RMAN backup for two databases with similar DBID

We have two databases with SID 'uiivc' and 'uiivc1' running from one of the HP Unix 11.11 PA-RISC server. I did configured RMAN backup for both databases. But it is found that both databases have same DBID [connected to target database: UIIVC (DBID=3005194057) for UIIVC & connected to target database: UIIVC1 (DBID=3005194057) for UIIVC1] and backup configured via crontab seen running fine with full backup at weekend and archivelog backup at daily for both databases. Now my query is that will it create any issues at time of restoration since both databases have similar DBID? Does RMAN uses DBID to distinguish databases?
Kindly help to clarifiy
Regards
Manoj Thakkan
[email protected]

Hi Tycho,
I configured RMAN to store controlfile backups in different folders on each database.
UIIVC database:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/hot_backups/rmanbkp/uiivc/cf%F';
UIIVC1 database:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/hot_backups/rmanbkp/uiivc1/cf%F';
Server output:
uii-79:uiivc1 > ls -lrt /hot_backups/rmanbkp/uiivc
total 43904816
-rw-r----- 1 oracle dba 21144928256 Jul 15 10:58 8rkk68p5_1_1
-rw-r----- 1 oracle dba 287110144 Jul 15 13:41 8tkk6sfv_1_1
-rw-r----- 1 oracle dba 862700544 Jul 16 08:00 90kk8sel_1_1
-rw-r----- 1 oracle dba 152350720 Jul 16 08:09 92kk8tgg_1_1
-rw-r----- 1 oracle dba 32145408 Jul 16 08:09 cfc-3005194057-20090716-01
uii-79:uiivc1 > ls -lrt /hot_backups/rmanbkp/uiivc1
total 24186112
-rw-r----- 1 oracle dba 6373965824 Jul 13 13:10 83kk1ftf_1_1
-rw-r----- 1 oracle dba 784803840 Jul 13 13:46 85kk1j5e_1_1
-rw-r----- 1 oracle dba 1022674944 Jul 13 23:07 87kk2kjs_1_1
-rw-r----- 1 oracle dba 1814230016 Jul 14 23:46 89kk591i_1_1
-rw-r----- 1 oracle dba 1211042816 Jul 15 23:06 8bkk7tc0_1_1
-rw-r----- 1 oracle dba 1165975552 Jul 15 23:10 8ckk7tnr_1_1
-rw-r----- 1 oracle dba 10534912 Jul 15 23:10 cfc-3005194057-20090715-00
And I saw backups are placing in the respective folders too. So with these settings, can I safely assume there is no issues with RMAN backup and restore having similar DBID for two databases running on same server?
Regards
Manoj Thakkan

Similar Messages

No shared library found for the database with ID DBID

Hi SDN,
We're trying to connect our BW system under WIN/MSSQL 2005 to an source system (RSA1) witch is an DATABASE DB4 on OS400.
when we check the database connection, it gave us the error
No shared library found for the database with ID DBID
in SM21 we've found
As well as the standard connection, an attempt was made to set up
another database connection, under the specified ID. The Shared Library
for this second database could not be found.
The Shared Library is usually found in the the Executable
directory (profile parameter DIR_LIBRARY) under the name dbs
<dbs>slib<os_ext>. <dbs> stands for the database type and <os_ext>
stands for the operating system-specific extension of the Shared
Libraries.
The database type is determined from the entry that corresponds to the
specified DB ID in the table DBDCON. Check whether the data in this
entry is correct.
someone can guide me were to found DBSL library for this time of external connection from Windows to DB4?
thanks in advance,
best regards,
Pedro Rodrigues

Hi again,
after download dbdb4slib.dll and copied it to kernel directory, it gave this error message
B create_con (con_name=DBID)
B Loading DB library 'E:\usr\sap\SID\SYS\exe\run\dbdb4slib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(E:\usr\sap\SID\SYS\exe\run\dbdb4slib.dll) Error 126 [dlnt.c       237]
M          Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'E:\usr\sap\SID\SYS\exe\run\dbdb4slib.dll'
[dbcon.c      4672]
B ***LOG BYG=> could not load library for database connection DBID      [dbds#3 @ 1035] [dbds    1035 ]
someone has some idea?
thakns

Rman backup for oracle11g database

Hi,
I want to take the rman backup of 11.2.0.1.0 database, but my catalog database is 10.2.0.1. So Is it possible to take it.
Please suggest me.
My target database : 11.2.0.1.0
OS: windows 2003 R2 server
My catalog database: 10.2.0.1
OS: windows 2003 R2 server

here you go : http://www.comp.dit.ie/btierney/oracle11gdoc/backup.111/b28273/compat.htm

Related to Unused compression in RMAN backup for 10.2.0.4 database

Hi
I recently read through one of the document related to Unused compression in RMAN backup for 10.2.0.4 database. According to this
Unused Block Compression is done, if all of the following conditions apply:
+ The COMPATIBLE initialization parameter is set to 10.2
+ There are currently no guaranteed restore points defined for the database
+ The datafile is locally managed
+ The datafile is being backed up to a backup set as part of a full backup or a level 0 incremental backup
+ The backup set is being created on disk.
I have two queries
1) What is meant by "uaranteed restore points defined for the database"
2) If backup is being directly taken to tape, this feature would not be used
Rgds
Harvinder

1. Normal and Garanteed Restore Points
2. No

RMAN backup of STANDBY database

I have just created a STANDBY database using Oracle 8.1.7 which I am trying to backup using RMAN. This would then not impact on the PRODUCTION database, yet still give a valid backup. The problem I am having is that contrary to what I have been told and read about the `duplicate for standby` command, it does not reset the DB_ID. This has the effect that you canot register your new STANDBY database in the RMAN catalog as it sees it as the PRODUCTION instance that was used to create it. I have found several `solutions` on Metalink, which all require the use of a `resetlogs` command, so invalidating the STANDBY database. Does anyone know of a way that I can bypass this problem and carry out valid backups of the STANDBY database ?
TIA
Mark Tindall
Email: [email protected]

Mark,
The STANDBY database must have the same DBID as the production or you could not use the backups taken at a standby
database to recover the production database.
To backup the standby database with RMAN, you must use a recovery catalog. Take at look at http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/server.920/a96566/rcmbackp.htm#445993
for information on how to backup the standby with RMAN.
Tammy

RMAN backup in RAC failing with error ORA-19566

Hi all, i have 2 node RAC and i am trying to take rman backup of the database which is in ASM filesystem.
There is a corruption in SYSAUX file and rman is failing to take backup of the sysaux datafile and error thrown at the end like
piece handle=/home/oracle/orabackup/BLOOM_LVL0_20120627_1qnejueh_s58_p1 tag=TAG20120627T185538 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:56
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/27/2012 18:56:17
*ORA-19566: exceeded limit of 0 corrupt blocks for file +DATA/bloom/datafile/sysaux.257.775475317*
Then i tried to validate the backup in rman of the datafile sysaux nad fired the following query
SQL> SELECT * FROM v$database_block_corruption;
FILE# BLOCK# BLOCKS CORRUPTION_CHANGE# CORRUPTIO
3 32011 1 0 ALL ZERO
3 32049 40 0 ALL ZERO
3 32034 1 0 ALL ZERO
3 28964 1 1399837 LOGICAL
3 32015 2 0 ALL ZERO
and found all the blocks in the table WRH$_SQL_PLAN.
Then dropped the table, and tried to take backup of the database and it is failing again with the same error..
ANY SOLUTION TO TAKE BACKUP OF THE DATABASE.
anyhow we can SET MAXCORRUPT FOR DATAFILE 3 to value, but does this works all time...
Thanks in advance,
TEJAS

Both are good suggestions, but
Osama-mustafa wrote:
RMAN> blockrecover datafile 5 block 2684; -- Fix Eror That ship has already sailed:
TEJAS_DBA wrote:
And Yes this is the first time i am taking backup on the database.And:
Osama-mustafa wrote:
Or Skip Option
Like
RMAN> RUN{
2> SET MAXCORRUPT FOR DATAFILE 1,3 to 1;
3> BACKUP DATABASE;
4> }The OP was aware of this option and hopefully was able to get at least some sort of a backup eventually. But as for the dropped WRH$_SQL_PLAN, TEJAS is, I will use the word "braver" than most. And as often is the case, Dan Morgan offered the only bit of sensible advise.
Open an SR.
Good luck.

How can i do a RMAN backup of my database from the network ?

i'm using oracle 8i.1.7.3 with win server 2003
i want to know how can i do a RMAN backup of my database (sever machine A) from the network.
i'd like to save the backup in another machine (the same LAN, the same OS ).
to do that i've mapped a logical device in my comptur (z):
when i run rman command i got this error:
channel ORA_DISK_1: starting piece 1 at .......
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command ON ORA_DISK_1 channel at .......
00
ORA-19504: failed TO CREATE file "\\remote\save\"
ORA-27040: skgfrcre: create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 123) The filename, directory name, or volume label syntax is inco
rrect.

Hi,
ORA-19504: failed TO CREATE file "\\remote\save\"make sure you have created this directory and change it's ownership (chown command)to oracle.
also make sure that oracle user has permission to write to this direcotry (chmod command)
hope this helps
cheers, walrus

HOT Backups for smaller databases

Should we schedule hot backups for small databases? the database size is around 1.5 GB. We have already scheduled daily FULL DB Export.
The database is Oracle 8i.

RMAN> run {
2> allocate channel ch1 type disk format 'e:\rman_backup\backup%d_DB_%u_%p';
3> backup database;
4> backup archivelog all;
5> release channel ch1;
6> }
RMAN-03022: compiling command: allocate
RMAN-03026: error recovery releasing channel resources
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: allocate
RMAN-06172: not connected to recovery catalog database
RMAN>

Two database with the same sid but different ORACLE_HOME on one host

two database with the same sid but different
ORACLE_HOME on one host,and if configure them with
two differnt lisnter staticaclly,this abosultely work
because in the lisnter.ora we must provice
ORACLE_HOME variable,with this ORACLE_HOME the client
can differentiate which database to connect,but if
use dynamically register feature,how can the client
tell which database to connect?

Also note that this type of configurtion may not be supported.
Just because a given configuration works in certain given conditions does not mean that it would be supported.
If this setup is for a configuration that has any value, please also Contact Oracle Support to get their inputs on what you are trying to accomplish.

Unable to monitor two databases with same name on two different hosts

I have got two databases with same name on two different hosts. I added one database to the list of monitored databases. Now If I try to add the other one , I get the message that the database is already being managed.
Can't we monitor two databases with same name on two different hosts?

you can... while saving the target,give a different name.. for eg target-2

Rman backup for rac by oem

Br,Hi,
DB : 10.2 and 11.2
How to schedule rman backup for cluster in OEM?How to schedule without OEM?
If one of the node failed,Is it possible to run in another node automatcially?
How to schduel export/datadump in rac by oem?
Br,
Raj

I Am not using oem, without oem you should write several scripts....
for linux hot backup(archive log enabled):
bck.sh
set ORACLE_SID=mydb
set ORACLE_HOME=....
rman target sys/.... @'.../bck.ora'
bck.ora
run
BACKUP AS COMPRESSED BACKUPSET FORMAT "..../db_%d_%T_%s_%p_%U.bak" INCREMENTAL LEVEL 0 DATABASE PLUS ARCHIVELOG DELETE INPUT FORMAT "...../archivelogBackup/arch_%d_%T_%s_%p_%U.bak";
delete force noprompt obsolete redundancy 3;
backup FORMAT '..../ctl_%d_%T_%s_%p_%U' current controlfile spfile;
And create executable job which instance_id=1 and will run your bck.sh script and create schedule for this job, when first node will down you must change instance_id attribute to second one, and be sure that all backup paths exists in all nodes.
Ramin Hashimzade

Preparing Backup-for two days

I have time machine on a partition on a 750 gb firewire drive. Had not problems prior to a few days ago,when it seemed to quit working. I erased everything on the partition, and started Time Machine fresh.
Its now been "preparing backup" for two days. Is this normal behaviour?
If I query the system log, there is not a single "backupd" entry in there, although when I tried it yesterday there was one to the effect of "Ownership not set on Time Machine Drive, setting Ownership"
Any one have any ideas?
Joe

Hi Joe and Welcome to Apple Discussions.
jcabaleiro wrote:
Its now been "preparing backup" for two days.
Well, you get the award for patience No, not normal behavior by any stretch.
jcabaleiro wrote:
"Ownership not set on Time Machine Drive, setting Ownership"
Choose your TM volume in Finder and get info using "-i" key combo. Under "Sharing & Permissions" (you may have to unlock the lock and authenticate) be sure:
Your name = Read & Write
Staff = Read & Write
everyoner = Read only
Now erase your TM partition and try again.
-mj
Message was edited by: macjack

[svn:fx-trunk] 5445: Fix for - @ copy tag for two methods with different arg lists not working.

Revision: 5445
Author: [email protected]
Date: 2009-03-19 17:47:57 -0700 (Thu, 19 Mar 2009)
Log Message:
Fix for - @copy tag for two methods with different arg lists not working.
Some changes for refactoring.
QE Notes: None.
Doc Notes: None.
Bugs: SDK-19975
tests: checkintests, asdoc
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19975
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

Revision: 5445
Author: [email protected]
Date: 2009-03-19 17:47:57 -0700 (Thu, 19 Mar 2009)
Log Message:
Fix for - @copy tag for two methods with different arg lists not working.
Some changes for refactoring.
QE Notes: None.
Doc Notes: None.
Bugs: SDK-19975
tests: checkintests, asdoc
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19975
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

I backed up two Iphones to the cloud and accidentally chose merge. How can I reset it to have seperate backups for each phone with the same ITUNES login?

I backed up two Iphones to the cloud and accidentally chose yes to merge the contacts from the two phones. How can I reset it to have seperate backups for each phone even though I am using the ITUNES login?

i merged two phones contracts are together how to get back to seperate

Restoring Rman backup on New Host with different directory structure

Hi,
I have a following scenario to clone the database.
1. clone the database on new server
2. source is non - ASM and target is ASM
3. On source incremental level 0 backup taken on disk connecting to catalog, the backup is moved to target host to different directory structure
4. source is running on 32-bit Linux two node Rac and Target is running on 64-bit Linux two node Rac
I did the following steps and getting below error:
1. I copied incremental Level 0 backup to target server(where we need to build new db) to different directory structure
2. On target i created pfile and build the instance, as dbf file are in multiple locations in source i put following tow parameters in init.ora of target database
*.db_file_name_convert =(/u02/oradata/app1p/,+QADATA2/udev/datafile),(/u03/oradata/app1p/,+QADATA1/udev/datafile),(/u12/oradata/app1p/,+QADATA1/udev/datafile,),(/u99/oradata/app1p/,+QADATA1/udev/datafile),(/u09/oradata/app1p/,+QADATA1/udev/datafile),(/u14/oradata/app1p/,+QADATA1/udev/datafile),(/u07/oradata/app1p/,+QADATA1/udev/datafile),(/u06/oradata/prod/,+QADATA1/udev/datafile'),(/u05/oradata/app1p/,+QADATA1/udev/datafile)
*.log_file_name_convert =("/u99/oradata/app1p/","+QADATA2/udev/onlinelog/")
3. connected to rman -->> started db in nomount -->> restored the controlfile --> cataloged the backup piece and then i am trying to restore
All the above steps i did using the Doc id *How To Restore Rman Backups On A Different Node When The Directory Structures Are Different [ID 419137.1]*
script i am using is :
RMAN> run {
2> set until time "to_date('DEC/20/2010 05:30:00','Mon/DD/YYYY HH24:MI:SS')";
3> allocate channel c1 device type disk;
4> allocate channel c2 device type disk;
5> allocate channel c3 device type disk;
6> allocate channel c4 device type disk;
7> set newname for datafile 1 to '+QADATA1/UDEV/DATAFILE';
8> set newname for datafile 2 to '+QADATA1/UDEV/DATAFILE';
9> set newname for datafile 3 to '+QADATA1/UDEV/DATAFILE';
10> set newname for datafile 4 to '+QADATA1/UDEV/DATAFILE';
11> set newname for datafile 5 to '+QADATA1/UDEV/DATAFILE';
12> set newname for datafile 6 to '+QADATA1/UDEV/DATAFILE';
13> set newname for datafile 54 to '+QADATA1/UDEV/DATAFILE';
set newname for datafile 63 to '+QADATA1/UDEV/DATAFILE';
14> 15> set newname for datafile 67 to '+QADATA1/UDEV/DATAFILE';
16> set newname for datafile 68 to '+QADATA1/UDEV/DATAFILE';
17> set newname for datafile 50 to '+QADATA1/UDEV/DATAFILE';
18> set newname for datafile 39 to '+QADATA1/UDEV/DATAFILE';
19> set newname for datafile 38 to '+QADATA1/UDEV/DATAFILE';
20> set newname for datafile 7 to '+QADATA1/UDEV/DATAFILE';
21> set newname for datafile 9 to '+QADATA1/UDEV/DATAFILE';
22> set newname for datafile 8 to '+QADATA1/UDEV/DATAFILE';
23> set newname for datafile 11 to '+QADATA1/UDEV/DATAFILE';
24> set newname for datafile 10 to '+QADATA1/UDEV/DATAFILE';
25> set newname for datafile 66 to '+QADATA1/UDEV/DATAFILE';
26> set newname for datafile 48 to '+QADATA1/UDEV/DATAFILE';
27> set newname for datafile 47 to '+QADATA1/UDEV/DATAFILE';
28> set newname for datafile 12 to '+QADATA1/UDEV/DATAFILE';
29> set newname for datafile 13 to '+QADATA1/UDEV/DATAFILE';
30> set newname for datafile 14 to '+QADATA1/UDEV/DATAFILE';
31> set newname for datafile 15 to '+QADATA1/UDEV/DATAFILE';
32> set newname for datafile 16 to '+QADATA1/UDEV/DATAFILE';
33> set newname for datafile 18 to '+QADATA1/UDEV/DATAFILE';
34> set newname for datafile 17 to '+QADATA1/UDEV/DATAFILE';
35> set newname for datafile 19 to '+QADATA1/UDEV/DATAFILE';
36> set newname for datafile 69 to '+QADATA1/UDEV/DATAFILE';
37> set newname for datafile 60 to '+QADATA1/UDEV/DATAFILE';
38> set newname for datafile 59 to '+QADATA1/UDEV/DATAFILE';
39> set newname for datafile 55 to '+QADATA1/UDEV/DATAFILE';
40> set newname for datafile 53 to '+QADATA1/UDEV/DATAFILE';
41> set newname for datafile 44 to '+QADATA1/UDEV/DATAFILE';
set newname for datafile 22 to '+QADATA2/UDEV/DATAFILE';
42> 43> set newname for datafile 21 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 20 to '+QADATA2/UDEV/DATAFILE';
44> 45> set newname for datafile 72 to '+QADATA2/UDEV/DATAFILE';
46> set newname for datafile 70 to '+QADATA2/UDEV/DATAFILE';
47> set newname for datafile 65 to '+QADATA2/UDEV/DATAFILE';
48> set newname for datafile 64 to '+QADATA2/UDEV/DATAFILE';
49> set newname for datafile 57 to '+QADATA2/UDEV/DATAFILE';
50> set newname for datafile 56 to '+QADATA2/UDEV/DATAFILE';
51> set newname for datafile 49 to '+QADATA2/UDEV/DATAFILE';
52> set newname for datafile 45 to '+QADATA2/UDEV/DATAFILE';
53> set newname for datafile 26 to '+QADATA2/UDEV/DATAFILE';
54> set newname for datafile 25 to '+QADATA2/UDEV/DATAFILE';
55> set newname for datafile 24 to '+QADATA2/UDEV/DATAFILE';
56> set newname for datafile 23 to '+QADATA2/UDEV/DATAFILE';
57> set newname for datafile 27 to '+QADATA2/UDEV/DATAFILE';
58> set newname for datafile 28 to '+QADATA2/UDEV/DATAFILE';
59> set newname for datafile 29 to '+QADATA2/UDEV/DATAFILE';
60> set newname for datafile 30 to '+QADATA2/UDEV/DATAFILE';
61> set newname for datafile 73 to '+QADATA2/UDEV/DATAFILE';
62> set newname for datafile 32 to '+QADATA2/UDEV/DATAFILE';
63> set newname for datafile 31 to '+QADATA2/UDEV/DATAFILE';
64> set newname for datafile 34 to '+QADATA2/UDEV/DATAFILE';
65> set newname for datafile 33 to '+QADATA2/UDEV/DATAFILE';
66> set newname for datafile 35 to '+QADATA2/UDEV/DATAFILE';
67> set newname for datafile 36 to '+QADATA2/UDEV/DATAFILE';
68> set newname for datafile 37 to '+QADATA2/UDEV/DATAFILE';
69> set newname for datafile 51 to '+QADATA2/UDEV/DATAFILE';
70> set newname for datafile 43 to '+QADATA2/UDEV/DATAFILE';
71> set newname for datafile 40 to '+QADATA2/UDEV/DATAFILE';
72> set newname for datafile 41 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 71 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 58 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 52 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 46 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 42 to '+QADATA2/UDEV/DATAFILE';
73> 74> 75> 76> 77> 78> set newname for datafile 62 to '+QADATA2/UDEV/DATAFILE';
79> set newname for datafile 61 to '+QADATA2/UDEV/DATAFILE';
80> set newname for datafile 74 to '+QADATA2/UDEV/DATAFILE';
81> restore database;
82> switch datafile all;
83> recover database;
84> alter database open resetlogs;
85>
86> release channel c1;
87> release channel c2;
88> release channel c3;
89> release channel c4;
90> }
Getting the following error, copied lines from the error i am getting.
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 27-DEC-10
released channel: c1
released channel: c2
released channel: c3
released channel: c4
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/27/2010 08:09:08
RMAN-06026: some targets not found - aborting restore
RMAN-06100: no channel to restore a backup or copy of datafile 74
RMAN-06100: no channel to restore a backup or copy of datafile 73
Please advice...
Thanks,
Tanveer Mohammed

If you would like, please refer the link:-
http://gavinsoorma.com/2010/04/creating-an-asm-duplicate-database-from-a-non-asm-database/

RMAN backup for two databases with similar DBID

Similar Messages

Maybe you are looking for