ORA-12560 & imp\exp commands

When typing imp and supplying the login system along with my password I got the ORA-12560 error. After reading about the problem on the forums and the internet, I found that setting the sid with the command "set ORACLE_SID=" solved the issue. The problem is I would like not to have to do this every time I start Oracle after starting up my OS ( I have all the oracle services set to manual startup ). How can this be done ?
cheers

It seems you are on Windows. Set ORACLE_SID as environment variable (Control Panel ==> System ==> Advanced ==> Environment Variables). That works fine as long as you have only one database on your machine. You could also create a .bat file, which sets ORACLE_SID and starts service and database.
Werner

Similar Messages

Imp exp commands

Hello!
I am a newbie in dataguard.
Til now the only backup procedure for the data was accomplished using the exp command on specific schemas.
Now we want to create a data guard environment but we want to continue using exp on the primary and imp on another server(not the standby).
Do the new configurations for data guard effect the exp procedure, I mean can we continue using exp on the primary as before without any problem?
Thanks in advance!

Uwe has made me think about more.
If you are asking will IMP/EXP still work then yes is the correct answer.
However since you state "only backup procedure" I went with the RMAN answer.
Also I assume you are speaking about the Primary database only.
Best Regards
mseberg

Imp/exp command on linux

hi guys,
can someone please give me the complete steps on how to use the imp/exp utility for 8.1.7db runing on linux?
also if possible what are the requirements and steps to install db 8.1.7 on linux?
would really appreciate it,.....thanks in advance....

http://download-west.oracle.com/docs/cd/A87860_01/doc/server.817/a76955/toc.htm
http://www.oracle.com/pls/tahiti/tahiti.docindex
http://www.google.com/search?hl=en&q=installation+8i+linux&btnG=Search+v+Google&meta=

ORA-12560 on Exp

Hi all i try to launch an export command from my PC(I can't from server from some reason).
I have a Windows XP Notebook
I launch this command
exp user/password
and i get an ORACLE 12560 error
I check
1 - before launch exp i do set oracle_sid = mySid
2 - CON01 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = w01)(PORT = 1521))
(CONNECT_DATA =
(SID = mySid)
(SERVER = DEDICATED)
3 - ORACLE_HOME = D:\oracle\product\10.2.0
4 - i check for oracle services but i dont't find it but i think is because is a client.
Any idea?

Export data from a 9i database requires a 9i (or lower version) export utility, yes, that's better.
Did you use exp or expdp ?
Anyway, try to find a 9i client onsite, or download it, install and play around.
Nicolas.
Edited by: N. Gasparotto on Jul 15, 2009 11:43 AM

Imp and Exp Command

Hi,
Pls explain me the concept of Imp/Exp command and the parameters assocoiated with it?If u can tell me online practicals for Import/Export command?
Regards
sudhir

At 8:03, you "wanna learn" about tablespaces and datafiles.
At 8:11 you want the concept of Imp/Exp explained to you.
At 8:10 you "wanna learn" the concept of Roll Back Segmenst [sic]
And at 8:12 you "wanna learn" all about SQL*Loader
Not bad for nine minutes of complete thoughtlessness, I suppose.
If you "wanna learn" all about Oracle, download the software, install it, start playing with it, and come back with some serious questions that show a modicum of thought, effort, persistence and care. Paying some attention to the usual rules of grammar and spelling might be an idea, too.
You'll find installations documented at http://www.dizwell.com/prod/node/695#installation, and then you can work your way through some concepts at http://www.dizwell.com/prod/node/263 and then you can start doing some basic fiddling at http://www.dizwell.com/prod/node/695#basics and once you've worked your way through that lot, you should be in a position to make sensible use of the stuff over at http://tahiti.oracle.com.
And after you've had a good read of the official Concepts book there, then you can come back here to ask specific questions and reasonably expect to get meaningful replies.

Imp/exp ORA-12899: value too large for column

imp/exp ORA-12899: value too large for column
source :
os: linux as 4 update4
.bash_profile NLS_LANG=AMERICAN_AMERICA.US7ASCII
for run exp bill/admin001 file=bill0518.dmp bill rows=y
oracle: 10.2.1
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CHARACTERSET US7ASCII
target :
os: linux as 4 update4
.bash_profile NLS_LANG=AMERICAN_AMERICA.AL32UTF8
for run
imp bill/admin001 file=bill0518.dmp
oracle: 10.2.1
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CHARACTERSET AL32UTF8
imp log
Import: Release 10.2.0.1.0 - Production on Wed May 16 14:57:59 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc tion
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
Export file created by EXPORT:V10.02.01 via conventional path
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
export client uses AL32UTF8 character set (possible charset conversion)
. importing BILL's objects into BILL
. . importing table "MY_SESSION" 44 rows imported
. . importing table "T1"
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "BILL"."T1"."NAME" (actual: 62, maximum: 5 0)
Column 1 1
Column 2 ÖÐ¹úÈË. 0 rows impo rted
Import terminated successfully with warnings.

Yes it's probably due to different char sets
A way around it it to change the DB setup on the new database to use CHAR as default for varchar2 rows, and then use datapump to do your import/export, because datapump uses the default varchar2 type when creating tables that includes varchar2 (which is normally byte). Exp/imp uses the varchar2 type that is in the original database
Best regards
/Klaus

Minimum group membership for imp/exp for ora 8i(client) windows xp users

Hi to all,
For oracle 8i clients, windows xp users, what is the minimum group membership required that can be used so that the users can import or export dmps. Using Administrators imp/exp works ok... Any alternative?
Thanks

Hi Thierry,
Please do not confuse the issue. Here we have the windows Operating System - privilege and then the Oracle database user privilege. In my case the Oracle database user privilege is DBA. If the user is given a Windows - Administrators privilege (which I do want to give) the exp/imp creates the DMP and log file. But any other standard windows privilege (with DBA privilege) the exp/imp does not create the dmp and log file. I hope I am clear and now you can suggest some alternative solution to OS - administrator.
Thanks again

ORA-12560 TNS protocol Adapter error in 11g (11.1.0.6)

Hello All,
I have Oracle 11g installed on my machine and when i tried to log in to sql plus i got the error below:
ORA-12560 TNS protocol Adapter error
By setting the ORACLE_SID = orcl by browsing to the bin directory of Oracle Installation the above error disappaears and i am able to log in from sql plus.
My intention is to create a db backup for which i am trying to use the exp command...this time the same error appears.
Also the solution of setting the ORACLE_SID is cumbersome..everytimt i want to use sql plus i need to go in and set the ORACLE_SID.
Can anybody please help me out find a good solution for this?
Any help would be appreciated friends.....
Thanks in Advance!!!!!
Regards.
Alicia

Also the solution of setting the ORACLE_SID is cumbersome..everytimt i want to use sql plus i need to go in and set the ORACLE_SID.
Can anybody please help me out find a good solution for this?The solution depends on your (not specified) operating system...
Anyway, if you have more than one database it's normal that you have to set ORACLE_SID, if not how can Oracle know which database you want to access to ?
You can create batch files, one per database, or you can use connection strings, e.g. sqlplus username/password@<DB>.

How to export datbase with exp command

Hi guys,
How to export oracle database using exp command without including tables space names.
I tried with this
./exp username/password file=db-export.dmp
./imp username/password file=db-export.dmp full=y ignore=y
But when I try to import database with separate login(username/password) its giving following error for some tables,
ORA-00959: tablespace 'MANUJA' does not exist
MANUJA is my username of first database
any help ?
Thanks
Best Regards,
Manuja

Option 1:
./imp username/password file=db-export.dmp full=y
If still error then :
Option 2:
pre-create your table then import with ignore=y option.
If still error then :
make sure userB just have one default tablespace (BC) and quota only on BC. So if you have unlimited quota for userB on all tablespaces, then objects will go to original tablespace and not the tablespace you want to put in(to default tablespace).
Revoke any unlimited tablespace privs from userB and just have one default tablespace.
REVOKE UNLIMITED TABLESPACE FROM USERB;
imp system/manager fromUser=userA toUser=userA file=myexport.dmp log=myexport.log
Source: OrionNet @ remap tablespace using imp
Regards
Girish Sharma

SQL*Loader-704 & ORA-12560

Hi my oracle friends...
I'm getting this error when trying to use sqlldr:
SQL*Loader-704: Internal error: ulconnect: OCIServerAttach [0]
ORA-12560: TNS:protocol adapter error
I'm using this control file:
LOAD DATA
INFILE 'c:\exportmysql.exp'
BADFILE 'c:\badfile.txt'
APPEND
INTO TABLE HISTORICODAF
FIELDS TERMINATED BY '|'
CODIGOHISTORICO     INTEGER EXTERNAL,
CODIGODAF     CHAR,
TIPORESPOSTA     CHAR,
DATASISTEMA     DATE 'DD/MM/YYYY HH24:MI:SS',
VELOCIDADE     FLOAT EXTERNAL,
PROA     FLOAT EXTERNAL,
GEOMETRY COLUMN OBJECT
SDO_GTYPE INTEGER EXTERNAL,
SDO_SRID INTEGER EXTERNAL,
SDO_POINT COLUMN OBJECT
(X FLOAT EXTERNAL,
Y FLOAT EXTERNAL)
CODIGOUSUARIO     CHAR,
CODIGOEMPRESA     CHAR,
CODIGOOBJETO     CHAR,
DATAINICIOBUSCA     DATE 'DD-MM-YYYY HH24:MI:SS',
DATAFIMBUSCA     DATE 'DD-MM-YYYY HH24:MI:SS',
ESTADO     CHAR,
DATAGPS     DATE 'DD-MM-YYYY HH24:MI:SS',
DATAEQUIPAMENTO     DATE
And I'm using the right command-line:
sqlldr userid=daf/fad control=c:\control.ctl log=c:\sqlldr.log
Another doubt is: how Oracle knows wich of my services they need to connect?
Can I pass this in sqlldr command-line parameters or control file?
Thanks 4 all...

for this:
how Oracle knows wich of my services they need to connect?
Normally you have defined an environment variable called ORACLE_SID that tells oracle what instance to connect.
try doing the following for getting the value of the variable:
unix: echo $ORACLE_SID
windows: echo %ORACLE_SID%
And for the error, this is what I found, probably some one else have a different opinion:
Error:     LDR 704
Text:     Internal error: %s [%d]
Cause:     An internal error has occurred.
Action:     Make a note of the message and the number, then contact customer
     support.
Message was edited by:
Delfino Nunez

ORA 12560 What to do ??

I want to make a dump file for that reason
I went on the command prompt and
entered
EXP username/password
I get
EXP 0056 : Oracle error 12560 encountered
ORA-12560: TNS:Protocol adapter error
EXP-0000 :Export terminated unsuccessfully
Please advise what to do?? How do I get rid of this
Thanks
Nick....

Can you connect to the database with SQL*Plus without specifying a TNS name? In other words, does
sqlplus username/passwordwork, or do you need to specify @TNSName?
Justin
Distributed Database Consulting, Inc.
www.ddbcinc.com/askDDBC

Ora-12547 and ora-12560 Great Problem

Hello. Sorry for my english.
I've a great problem.
My server hp with 4 processor and 8 gb memory and oracle 9.2.0.6 and linux Red Hat Advanced Server have one great problem. If the connected user are 70 or more , I can't connect from the client with sqlplus name/password@service_name, but I can connect from the server with sqlplus name/password. sqlplus give me ora-12547 and if I launch sqlplus and after write user and password it give me ora-12560
If the session are 69 or less I can connect from the client and I can connect from the server.
The main applicatio work becaus it call oracle directly from server, but when the users are more then 70 I can't use odbc or Enterprise Manager Console from the client.
Any ideas ? Thank you.
Luca

MY INIT.ORA
# $Header: init.ora 06-aug-98.10:24:40 atsukerm Exp $
# Copyright (c) 1991, 1997, 1998 by Oracle Corporation
# NAME
# init.ora
# FUNCTION
# NOTES
# MODIFIED
# atsukerm 08/06/98 - fix for 8.1.
# hpiao 06/05/97 - fix for 803
# glavash 05/12/97 - add oracle_trace_enable comment
# hpiao 04/22/97 - remove ifile=, events=, etc.
# alingelb 09/19/94 - remove vms-specific stuff
# dpawson 07/07/93 - add more comments regarded archive start
# maporter 10/29/92 - Add vms_sga_use_gblpagfile=TRUE
# jloaiza 03/07/92 - change ALPHA to BETA
# danderso 02/26/92 - change db_block_cache_protect to dbblock_cache_p
# ghallmar 02/03/92 - db_directory -> db_domain
# maporter 01/12/92 - merge changes from branch 1.8.308.1
# maporter 12/21/91 - bug 76493: Add control_files parameter
# wbridge 12/03/91 - use of %c in archive format is discouraged
# ghallmar 12/02/91 - add global_names=true, db_directory=us.acme.com
# thayes 11/27/91 - Change default for cache_clone
# jloaiza 08/13/91 - merge changes from branch 1.7.100.1
# jloaiza 07/31/91 - add debug stuff
# rlim 04/29/91 - removal of char_is_varchar2
# Bridge 03/12/91 - log_allocation no longer exists
# Wijaya 02/05/91 - remove obsolete parameters
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
# You may also consider using Database Configuration Assistant tool (DBCA)
# to create INIT file and to size your initial set of tablespaces based
# on the user input.
# replace DEFAULT with your database name
db_name=DEFAULT
db_files = 80 # SMALL
# db_files = 400 # MEDIUM
# db_files = 1500 # LARGE
db_file_multiblock_read_count = 8 # SMALL
# db_file_multiblock_read_count = 16 # MEDIUM
# db_file_multiblock_read_count = 32 # LARGE
db_block_buffers = 100 # SMALL
# db_block_buffers = 550 # MEDIUM
# db_block_buffers = 3200 # LARGE
shared_pool_size = 3500000 # SMALL
# shared_pool_size = 5000000 # MEDIUM
# shared_pool_size = 9000000 # LARGE
log_checkpoint_interval = 10000
processes = 50 # SMALL
# processes = 100 # MEDIUM
# processes = 200 # LARGE
parallel_max_servers = 5 # SMALL
# parallel_max_servers = 4 x (number of CPUs) # MEDIUM
# parallel_max_servers = 4 x (number of CPUs) # LARGE
log_buffer = 32768 # SMALL
# log_buffer = 32768 # MEDIUM
# log_buffer = 163840 # LARGE
# audit_trail = true # if you want auditing
# timed_statistics = true # if you want timed statistics
max_dump_file_size = 10240 # limit trace file size to 5 Meg each
# Uncommenting the line below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest = disk$rdbms:[oracle.archive]
# log_archive_format = "T%TS%S.ARC"
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
# rollback_segments = (name1, name2)
# If using public rollback segments, define how many
# rollback segments each instance will pick up, using the formula
# # of rollback segments = transactions / transactions_per_rollback_segment
# In this example each instance will grab 40/5 = 8:
# transactions = 40
# transactions_per_rollback_segment = 5
# Global Naming -- enforce that a dblink has same name as the db it connects to
global_names = TRUE
# Edit and uncomment the following line to provide the suffix that will be
# appended to the db_name parameter (separated with a dot) and stored as the
# global database name when a database is created. If your site uses
# Internet Domain names for e-mail, then the part of your e-mail address after
# the '@' is a good candidate for this parameter value.
# db_domain = us.acme.com # global database name is db_name.db_domain
# FOR DEVELOPMENT ONLY, ALWAYS TRY TO USE SYSTEM BACKING STORE
# vms_sga_use_gblpagfil = TRUE
# FOR BETA RELEASE ONLY. Enable debugging modes. Note that these can
# adversely affect performance. On some non-VMS ports the db_block_cache_*
# debugging modes have a severe effect on performance.
#_db_block_cache_protect = true # memory protect buffers
#event = "10210 trace name context forever, level 2" # data block checking
#event = "10211 trace name context forever, level 2" # index block checking
#event = "10235 trace name context forever, level 1" # memory heap checking
#event = "10049 trace name context forever, level 2" # memory protect cursors
# define parallel server (multi-instance) parameters
#ifile = ora_system:initps.ora
# define two control files by default
control_files = (ora_control1, ora_control2)
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = TRUE
# Uncomment the following line, if you want to use some of the new 8.1
# features. Please remember that using them may require some downgrade
# actions if you later decide to move back to 8.0.
#compatible = 8.1.0

Error ORA-12560 prompts when trying to log in to the Enterprise Manager

Hi all,
I am a newbie to Oracle.
Just installed the Oracle 9i Database Enterprise Edition (9.0.1) into Windows Server 2003 Standard Edition. Problem is encountered when trying to log in to the Enterprise Manager Standalone mode using either system/oracle or scott/tiger as credentials. Error "ORA-12560: TNS:protocol adapter error" prompts.
I tried to check with some configuration and see whether the services are started. Services of "OracleOraHome90TNSListener" and "OracleServiceORCL" have been started and the database exists in the dedicated directory. Environment variables of "ORACLE_HOME" and "ORACLE_SID" have been added manually as the SID is set to orcl, which I just follow what the instruction manual has stated. Moreover, I can't get access using command prompt typing "svrmgrl"; error returned stating " 'svrmgrl' is not recognized as an internal or external command, operable program or batch file."
Another information is that there is no domain set in my server. Just a server with a name being assigned in a workgroup.
Hence, would you mind please advice me what to do in order to get access into the Enterprise Manager? It's quite an urgent task.
A million thx in advance!
Best Regards,
Karen

Hi Jigneshrp,
Thanks for your reply.
It is checked that the listener is running and TNS name service exists. Following your advice, I did create a new listener and another name service and use them, but the same error turns out when trying to log in to the Enterprise Manager again.
Additional information to take note for is that while reconfiguring the existing listener or creating a new listener, a mesage prompts stating "The information provided for this listener is currently in use by other software on this computer. You can proceed with the configuration as it is, but it will not be possible to start this listener until the conflict is resolved. Would you like to continue with the continue with the configuration anyway? Yes/No".
As for the reconfiguration or the new creation of TNS names service, when I am trying to test for the connection, the results in the details pane states that "Connecting... ORA-12560: TNS:protocol adapter error. The test did not succeed...."
Would you mind pls advice me on these?
Furthermore, there exist 2 questions I am wondering is that it is stated in the instruction manual that prior to the installation, a static IP should be specified for it instead of the DHCP one; hence, I wanna ask after the complete insallation, is it that the server should be running in the network, i.e. allow it to get connected with the outside network?
2nd question is that can Oracle 9i Database Server Standard Edition (9.0.1) be installed under a Windows Server 2003 Standard Edition and just a Window XP Professional?
Thanks for your reply.
Best Regards,
Karen

ORA-12560 on Windows 2000 sp4, Pentium 4 CPU running vmware and Pent

Hello all,
I am getting ORA-12560 error running svrmgrl,sqlplus or dbca after installing 8.1.7 release 3 and patched to 8.1.7.4. My oracle_sid is set, oracle_home is pointing to the right file system. listener and database services are up and running and tnsping comes back ok. I have exhausted all metalink doc referring to ora-12560 and windows 2000. Has anyone experienced this problem before? Any help is appreciated.

C:\Documents and Settings\oracle>set ORACLE_SID=test
C:\Documents and Settings\oracle>lsnrctl status
LSNRCTL for 32-bit Windows: Version 8.1.7.4.0 - Production on 29-AUG-2006 13:17:
13
(c) Copyright 1998 Oracle Corporation. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ATLBCO3DV)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 8.1.7.4.0 - Produc
tion
Start Date 29-AUG-2006 11:03:28
Uptime 0 days 2 hr. 13 min. 45 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File E:\oracle\apps\oracle\product\817\network\admin\listen
er.ora
Listener Log File E:\oracle\apps\oracle\product\817\network\log\listener
.log
Services Summary...
PLSExtProc has 1 service handler(s)
orcl has 1 service handler(s)
test has 1 service handler(s)
The command completed successfully
TNSNAMES entry:
TEST.CORP.CEFS.INT =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = XXX.XXX.XX.XX)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = test)
(SRVR = DEDICATED)
)

ORA-12560 while creating a database

Hi,
I tried to create a Oracle Database using Oracle installer.
I got the error ORA-12560
This is part of the logfile:
INFO: Configuration assistant "Oracle Net Configuration Assistant" succeeded
INFO: Command = oracle.assistants.server.DbcaCfgPlugIn C:\Windows\system32\cmd /c call E:\app\Administrator\product\11.1.0\db_1/bin/dbca.bat -progress_only -createDatabase -templateName General_Purpose.dbc -sid labor -gdbName labor.world -emConfiguration LOCAL -datafileJarLocation E:\app\Administrator\product\11.1.0\db_1\assistants\dbca\templates -datafileDestination E:\app\Administrator\oradata -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema true -recoveryAreaDestination NO_VALUE -totalMemory 818 -automaticMemoryManagement true -maskPasswords false -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Command = oracle.assistants.server.DbcaCfgPlugIn has failed
INFO: Configuration assistant "Oracle Database Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to E:\app\Administrator\product\11.1.0\db_1
Configuration directory is set to E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs. All xml files under the directory will be processed
INFO: The "E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is E:\app\Administrator\product\11.1.0\db_1\oui\bin\runConfig.bat ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home E:\app\Administrator\product\11.1.0\db_1 we use the runConfig Command instead of the plugin's command
INFO: Created a new file E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands.bak
SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
Can anybody help me
Operating system Windows Server 2008
A TNSNAMES.ORA was not created even if Oracle Net Config was successful (see above)
Regards
siegwiin

Hi,
Make sure that you point to the right path in ORACLE_HOME directory system variable.
If you already have one ORACLE COMPONENET RUNNING (SAY 10g SOA etc). Then we need to remove the path in the variable ORACLE_HOME and point to new oracle home path.
I had the similar issue it worked me. I hope it will work for you too as well.
-- Khaleel

ORA-12560 & imp\exp commands

Similar Messages

Maybe you are looking for