Oracle 10.2 odbc on solaris
Is odbc on solaris is supported with gcc 3.3.2...
To be specific can I link libodbc.so with an application compiled using gcc?
Looking for an alternative compatible construct than the following
Discussion Forums » Database » Instant Client >> development compatibility question on solaris
development compatibility question on solaris
Rgds
Message was edited by:
user527440
Hi,
check out ASM. Some storage vendors have good white papers about how to combine the stength of ASM with the strength of their products. What SAN are you using ?
In combination with RAC I would without any doubt recommend ASM.
with kind regards,
Ronald
http://ronr.nl/unix-dba
Similar Messages
-
Error fetching data from a foxpro db using Oracle Gateway for ODBC
Hi.
I have an 10.2.0.1 database an a 11.2.0 Oracle Gateway for ODBC installed and configured.
The dblink test works fine, I can connect with the foxpro database because if I execute desc centros I can see the
columns of table centros.
The problem comes when I try to execute Select * from centros@fox1;
A syntax error is returned ([Microsoft][ODBC Visual FoxPro Driver]Syntax error. {42000,NativeErr = 200})
I paste down the output of the trace file with HS_FDS_TRACE_LEVEL=255
If I run select codcen from centros@fox1; another error is shown. Tell me if you want the other trace file.
select codcen from centros@fox1
ERROR en lÝnea 1:
ORA-00904: "CODCEN": identificador no vßlido
Oracle Corporation --- JUEVES MAY 31 2012 13:11:24.765
Heterogeneous Agent Release
11.2.0.1.0
Oracle Corporation --- JUEVES MAY 31 2012 13:11:24.750
Version 11.2.0.1.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "255"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
setting HS_FDS_RECOVERY_PWD to default value
setting HS_FDS_TRANSACTION_LOG to default of HS_TRANSACTION_LOG
setting HS_IDLE_TIMEOUT to default of 0
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "UCS2"
setting HS_FDS_TIMESTAMP_MAPPING to default of "DATE"
setting HS_FDS_DATE_MAPPING to default of "DATE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_RSET_RETURN_ROWCOUNT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "TRUE"
setting HS_FDS_SUPPORT_STATISTICS to default of "FALSE"
Parameter HS_FDS_QUOTE_IDENTIFIER is not set
setting HS_KEEP_REMOTE_COLUMN_SIZE to default of "OFF"
setting HS_FDS_GRAPHIC_TO_MBCS to default of "FALSE"
setting HS_FDS_MBCS_TO_GRAPHIC to default of "FALSE"
Default value of 32 assumed for HS_FDS_SQLLEN_INTERPRETATION
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics;gtw$:SQLGetInfo"
setting HS_FDS_DELAYED_OPEN to default of "TRUE"
setting HS_FDS_WORKAROUNDS to default of "0"
Exiting hgosdip, rc=0
ORACLE_SID is "DAVID"
Product-Info:
Port Rls/Upd:1/0 PrdStat:0
Agent:Oracle Database Gateway for ODBC
Facility:hsa
Class:ODBC, ClassVsn:11.2.0.1.0_0008, Instance:DAVID
Exiting hgogprd, rc=0
hostmstr: 2057416704: HOA After hoagprd
hostmstr: 2057416704: HOA Before hoainit
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=1000
HOCXU_DB_CSET=178
HOCXU_SEM_VER=102000
Entered hgolofn at 2012/05/31-13:11:25
Exiting hgolofn, rc=0 at 2012/05/31-13:11:25
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
Invalid value of 32 given for HS_FDS_SQLLEN_INTERPRETATION
treat_SQLLEN_as_compiled = 1
Exiting hgoinit, rc=0 at 2012/05/31-13:11:25
hostmstr: 2057416704: HOA After hoainit
hostmstr: 2057416704: HOA Before hoalgon
Entered hgolgon at 2012/05/31-13:11:25
reco:0, name:SYSTEM, tflag:0
Entered hgosuec at 2012/05/31-13:11:25
Exiting hgosuec, rc=0 at 2012/05/31-13:11:25
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using SYSTEM as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2012/05/31-13:11:25
HS_FDS_CONNECT_INFO = "Prueba_Foxpro"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2012/05/31-13:11:25
dsn:Prueba_Foxpro, name:SYSTEM
optn:
Entered hgocip at 2012/05/31-13:11:25
dsn:Prueba_Foxpro
Exiting hgocip, rc=0 at 2012/05/31-13:11:25
##>Connect Parameters (len=39)<##
## DSN=Prueba_Foxpro;
#! UID=SYSTEM;
#! PWD=*
Exiting hgogenconstr, rc=0 at 2012/05/31-13:11:25
Entered hgopoer at 2012/05/31-13:11:26
hgopoer, line 233: got native error 0 and sqlstate 01000; message follows...
[*Microsoft][Administrador de controladores ODBC] El controlador no admite una versión de ODBC distinta de la que la necesita la aplicación (vea SQLSetEnvAttr)*. {01000}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:26
hgocont, line 2686: calling SqlDriverConnect got sqlstate 01000
Entered hgolosf at 2012/05/31-13:11:26
ODBC Function-Available-Array 0xFFFE 0x00FF 0xFF00 0xAA7F 0x03B3 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0xEE00 0x395C
Exiting hgolosf, rc=0 at 2012/05/31-13:11:26
DriverName:VFPODBC.DLL, DriverVer:06.86.0001
DBMS Name:Visual FoxPro, DBMS Version:03.00.0000
Exiting hgocont, rc=0 at 2012/05/31-13:11:26 with error ptr FILE:hgocont.c LINE:2686 ID:SQLDriverConnect
Entered hgopoer at 2012/05/31-13:11:26
hgopoer, line 233: got native error 0 and sqlstate HYC00; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Driver not capable {HYC00}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:26
hgolgon, line 795: calling SQLGetInfo got sqlstate HYC00
SQLGetInfo returns N for SQL_CATALOG_NAME
Exiting hgolgon, rc=0 at 2012/05/31-13:11:26 with error ptr FILE:hgolgon.c LINE:795 ID:GetInfo: Support catalogs
hostmstr: 2036506624: HOA After hoalgon
RPC Calling nscontrol(0), rc=0
hostmstr: 2036506624: RPC Before Upload Caps
hostmstr: 2036506624: HOA Before hoaulcp
Entered hgoulcp at 2012/05/31-13:11:26
Entered hgowlst at 2012/05/31-13:11:26
Exiting hgowlst, rc=0 at 2012/05/31-13:11:26
SQLGetInfo returns 0x0 for SQL_OWNER_USAGE
TXN Capable:1, Isolation Option:0x2
SQLGetInfo returns 0 for SQL_MAX_SCHEMA_NAME_LEN
SQLGetInfo returns 128 for SQL_MAX_TABLE_NAME_LEN
SQLGetInfo returns 0 for SQL_MAX_PROCEDURE_NAME_LEN
SQLGetInfo returns ` (0x60) for SQL_IDENTIFIER_QUOTE_CHAR
SQLGetInfo returns Y for SQL_COLUMN_ALIAS
16 instance capabilities will be uploaded
capno:1964, context:0x00000000, add-info: 0
capno:1989, context:0x00000000, add-info: 0
capno:1991, context:0x0001ffff, add-info: 0
capno:1992, context:0x0001ffff, add-info: 1, translation:"`"
capno:3042, context:0x00000000, add-info: 0, translation:"42"
capno:3047, context:0x00000000, add-info: 0, translation:"57"
capno:3049, context:0x00000000, add-info: 0, translation:"59"
capno:3050, context:0x00000000, add-info: 0, translation:"60"
capno:3066, context:0x00000000, add-info: 0
capno:3067, context:0x00000000, add-info: 0
capno:3068, context:0x00000000, add-info: 0
capno:3069, context:0x00000000, add-info: 0
capno:3500, context:0x00000001, add-info: 91, translation:"42"
capno:3501, context:0x00000001, add-info: 93, translation:"57"
capno:3502, context:0x00000001, add-info: 107, translation:"59"
capno:3503, context:0x00000001, add-info: 110, translation:"60"
Exiting hgoulcp, rc=0 at 2012/05/31-13:11:26
hostmstr: 2036506624: HOA After hoaulcp
hostmstr: 2036506624: RPC After Upload Caps
hostmstr: 2036506624: RPC Before Upload DDTR
hostmstr: 2036506624: HOA Before hoauldt
Entered hgouldt at 2012/05/31-13:11:27
NO instance DD translations were uploaded
Exiting hgouldt, rc=0 at 2012/05/31-13:11:27
hostmstr: 2036506624: HOA After hoauldt
hostmstr: 2036506624: RPC After Upload DDTR
hostmstr: 2036506624: RPC Before Begin Trans
hostmstr: 2036506624: HOA Before hoabegn
Entered hgobegn at 2012/05/31-13:11:27
tflag:0 , initial:1
hoi:0x12f094, ttid (len 54) is ...
00: 54455354 2E524547 52455353 2E524442 [TEST.REGRESS.RDB]
10: 4D532E44 45562E55 532E4F52 41434C45 [MS.DEV.US.ORACLE]
20: 2E434F4D 2E663033 63383037 372E392E [.COM.f03c8077.9.]
30: 34342E37 3735 [44.775]
tbid (len 10) is ...
0: 09002C00 07030000 0104 [..,.......]
Exiting hgobegn, rc=0 at 2012/05/31-13:11:27
hostmstr: 2036506624: HOA After hoabegn
hostmstr: 2036506624: RPC After Begin Trans
hostmstr: 2036506624: RPC Before Describe Table
hostmstr: 2036506624: HOA Before hoadtab
Entered hgodtab at 2012/05/31-13:11:27
count:1
table: CENTROS
Entered hgopdsc at 2012/05/31-13:11:27
Describing procedure CENTROS
Output hoada
hgopdsc, line 1426: NO hoada to print
Exiting hgopdsc, rc=942 at 2012/05/31-13:11:27
The hoada for table CENTROS follows...
hgodtab, line 904: NO hoada to print
Exiting hgodtab, rc=0 at 2012/05/31-13:11:27
hostmstr: 2036506624: HOA After hoadtab
hostmstr: 2036506624: RPC After Describe Table
hostmstr: 2036506624: RPC Before SQL Bundling
hostmstr: 2036506624: HOA Before hoxpars
Entered hgopars, cursor id 1 at 2012/05/31-13:11:27
type:0
SQL text from hgopars, id=1, len=23 ...
00: 53454C45 4354202A 2046524F 4D202243 [SELECT * FROM "C]
10: 454E5452 4F5322 [ENTROS"]
Exiting hgopars, rc=0 at 2012/05/31-13:11:28
hostmstr: 2036506624: HOA After hoxpars
hostmstr: 2036506624: RPC After SQL Bundling
hostmstr: 2036506624: RPC Before SQL Bundling
hostmstr: 2036506624: HOA Before hoxopen
Entered hgoopen, cursor id 1 at 2012/05/31-13:11:28
hgoopen, line 87: NO hoada to print
Deferred open until first fetch.
Exiting hgoopen, rc=0 at 2012/05/31-13:11:28
hostmstr: 2036506624: HOA After hoxopen
hostmstr: 2036506624: HOA Before hoxdscr
Entered hgodscr, cursor id 1 at 2012/05/31-13:11:28
Allocate hoada @ 023E983C
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]*Descriptor type out of range* {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:1(codcen): dtype:1 (CHAR), prc/scl:8/0, nullbl:0, octet:8, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:2(litcen): dtype:1 (CHAR), prc/scl:45/0, nullbl:0, octet:45, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:3(codpos): dtype:1 (CHAR), prc/scl:5/0, nullbl:0, octet:5, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:4(codprov): dtype:1 (CHAR), prc/scl:2/0, nullbl:0, octet:2, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:5(codmun): dtype:1 (CHAR), prc/scl:3/0, nullbl:0, octet:3, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:6(codecol): dtype:1 (CHAR), prc/scl:2/0, nullbl:0, octet:2, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:7(codesin): dtype:1 (CHAR), prc/scl:2/0, nullbl:0, octet:2, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:8(cb): dtype:1 (CHAR), prc/scl:4/0, nullbl:0, octet:4, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:9(cs): dtype:1 (CHAR), prc/scl:4/0, nullbl:0, octet:4, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:10(digitocon): dtype:1 (CHAR), prc/scl:2/0, nullbl:0, octet:2, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:11(cuenta): dtype:1 (CHAR), prc/scl:10/0, nullbl:0, octet:10, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopcda at 2012/05/31-13:11:28
Column:12(solar): dtype:2 (NUMERIC), prc/scl:5/0, nullbl:0, octet:10, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopcda at 2012/05/31-13:11:28
Column:13(construido): dtype:2 (NUMERIC), prc/scl:5/0, nullbl:0, octet:10, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:14(domicen): dtype:1 (CHAR), prc/scl:40/0, nullbl:0, octet:40, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:15(telef): dtype:1 (CHAR), prc/scl:11/0, nullbl:0, octet:11, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:16(fax): dtype:1 (CHAR), prc/scl:11/0, nullbl:0, octet:11, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:17(cif): dtype:1 (CHAR), prc/scl:11/0, nullbl:0, octet:11, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:18(litloc): dtype:1 (CHAR), prc/scl:30/0, nullbl:0, octet:30, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
hgodscr, line 910: Printing hoada @ 023E983C
MAX:18, ACTUAL:18, BRC:100, WHT=5 (SELECT_LIST)
hoadaMOD bit-values found (0x200:TREAT_AS_CHAR)
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
1 CHAR N 8 8 0/ 0 0 0 200 codcen
1 CHAR N 45 45 0/ 0 0 0 200 litcen
1 CHAR N 5 5 0/ 0 0 0 200 codpos
1 CHAR N 2 2 0/ 0 0 0 200 codprov
1 CHAR N 3 3 0/ 0 0 0 200 codmun
1 CHAR N 2 2 0/ 0 0 0 200 codecol
1 CHAR N 2 2 0/ 0 0 0 200 codesin
1 CHAR N 4 4 0/ 0 0 0 200 cb
1 CHAR N 4 4 0/ 0 0 0 200 cs
1 CHAR N 2 2 0/ 0 0 0 200 digitocon
1 CHAR N 10 10 0/ 0 0 0 200 cuenta
3 DECIMAL N 7 7 5/ 0 0 0 0 solar
3 DECIMAL N 7 7 5/ 0 0 0 0 construido
1 CHAR N 40 40 0/ 0 0 0 200 domicen
1 CHAR N 11 11 0/ 0 0 0 200 telef
1 CHAR N 11 11 0/ 0 0 0 200 fax
1 CHAR N 11 11 0/ 0 0 0 200 cif
1 CHAR N 30 30 0/ 0 0 0 200 litloc
Exiting hgodscr, rc=0 at 2012/05/31-13:11:28 with error ptr FILE:hgodscr.c LINE:615 ID:Transfer Octet Length
hostmstr: 2036506624: HOA After hoxdscr
hostmstr: 2036506624: RPC After SQL Bundling
hostmstr: 2036506624: RPC Before SQL Bundling
hostmstr: 2036506624: HOA Before hoxclse
Entered hgoclse, cursor id 1 at 2012/05/31-13:11:28
Exiting hgoclse, rc=0 at 2012/05/31-13:11:28
hostmstr: 2036506624: HOA After hoxclse
hostmstr: 2036506624: HOA Before hoadafr
Entered hgodafr, cursor id 1 at 2012/05/31-13:11:28
Free hoada @ 023E983C
Exiting hgodafr, rc=0 at 2012/05/31-13:11:28
hostmstr: 2036506624: HOA After hoadafr
hostmstr: 2036506624: HOA Before hoxpars
Entered hgopars, cursor id 1 at 2012/05/31-13:11:28
type:0
SQL text from hgopars, id=1, len=235 ...
00: 53454C45 43542041 312E2263 6F646365 [SELECT A1."codce]
10: 6E222C41 312E226C 69746365 6E222C41 [n",A1."litcen",A]
20: 312E2263 6F64706F 73222C41 312E2263 [1."codpos",A1."c]
30: 6F647072 6F76222C 41312E22 636F646D [odprov",A1."codm]
40: 756E222C 41312E22 636F6465 636F6C22 [un",A1."codecol"]
50: 2C41312E 22636F64 6573696E 222C4131 [,A1."codesin",A1]
60: 2E226362 222C4131 2E226373 222C4131 [."cb",A1."cs",A1]
70: 2E226469 6769746F 636F6E22 2C41312E [."digitocon",A1.]
80: 22637565 6E746122 2C41312E 22736F6C ["cuenta",A1."sol]
90: 6172222C 41312E22 636F6E73 74727569 [ar",A1."construi]
A0: 646F222C 41312E22 646F6D69 63656E22 [do",A1."domicen"]
B0: 2C41312E 2274656C 6566222C 41312E22 [,A1."telef",A1."]
C0: 66617822 2C41312E 22636966 222C4131 [fax",A1."cif",A1]
D0: 2E226C69 746C6F63 22204652 4F4D2022 [."litloc" FROM "]
E0: 43454E54 524F5322 204131 [CENTROS" A1]
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 200 and sqlstate 42000; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Syntax error. {42000,NativeErr = 200}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgopars, line 457: calling SQLPrepare got sqlstate 42000
Exiting hgopars, rc=28500 at 2012/05/31-13:11:28 with error ptr FILE:hgopars.c LINE:487 ID:Prepare stmt
hostmstr: 2036506624: HOA After hoxpars
hostmstr: 2036506624: RPC After SQL BundlingThe first issue I see is that Oracle 10.2.0.1 was never certified with DG4ODBC 11. Only 10.2.0.4 or 10.2.0.5 can be used as the Oracle database HS kernel requires a gateway compatibility patch and this patch is included in 10.2.0.4 or 10.2.0.5 Oracle database patch set.
Then another error in the trace is that for each column description you have an error:
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]*Descriptor type out of range* {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
It seems it is not critical as DG4ODBC continues, but a more detailed analysis would require an ODBC trace.
When looking at the table description it seems the column names are all in lower letters, for example: solar. So commonly Dg4ODBC needs to quote the names
00: 53454C45 43542041 312E2263 6F646365 [SELECT A1."codce]
10: 6E222C41 312E226C 69746365 6E222C41 [n",A1."litcen",A]
20: 312E2263 6F64706F 73222C41 312E2263 [1."codpos",A1."c]
30: 6F647072 6F76222C 41312E22 636F646D [odprov",A1."codm]
40: 756E222C 41312E22 636F6465 636F6C22 [un",A1."codecol"]
50: 2C41312E 22636F64 6573696E 222C4131 [,A1."codesin",A1]
60: 2E226362 222C4131 2E226373 222C4131 [."cb",A1."cs",A1]
70: 2E226469 6769746F 636F6E22 2C41312E [."digitocon",A1.]
80: 22637565 6E746122 2C41312E 22736F6C ["cuenta",A1."sol]
90: 6172222C 41312E22 636F6E73 74727569 [ar",A1."construi]
A0: 646F222C 41312E22 646F6D69 63656E22 [do",A1."domicen"]
B0: 2C41312E 2274656C 6566222C 41312E22 [,A1."telef",A1."]
C0: 66617822 2C41312E 22636966 222C4131 [fax",A1."cif",A1]
D0: 2E226C69 746C6F63 22204652 4F4D2022 [."litloc" FROM "]
E0: 43454E54 524F5322 204131 [CENTROS" A1]
and according to the trace the FoxPro ODBC driver doesn't like these quotes and reports a syntax error.
So this explains at least why select codcen from centros@fox1 will fail. In general the Oracle database is case insensitive and translates all object names to upper case and the select it will pass to the foreign database would be similar to:
select CODCEN from CENTROS => which will fail as FoxPro is case sensitive. So the error message ORA-00904 (missing column name) is correct and the statement you need to use is:
select "codcen" from centros@fox1;
But this might lead again to the Syntax error you got earlier => You need to check which sign (single quote, back tick, double quote) Foxpro uses to quote object names and then set the gateway parameter HS_FDS_QUOTE_IDENTIFIER accordingly.
To check which character can be used to quote column/table names you might use the Microsoft ODBc test utility which was distributed in the old MDAC 2.8:
http://www.microsoft.com/downloads/details.aspx?familyid=5067faf8-0db4-429a-b502-de4329c8c850&displaylang=en
Edited by: kgronau on Jun 1, 2012 7:27 AM
If you know where I can download the MS FoxPro ODBC driver, please let me know and I'll check. -
Help needed on installation of Oracle 9i EE on Sun Solaris 8
Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
SimonI have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM -
Installation problem of Oracle 8.1.7 on solaris 10 x86
Hi,
I tried to install the Oracle 8.1.7 on solaris 10 x86 and I got an error message shows: "cannot write to /opt/oracle/product/8.1.7/jar/classes2.jar".checking the log it shows:
Exception: IOException2
and exception: copyGroupFromJar. I ignored the error but the installation failed.By the way, I was not asked to run root.sh during the installation. Can anyone kindly tell me how to make it?
yours
zeushdHere are some additional statements for 10g on Solaris 10g x86:
1. Execute runInstaller with the -ignoreSysPrereqs option.
2. Select 'Do not create a starter database' when installing Oracle 10g.
3. During installation, the warning message 'SUNWsprox package not installed' can be ignored. Press Continue to resume the installation.
4. Download and install patch 4186426 from metalink.oracle.com after installing Oracle 10g software.
5. If you have an End User Solaris 10 distribution, install the SUNWuiu8 package prior to installing the 10g client. -
Petstore 1.3 with Oracle 8.1.7 on Solaris 9 - deployment error
Hello,
I'm trying to get Petstore 1.3 shipped with WebLogic Server 7.0 to work with Oracle
8.1.7 on Solaris 9 with a third-party (Oracle) jdbc driver (classes12). I did
the following:
1) created a new connection pool with the correct Oracle database URL and driver
class name (oracle.jdbc.driver.OracleDriver), also user/password properties for
the Oracle db, and the WL server selected in targets;
2) created a database schema for Oracle based on the data in Pointbase and the
weblogic-cmp-rdbms-jar file as well as petstore_catalog_utf8.sql;
3) created a new tx datasource pointing to the Oracle conn pool;
4) modified the catalog component's ejb-jar.xml file's env-entry to contain CatalogOracleDAOImpl;
5) put weblogic.jar in the classpath;
6) used Java's dbping utility to check connection to the database via the Oracle
driver (works fine--no network adapter error or anything related).
I then rebuilt the ear files (build is successful), but when deploying get the
following error:
"Cannot deploy EJB AccountEJB from customerEjb.jar. Cannot find datasource for
JNDI datasource-petstorePool" and says to make sure the JNDI name and deployment
descriptors are correct (I checked the customer component's deployment descriptors
against the tx datasources' JNDI and they match).
What step(s) am I missing? Any suggestions on what else I need to modify would
be very much appreciated.
Thanks,
Beverly ClaireBeverly:
If you have 8.1, then you should be able to simply and easily create a
connection pool to petstore via the console.
The current error you encountering: "petstorePool does not exist" is
because either:
petstorePool is not defined or there was a failure when the pool was first
created trying to connect to the DBMS.
The full errror should be in the log file prior to the TXDatasource error.
Cheers
mbg
"Beverly Claire" <[email protected]> wrote in message
news:[email protected]...
>
Hello Rob,
Thanks for your reply. Yes, the tx datasource's JNDI name isdatasource-petstorePool.
The server log says that "petstorePool does not exist".
My conn pool contents:
Name: petstorePool
URL: jdbc:oracle:thin:@<replaced with db address>:<replaced with dbport>:<replaced
with db SID>
Driver Class Name: oracle.jdbc.driver.OracleDriver
Properties: user=<replaced with username*>
password=<replaced with password*>
*same username and password used to set up the Petstore tables in Oracledb.
>
My tx datasource contents:
Name: PetstoreDataSource
JNDI: datasource-petstorePool
Pool Name: petstorePool
No, actually we're not evaluating in the sense of just-trying-things-out.One
of our clients is considering an application server. They're relying on usfor
help in choosing which would be best. As of now, we are comparing BEA WLServer
7 and 8.1, Sun ONE Application Server 7 EE, Oracle 9i Application Server,and
Fujitsu Interstage v5 Application Server. For cluster testing andperformance
comparison purposes, we'd like to use the same J2EE Application across allservers,
and the obvious choice is Petstore 1.3. One aim is to smoothly connect toan Oracle
database. The other app servers provide setup scripts and databaseschemas for
Petstore-with-Oracle, so db conn and deployment are not a problem at all.As for
WL, we've been trying to get Petstore (both the version downloaded fromSun's
Java Blueprints and the version that shipped with WL 7) to work withOracle, but
no luck so far. It's getting a bit frustrating, given the ease with whichthings
worked out with the other app servers.
Yes, I've tried out Avitek MedRec for WL 8.1, and this time BEA has kindlymade
provisions for Oracle db, so connection to Oracle is not a problem. I'mhoping
BEA will come around to doing the same thing for Petstore, although I'mguessing
that won't be in the near future.
Any other suggestions would be much appreciated.
Thanks,
Bevery Claire -
Isqlplus with oracle 8.1.7 on Solaris 9x86
I installed oracle 8.1.7 on Solaris 9x86, all is fine.
But I dont see any where that I could use isqlplus through nestcape.
Is there any way that I could start isqlplus through my browser.
Please help!!!You mean that I can install isqlplus from oracle9i into my oracle8.1.7.You would need to install into a new Oracle9i-only directory (i.e. a
new ORACLE_HOME). The iSQL*Plus in it would be able to connect to
your existing 8.1.7 database using Oracle Net.
Unfortunately I see 9i is not supported on Solaris x86 (though 10g is
"projected".)
The French iSQL*Plus 8.1.7 document you refer to talks about the first
pre-production version of iSQL*Plus released. It cannot be
recommended for use, and is no longer available.
-- CJ -
Install oracle 8.1.7 on Solaris(x86) 10 b72
Has anyone Installed oracle 8.1.7 on Solaris(x86) 10 b72???
When I run runInstaller I have
135$ Initializing Java Virtual Machine from ../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/jre. Please wait...
ld.so.1: /ora_inst/stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/i386/native_threads/jre: fatal: relocation error: file /ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so)
ld.so.1: /ora_inst/stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/i386/native_threads/jre: fatal: relocation error: file /ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so)
java.lang.UnsatisfiedLinkError:try this:
LD_PRELOAD="libX11.so libXext.so" ; export LD_PRELOAD
./runInstaller -
Can I install Oracle 8.1.7 on solaris 2.8
We have a working product which uses oci 7.x calls on solaris 2.7 OS and the oracle version is 8.1.7.
But when we installed oracle 8.1.7 on solaris 2.8 OS , We are unable to connect to Oracle data base using the same executables.
My question is : --- Is oracle 8.1.7 is supported on solaris 2.8 OS ?
thanks and regardsYes! We made it only in 1 month, but now it works fine.
greets
hgs -
Oracle 8.1.6 on Solaris (SPARC) & EJB's
Hi all,
I would like to know if anybody is successfully using Oracle 8.1.6 on Solaris (SPARC) and EJB's or any other JServer Technology? If you have any advice for implementing JServer technologies on Solaris, please feel free to elaborate.
Thanks in advance,
Rob
nullCould you tell us how to do that????
We all met the ORA-01034 problem!
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Wile E. Coyote:
Yes, that's no problem
I've installed 8.1.6 on several machines running Solaris 8 without any problem<HR></BLOCKQUOTE>
null -
Install Oracle 8.1.7 in Solaris, disk space problems.
Hi!
I'm installing Oracle 8.1.7 in Solaris (typical instalation, Entrepise Edition).In addition, I have created two directories (/u01 and /u02).I would like to store Oracle Software in /u01 and I would like store my database in /u02.During instalation have been appeared a problem, I only have in / 650 Mbytes availables and Oracle requests 750 Mbytes. How Could I have more space in /?
With best wishes.
Jordi.You may try to add the environment variable
ORACLE_TERM=vt100 which is not include in your envornment setting. -
Hi all,
I am in the process of installing Oracle 8.1.5 on Solaris 2.6.
While installing Oracle, it gives the following error and abruptly stops installation.
java.lang.ClassNotFoundException : OiQueryFileRes occurred..
I have intstalled 105181-23 kernel update patch and ORCLudlm package which is provided in in oracle cd.
I will deeply appreciate your ideas.
Thanks,
Raghu.Hi all,
I hope I am not alone in facing this problem.
Would greatly appreciate any suggestions from you.
Thanks,
Raghu. -
Oracle 8.1.7 on Solaris 8
hi everyone,
I am totally new to Oracle ... just finished installation
of Oracle 8.1.7 on Solaris 8 .. the automatic database
creation step failed for some reason.
Now when I try to use dbassist to create a new database,
I get an ORA 03114 error "not connected to ORACLE".
It does create the database creation shell scripts, so I
tried manually executing those scripts and the following
sequences of events ensued.
SVRMGR> connect internal
Connected.
SVRMGR> startup nomount pfile = "/opt/oracle/admin/B/pfile/initB.ora"
ORA-03113: end-of-file on communication channel
SVRMGR>
Any idea on what could be going on ... any help is appreciated ... the quicker
the better as this is holding a lot of work back on our research.
thanks
Jasu must change ur ORACLE_SID in ur profile
-
Problems to install Oracle SOA Suite 11g on Solaris 10 SPARC-64
I'm trying to install the Oracle SOA Suite 11g on Solaris 10 SPARC-64 but I´m having problems.
I have already installed the JDK 1.6_11 for 64 bits and I use it for the SOA installation, the instruction is:
./runInstaller -jreLoc /export/home/adminsoa/Java1.6_11/jdk1.6.0_11
I'm providing the absolute path to ensure take the correct JDK (JDK 64 bits).
But I get the following error:
bash-3.00$ ./runInstaller -jreLoc /export/home/adminsoa/Java1.6_11/jdk1.6.0_11
Starting Oracle Universal Installer...
Checking if CPU speed is above 300 MHz. Actual 1500 MHz Passed
Checking Temp space: must be greater than 150 MB. Actual 5291 MB Passed
Checking swap space: must be greater than 500 MB. Actual 39311 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-01-26_03-17-44PM. Please wait ...bash-3.00$ Log: /home/oracle/oraInventory/logs/install2010-01-26_03-17-44PM.log
[ERROR]: Installer has encountered an internal Error. Contact Oracle support with details
[EXCEPTION]:java.lang.reflect.InvocationTargetException
I reviewed the log install2010-01-26_03-17-44PM.out and displays the following:
Adding /tmp/OraInstall2010-01-26_03-17-44PM for deletion.
Adding to classpath:file:/tmp/OraInstall2010-01-26_03-17-44PM/ext/jlib/soawl.jar
Adding to classpath:file:/tmp/OraInstall2010-01-26_03-17-44PM/ext/jlib/template.jar
[email protected]creenRes
java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-01-26_03-17-44PM/oui/lib/solaris/liboraInstaller.so: ld.so.1: java: fatal: /tmp/OraInstall2010-01-26_03-17-44PM/oui/lib/solaris/liboraInstaller.so: wrong ELF class: ELFCLASS64 (Possible cause: architecture word width mismatch)
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1778)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1674)
at java.lang.Runtime.load0(Runtime.java:770)
at java.lang.System.load(System.java:1005)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:402)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:125)
at oracle.as.install.engine.modules.statistics.util.SysInfo.getAvailableMemory(SysInfo.java:161)
at oracle.as.install.engine.modules.statistics.element.AvailableMemoryElement.<init>(AvailableMemoryElement.java:39)
at oracle.as.install.engine.modules.statistics.standard.StandardElementLocator.loadElements(StandardElementLocator.java:63)
at oracle.as.install.engine.modules.statistics.boot.ProfilerInitializer.initializeProfile(ProfilerInitializer.java:82)
at oracle.as.install.engine.modules.statistics.Statistics.launchModule(Statistics.java:284)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.as.install.engine.InstallEngine.launchModule(InstallEngine.java:508)
at oracle.as.install.engine.InstallEngine.processAndLaunchModules(InstallEngine.java:462)
at oracle.as.install.engine.InstallEngine.startOperation(InstallEngine.java:415)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:446)
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.as.install.engine.InstallEngine.launchModule(InstallEngine.java:508)
at oracle.as.install.engine.InstallEngine.processAndLaunchModules(InstallEngine.java:462)
at oracle.as.install.engine.InstallEngine.startOperation(InstallEngine.java:415)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:446)
Caused by: java.lang.UnsatisfiedLinkError: no oraInstaller in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1709)
at java.lang.Runtime.loadLibrary0(Runtime.java:823)
at java.lang.System.loadLibrary(System.java:1030)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:420)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:125)
at oracle.as.install.engine.modules.statistics.util.SysInfo.getAvailableMemory(SysInfo.java:161)
at oracle.as.install.engine.modules.statistics.element.AvailableMemoryElement.<init>(AvailableMemoryElement.java:39)
at oracle.as.install.engine.modules.statistics.standard.StandardElementLocator.loadElements(StandardElementLocator.java:63)
at oracle.as.install.engine.modules.statistics.boot.ProfilerInitializer.initializeProfile(ProfilerInitializer.java:82)
at oracle.as.install.engine.modules.statistics.Statistics.launchModule(Statistics.java:284)
... 8 more
[ERROR]: Installer has encountered an internal Error. Contact Oracle support with details
[EXCEPTION]:java.lang.reflect.InvocationTargetException
I think that the error would be caused by the JDK version with which try to initializing.
Anyone have any idea about the possible error? Thanks in advance.Hi, I encourage you to try to use the generic installer at: %SOA_INSTALLER_DIR%/Disk1/runInstaller. Because if you are using the runInstaller at %SOA_INSTALLER_DIR%/Disk1/install/solaris it will lead to that problem in some cases.
-
What differences where implemented to Oracle 10G Clients ODBC connectivity drivers between 10G Release 1 and Release 2 concerning datatypes?
I have an application that performs a qualified read returning a group of records (this is successful) and then performs a delete on each record read. No errors occur on completion of the application. When using release 1, the records are physically removed. Using release 2 a portion of the same group of records are not removed. The key for the table is a numeric field with six decimal places (not my design). My applications C code defines the field as a DOUBLE.I certainly agree that something changed. The question is whether it was a change in function or not. With a lot of these sorts of errors, tracking down the "source" of the error involves finding a change in a piece of code that allowed what was always possible to actually occur. That is, you may have two pieces of code that are functionally identical but that end up allowing the sorts of "round off" errors that are always possible when using doubles. The driver might, for example, now be going down a code path where it shifts a number to the right or left rather than dividing or multiplying by 2, which may make this sort of thing more likely. Functionally, given that doubles don't guarantee infinite precision, these operations are identical, but one may be significantly more likely to cause problems.
Is your application using the ODBC API directly? Or is it going through a higher-level API? If you are going through ODBC directly, you might look to see whether the data types that are being returned by the driver to your code are the same across driver versions.
Justin -
I have to migrate and upgrade database from Oracle 10.2.0.3 (Solaris) to 11.2.0.3 (Linux). I know I can use datapump and TTS to migrate data. My steps would be Install oracle 11.2.0.3 binaries on Linux box and create the database with same name on Solaris box and imp the data. My question is If I import the data from 10.2 DB, Will I face any issue or any problem besides invalid objects ?????? Or can you give brief steps.???? Any help will be appreciated ..
ThanksLaserSoft wrote:
Hi Friend
Five Methods..
1) Database Upgrade Assistant (DBUA)
2) Manual UpgradeDBUA and manual upgrade scripts can only be used when there is no platform change. If a platform change is included, the data will have to be moved across OS versions using one of the 3 methods below.
3) Export/Import
4) Data Copying
5) Golden Gate
Note 1 : Export/Import works for all versions. But for 10g and above, DataPump or Transportable Table Spaces methods are better.
Note 2 : you may need to perform additional pre-upgrade steps (adjust the parameter file for the upgrade, remove obsolete initialization parameters and adjust initialization parameters that might cause upgrade problems).
Thanks
LaserSoftHTH
Srini
Maybe you are looking for
-
My wife and I both have iPhones and want to know if we can keep the same itunes account while keeping our contacts and calendars separate?
-
Error While Creating Grant Master
Hi, I am getting the error while creating the Grant Master.Kindly Help me The Error Messages: The special grant NOT RELEVANT (dummy grant) is automatically created(Message no. GMMASTERDATA111) Cannot get grant defaults for sponsor 0000600000(Mes
-
When dragging pre made music score to video clip the download will fail every tim due to unavailable server or not connected to internet.
-
Error in Adding Mac Address in WLAN
Hi, We have multiple wlan's here in our Company. Im having trouble with mac addresses which I registered BEFORE via mac filter and DELETED it after couple of days. Right now, I need to register this mac addresses again via MAC Filter but error appea
-
Intensity Pro not recognized within CS5.0.3
Had to format the drive. Adobe CS 5 Production Premium Windows 7 64bit Quad-core 12gb ram 2 raid 0 + system drive All adobe software is up to date. All physical connections checked and re-checked. Using composite from a VCR. Installed software for In