Oracle 11g upgrade: How to update stale statistics for sys and sysman?

Hi,
I am in the process of testing Oracle 11g upgrade from Oracle 10.2.0.3. I have run utlu111i.sql on the 10g database.
The utility utlu111i.sql reports about the stale statistics for SYS and SYSMAN components.
I executed dbms_stats.gather_dictionary_stats; dbms_stats.gather_schema_stats('SYS'); and dbms_stats.gather_schema_stats('SYSMAN');
After that the utlu111i.sql still reports the stale statistics for sys and sysman. Does anyone know how to get rid off this warning successfully?
Thanks,
Sreekanth

Does anyone know how to get rid off this warning successfully?Just ignore the warnings. Check The Utlu111i.Sql Pre-Upgrade Script Reports Stale Sys Statistics - 803774.1 from Metalink.

Similar Messages

How to update standard lookup for name_prefix and name_suffix

We're using Fusion HCM 8.
Just at the beginning of some General Setup, we have the need to to add addtional values for name_prefix and name_suiffix.
Name_prefix is empty, wehn getting it, in name_Suffix are 3 values.
We're using the Setup Option "Manage Common Setup" and there the lookup type HRX_DE_NAME_PREFIX (SUFFIX).
For both the green plus is grayed and the Standard list is more or less empty.
Best solution for us will be getting a complete list in the lookups with the common values.
Additional it will e very helpful having the Chance to add/correct values.
Do we need other security rights for our implementation use?
Or do we have to open a SR, while fighting with a bug.
Many thanks for for all help

Both of these lookup types are of system lookup types and you can't add any value there. Moreover, both of these lookup types are for Germany and should not be used for any other country requirement. However, I can see one issue there in HRX_DE_NAME_PREFIX being a system lookup type and not having even one value there. You can open SR for that.
BTW, where do you want to use these lookups? If you have any specific requirement, you can consider creating your own lookup.

Optimizer Statitics Gathering Task is not updating stale statistics

Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production PL/SQL Release 11.2.0.2.0 - Production
******************** List stale statistics for Schema IGR using dbms_stats.gather_database_stats **************************
DECLARE
ObjList dbms_stats.ObjectTab;
BEGIN
dbms_stats.gather_database_stats(objlist=>ObjList, options=>'LIST STALE');
FOR i in ObjList.FIRST..ObjList.LAST
LOOP
IF ObjList(i).ownname = 'IGR' THEN
dbms_output.put_line(ObjList(i).ownname || '.' || ObjList(i).ObjName || ' ' || ObjList(i).ObjType || ' ' || ObjList(i).partname);
END IF;
END LOOP;
END;
IGR.USER_INFO TABLE 189 < --------------------- 189 Tables with stale statistics
PL/SQL procedure successfully completed.
**************************** Check date IGR Table(s) last analyzed ***********************************************
SELECT MAX(last_analyzed) last_analyzed
FROM dba_tables
WHERE owner = 'IGR'
LAST_ANALYZED
14-DEC-11
*************************** Check status of Task 'auto optimizer stats collection' **********************************
SELECT client_name, job_name, job_status, job_start_time
FROM dba_autotask_job_history
WHERE client_name = 'auto optimizer stats collection'
ORDER BY job_start_time
CLIENT_NAME JOB_NAME JOB_STATUS JOB_START_TIME
auto optimizer stats collection ORA$AT_OS_OPT_SY_11952 SUCCEEDED 12-FEB-12 10.07.23.059313 AM EUROPE/LONDON
auto optimizer stats collection ORA$AT_OS_OPT_SY_11955 SUCCEEDED 12-FEB-12 02.07.33.879238 PM EUROPE/LONDON
auto optimizer stats collection ORA$AT_OS_OPT_SY_11958 SUCCEEDED 12-FEB-12 06.07.43.783262 PM EUROPE/LONDON
auto optimizer stats collection ORA$AT_OS_OPT_SY_11961 SUCCEEDED 12-FEB-12 10.07.54.206488 PM EUROPE/LONDON
Any suggestions welcome
Thanks
Steve

Thank you for the feedback.
I have manually updated the statistics on a single Table successfully and the Table has been removed from the list of stale statistics. So this is further evidence the daily Task "Optimizer Statistics Gathering Task" is failing to update stale statistics.
Any further comment or suggestion welcome
Thanks
Steve
SQL> SELECT owner, table_name, last_analyzed, num_rows
FROM dba_tables
WHERE owner = 'IGR' AND table_name = 'SYSAUDIT';
OWNER TABLE_NAME LAST_ANAL NUM_ROWS
IGR SYSAUDIT 14-DEC-11 59036
1 begin
2 dbms_stats.gather_table_stats(
3 ownname=> 'IGR',
4 tabname=> 'SYSAUDIT',
5 estimate_percent=> 100,
6 cascade=> DBMS_STATS.AUTO_CASCADE,
7 degree=> null,
8 no_invalidate=> DBMS_STATS.AUTO_INVALIDATE,
9 granularity=> 'AUTO',
10 method_opt=> 'FOR ALL COLUMNS SIZE AUTO');
11* end;
PL/SQL procedure successfully completed.
SQL> /
OWNER TABLE_NAME LAST_ANAL NUM_ROWS
IGR SYSAUDIT 13-FEB-12 104970

Oracle 11g database can we update patch directly from 11.2.0.3.0 to 11.2.0.4.0?

Hi,
I have installed Oracle 11g database.
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for 64-bit Windows: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
I want to update the patch.
Oracle 11g database can we update patch directly from 11.2.0.3.0 to 11.2.0.4.0?
Is any impact on the database?
Kindly suggest,
Regards,
Sachin

11.2.0.4 is nothing but a patchset of 11.2.0.3, in-place upgrade is allowed :
http://docs.oracle.com/cd/E11882_01/server.112/e23633/preup.htm#UPGRD12370
"You cannot install the new software into the same location for Oracle home as your current release, unless you are installing an Oracle Database 11g patchset release. For a patchset release, you can use the same Oracle Database 11g Oracle home."
And since it's a patchset, a direct upgrade is ok.
Lastly, yes, every upgrade has an impact (e.g. perf.), it has to be tested.
Nicolas.

How to update key fields for table

Hi,
how to update key fields for a table.The update statement is not working for the same.
Regards,

Hi,
See the below example.
TABLES SPFLI.
DATA WA TYPE SPFLI.
MOVE 'AA' TO WA-CARRID.
MOVE '0064' TO WA-CONNID.
MOVE 'WASHINGTON' TO WA-CITYFROM.
UPDATE SPFLI FROM WA.
MOVE 'LH' TO SPFLI-CARRID.
MOVE '0017' TO SPFLI-CONNID.
MOVE 'BERLIN' TO SPFLI-CITYFROM.
UPDATE SPFLI.
CARRID and CONNID are the primary key fields of table SPFLI. All fields of those lines where the primary key fields are "AA" and "0064", or "LH" and "0017", are replaced by the values in the corresponding fields of the work area WA or the table work area SPFLI.
Regards,
raj.

How to update equipment ship to party and sold party data

Hi all,
How to update equipment ship to party and sold party data? Is there any BAPI or FM?

Hi Suresh,
chech with the below
PM_PARTNER_UPDATE      "Parner update
ITOB_EQUIPMENT_READ_SINGLE   "read equmment data
ITOB_EQUIPMENT_MODIFY_SINGLE   "update the parner data for the same equimpmet
hope it helps you..
Thanks!
Edited by: Prasanth on Apr 14, 2009 6:30 PM

HT201210 Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions

Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions?

Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, and 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.
Errors related to downgrading iOS

How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?

Hi,
How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?
I tried with acual method as below from client '000':
DELETE FROM USR02 CLIENT SPECIIED WHERE BNAME = 'SAP*' AND MANDT = '001'.
After this when I tried to logon '001' using SAP* with password PASS it is giving the message that Incorrect logon and password.
(Also when I checked for 'SAP*' in 001 it looks like it is not got created as I queried as below:
SELECT SINGLE * FROM USR02 CLIENT SPECIFIED WHERE BNAME = 'SAP*' AND MANDT = '001'.)
Can anybody throw some light on this? RewardS is guranteed for solutions!
-B S B

Hi again:
I forget to tell.
You must restart the system. So, that a new user with the name "sap*" gets generated with password "pass"
Hope this wil help,
Eric

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

How do I change platform for downloading and installing Photoshop Elements from Windows to Mac?

How do I change platform for downloading and installing Photoshop Elements from Windows to Mac?

As long as your license supports both platforms you should only have to download the Mac version and install/activate using your serial number. If you need help finding a link to download the file, please indicate the PSE version you need.

HT1338 I'm running MacOS 10.7.5 with all updates and did an update last night for aperture and now aperture doesn't open. What's Zup?

I'm running MacOS 10.7.5 with all updates and did an update last night for aperture and now aperture doesn't open. What's Zup? Help!

Also when I do the system update it's not giving me an update for the latest Snow Leopard. I never knew that was available until I started looking around this site and it seems that since I have the internal dual core I should be able to update to mountian lion...is this correct? Will someone please help me and walk me through this. I love my mac I want to have it running like it should be.

How to create a Templates for Categories and Products In BCC

Hi All,
Could you please tell me How to create a Templates for Categories and Products In BCC and how Can I get those Templates details(Categories and Products)in jsp
If possible can any one send the document or where we find in atg docs
Regards,

At product/category/sku level there is a property called template.
Find the property in ACC/BCC and provide all the values including the URL property.
In you jsp, you can use this property from product/sku like the way you retrieve any other property from sku/product.
<dsp:valueof param="product.template.URL" />
Using that property with <dsp:include> includes that page.
Peace
Shaik

How to set userlevel permission for GFS and NFS

hi
how to set userlevel permission for GFS and NFS?
regards

hi
http://www.redhat.com/docs/manuals/enterprise/
AND
http://en.tldp.org/
probably your best bet.
regards

How to create fxplug transition for xcode and quatrz composer

how to create fxplug transition for xcode and quatrz composer?

Hi Mohan,
You have to create and configure your system in the system administration tab in the portal.
Usually, it looks like the following:
System from template: JDBC System
Connector properties
   Connection URL: jdbc:sap:sqlserver://<serverlocation>;DatabaseName=<database name>
   Driver class name: com.sap.portals.jdbc.sqlserver.SQLServerDriver
User management properties
   User mapping type: admin, user
Set the system with an alias.
Go to user administration tab and map the user with VCRole to the configured system
(the default for MSSQL is usauly user: sa and pw: admin)
Save your changes and logon to VC with this user.
The alias name should appear in your list of systems.
Hope I helped,
Shay

I have a lock field(boot.efi) in recycle bin how to put it out (for unlock and empty my recycle bin)

I have a lock field(boot.efi) in recycle bin how to put it out (for unlock and empty my recycle bin)

Trying logging out/in or a restart.
If that doesn't allow you to empty the trash:
Trash – Empty When File is Locked or in Use
Trash FAQ
Maybe this will help:
https://discussions.apple.com/message/17029415#17029415

Oracle 11g upgrade: How to update stale statistics for sys and sysman?

Similar Messages

Maybe you are looking for