WebUtil error: WUC-6: Unable to read WebUtil configuration file
Dear Colleague,
I received the following error:
WUC-6: Unable to read WebUtil configuration file
c:\OraHome_BIForms\forms\server\webutil.cfg
In the meantime, I have verified that my default.env file contains the following path definition:
# webutil config file path
WEBUTIL_CONFIG=C:\OraHome_BIForms\forms\server\webutil.cfg
What is wrong here? Does "unable to read..." mean that the file security settings do not allow read access to the webutil.cfg file?
I would appreciate any advice you can give me.
Thank you and kind regards,
Randy
In the meantime, I have figured out the solution to my problem.
The webutil.cfg file was not in the directory that was being pointed to in the path parameter.
Regards,
Randy
Similar Messages
-
Webutil error WUC-19 Unable to write t local file
When the user have all permissions on the PC, there is no message.
But if he have not, he get the WUC-19 message each time
the Forms load with WEBUTIL.PLL attached.
In which local(client) directory Webutil try to write ?Francois,
WebUtil writes to the \bin directory of the Jinitiator installation.
Frank -
Hi All,
I have a painful problem with Oracle 10g Webgate. I am using Oracle_Access_Manager10_1_4_3_0_linux64_APACHE22_WebGate to procted Apache resource. I have some problem in Custom Authentication plugin. which is not still resolve(https://forums.oracle.com/thread/2549716).
Now I have apply patch BP9 (Oracle_Access_Manager10_1_4_3_0_BP09_Patch_linux64_APACHE22_WebGate) for Webgate, Now I have a new issue, I am unable to get the logon page of OAM when I try to access my Apache resource.
The Error Message in the browser is:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, root@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Apache/2.2.3 (Oracle) Server at apache.tigerit.com Port 80
In the error log file of Apache I have found
[Sun Jun 23 11:53:17 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz: Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
[Sun Jun 23 11:53:17 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz: Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
[Sun Jun 23 11:53:20 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz: Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
[Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz: Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
[Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz: Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
[Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz: Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
Can Anyone help me regarding this issue...
Thanks
Tamim KhanHi Colin,
Thanks for your help, You are right I have change the permission of /opt/netpoint/webgate/access/oblix/lib/libxmlengine.so.
Now I am able to access the logon page of the access manager.
But the problem as I mention in (https://forums.oracle.com/thread/2549716) my ObSSOCookie value is still loggedcontinue.
My Authentication return (ExecutionStatus.SUCCESS) Successful from the Java Code , and I am unable to login in the application. The thing is I can't manipulate ObSSOCookie from Java code.
I have apply Patch 12363955 to resolve this issue. But this patch is now to resolve this issue.
Have you any idea how to resolve this issue.
Thanks
Tamim Khan -
"Error: Final Cut Pro was unable to read the movie file just captured"
Hello everyone!
We had a computer crash while we were working on Final Cut Pro and backing up some media to a hard drive.
Since then, whenever we "capture' video footage and hit the escape key to stop capturing - we get -
"Error: Final Cut Pro was unable to read the movie file just captured"
We reinstalled the Final Cut Pro software all over again thinking that maybe the software got corrupted and we also rectified any disk permissions for the hard drives.
Any ideas?
Thanks
Efrain
G 5 Mac OS X (10.4.8)We had a computer crash while we were working on Final Cut Pro and backing up some media to a hard drive.< </div>
You eventually want to figure out how that happened and make sure you fix it.
Since then, whenever we "capture' video footage and hit the escape key to stop capturing - we get -
"Error: Final Cut Pro was unable to read the movie file just captured"
<
You reformatted the external drive, yes? You might not have used the correct initialization setting. Should be Macintosh HFS, journalling is optional. Or you have a drive formatted for Winderz.
Aside from incorrect drive formatting, we have seen this error if the capture is incomplete or improperly terminated.
It's not an FCP issue, it's hardware.
bogiesan -
ORA-29400: data cartridge error/IMG-00703: unable to read image data error
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0
ORA-29400: data cartridge error
IMG-00703: unable to read image data
ORA-06512: at "ORDSYS.ORDIMERRORCODES", line 75
ORA-06512: at "ORDSYS.ORDIMERRORCODES", line 65
ORA-06512: at "ORDSYS.ORDIMG_PKG", line 37
ORA-06512: at "ORDSYS.ORDIMAGE", line 927
is raised when the following trigger is processing certain JPGs (example). Other JPGs are handled as expected:
create or replace trigger photo_size_trg
before insert or update on photos
for each row
declare
photo_width integer;
begin
-- Check to see if the new photograph is different from the old one... --
if dbms_lob.compare(:old.photo, :new.photo) != 0
then
-- ...if so, check to see if it's wider than the desired 250 pixel --
-- maximum... --
photo_width := to_number(ordImage.getMetadata(:new.photo)(1).extract('/ordImageAttributes/width/text()').getStringVal());
if photo_width > 250
then
-- ...and if so, apply an image transform that will resize to the photo --
-- to a maximum of 250 pixels wide, keeping the original aspect ratio. --
-- There doesn't seem to be an elegant way of specifying a constraint --
-- in one dimension like this, so the height is specifed as a large --
-- enough value to cover all practical contingencies. --
ordImage.process(:new.photo, 'maxScale=250 10000');
end if;
end if;
end;Any thoughts/suggestions?hi,
I am getting following error,kindly help me out to rectify this ..
thank you
ORA-29400: data cartridge error
ORA-00600: internal error code, arguments: [kokbCollTerminate], [13], [], [], [], [], [], [] -
FCP5: Capture ERROR: "FCP was unable to read movie file just captured"
Something I've never had trouble before has just happened: I get the following error message when I try to capture DV footage as soon as it has completed the capture: "FCP was unable to read the movie file just captured" It doesn't matter what length the file is.
I am using a Sony Z1 and have captured hundreds of hours of footage. I tried capturing HDV footage and it works fine. My sequence and capture settings all match what's on tape.
When I try in iMovie HD, it captures DV fine.
I checked software update and there's nothing for me right now. The only thing that has changed on my system is updating to OS 10.5.4 along with the Quicktime and iTunes updates. Could that be the problem? But why does iMovie work fine then?
Any ideas would be mucho appreciadoForgot to add, if I capture that same HDV tape but downsample it to DV within the camera, it also does not save the captured file. Thanks
-
I am unable to sync to my ipod. Error message states "unable to sync because duplicate file name exist". Any ideas on how to remedy this problem?
Were some of the songs purchased from a different itunes account?
-
ASDM is unable to read the configuration from ASA.
Earlier today I was configuring the Cisco ASA (7.2(2)) using the ASDM, but after a reboot of the appliance I now get the following:
ASDM is unable to read the configuration from ASA.
This happens shortly after ?Loading running configuration from the device? appears in the ASDM status window.
I have tried restarting both the appliance and my workstation, but the issue persists. I have also tried clearing the ASDM cache, but that doesn?t help either. The issue occurs whether I used the Cisco ASDM Launcher or the web interface.
SSH access to the appliance works fine.
Thanks for any assistance (why is it that Cisco?s GUIs always have issues?!?).I have exactly the same issue , SSH works fine but ASDM and Web interface reply with that error message "ASDM is unable to read the configuration from ASA".
My ASA is a 5520 ver 7.1(2) with ASDM 5.1(2)
Could it be something related to Java ?
Thanks for any hint. -
ITUNES WILL NOT DELETE FROM ADD @ REMOVE PROGRAMS,
MESSAGE, READS a network error occured while attempting to read from the file C:WINDOWS\installer\iTunes.msiAll sorted now just needed to repair itunes from control panel
-
while updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I am getting "a network error occurred while attempting to read from the file c:\windows\installer\itunes.msi" when I attempt to install itunes. Can anybody help me to resolve this issue?
You can try disabling the computer's antivirus and firewall during the download the iTunes installation
Also try posting in the iTunes forum since it is not an iPod touch problem. -
iTunes has tried to update itself and runs into an error and tells me to manually install. When I d/l and run the iTunesSetup.exe file I always encounter the following error message...
"A network error occured while attempting to read from the file C;|Windows|Installer|iTunes.msi" and iTunes does not update to iTunes 10.4.1.
Anyone know what is creating this error message? Thanks for the help...(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Hi
Hope someone can help me with this one, have a new computer with windows 7 as the operating system, have installed elements 7 and have now purchased the 50d, as i shoot in raw have tried to open the file but elements is unable to read the raw file, have looked on various threads and have downloaded the new version of raw, this version is saved in my download file directory, have copied across these files to the elements folder but i still cannot read my raw file for the 50d, is there something i have missed.
collisaplease have a look at the folllowing link about the isntallation of the camera raw plugin.
http://kb2.adobe.com/cps/407/kb407344.html
be sure not to have the older version of camera raw plugin in the same folder as that of new one. dont even rename it. Remove it and store it in some other location in case you need to revert back the changes. The camera raw plugin is called : Camera Raw
thanks -
my adobe elements version 12 is unable to read the raw files from my canon camera 70D.
You need Camera Raw 8.2 or higher.
Elements 12 shipped with 8.1.
Click Help > Updates to update Camera Raw -
itunes unable to read/locate music files as they have been converted to HP Connected Music files - can anyone assist ?
You need to associate your music files to iTunes instead of HP.
Control Panel
Programs
Default Programs
Set Associations
Double click on the relevant item and select iTunes from the list.
Maybe you are looking for
-
How can I migrate an Aperture library from an external HDD with Mac OS Extended (Journaled, Encrypted) format? I used to store my pictures on an external hard drive using the latest version of Aperture. Now I tried migrating my Aperture library to Ph
-
Using iPod with external Hard Drive connected to laptop
Is there a way to use the iPod video and an external hard drive connected to a Dell Latitude D600 laptop at the same time? I can use one or the other but not both. When both are connected using the usb ports on the back of the laptop, the iPod is not
-
Phone will not ring, no caller ID...
Ok, I have had this happened about five times now. My 8130 will suddenly start acting really sluggish. The hourglass symbol spins and spins when I click on anything and it takes apps forever to come up. And EVERYTIME that has happened, from then on o
-
I received an e-mail from a friend that had a suspicious looking link embedded in it. I did not navigate to the link in my web browser but I did do a "quick look" in Mac Mail. Does this open me up to any vulnerability? If so, is there a way to check
-
No authorization for printer "LP01"
Hi All, i wish to archive the data in BW. for that i had created archive object also. now when i schedule the write job it is giving me the error as following No authorization for printer "LP01". i had checked the user authorizations and i had assign