and generate SPFILEXE.ORA from init.ora in one step by specifying the destination.
2. In C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts there is a initXETemp.ora which is very similar to init.ora. You may use it to recover as well.
Thanks everyone!
xmk

I join the ranks of those with lost connectivity after 4.2...

I too can join the ranks of those who have upgraded to iOS 4.2 and having issues. My 64GB 3G iPad now has WiFi only connection. Shows "No Service" for 3G.
I called Apple's tech folks who, predictably, blamed the SIM card being lose or out of place. Of course this only became a problem after having upgraded (really downgraded??) to 4.2. They have no solution otherwise.
When will Apple release products/software that "just work??" Asking to much there Mr. Jobs?? Recall that pesky iPhone 4 signal strength issue?? It's still fresh in folks minds and this will exacerbate the problem more.

After any reboot, my iPad 3G always "loses" 3G connectivity, can't find the SIM, and doesn't know the cellular data phone #. Every time. While your problem might be related to 4.2, before you conclude that for sure, try the following:
1. Reboot the iPad
2. Turn OFF Wi-Fi
3. Turn ON Cellular Data (even though Settings->General->About and/or Settings->Cellular Data->View Account said it couldn't connect or find the 3G stuff)
4. Wait a few seconds to see if you get the AT&T signal strength bars then bring up Safari to force a data transfer
You should be up. (Unless you really are having 4.2 problems). This problem happens to me all the time, and I haven't (yet) made the 4.2 upgrade. But (for me, so far) this sequence of actions forces the iPad to "rediscover" the information on the AT&T SIM card. Works every time.

Lost connection when neighbors start WiFi router

Am going crazy with this:
I am in the suburbs and was the only person with WiFi nearby. Recently 2 other people got WiFi as well, and it seems that when they start their WiFi routers, I lose my connection.
My setup: 10.4.7/PowerBook 17"/Airport Express.
I can be working, and then suddenly lose connection. I go to the AirPort menu, and suddenly see one or 2 other networks, but mine is gone. The attempts then can take up to 30 minutes to resolve (apparently thru voodoo) but my feeling is that when they go offline and switch off, I can get back online!
Not good! I have Interference Robustness selected, but am at a loss what to do...
Anyone with any ideas?
Thanks
Peter

Hi,
Try to change the channel of your wireless router. If you have the option with your router; preferably set the channel to "automatic".
If you are in the case that you can no longer connect to your router wirelessly, use an ethernet cable to be able to access to router and change the channel.
hope this help,

MBP shut off by itself, cannot connect after re-start

Hi All,
I'm writing because I know some wonderful person out there, will help this badgered father get his daughter back on line. Earlier this afternoon, my daughters MBP13 shut off all by itself (battery was fully charged). She was not able to get it restarted for 20 minutes. Finally upon re-start, all of the normal settings were missing. Such as the date and the time. It was re-set to 2008. Since then, she has not been able to get on to our home wireless network. The others (1 iMac and 1 MBP) are all fine. I did not have an appointment, but I went to the local Genius Bar. They were too busy to help me, but allowed me to start the MBP and checked it quickly on the stores' network. It found the network and signed on fine, so I know it's not a hardware related issue. I've gone through all of the diagnostics and help screens and cannot get it back on line. I've also re-started my Verizon FIOS router three times, but all without any luck. Can anyone help me get this back on line and peace back into my home?
cheers,
Jack

Try this: Shut down your computer, take out the battery and power cord and pres the power button for about 10 seconds. After that, reseat the battery (and power cord if necessary) and turn on the computer whilst holding down Command-Option-P-R. Wait until you hear the startup chime AT LEAST once after the initial chime. What you just did is a reset of SMC and pram.
After that calibrate the battery by fully charging it, use the computer on power supply for at least 2 hours. Then unplug it and use it off battery power until it completely runs down. Let it stand for at least 5 hours and plug it back in.
Hope this helps

Aironet 1140 AP - Lost connection after updating duplex

I change the duplex from Auto/Auto to Full/1000 via the attached screenshot setting in the web access console. Now the AP will not respond and allow items to connect to the AP. I can no longer access it via the URL or ping it. Any ideas on how to get it back?

You will need to console into the AP change the settings back. Make sure you leave speed and duplex to auto/auto.

Lost connection after power up my iMac (2011)

Every time i shut down my new iMac an power it on again i must connect time capsule again. The Internet connection is also down in that case.

Most likely, one of these:
com.vmware.kext.vmioplug        0053.60.16
com.vmware.kext.vsockets        90.1.3
com.vmware.kext.vmci    90.1.1
com.vmware.kext.vmx86   0053.60.16
See
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

Lost connection after sleep

I installed safari 4 yesterday. But when i put my laptop to sleep, I lose my network connection when I wake my computer up. I need to restart the system, than everything is working fine again. I'm working with XP. With my mac I don't have this problem.

Have her open System Preferences>Network and click on the PPPoE tab then the PPPoE Options button. Is "Connect automatically when needed" check marked and the other three under "Session Options" unchecked?
John

ORA-03135 (lost connection) after collector start

Similar Messages

Maybe you are looking for