Oracle 11g install failure, error, Failed to allocate port(s)

I'm having a very hard time reinstalling Oracle 11gR1 x64 bit after the hard drive where I first installed it failed and had to be replaced. The database I'm trying to setup is for personal use on this system only. I'm running Windows XP professional 64 bit edition and have .net framework version 1.1.4322.573 installed.
During installation the process hangs at the Database Configuration Assistant stage and will not progress till I manually end the lsnrctl.exe process in taskmanager. During the completing database process at the end I get this error -
SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
My first thoughts were the ports in question were in use or closed but I've been using both netbios and a port monitor program called currports to check and as far as I can tell the ports listed are open and not in use.
I did reconfigure the tnsnames.ora and listener.ora files to include valid port addresses (1521) and I can get the lsnrctl.exe to start manually now but still can't connect to the database using an open SQL command prompt.
I also tried running the emca.bat but still no change. I need help, I'm beating my head against the wall now.
Here are my etc/hosts, etc/services, and emconfig.log files
etc/hosts
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
172.23.153.30 gcihq1

emconfig.log
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-migrate' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateFromDBControl' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateToCentralAgent' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateFromCentralAgent' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateToDBControl' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-migrate' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateFromDBControl' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateToCentralAgent' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateFromCentralAgent' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateToDBControl' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: LOG_FILE value: G:\MainDB\cfgtoollogs\dbca\MainDB\emConfig.log
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: HOST value: gcihq1
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: PORT value: 1521
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SID value: MainDB
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: LISTENER value: LISTENER
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: LISTENER_OH value: G:\MainDB\DBHousing
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-config' set to true
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'db' set to true
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: EM_HOME value: G:\MainDB\DBHousing
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: MainDB
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: MainDB
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: ORACLE_HOME value: G:\MainDB\DBHousing
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'dbcontrol' set to true
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'UPDATE_EMAIL' set to false
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-backup' set to false
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'create' set to false
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig addEMCALogFile
CONFIG: ORACLE_BASE :G:\MainDB
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file G:\MainDB\cfgtoollogs\emca\emca_2010_03_22_17_48_04.log to G:\MainDB\cfgtoollogs\emca\MainDB\emca_2010_03_22_17_48_04.log
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at G:\MainDB\cfgtoollogs\dbca\MainDB\emConfig.log.
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
CONFIG: isCRSInstalled: false
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'CHECK_CONFIG' set to true
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: DBSNMP
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
CONFIG: No service name available. Will try to set db_unique_name.db_domain
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value:
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: MainDB
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: MainDB
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: MainDB
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBID.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getDbid
CONFIG: No dbid available. Will query db to extract it.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBID value: 1536995688
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYSMAN
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: MainDB
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file G:\MainDB\DBHousing\sysman\config\emd.properties to G:\MainDB\DBHousing\sysman\config\emd.properties.emca.tmp
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file G:\MainDB\DBHousing\sysman\config\emd.properties has been copied to G:\MainDB\DBHousing\sysman\config\emd.properties.emca.tmp
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file G:\MainDB\DBHousing\sysman\config\emoms.properties to G:\MainDB\DBHousing\sysman\config\emoms.properties.emca.tmp
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file G:\MainDB\DBHousing\sysman\config\emoms.properties has been copied to G:\MainDB\DBHousing\sysman\config\emoms.properties.emca.tmp
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file G:\MainDB\DBHousing\sysman\emd\targets.xml to G:\MainDB\DBHousing\sysman\emd\targets.xml.emca.tmp
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file G:\MainDB\DBHousing\sysman\emd\targets.xml has been copied to G:\MainDB\DBHousing\sysman\emd\targets.xml.emca.tmp
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
CONFIG: isCRSInstalled: false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: Cluster.isCluster: false. Skip call to getLocalNode
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: MainDB Host: 172.23.153.30 Node: null OH: G:\MainDB\DBHousing agentHome: null isCentral: false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: MainDB Host: 172.23.153.30 Node: null OH: G:\MainDB\DBHousing isDBC: false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: MainDB Host: 172.23.153.30 Node: null OH: G:\MainDB\DBHousing isDBC: false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_MainDB.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_MainDB.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_MainDB.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_MainDB.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [G:\MainDB\DBHousing]
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME G:\MainDB\DBHousing
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from G:\MainDB\DBHousing\oc4j\j2ee\OC4J_DBConsole
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from G:\MainDB\DBHousing\oc4j\j2ee\OC4J_DBConsole
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from G:\MainDB\DBHousing\oc4j\j2ee\OC4J_DBConsole
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from G:\MainDB\DBHousing\sysman\config\emd.properties
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file G:\MainDB\DBHousing\install\staticports.ini
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
Refer to the log file at G:\MainDB\cfgtoollogs\dbca\MainDB\emConfig.log for more details.
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
     at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2481)
     at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:744)
     at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:251)
     at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:178)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:221)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
     at java.lang.Thread.run(Thread.java:595)
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
------------------------------------------------------------------------------------------------------------------------------

Similar Messages

Failed to allocate port(s) in the specified range(s) for the following....

Hi,
I'm attempting to install oracle 10.2.0 on Solaris 10.
When I create a database i get the error:
Failed to allocate port(s) in the specified range(s) for the following process(es): .....
So I look at the logs and there looks like to be some configuration issues but i'm not sure where to start.
I've changed the port from NULL to 1521 in listener.ora.
It worried me that it was set to null.
Ive tried running emca -config -all db ( not sure what central agent home should be set it as /app/oracle/product/10.2.0/Db_1 seemed to accept that)
This gives me the same above error.
Any help is greatly appreciated. Please note im both a novice solaris and oracle user
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /app/oracle/product/10.2.0/Db_1/cfgtoollogs/dbca/test2/emConfig.log.
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'CHECK_CONFIG' set to true
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: DBSNMP
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
CONFIG: No service name available. Will try to set db_unique_name.db_domain
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value:
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: test2
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: test2
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: test2
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbid
CONFIG: No dbid available. Will query db to extract it.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBID value: 691205234
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYSMAN
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: test2
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /app/oracle/product/10.2.0/Db_1/sysman/config/emd.properties to /app/oracle/product/10.2.0/Db_1/sysman/config/emd.prop
erties.emca.tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /app/oracle/product/10.2.0/Db_1/sysman/config/emd.properties has been copied to /app/oracle/product/10.2.0/Db_1/s
ysman/config/emd.properties.emca.tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /app/oracle/product/10.2.0/Db_1/sysman/config/emoms.properties to /app/oracle/product/10.2.0/Db_1/sysman/config/emoms.
properties.emca.tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /app/oracle/product/10.2.0/Db_1/sysman/config/emoms.properties has been copied to /app/oracle/product/10.2.0/Db_1
/sysman/config/emoms.properties.emca.tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /app/oracle/product/10.2.0/Db_1/sysman/emd/targets.xml to /app/oracle/product/10.2.0/Db_1/sysman/emd/targets.xml.emca.
tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /app/oracle/product/10.2.0/Db_1/sysman/emd/targets.xml has been copied to /app/oracle/product/10.2.0/Db_1/sysman/
emd/targets.xml.emca.tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: test2 Host: honeyeater Node: null OH: /app/oracle/product/10.2.0/Db_1 agentHome: null isCentral: false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: test2 Host: honeyeater Node: null OH: /app/oracle/product/10.2.0/Db_1 isDBC: false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: test2 Host: honeyeater Node: null OH: /app/oracle/product/10.2.0/Db_1 isDBC: false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_test2.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_test2.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_test2.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_test2.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /app/oracle/product/10.2.0/Db_1/oui
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [app/oracle/product/10.2.0/Db_1]
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /app/oracle/product/10.2.0/Db_1
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from /app/oracle/product/10.2.0/Db_1/oc4j/j2ee/OC4J_DBConsole
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from /app/oracle/product/10.2.0/Db_1/oc4j/j2ee/OC4J_DBConsole
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from /app/oracle/product/10.2.0/Db_1/oc4j/j2ee/OC4J_DBConsole
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from /app/oracle/product/10.2.0/Db_1/sysman/config/emd.properties
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /app/oracle/product/10.2.0/Db_1/install/staticports.ini
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Contro
l [5500-5519],EM Agent [3938] | [1830-1849]
Refer to the log file at /app/oracle/product/10.2.0/Db_1/cfgtoollogs/dbca/test2/emConfig.log for more details.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [55
40-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2266)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:426)
at java.lang.Thread.run(Thread.java:534)
Also got thie error in another log
Cluster Error Message: PRKH-1010 : Unable to communicate with CRS Services

thanks mathias,
but i have already done, netstat -na |grep portnumber
but nothing no port in range are set
thanks howevar
regards

11g Install Failure, Listener Error.

11g Install Failure, Listener.
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor.
I am attempting to install 11g, 11.1.0 onto a stand alone box which has Windows XP SP2 as the OS.
The box is at present not networked and as is not on a domain. The computer name is homedb.
I have installed the loopback adapter on 10.10.10.10 and updated my hosts file, the computer can resolve this to the computer name and vice versa.
Upon installing 11g and the starter database, the install continues normally, succeeding with the Oracle Net Configuration Assistant. However when the Oracle Database Configuration Assistant is run, 89% of the way through an error is thrown as follows:
Enterprise manager configuration failed due to the following error -
Listener is not up. Start the listener and run EM configuration again.
Refer to the log file at C:\Oracle\cfgtoollogs\dbca\emConfig. Log for more details.
You can retry configuring this database with Enterprise Manager later by manually running C:\Oracle\product\11.1.0\db_1\bin\emca script.
When I click ok on the error message the install completes as normal.
I can TNSPING orcl which results in the following:
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 20-JAN-2
008 12:36:33
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
C:\oracle\product\11.1.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(
PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))
OK (20 msec)
I can connect to the database using sqlplus sys/password as sysdba but when I try to connect using
sqlplus sys@orcl and typing in the password I get the following error:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor.
This is also the error I get when using sql developer to connect to the db.
The extract from the log file mentioned above is as follows:
20-Jan-2008 12:14:09 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
20-Jan-2008 12:14:09 oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1530)
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1771)
     at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2708)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:368)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
     at java.lang.Thread.run(Thread.java:595)
20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up. Start the Listener and run EM Configuration Assistant again .
Refer to the log file at C:\oracle\cfgtoollogs\dbca\orcl\emConfig.log for more details.
20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up. Start the Listener and run EM Configuration Assistant again .
     at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2715)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:368)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
     at java.lang.Thread.run(Thread.java:595)
20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to C:\oracle\product\11.1.0\db_1\oui
My listener, tnsnames and sqlnet are as follows:
listener.ora:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(PORT = 1521))
sqlnet.ora:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
tnsnames.ora:
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
When logged into the database a SHOW PARAMETER SERVICE results in a service of orcl
Running the command: lsnrctl service, results in the following:
LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 20-JAN-2008 12:46
:52
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
The listener supports no services
The command completed successfully.
Running lsnrctl status results in the following:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Produ
ction
Start Date 20-JAN-2008 12:09:10
Uptime 0 days 0 hr. 40 min. 9 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\product\11.1.0\db_1\network\admin\listener.o
ra
Listener Log File c:\oracle\diag\tnslsnr\homedb\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=homedb)(PORT=1521)))
The listener supports no services
The command completed successfully
I have re run the db configuration again but it would not start because apparently there was no listener, running the Net Configuration Assistant makes no difference.
All firewalls and anti virus software have been disabled for the purposes of this install.
Do I need to manually register the listener with the database, if so how do I go about doing this?
I have installed 10g on a standalone box before with no trouble, what have I missed here?, any help greatly appreciated.

To answer my own question I fixed this by issuing the command
netsh winsocks reset
Winsocks deals with windows networking and can become corrupt through installs of software, virus cleaning, etc.
Hope that helps,
Adam

DO I NEED TO HAVE ORACLE 11G INSTALLED?

Hi,
I have never used Oracle before. I have a very basic doubt. I have a Peoplesoft Id and password. I wish to know if I need to have Oracle 11g installed on my laptop to be able to use Peoplesoft Code to create applications using an online database? Kindly let me know at the earliest and will be of great help.
I greatly appreciate it.
Thanks. :)

You need to have app designer installed if you want to work with peopletools, which will allow you to connect 3-tier to running Oracle/Peoplesoft instance. If you want to connect 2-tier, then you'll need the 11g client installed.

Crypto errors CTM ERROR: Failed to allocate x bytes of memory

Hi There.
I am currently getting a strange error when trying to use and crypto services on our ASA 5520 (8.0.3)
Initially I observed that a connected VPN had dropped.
Then when I attempted to use ASDM or SSH I was blocked.
In the end I opened telnet as a test and this was successful. Syslog also shows that traffic is passing as normal.
The only obvious error I can see when observing various debug traces is this;
FW02# CTM: rsa session with no priority allocated @ 0xCF1FBBA0
CTM: Session 0xCF1FBBA0 uses a nlite (Nitrox Lite) as its hardware engine
CTM: rsa context allocated for session 0xCF1FBBA0
CTM: rsa session with no priority allocated @ 0xCE7A5EA8
CTM: Session 0xCE7A5EA8 uses a nlite (Nitrox Lite) as its hardware engine
CTM: rsa context allocated for session 0xCE7A5EA8
CTM: rsa session with no priority allocated @ 0xCEF249D0
CTM: Session 0xCEF249D0 uses a nlite (Nitrox Lite) as its hardware engine
CTM: rsa context allocated for session 0xCEF249D0
CTM: dh session with no priority allocated @ 0xCEF249D0
CTM: Session 0xCEF249D0 uses a nlite (Nitrox Lite) as its hardware engine
CTM: dh context allocated for session 0xCEF249D0
CTM ERROR: Failed to allocate 279 bytes of memory, ctm_nlite_generate_dh_key_pair:183
Has anyone seen anything like this before as I am lost?
Mike

Thanks for that. It does look like its out of crypto memory...
DMA memory:
   Unused memory:                 23849516 bytes (30%)
   Crypto reserved memory:        20537556 bytes (26%)
     Crypto free:                       0 bytes ( 0%)
     Crypto used:                20537556 bytes (26%)
   Block reserved memory:         34669024 bytes (44%)
     Block free:                 30734752 bytes (39%)
     Block used:                  3934272 bytes ( 5%)
   Used memory:                     185120 bytes ( 0%)
Unless there is a way to specifically restart only the crypto engine or clear crypto memory then I guess I am looking at a reload?
Mike

Can oracle 11g installed on solaris 8 ?

Can oracle 11g installed on solaris 8 ?
Other what is the minimum solaris supported to install oracle 11g.
Thank you in advance..

[email protected] wrote:
Can oracle 11g installed on solaris 8 ?
Other what is the minimum solaris supported to install oracle 11g.
Thank you in advance..In general, each product has an installation manual - found through http://docs.oracle.com and possibly http://tahiti.oracle.com and the install manual clearly identifies the (minimum) support OS and Release information.

Emca: Failed to allocate port(s) in the specified range...

Hi,
this is Suse Professional 9.2 and Oracle 10.1.0.3.
When we try to start emca to configure the enterprise manager manually, we get the error message:
SEVERE: Failed to allocate port(s) in the specified range for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM agent [1830-1849]
But those ports are not in use...
Anyone experienced the same thing?
./emca
STARTED EMCA um Thu Mar 17 14:34:24 CET 2005
Geben Sie die folgenden Informationen fÃÂ¼r die zu konfigurierende Datenbank ein
Listener-Port-Nummer: 1521
Datenbank-SID: fhoracle
Service-Name: fhoracle
E-Mail-Adresse fÃÂ¼r Benachrichtigung: ff
E-Mail-Gateway fÃÂ¼r Benachrichtigung: ff
Kennwort fÃÂ¼r dbsnmp:
Kennwort fÃÂ¼r sysman:
Kennwort fÃÂ¼r sys: :
Sie haben die folgenden Einstellungen angegeben
ORACLE_HOME von Datenbank ................ /home/fhserver/product/10.1.0/Db_2
ORACLE_HOME von Enterprise Manager ................ /home/fhserver/product/10.1.0/Db_2
Host-Name von Datenbank ................ linux.site
Listener-Port-Nummer ................ 1521
Datenbank-SID ................ fhoracle
Service-Name ................ fhoracle
E-Mail-Adresse fÃÂ¼r Benachrichtigung ............... ff
E-Mail-Gateway fÃÂ¼r Benachrichtigung ............... ff
MÃÂ¶chten Sie fortfahren? [ja/nein]: ja
17.03.2005 14:34:50 oracle.sysman.emcp.EMConfig checkParameters
SCHWERWIEGEND: Failed to allocate port(s) in the specified range for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM agent [1830-1849]
Die Konfiguration konnte nicht abgeschlossen werden. Weitere Einzelheiten finden Sie in der Log-Datei
Thanks,
Helmut

Hi,
I'm joining this thread late as I've just encountered the same problem.
None of the ports specified in the error message are in the etc/services file, and none of them are in use according to netstat either. sysctl.conf and ip_local_port_range are both correct too.
SEVERE: Failed to allocate port(s) in the specified range for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM agent [1830-1849]
Werner Puschitz has something about this on his Suse installation page in the Troubleshooting section (http://www.puschitz.com/InstallingOracle10gOnSUSE.shtml ) , but is does not seem to have got into his Red Hat page:
The problem is that ports listed in /etc/services are discounted.
The workaround is to specify the ports manually, see emca -h.
Use the following options and use the port ranges as specified in the above error message:
emca -RMI_PORT <port> -JMS_PORT <port> -AGENT_PORT <port> -DBCONSOLE_HTTP_PORT <port>
so it may be worth giving that a try.

Oracle 11g clusterware VIP failover failed

I installed Oracle 11g Clusterware succesfully, without any errors as per link:
http://www.oracle-base.com/articles/11g/OracleDB11gR1RACInstallationOnRHEL5UsingVMwareESXAndNFS.php
After that,I did vip failover test
I rebooted the node-2
Before reboot,
[root@advansrac1 bin]# ./crs_stat -t
Name Type Target State Host
ora....ac1.gsd application ONLINE ONLINE rac1
ora....ac1.ons application ONLINE ONLINE rac1
ora....ac1.vip application ONLINE ONLINE rac1
ora....ac2.gsd application ONLINE ONLINE rac2
ora....ac2.ons application ONLINE ONLINE rac2
ora....ac2.vip application ONLINE ONLINE rac2
After reboot,
Name Type Target State Host
ora....ac1.gsd application ONLINE ONLINE rac1
ora....ac1.ons application ONLINE ONLINE rac1
ora....ac1.vip application ONLINE ONLINE rac1
ora....ac2.gsd application ONLINE ONLINE rac2
ora....ac2.ons application ONLINE ONLINE rac2
ora....ac2.vip application ONLINE UNKNOWN rac1
[root@rac1 bin]# ./crs_stop ora.rac2.vip
Attempting to stop `ora.rac2.vip` on member `advansrac1`
Stop of `ora.rac2.vip` on member `advansrac1` succeeded.
[root@rac1 bin]# ./crs_stat -t
Name Type Target State Host
ora....ac1.gsd application ONLINE ONLINE rac1
ora....ac1.ons application ONLINE ONLINE rac1
ora....ac1.vip application ONLINE ONLINE rac1
ora....ac2.gsd application ONLINE ONLINE rac2
ora....ac2.ons application ONLINE ONLINE rac2
ora....ac2.vip application OFFLINE OFFLINE
[root@rac1 bin]# ./crs_start ora.rac2.vip
Attempting to start `ora.rac2.vip` on member `rac2`
Start of `ora.rac2.vip` on member `rac2` succeeded.
[root@rac1 bin]# ./crs_stat -t
Name Type Target State Host
ora....ac1.gsd application ONLINE ONLINE rac1
ora....ac1.ons application ONLINE ONLINE rac1
ora....ac1.vip application ONLINE ONLINE rac1
ora....ac2.gsd application ONLINE ONLINE rac2
ora....ac2.ons application ONLINE ONLINE rac2
ora....ac2.vip application ONLINE ONLINE rac2
I have only 1.5G on each node
Here the issue is,
1. Actual Result: # During failover why it is showing UNKNOWN state for ora.rac2.vip on member rac1
Expected Result: # During failover,it have to be ONLINE state for ora.rac2.vip on member rac1
2. I have to start ora.rac2.vip manually, when node-2 is up.I want VIP fail over have to happen automatically when node-2 is up to normal online state.
Help me out from this issue

VMware is unsupported but that is likely not your issue.
1. Run cluster verify and report the results
2. Did you create a failover service? How?
3. Post your TNSNAMES.ORA

Oracle 11g Database Prerequisites Check Failed

hi all, i need to install the oracle 11g database on my D drive but the check was failed where the check take place in C drive. Therefore, i just skipped it.
I do meet all the requirement but still failed, why ?
During the oracle database 11g, there are some components which cannot be found like em.war, em.ear, drluln.sql.sbs, system-application.xml, system-jazz-data.xml .
What is the error about ?
Is it possible to install ?
Thanks.
Edited by: peterwkc on Mar 19, 2011 3:19 AM

schavali wrote:
Pl post details of your OS version, along with which 11g version you are trying to install. Are you following the steps in the official installl Guides - http://www.oracle.com/technetwork/database/enterprise-edition/documentation/database-093888.html ?
I am not sure why you are acting surprised that the install was not successful when you are ignoring install warnings/errors :-)
As indicated in the thread link above, have you downloaded and unzipped both of the install zip files into the same directory ?
Pl also post relevant sections from the install log that show what prereq checks have failed.
HTH
SriniI copied the disk 2 component into disk 1 component folder where the installation is successful but prerequiresite still failed where i just ignore where i have set all the env variable.
By the way, thanks for your reply.

Oracle 11g install hangs on windows 7

Hi,
I have downloaded Oracle 11g r2 64 bit install onto my windows system.
When i install, the install hangs after selecting the following
a) Create and configure a database
b) Desktop Class
After these, when I click on Next, the UI hangs.
Help will be appreciated.

Using paramFile: C:\Users\jeevan\Documents\My DAP Downloads\database\install\oraparam.ini
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_StarterDatabaseType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: Failed to load bean oracle.install.ivw.db.bean.DBInstallSettings. Reason: [INS-07001] Value for property 'DBInstallSettings' not found in the bean store.
INFO: Closing bean stores from which the beans can be loaded
INFO: Registering the flow views
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.PrereqGUI added to View Type Registry with the key as [PrereqUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SummaryGUI added to View Type Registry with the key as [SummaryUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SetupGUI added to View Type Registry with the key as [SetupUI]
INFO: Adding View[type: oracle.install.ivw.common.view.InventoryUI viewId: null uiType: null]
INFO: oracle.install.ivw.common.view.InventoryUI added to View Type Registry with the key as [InventoryUI]
INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
INFO: oracle.install.ivw.common.view.ProductLanguageGUI added to View Type Registry with the key as [ProductLanguageUI]
INFO: Adding View[type: oracle.install.ivw.common.view.OCMDetailsGUI viewId: OCMDetailsUI uiType: null]
INFO: oracle.install.ivw.common.view.OCMDetailsGUI added to View Type Registry with the key as [OCMDetailsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ConfigurationTypeUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.ConfigurationTypeUI added to View Type Registry with the key as [ConfigurationTypeUI]
INFO: Adding View[type: oracle.install.ivw.db.view.DBIdentifierUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.DBIdentifierUI added to View Type Registry with the key as [DBIdentifierUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ConfigurationOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.ConfigurationOptionsUI added to View Type Registry with the key as [ConfigurationOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ManagementOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.ManagementOptionsUI added to View Type Registry with the key as [ManagementOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.StorageOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.StorageOptionsUI added to View Type Registry with the key as [StorageOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.RecoveryBackupUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.RecoveryBackupUI added to View Type Registry with the key as [RecoveryBackupUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ASMDiskGroupSelectionGUI viewId: ASMDiskGroupSelectionUI uiType: null]
INFO: oracle.install.ivw.db.view.ASMDiskGroupSelectionGUI added to View Type Registry with the key as [ASMDiskGroupSelectionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.SchemaPasswordUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.SchemaPasswordUI added to View Type Registry with the key as [SchemaPasswordUI]
INFO: Adding View[type: oracle.install.ivw.db.view.QuickInstallUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.QuickInstallUI added to View Type Registry with the key as [QuickInstallUI]
INFO: Adding View[type: oracle.install.ivw.db.view.InstallOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.InstallOptionsUI added to View Type Registry with the key as [InstallOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.SystemClassUI viewId: SystemClassUI uiType: null]
INFO: oracle.install.ivw.db.view.SystemClassUI added to View Type Registry with the key as [SystemClassUI]
INFO: Adding View[type: oracle.install.ivw.db.view.InstallLocationUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.InstallLocationUI added to View Type Registry with the key as [InstallLocationUI]
INFO: Adding View[type: oracle.install.ivw.db.view.DBEditionGUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.DBEditionGUI added to View Type Registry with the key as [DBEditionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.NodeSelectionUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.NodeSelectionUI added to View Type Registry with the key as [NodeSelectionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.FinishUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.FinishUI added to View Type Registry with the key as [FinishUI]
INFO: Adding View[type: oracle.install.ivw.db.view.PrivilegedOSGroupsGUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.PrivilegedOSGroupsGUI added to View Type Registry with the key as [PrivilegedOSGroupsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.InstallTypeGUI viewId: installTypeUI uiType: null]
INFO: oracle.install.ivw.db.view.InstallTypeGUI added to View Type Registry with the key as [installTypeUI]
INFO: Initial values of Setup Properties :
PROPERTY VALUE
CLUSTER_NODES {}
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
DECLINE_SECURITY_UPDATES false
FROM_LOCATION C:\Users\jeevan\Documents\My DAP Downloads\database
\install\../stage/products.xml
INSTALL_TYPE EE
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE
ORACLE_HOME
ORACLE_HOSTNAME COSMOS
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en"}
b_rdbmsInstall true
oracle.install.db.isCCRAuthenticationUsed false
oracle_install_LaunchNetCA false
oracle_install_NoMigration false
oracle_install_OCR_PartitionLocation
oracle_install_RACInstall false
oracle_install_RDBMSInstalling true
oracle_install_client_OraMTSPortNumber 49157
oracle_install_db_ASMSNMPUserPassword Protected value, not to be logged
oracle_install_db_AutoMemoryOption false
oracle_install_db_CharSetOption 3
oracle_install_db_CharacterSet
oracle_install_db_ConfigTabSelected 0
oracle_install_db_ConfigurationType &General Purpose / Transaction Processing
oracle_install_db_CustomInstall false
oracle_install_db_DiskGroupName
oracle_install_db_DiskGroupNameForASM
oracle_install_db_EMCentralAgentSelected
oracle_install_db_EMEmailAddress
oracle_install_db_EMSMTPServer
oracle_install_db_EnableAutoBackup false
oracle_install_db_InstallEdition EE
oracle_install_db_InstallOption INSTALL_DB_AND_CONFIG
oracle_install_db_InstallOptionSelected 1
oracle_install_db_InstallType EE
oracle_install_db_LaunchDBCA false
oracle_install_db_LaunchODMA false
oracle_install_db_LoadExampleSchemas false
oracle_install_db_MountPointLocation
oracle_install_db_QuickInstallOption false
oracle_install_db_ReceiveEmailNotification false
oracle_install_db_RecoveryBackUpLocation
oracle_install_db_RecoveryBackUpPassword Protected value, not to be logged
oracle_install_db_RecoveryBackUpUsername
oracle_install_db_SID
oracle_install_db_SecureConfigDisabled false
oracle_install_db_SetOracleBase false
oracle_install_db_StarterDatabaseType GENERAL_PURPOSE
oracle_install_db_StorageType 0
oracle_install_db_SuperAdminPasswords Protected value, not to be logged
oracle_install_db_SuperAdminSamePasswdForAll Protected value, not to be logged
oracle_install_db_SystemClass DESKTOP_CLASS
oracle_install_db_Type 1
oracle_install_db_UseDBControl true
oracle_install_db_UseFileSystemForRecovery false
oracle_install_db_UseSamePassword false
INFO: Launching Oracle Database 11g Release 2 Installer
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state prepInstall
INFO: Waiting for completion all forked tasks at state prepInstall
INFO: All forked task are completed at state prepInstall
INFO: Completed background operations
INFO: Executing action at state prepInstall
INFO: Completed executing action at state <prepInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prepInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prepInstall>
INFO: Completed validating view at state <prepInstall>
INFO: Validating state <prepInstall>
WARNING: Validation disabled for the state prepInstall
INFO: Completed validating state <prepInstall>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state decideOCMInstall
INFO: Completed executing action at state <decideOCMInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <decideOCMInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <decideOCMInstall>
INFO: Completed validating view at state <decideOCMInstall>
INFO: Validating state <decideOCMInstall>
WARNING: Validation disabled for the state decideOCMInstall
INFO: Completed validating state <decideOCMInstall>
INFO: Verifying route requireOCM
INFO: Get view named [OCMDetailsUI]
INFO: View for [OCMDetailsUI] is oracle.install.ivw.common.view.OCMDetailsGUI@6da05bdb
INFO: Initializing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed initializing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Displaying view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed displaying view <OCMDetailsUI> at state <getOCMDetails>
INFO: Loading view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed loading view <OCMDetailsUI> at state <getOCMDetails>
INFO: Localizing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed localizing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOCMDetails
INFO: Completed executing action at state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOCMDetails>
INFO: Completed validating view at state <getOCMDetails>
INFO: Validating state <getOCMDetails>
SEVERE: You have not provided an email address.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Is this the problem????
Do you wish to remain uninformed of critical security issues in your configuration?
INFO: Completed validating state <getOCMDetails>
INFO: Verifying route success
INFO: Get view named [InstallOptionsUI]
INFO: InstallOptionsUI Entering Constructor
INFO: InstallOptionsUI Exiting Constructor
INFO: View for [InstallOptionsUI] is oracle.install.ivw.db.view.InstallOptionsUI@5ea07440
INFO: Initializing view <InstallOptionsUI> at state <installOptions>
INFO: Completed initializing view <InstallOptionsUI> at state <installOptions>
INFO: Displaying view <InstallOptionsUI> at state <installOptions>
INFO: Completed displaying view <InstallOptionsUI> at state <installOptions>
INFO: Loading view <InstallOptionsUI> at state <installOptions>
INFO: Completed loading view <InstallOptionsUI> at state <installOptions>
INFO: Localizing view <InstallOptionsUI> at state <installOptions>
INFO: Completed localizing view <InstallOptionsUI> at state <installOptions>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state installOptions
INFO: Completed executing action at state <installOptions>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <installOptions>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: InstallOptions UI Entering & Exiting processInput
INFO: Validating view at state <installOptions>
INFO: Completed validating view at state <installOptions>
INFO: Validating state <installOptions>
INFO: Completed validating state <installOptions>
INFO: InstallOptionsAction Actions.transition called
INFO: selectedInstallOption is :INSTALL_DB_AND_CONFIG
INFO: launchNETCA = true
INFO: Verifying route system_class
INFO: Get view named [SystemClassUI]
INFO: SystemClassUI Entering Constructor
INFO: SystemClassUI Exiting Constructor
INFO: View for [SystemClassUI] is oracle.install.ivw.db.view.SystemClassUI@164ca42b
INFO: Initializing view <SystemClassUI> at state <getSystemClass>
INFO: Completed initializing view <SystemClassUI> at state <getSystemClass>
INFO: Displaying view <SystemClassUI> at state <getSystemClass>
INFO: Completed displaying view <SystemClassUI> at state <getSystemClass>
INFO: Loading view <SystemClassUI> at state <getSystemClass>
INFO: Completed loading view <SystemClassUI> at state <getSystemClass>
INFO: Localizing view <SystemClassUI> at state <getSystemClass>
INFO: Completed localizing view <SystemClassUI> at state <getSystemClass>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getSystemClass
INFO: Completed executing action at state <getSystemClass>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getSystemClass>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: SystemClassUI Entering & Exiting processInput
INFO: Validating view at state <getSystemClass>
INFO: Completed validating view at state <getSystemClass>
INFO: Validating state <getSystemClass>
INFO: Completed validating state <getSystemClass>
INFO: selectedSystemClass is :DESKTOP_CLASS
INFO: Verifying route desktop_class_yes
INFO: Get view named [QuickInstallUI]

Create workspace in Oracle 11g + APEX 2.2 fails

Anybody come across this one?
I have Oracle 11g database installed where I have removed APEX 3.0 and downgraded to APEX 2.2 (due to my clients not having upgraded yet).
I'm using the embedded PL/SQL gateway in the Oracle XML DB HTTP server.
Navigating to APEX login page and logging in as ADMIN is OK but when I want to create a new workspace (based on existing schema) it returns following error:-
ORA-20001: Request 824807541251920 could not be processed. -20001 ORA-20001: Unable to grant initial privs. ORA-20001: Error with: GRANT CREATE JOB TO "IPP" ORA-01031: insufficient privileges
I followed the post-installation steps that came with the installation guide of 11g but they really apply to APEX 3.0. Should I not have done that and instead followed the APEX 2.2 post-installation steps? Those are not clear however on configuring the embedded HTTP server.

SOLVED.
All I needed to do was log in as system and:-
GRANT CREATE JOB TO FLOWS_020200 WITH ADMIN OPTION
Not sure why it was missing though.

Oracle 11g XE - Installation Error

I am trying to install oracle xe 11g on my Win XP. The installation goes thru well. But when we start the database it starts too. However If I want to login it wont allow.
I tried to use connect using sys account as sysdba I get the following message:
Connected to an idle instance.
After some investigation I figured that there is a script that is not properly formatted in 'postDBCreation.sql". The following is the change that I found the error:
create spfile='C:\oraclexe\app\oracle\product\11.2.0\server\dbs/spfileXE.ora' FROM pfile='C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora';
This should have been like below
create spfile='C:\oraclexe\app\oracle\product\11.2.0\server\dbs\spfileXE.ora' FROM pfile='C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora';
After this change I tried to run XE.Bat file but it is throughing all kinds of SQL errors.
Can someone tell me what is wrong with this beta version of the Oracle 11g XE installation.
Lastly get started link also is not working too!!!
Thanks much in advance,
SB

user10958841 wrote:
I am trying to install oracle xe 11g on my Win XP. What "kind" of XP; SP? Edition? 32- or 64-bit?
I tried to use connect using sys account as sysdba I get the following message:
Connected to an idle instance.In that case,
C:\Users\Test>sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Beta on On Apr 27 00:01:01 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 598437888 bytes
Fixed Size                  1385180 bytes
Variable Size             268438820 bytes
Database Buffers          322961408 bytes
Redo Buffers                5652480 bytes
Database mounted.
Database opened.
SQL>
After some investigation I figured that there is a script that is not properly formatted in 'postDBCreation.sql". The following is the change that I found the error:
create spfile='C:\oraclexe\app\oracle\product\11.2.0\server\dbs/spfileXE.ora' FROM pfile='C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora';That forward slash is likely not causing any problem.
{code}
SQL> create spfile='?\dbs/spfile_justatest_fw_slash' FROM pfile='?\config\scripts\init.ora';
File created.
{code}
(sqlplus replaces ? with path of Oracle home.)
After this change I tried to run XE.Bat file but it is throughing all kinds of SQL errors.You need to re-install.
Lastly get started link also is not working too!!!See other threads in this forum on the similar subject (e.g. use Search Forum with keywords +get +started).
Edited by: orafad on Apr 27, 2011 12:20 AM
Edited by: orafad on Apr 27, 2011 12:32 AM

Oracle 11g Release 2 "error in moving file"

Hi there, right now I'm trying to install Oracle 11g release 2 64-bit on Windows 7 64 bit. about half-way through the installation i get an error message:
"error in moving file C:\app\dlee14\product\11.2.0\dbhome_1\bin\oralbac11.dll to C:\app\dlee14\product\11.2.0\dbhome_1\bin\oralbac11.dll.dbl"
what's going on and how do i fix it?

1010200 wrote:
Dear Team,
we are getting error while installing RAT( workload features)
Neither D:\oracle\app\product\11gRel2/bin/orarat11.dll.dbl nor D:\oracle\app\product\11gRel2/bin/orarat11.dll exist.
Therefore, the ORACLE_HOME is in an invalid state with respect to the option '
Please suggest :I suggest that instead of hijacking a two year old thread that is only tangentially related to your problem, that you start your own thread with as many of your specific details as you can muster.

Oracle EM Grid Control Error: Failed to run command in process

I am trying to change "Backup Settings". After entering the Host Credentials, when I click the OK button, I receive the following error message.
Validation Error
Examine and correct the following errors, then retry the operation:
Error - Connection to host as user <user> failed.ERROR: Failed to run command in process
Any Suggestions? Thanks in advance!

Hi,
If you are using linux/windows the hostname credentials should be the user who has installed the oracle 10g database software, if Windosw the user you are using need to be member of the ora_dba group and have Local Security privilege 'Log on as a batch job'.
What you need to do is go to start----> Programs----> admin tools----> Local security policy --->local policies ---> user rights assignments
In the list to your right, look for 'Log on as a batch job', double click and add the same OS local user you using to access OEM web to the group.
I hope this will solve your problem.
Cheers,
Francisco Munoz Alvarez
http://www.oraclenz.com

Oracle 11g install issues on Windows 7

I have had some problems installing Oracle on Windows 7 in that it seemed to crash while checking prerequisites. After several attempts it for some reason continued the installation. I had accepted the default settings and was installing from a USB drive to the same drive. The install did have a few error messages along the way such as "file not found. F:\app\ben\product\11.2.0\dbhome_2\oc4j\j2ee\oc4j_applications\applications\em.ear" and ""file not found. F:\app\ben\product\11.2.0\dbhome_2\ctx\admin\dr0ulib.sql.sbs". Also, towards the end it gave a message "Template General_Purpose.dbc does not exist. Please specify an existing template for database creation. <OK>". Despite these errors it seemed to successfully install. On the other hand I cannot log in to it as I attempt to try to set up some kind of basic database for myself. I go to the BIN directory and run sqlplus with "system" as the username and the password I had specified, but get the error "ORA-12560: TNS:protocol adapter error". Googling around a bit I tried to see if Oracle Services was running, but only saw OracleMTSRecoveryService and OracleRemExecService (and could not work out how to get any service running beyond what was listed there). I set up the path ORACLE_HOME to the BIN directory but there was not change in the situation. I just need a to set up a basic database on my PC so I can mess around with it. How can I get this going?
Thanks,
Ben

928175 wrote:
Hi i am study oracle sql server and i have some experience with mysql not with pl-sql an i ned to nkow what are the mininum system requarements to install oracle 11g and if some body of you ca tell to me what version of oracle ca i install in a 3.4 ghz CPU and 1512 Gb of ram only for learn i want this :) http://www.belvini.de/weingut/mID/861/moet-und-chandon.htm
Edited by: 928175 on Apr 17, 2012 4:24 AM
Edited by: 928175 on Apr 17, 2012 4:25 AMYou should not hijack someone else's thread for your own problems.
All installation requriements are found in the Installation Guides, under your particular product in the doc library at tahiti.oracle.com

Oracle 11g install failure, error, Failed to allocate port(s)

Similar Messages

Maybe you are looking for