Oracle 12c - rman backup for all PDB

Do we have any ready commands that will take backup for all the attached PDB in oracle 12c (container managed db)?

To backup your entire container DB, connect to your CDB & issue a full backup:
rman> backup database;
Backing up your pdb, either connect to the target itself & issue a backup or
rman> backup pluggable database porcl1;
Backing up only the root, connect to the target &
rman> backup database root;
always condensed nicely here: ORACLE-BASE - Multitenant : Backup and Recovery of a Container Database (CDB) and a Pluggable Database (PDB) in Oracle D…

Similar Messages

RMAN backup archivelog all delete input

Hello DBAs,
what does this command will do?
RMAN> backup archivelog all delete input;
DN

I have set cron job for RMAN> backup archivelog all delete input; and its work.
But I got following message in my log file.
Please give ur feed back.
Recovery Manager: Release 10.1.0.4.0 - 64bit Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN>
connected to target database: SIDNAME (DBID=XXXXXXXX)
using target database controlfile instead of recovery catalog
RMAN>
Starting backup at 10-FEB-06
current log archived
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=269 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=268 devtype=DISK
channel ORA_DISK_1: starting compressed archive log backupset
channel ORA_DISK_1: specifying archive log(s) in backup set
input archive log thread=1 sequence=5701 recid=2412 stamp=581958928
input archive log thread=1 sequence=5702 recid=2413 stamp=581961105
input archive log thread=1 sequence=5703 recid=2414 stamp=581964532
input archive log thread=1 sequence=5704 recid=2415 stamp=582025325
input archive log thread=1 sequence=5705 recid=2416 stamp=582029976
input archive log thread=1 sequence=5706 recid=2417 stamp=582031922
channel ORA_DISK_1: starting piece 1 at 10-FEB-06
channel ORA_DISK_2: starting compressed archive log backupset
channel ORA_DISK_2: specifying archive log(s) in backup set
input archive log thread=1 sequence=5707 recid=2418 stamp=582037207
input archive log thread=1 sequence=5708 recid=2419 stamp=582038471
input archive log thread=1 sequence=5709 recid=2420 stamp=582043538
input archive log thread=1 sequence=5710 recid=2421 stamp=582048518
input archive log thread=1 sequence=5711 recid=2422 stamp=582055205
channel ORA_DISK_2: starting piece 1 at 10-FEB-06
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 02/10/2006 18:00:
12
ORA-19502: write error on file "/u02/backup/backup_6ehb2t97_1_1", blockno 6145 (
blocksize=512)
ORA-27063: number of bytes read/written is incorrect
IBM AIX RISC System/6000 Error: 28: No space left on device
Additional information: -1
Additional information: 1048576
channel ORA_DISK_1 disabled, job failed on it will be run on another channel
RMAN-03009: failure of backup command on ORA_DISK_2 channel at 02/10/2006 18:00:
12
ORA-19502: write error on file "/u02/backup/6fhb2t97_1_1", blockno 6145
(blocksize=512)
ORA-27063: number of bytes read/written is incorrect
IBM AIX RISC System/6000 Error: 28: No space left on device
Additional information: -1
Additional information: 1048576
channel ORA_DISK_2 disabled, job failed on it will be run on another channel
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 02/10/2006 18:00:
12
ORA-19502: write error on file "/u02/backup/backup_6ehb2t97_1_1", blockno 6145 (
blocksize=512)
ORA-27063: number of bytes read/written is incorrect
IBM AIX RISC System/6000 Error: 28: No space left on device
Additional information: -1
Additional information: 1048576
RMAN>
Recovery Manager complete.
DN

Related to Unused compression in RMAN backup for 10.2.0.4 database

Hi
I recently read through one of the document related to Unused compression in RMAN backup for 10.2.0.4 database. According to this
Unused Block Compression is done, if all of the following conditions apply:
+ The COMPATIBLE initialization parameter is set to 10.2
+ There are currently no guaranteed restore points defined for the database
+ The datafile is locally managed
+ The datafile is being backed up to a backup set as part of a full backup or a level 0 incremental backup
+ The backup set is being created on disk.
I have two queries
1) What is meant by "uaranteed restore points defined for the database"
2) If backup is being directly taken to tape, this feature would not be used
Rgds
Harvinder

1. Normal and Garanteed Restore Points
2. No

Rman backup for rac by oem

Br,Hi,
DB : 10.2 and 11.2
How to schedule rman backup for cluster in OEM?How to schedule without OEM?
If one of the node failed,Is it possible to run in another node automatcially?
How to schduel export/datadump in rac by oem?
Br,
Raj

I Am not using oem, without oem you should write several scripts....
for linux hot backup(archive log enabled):
bck.sh
set ORACLE_SID=mydb
set ORACLE_HOME=....
rman target sys/.... @'.../bck.ora'
bck.ora
run
BACKUP AS COMPRESSED BACKUPSET FORMAT "..../db_%d_%T_%s_%p_%U.bak" INCREMENTAL LEVEL 0 DATABASE PLUS ARCHIVELOG DELETE INPUT FORMAT "...../archivelogBackup/arch_%d_%T_%s_%p_%U.bak";
delete force noprompt obsolete redundancy 3;
backup FORMAT '..../ctl_%d_%T_%s_%p_%U' current controlfile spfile;
And create executable job which instance_id=1 and will run your bck.sh script and create schedule for this job, when first node will down you must change instance_id attribute to second one, and be sure that all backup paths exists in all nodes.
Ramin Hashimzade

RMAN backup for two databases with similar DBID

We have two databases with SID 'uiivc' and 'uiivc1' running from one of the HP Unix 11.11 PA-RISC server. I did configured RMAN backup for both databases. But it is found that both databases have same DBID [connected to target database: UIIVC (DBID=3005194057) for UIIVC & connected to target database: UIIVC1 (DBID=3005194057) for UIIVC1] and backup configured via crontab seen running fine with full backup at weekend and archivelog backup at daily for both databases. Now my query is that will it create any issues at time of restoration since both databases have similar DBID? Does RMAN uses DBID to distinguish databases?
Kindly help to clarifiy
Regards
Manoj Thakkan
[email protected]

Hi Tycho,
I configured RMAN to store controlfile backups in different folders on each database.
UIIVC database:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/hot_backups/rmanbkp/uiivc/cf%F';
UIIVC1 database:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/hot_backups/rmanbkp/uiivc1/cf%F';
Server output:
uii-79:uiivc1 > ls -lrt /hot_backups/rmanbkp/uiivc
total 43904816
-rw-r----- 1 oracle dba 21144928256 Jul 15 10:58 8rkk68p5_1_1
-rw-r----- 1 oracle dba 287110144 Jul 15 13:41 8tkk6sfv_1_1
-rw-r----- 1 oracle dba 862700544 Jul 16 08:00 90kk8sel_1_1
-rw-r----- 1 oracle dba 152350720 Jul 16 08:09 92kk8tgg_1_1
-rw-r----- 1 oracle dba 32145408 Jul 16 08:09 cfc-3005194057-20090716-01
uii-79:uiivc1 > ls -lrt /hot_backups/rmanbkp/uiivc1
total 24186112
-rw-r----- 1 oracle dba 6373965824 Jul 13 13:10 83kk1ftf_1_1
-rw-r----- 1 oracle dba 784803840 Jul 13 13:46 85kk1j5e_1_1
-rw-r----- 1 oracle dba 1022674944 Jul 13 23:07 87kk2kjs_1_1
-rw-r----- 1 oracle dba 1814230016 Jul 14 23:46 89kk591i_1_1
-rw-r----- 1 oracle dba 1211042816 Jul 15 23:06 8bkk7tc0_1_1
-rw-r----- 1 oracle dba 1165975552 Jul 15 23:10 8ckk7tnr_1_1
-rw-r----- 1 oracle dba 10534912 Jul 15 23:10 cfc-3005194057-20090715-00
And I saw backups are placing in the respective folders too. So with these settings, can I safely assume there is no issues with RMAN backup and restore having similar DBID for two databases running on same server?
Regards
Manoj Thakkan

Last back up: never . i am connected to a wifi network and phone also pluged in yet my icloud never backs up , i have also deleted previous backup for all applications(although there was never any successful backup)in"manage storage" still no headway

last back up: never . i am connected to a wifi network and phone also plugged in yet my icloud never backs up , i have also deleted previous backup for all applications(although there was never any successful backup) in " manage storage" still no headway

rucchyy wrote:
my Internet is working fine . i also turned the iCloud drive off, could this be the reason I can't back up?
No.
Have you done:
Restart / Reset
http://support.apple.com/en-us/HT201559

Oracle 9i RMAN backup filling up all disk and failing at the very end

Hello to all and thank you in advance for any input from any of you.
I am new in oracle and the only one in my company with a little bit of oracle knowledge, which is not a whole lot.
I inherited a few servers (Linux and Windows based). We mostly run all our production environment on a Linux box hosting oracle 10g release 10.2.0.1 but we had a legacy application server that still runs on 9i release 9.2.0.1.0. This server is a windows 2003 box, the previous DBA or someone else with admin rights to this machine compressed the whole drive where oracle resides, when I started summarying the oracle assets, I saw this server with no backups scheduled and a compressed disk with very limited space after this compression, only 13 GB left, the database if uncompressed would definitively filled up all the disk. The machine is in used and cannot be taken down for more than a couple of hours. We tried adding another disk but the machine only accept it as a hot spare. The database is in archive mode, when I tried to run a RMAN backup, it start filling up the database drive until it's empty and it crashes the whole machine, it seems like the buffer is growing and growing until it fills up the whole drive. The only way to get the server up and running again is to reboot the machine since the server is more than 6 years old we are not please with this action because we are afraid the machine would go south in one of those reboots.
Has anyone heard of similar issues when running RMAN on a compressed drive? Can the compressed disk have any involvement in this kind of odd behaviour? I tried running the backup in debug mode and creating a log in a different disk (the one where the backup is going to) and still the same issue. Again any help is much appreciate,
Sincerely,
Alex

Sybrand,
Thank you for your fast response, I am going to use your previous post to answer one by one your question,
1 The Oracle binaries --- on a compressed drive > Yes
2 The Oracle database control files redo log files and datafiles on that same compressed drive? > Yes
3 The archived redo log ditto? > Yes
I know for a fact (as I have been using that in 9i) you can create a RMAN backup on a compressed drive, and you can have your archived redo go to a compressed drive. No problemo! > Excellent good news!!!
But I would never touch the data files. Please note backup sets are multiplexed files consisting of multiple datafiles, so RMAN would need to do some calculations to decompress several blocks at the same time and to calculate a new block and compress it.
Do you have enough space to:
a) (preferred) to make datafile copies instead of a backup >
Not in the drive that hosts the oracle instance but yes on an external usb drive (1TB) I attached to use as a backup repository, maybe this is why I am having these issues. I only have 13 GB left on that drive where the oracle instance resides (actually as I explained in a previous reply to Mark, the server only has 3 slots for disks, two of them as configured as RAID 1 and the other is a hot spare because the RAID configuration manager cannot can only added as hot-spare. The raided disk are partitioned in two, one small partition is for the OS and the other is for the oracle instance). When you said make a copy of the datafiles, I assumed you are talking about doing manual backups, and copying the database after using using "alter tablespace tablespace_name begin backup; then copy the file; alter tablespace tablespace_name end backup;
b) use filesperset=1 on the backup command line, so the multiplexing (and associated calculations) stop. I have not tried the option of fileperset yet but I can tryi it and see if that helps.
Can you post the last few lines of the RMAN log where RMAN bombs out? Note: the last few lines. Not all of it, or you must send some paracetamol in conjunction! >
When I ran the debug option, I stopped the backup at less than 20% because I didn't want to reboot the system in the middle of the production time, the backup consumed at least 3 GB during the time was running. The times I ran the RMAN backup I didn't used the debug option so I don't have a log long enough to send unless you want the last few lines of what I have.
Thanks again for your input,
Sincerely,
Alex

Need Oracle 12c whitepaper recommendation for upgrade assessment

Hi: Good morning!
This is not an urgent request, but appreciate your recommendation! I need documents about Oracle 12c (our os is IBM AIX power system, 6.1, 64 bit), because we are planning upgrade current oracle database 11.2.0.4 to 12c, we need a thorough assessment to 12c since 12c introduced many innovative, new features, major component changes, as well as impact to java application. The document I have so far is-
1. database upgrade guide
http://docs.oracle.com/database/121/UPGRD/preup.htm#UPGRD002
2. Deprecated API (oracle database JDBC Java API Reference)
https://docs.oracle.com/database/121/JAJDB/deprecated-list.html
3. Tom Kytes Top 12 new features for Oracle 12c (from web).
There are many things to look for. I want to know the major things I should focus in new features & impact to java application.
what document can provide me the info!
thank you very much in advance!

Hi all:
Can anyone gives me advice after upgrade from 11.2.0.4 database to 12c database, which 'core-DB new features' impact to Java application more, and that we should focus on assessment?
There are too many new & innovative features introduced in 12c. Should I convert our single instance database (on non-cluster server) to 'CDB/PDB' during upgrade? Is it a 'Must-to-do' or not? We have a physical standby DB, how to do with the standby?
Oracle Documents I reviewed are: 'Oracle 12c database document', 'Oracle 12c Java Developer's Guide'. I recommend this to our developers based on 'Oracle 12c Java Developer's Guide':
Oracle JVM ( JDK6, JDK7 support in 12)
[note:need to check jvm components for application: library manager, compiler, interpreter, class loader, server-side JDBC internal driver, server-side SQLJ, translator, system classes; Java stored procedure, SQLJ, JDBC, etc]
2. Oracle Memory Space management      (         garbage collection)
3. Multithreading
4. Footprinting
5. Dynamic class loading
6. JNDI class support
7. Auditing for Java ( alert/execute/audit/grant is enabled in auditing)
8. Support for logging
9. Support for customizing default java.security resource
10. Improved for debugging
However, I may lost myself in core-DB new features for:
1. advanced analytics features
2. OLAP features
3. Partitioning enhance
4. Performance for zero effort
5. Compression and Archiving features (depends on application tables design)
6. Database Overall
   - Integrate With Operating System Processor Groups
   - Oracle Data Pump Support
   - Multitenant Architecture (Not sure)
   - PDBs Backup and Recovery (Not sure)
   - PDBs Point-in-Time Recovery (Not sure)
   - PDBs Resource Plans (Not sure)
   - Utilities
7. High Availability
   - Application Continuity
   - Transaction Guard
   - Logical Replication
   - Global Data Services
   - Online Operations
   - Oracle Data Guard Enhancements (Depends on our standby design)
8. Manageability
   - PGA Size Limit
   - Resource Manager Runaway Query Management
   - Spot ADDM
9. General
   - DBMS_QOPATCH
10. Performance
11. Security enhance
12. Improve Security Manageability, Administration and Integration
    - Database vault
Is my above suggestion (text in red-color) correct?
Thank you very much!

Is it necessary to take RMAN backup for ASM

Hi all
I also know we need RMAN to take backup for ASM . But i also seen its possible to take backup by using dd command itself on ASM . Why we need RMAN rather than this method . What is the specific reason we using RMAN,

its possible to take backup by using dd command itself on ASM Very bad idea.
1. You'll run into the classic "fractured block" issue when attempting a recover or reading a block after the restore
2. RMAN can be used to
a relocate individual datafiles,
b duplicate / clone database,
c restore to an alternate server,
d copy / move from ASM to filesystem
e verify for corruption
f generate reports on backups taken
None of which dd of ASM will do reliably (depending on the skills of the DBA/SA).
Hemant K Chitale
Edited by: Hemant K Chitale on Feb 19, 2013 9:56 AM
Added the words : "reliably (depending on the skills of the DBA/SA)"

RMAN Backups for archive logs

Hi,
We are taking daily backups using BCV's and archive backup to tapes using RMAN. Please note we are using RMAN only for archive backups.
We are changing our backup strategy and I need below information on RMAN.
1) Is there any benefit I will be getting if I use RMAN for archive backups ( like finding the courruption in the logs,health of the archive) etc? Any reference note for this would be great.
2) If I use multiplexing of archives using LOG_ ARCHIVE_DEST & LOG_ ARCHIVE_DUPLEX_DEST with this I want RMAN to take the backup of archives and delete from one location only ( Say from LOG_ ARCHIVE_DEST ). And I want the archives in LOG_ ARCHIVE_DUPLEX_DEST to maintain on my own ( Like different purge strategy to zip and keep for 7 days in this location.
If I use command "backup archivelog all delete input" it is picking and removing radomly from either of these locations. Is there a way I can configure RMAN so that it will not touch my secondary locaton?
Thanks in advance.
Thanks,
Varma

>
1) Is there any benefit I will be getting if I use RMAN for archive backups ( like finding the courruption in the logs,health of the archive) etc? Any reference note for this would be great.
You can use validate backupset command to check the health of backup.
2) If I use multiplexing of archives using LOG_ ARCHIVE_DEST & LOG_ ARCHIVE_DUPLEX_DEST with this I want RMAN to take the backup of archives and delete from one location only ( Say from LOG_ ARCHIVE_DEST ). And I want the archives in LOG_ ARCHIVE_DUPLEX_DEST to maintain on my own ( Like different purge strategy to zip and keep for 7 days in this location.
Yes, you can do that.
If I use command "backup archivelog all delete input" it is picking and removing radomly from either of these locations. Is there a way I can configure RMAN so that it will not touch my secondary locaton?
You can allocate channels for that.
regards

Oracle 9i RMAN backup intrigation with OSB 10.3

Hi expertise,
I want to add rman backup process(script) to OSB scheduling as like filesystem backup.
Admin Svr: Windows 2003
Media & Client: Solaris 10
DB: oracle 9i
thanks advance

Hi expertise,
I want to add rman backup process(script) to OSB scheduling as like filesystem backup.
Admin Svr: Windows 2003
Media & Client: Solaris 10
DB: oracle 9i
thanks advance

Where can i find best course material for Oracle 12c New features for admin

Dear Good wishes.
Im oracle 10g ocp certified. Looking to upgrade to OCP 12c new features for admin.
I want to get a best course material for this. Please guide me to find the downloadable link.
Thank you.

http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=1Z0-060
or https://www.selftestsoftware.com/certtestprep/practice-test/oracle/1z0-060.kap
or https://www.transcender.com/practice-exam/oracle/1z0-060.kap
or https://www.transcender.com/e-learning/oracle/1z0-060.kap
or http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=609&get_params=dc:D77758,clang:EN
Hemant K Chitale

Can we restore oracle 11g RMAN backups to 10g server

Hi,
I have RMAN backups (full backup)of oracle 11g database. My server was suddenly crashed due to hardware failure.
We have another Oracle 10g server. Is it possible to restore RMAN backups of 11g database to Oracle 10g server???
Thanks

I don't have 11g server ready with me. The other server running oracle 10g and I dont have rights to install oracle 11g on the 10g server. So I can not test the RESTORE/RECOVER commands.
If anyone had experience in the past, please let me know whether we can RESTORE RMAN backups of 11g database to oracle 10g server...
Thanks

Rman backup for tablespaces

Dear,
i want to use rman to backup the tablespaces. I have write a pram file as below.
owner=database
file=c:/backup/database.dmp
log=database.log
buffer=81920
How can i run this file from rman
ManyThanks

It appears that you have created a parfile for the export utility and NOT for RMAN. The basic command to backup a tablespace in RMAN is:
RMAN> BACKUP TABLESPACE USERS;If you are looking to actually export a tablespace, you can save the following to a file called user_parfile.txt
userid=system
file=d:\user_exp.dmp
log=d:\user_exp.log
tablespaces=users
buffer=81920and execute as:
exp parfile=d:\user_parfile.txt

Rman backup for oracle11g database

Hi,
I want to take the rman backup of 11.2.0.1.0 database, but my catalog database is 10.2.0.1. So Is it possible to take it.
Please suggest me.
My target database : 11.2.0.1.0
OS: windows 2003 R2 server
My catalog database: 10.2.0.1
OS: windows 2003 R2 server

here you go : http://www.comp.dit.ie/btierney/oracle11gdoc/backup.111/b28273/compat.htm

Oracle 12c - rman backup for all PDB

Similar Messages

Maybe you are looking for