Oracle 9i Server : Job Scheduling not working as expected on Windos XP
Hi
I have a oracle 9i on my system. The underline OS for the system is
Windows XP.
I am trying to execute a oracle job on the oracle server but it seems
it is not getting executed. The same job if I am placing on a oracle
9i server installed on a Linux based OS, then I am getting the
expected outcome from it.
Can you please let me know, what should I do to get it executed on
Windos XP system.
One more thing, while installing the Oracle 9i, I had seen numerous
options but not very sure @ which one is used for what functionality.
It would be a greatful if you can send me some docs ( presentations
would be the best ) to understand the componenets.
We are also facing some problem while creating a new service.
What steps needs to be followed for the same.
Thanks and Regards,
Pratibh V Pokharna
Senior Software Engineer
HSBC GLT, Pune
M: 91-9226713562
Can you please let me know, what should I do to get
it executed on
Windos XP system.
What is JOB_QUEUE_PROCESSES parameter set in init.ora on Windos XP ?
It suppose to be more then 0 .
One more thing, while installing the Oracle 9i, I had
seen numerous
options but not very sure @ which one is used for
what functionality.
Check following doc for options and there functionality
http://download-west.oracle.com/docs/cd/B19306_01/license.102/b14199/options.htm#CIHDDBCG
Cheers,
Virag
Similar Messages
-
Weblogic job scheduler not works in cluster
I have configured a cluster with two managed servers. I have configured a datasource for job scheduler for this cluster
if I shut down one server job does not start on other server of cluster.
manged server logs give below exception
Exception in thread "Thread-211" java.lang.NullPointerException
at com.mysql.jdbc.Statement$1.run(Statement.java:96)
If I remove the option 'datasource for job scheduler' in Clsuter->MyServer->scheduling , this exception goes.
job scheduler table weblogic_timers also remains empty.
I feel that there is some issue with the schema of weblogic_timers. How can I see something in log to know what is the issue.
Please help I am struggling from a week.I have configured a cluster with two managed servers. I have configured a datasource for job scheduler for this cluster
if I shut down one server job does not start on other server of cluster.
manged server logs give below exception
Exception in thread "Thread-211" java.lang.NullPointerException
at com.mysql.jdbc.Statement$1.run(Statement.java:96)
If I remove the option 'datasource for job scheduler' in Clsuter->MyServer->scheduling , this exception goes.
job scheduler table weblogic_timers also remains empty.
I feel that there is some issue with the schema of weblogic_timers. How can I see something in log to know what is the issue.
Please help I am struggling from a week. -
ACE in Direct Server Return mode not working as expected
Dear all,
I configured my ACE as I found it here:
https://supportforums.cisco.com/docs/DOC-22555
the VIP is working, that means I can ping it, routing is working etc.
I created a loopback on the win2012 Server with the IP of the VIP. When I try now to test the LB with telnet on port 25 e.g. it is not working. direclty on the server it works, also in my last deployment where I use SNAT/PAT. But we want the real client IPs visible on the Exchange Server.
Where is my problem ? Any ideas would be great..
rserver host YY
description AServer-1
ip address 10.1.x.2
inservice
rserver host XX
description AServer-2
ip address 10.1.x.3
inservice
serverfarm host Mail
description Mail
transparent
predictor leastconns
rserver AServer-1
inservice
rserver AServer-2
sticky ip-netmask 255.255.255.255 address both Mail
timeout 5
replicate sticky
serverfarm Mail
class-map match-all Exchange_ALL
2 match virtual-address 192.168.1.1 any
class-map type management match-any remote_access
2 match protocol xml-https source-address 10.a.b.0 255.255.255.0
3 match protocol icmp source-address 10.a.b.0 255.255.255.0
5 match protocol ssh source-address 10.a.b.0 255.255.255.0
7 match protocol https source-address 10.a.b.0 255.255.255.0
8 match protocol snmp source-address 10.a.b.0 255.255.255.0
9 match protocol xml-https source-address 10.d.e.1 255.255.255.255
10 match protocol icmp source-address 10.d.e.1 255.255.255.255
11 match protocol ssh source-address 10.d.e.1 255.255.255.255
12 match protocol https source-address 10.d.e.1 255.255.255.255
13 match protocol snmp source-address 10.d.e.1 255.255.255.255
policy-map type management first-match remote_mgmt_allow_policy
class remote_access
permit
policy-map type loadbalance first-match mail
class class-default
sticky-serverfarm Mail
policy-map multi-match VLAN20
class Exchange_ALL
loadbalance vip inservice
loadbalance policy mail
loadbalance vip icmp-reply
interface vlan 2
ip address 10.a.b.2 255.255.255.0
access-group input ALL
service-policy input remote_mgmt_allow_policy
no shutdown
interface vlan 20
description Server
ip address 10.1.x.20 255.255.255.0
peer ip address 10.1.x.30 255.255.255.0
no normalization
access-group input ALL
service-policy input VLAN20
no shutdown
ft interface vlan 4
ip address 10.f.g.2 255.255.255.252
peer ip address 10.f.g.1 255.255.255.252
no shutdown
ft peer 1
heartbeat interval 300
heartbeat count 10
ft-interface vlan 4
ft group 1
peer 1
associate-context Admin
inservice
ip route 10.d.e.0 255.255.255.255 10.1.x.1
ip route 0.0.0.0 0.0.0.0 10.a.b.1Oh, I see. Very interesting indeed!
Do you get the BAD CHECKSUM and IP CHECKSUM OFFLOAD on the remote sites?
It could be this that is the problem. I read this and it seems as though it causes disconnects just as you experience too.
or just disable - it worked for some here, but for others, they upgraded the drivers of the NIC:
http://www.techsupportforum.com/forums/f137/wireshark-question-tcp-checksum-offload-248812.html
1. Open Device manager (right click "Computer" and click "Manage")
2. Click on "Device Manager"
3. Expand "Network Adapters"
4. Right click your network adapter
5. click "properties"
6. click the tab named "Advanced"
7. Find "IP Checksum Offload" and click it
8. Put the value to the right to "Disabled"
9. Find "TCP Checksum offload (IPvX)
10. Set the value to the right to "Disabled"
The Wiki Wireshark article had this:
In Windows, go to Control Panel->Network and Internet Connections->Network Connections, right click the connection to change and choose 'Properties'. Press the 'Configure...' button, choose the 'Advanced' tab to see or modify the "Offload Transmit TCP Checksum" and "Offload Receive TCP Checksum" values.
It seems like a server side issue rather than Load Balancer problem.
Hope this helps
Please rate useful posts and remember to mark any solved questions as answered. Thank you. -
Bachground job scheduling not working
Hi friends,
I wrote a program where it will fetch the details of production and the final report will generate a csv text file.
The program works fine when it is manually executed in se38. But when I schedule the job as a background job then I get the status as waiting where I can see the output of the program in the spool but the only problem is that it is not generating the txt file.
May be the problem is with configuring the printer settings.
Please help me in solving this issue.
Thanks,
kiranHi Kiran,
If you are using function module GUI_DOWNLOAD in your program, won't support in Background to generate file, it will work only in Front end.
If Useful reward points.
Regards,
Sunil -
Hi
I have a problem with a job that i was created.
it appears on dba_jobs select..... but nothing happens..
some days ago it's working fine.
what could be the problem
Sorry the bad english!
thanks
Post select:
263 USR_BASE USR_BASE USR_BASE 24-AUG-06 16:55:29 24-AUG-06 17:00:29 1 N SYSDATE+5/1440 0
usr_system.send_email;
NLS_LANGUAGE='AMERICAN' NLS_TERRITORY='AMERICA' NLS_CURRENCY='$' NLS_ISO_CURRENCY='AMERICA' NLS_NUMERIC_CHARACTERS='.,' NLS_DATE_FORMAT='DD-MON-RR' NLS_DATE_LANGUAGE='AMERICAN' NLS_SORT='BINARY'
0102000200000000that it's the strange thing....
if i run usr_system.send_email on SQL*PLUS that works fine..........
the previous post select message apears after do it manually.
if i only run the job... the rsult is this.
264 USR_BASE USR_BASE USR_BASE 24-AUG-06 17:19:34 0 N sysdate + 5/1440
usr_system.send_email;
NLS_LANGUAGE='AMERICAN' NLS_TERRITORY='AMERICA' NLS_CURRENCY='$' NLS_ISO_CURRENCY='AMERICA' NLS_NUMERIC_CHARACTERS='.,' NLS_DATE_FORMAT='DD-MON-RR' NLS_DATE_LANGUAGE='AMERICAN' NLS_SORT='BINARY'
0102000000000000
thanks -
Oracle rdf summary column is not working as expection
hi
I have Requirement to bring as below Format
emplo name
project name
project nnumber
cp_1
cp-2
...cp_25
mark
abc
123
20
30
10
mark
dfc
234
25
35
15
mark
45
65
25
for that i have created the Rdf and rtf
In Oracle Report
One group
data model query
group name G_project_number
and i create formula column to give the values in the cp_1 to cp_25
My RTF format
Employee name
project name
project number
cp_1
cp_2
..cp_25
<for each : g_project_number><?employee nmae?>
<?project name?>
<project number ?>
<?cf_1?>
<?cf_2?>
...<?cf_25?>
<?employeename?>
<?cs_1?>
<?cs_2?>
..<?cs_25?><end for -each>
summary columns in the same data model group
now report is showing as accumalate value for the columns
employee name
project name
project number
cp_1
cp-2
...cp25
mark
abc
123
20
30
10
mark
20
30
10
mark
dfc
234
25
35
15
mark
45
65
25
and my data model
one group
all info in that
Please guide me how to take forward this to achieve
Thanks in advancesPlease check the below link just to make sure all steps are taken care.
http://oraclemaniac.com/2012/08/15/how-to-add-a-descriptive-flexfield-dff-in-a-custom-oracle-apps-form/ -
Hi all,
i want some help with scheduler, the case is:
the database installed first time when the database locale in normal calendar,
the server is in hijri ,
when i create any job schedule dont work when next run comes,
please helploool,
thank for help :) ,
version=11.2
Every thing goes fine except one thing which is , why the job do not run automatically next time that specified in the create statement, i tried to find any error but i cant find one,
look when i use the Toad and click on "run job" the job run without any error,
"why the job do not run automatically"
i create the same job in another database in separate machine it work automatically, but the difference is that i do not use hijrah Calendar which i have to use it in the main database;
thank you -
SM36/37: Specification "After Job" does not work for Daily "periodcity"
I reviewed http://help.sap.com/saphelp_nw04/helpdata/en/20/2d513897110872e10000009b38f889/content.htm, which states what I am trying to do should work, but it does not.
Here's the deal:
1. I have two jobs: "A" and "B".
2. "A" runs Daily.
3. I set-up job "B" to run "After job" "A" in my SM36 definition.
Job "B" will run the next day, but never runs again after that even though job "A" continues to run "Daily" as it should.
Further info:
1. We have "Event-triggered" jobs that run fine, but the "After Job" designation doesn't seem to work ongoingly.
2. I can review both jobs "A" and "B" for any "Predecessor" or "Successor" jobs, and, the first jobs to run after the initial set-up DO reference each other (in other words, let's say I schedule job "B" to run "After job" "A" on Tuesday. After Tuesday's run, Job "A" sees job "B" as it's "Successor" job and job "B" sees job "A" as it's "Predecessor" job), but the definition doesn't last into the next day ONLY FOR JOB "B" (as I mentioned, job "A" always runs fine).
3. I can't set the "periodcity" for job "B" because, once I flag it to run "After Job" "A", the "period" options disappear.
4. One final tidbit: the variant for job "B" has a "key date" specified so the date is dynamic for each day the job runs. I can set up job "B" to run "Daily" with this variant and it runs fine, but I wanted it to run AFTER job "A" so it never runs if job "A" doesn't run. (At this point, it's becoming a matter of principal!)
Here's my question:
Why won't job "B" continue to run "Daily" after job "A" (a "Daily" job) runs?
Thanks in advance,
LaraPlease close this thread since you posted the same question here:
[SM36/37: Specification "After Job" does not work for Daily "periodcity"|SM36/37: Specification "After Job" does not work for Daily "periodcity"; -
Scheduled Brio/IR Jobs are not running as expected in EPM 11.1.2.2
Hi All,
We are observing some scheduled jobs are not running as expected,they are not running on the scheduled time.
Given below are more details.
We have 2 Jobs running at 6:00 AM daily based on single Recurring Time Event and it is observed that this jobs are not running on time(ex: 6:06 AM EST).
I tried verifying Consolidate Job Status in workspace admin options and the v8_RecurtimeEvent table for any miss in the 'Next Run Time',
but they were having the scheduled date/time of run.No clue from EPM Logs.
Interesting observation is the same jobs are running after updating the schedule time a little bit further(ex: 6:06 AM to 6:07 AM),but again after some days
the updated job(6:07 AM ) will stop running.
Thanks,Put the IR job logs in TRACE:32 mode which will give more information in the logs . Refer this document link to put in TRACE mode :http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_troubleshooting_1112200.pdf
Thanks,
KK -
Service (Oracle Fulfillment Server VIS_oracle12) can not start
in ERP12.0.4 on windows server 2003
service (Oracle Fulfillment Server VIS_oracle12) can not start
When I start the service it stops immediate or give me this message
This is vision instance
you can see the log of start and stop all services E:\oracle\VIS\inst\apps\VIS_oracle12\logs\appl\admin\log.
AC-50001: Error - java.lang.NullPointerException occurred while executing script - null stop
Raised by oracle.apps.ad.autoconfig.ServiceControl$Service
****************************************************Hi,
Please check the log file for more details about the error.
Was this working before? If yes, what changes have been done recently?
Any errors in the event viewer?
Regards,
Hussein -
how come when i make a web site and i test it in my local server it works fine when i tranfer to server certain things do not work example i used javascript to put in a prompt bar for a newsletter page at the server it did not work but at local it did also it works at MOZZILLA but not internet explorer i also have cs4 was wondering if there is a way to test a page in dreamweaver and then transfer THANK YOU X-FACTOR-MEDIA
In future, please try to make the subject line of your posts shorter. In this case the following would have been sufficient: "JavaScript works locally, but not on remote server".
Short, but meaningful subject lines make it easier for others to identify what your question is about, and often bring faster help. -
Scheduled jobs do not run as expected after upgrading to 10.2.0.3 or 4
FYI, we've had a ticket open for several days because our scheduled jobs (dbms_scheduler) would no longer run as scheduled after an upgrade to 10.2.0.4 on HPUX, couldn't find the solution by searching in metalink, nor did I find it here or using Google - obviously I wasn't searching correctly. There is a note id that references a set of steps that appears to have resolved our problem. I am putting this note out here so that if you encountered the same difficulty you may come across this note earlier in your troubleshooting efforts rather than later. The full title of the note is: 'Scheduled jobs do not run as expected after upgrading to either 10.2.0.3 or 10.2.0.4'. The Doc ID is: 731678.1.
Thanks - our ticket should be getting closed out on it (our dba will be updating it), the scheduler has been running reliably since we took the steps in the doc mentioned.
-
Lion Server DNS service not working for locally created zones. Caching working fine.
OS Lion Server DNS service not working for local zones. Was fine under Snow leopard server but Lion server upgrade has severely broken my DNS and web sites. Zones look fine under Server Admin but keep getting "query failed (SERVFAIL) for xxxx at /SourceCache/bind9/bind9-42/bind9/bin/named/query.c:3921" in the logs. BTW - Server Admin cant seem to see the log file either.
Surely someone actually tested that DNS still worked on Lion?I upgraded from Snow Leopard Server to Lion Server on day 01. I hit the same issue where, after the upgrade, my Lion Server stopped serving names for my private local domain.
I finally took a few minutes to figure out what was wrong. After turning on debug logging and looking through the logs, I found my particular issue, now resolved.
The issue I had was, when the domain initially was setup when I installed Snow Leopard Server, for some reason it created a zone just for the server (in my case, something like zone "s-01.mydomain.priv"), and a separate zone for all the other machines (zone "mydomain.priv", containing all the private IPs for my local domain). I never messed with it because it worked, but generally I would have put all of them in the same zone.
My zone "mydomain.priv" had a nameserver and mail exchanger entry for my server, s-01.mydomain.priv. I could see this in the Server Admin app on the DNS bubble, Zones tab, mydomain.priv selected, and the General Info panel. This was fine in Snow Leopard. This was failing the zone load in the updated bind for Lion Server, though. The issue was that the "mydomain.priv" zone was referencing the s-01.mydomain.priv server, which was not defined in the "mydomain.priv" zone but rather in the "s-01.mydomain.priv" zone.
My fix:
1. In Server Admin, add the server to the zone "mydomain.priv". I put an A record (Add Machine) in the "mydomain.priv" zone for my server named s-01.mydomain.priv.
2. shut down DNS on the OS X Lion Server (hit the Stop DNS button on Server Admin).
3. edit /etc/named.conf by hand, removing the specialized zones that contianed just the server. In this case, it would be the section titled 'zone "s-01.mydomain.priv"' and the section titled 'zone "3.10.1.10.in-addr.arpa"'. Your in-addr.arpa zone name will change based on whatever your server IP address was. My internal one happened to have s-01.mydomain.priv mapped to 10.1.10.3.
4. Once the specialized zones for just the server were removed, I started the DNS up again. Instead of serving four zones as it had in OS X Snow Leopard Server, it now servers two zones. And, now, it is resolving my local machines for the mydomain.priv zone.
YMMV. I did note that it wasn't totally necessary to do step 3, but I never really understood the need for the specialized domain, and keeping it around would have a copy of data that would just confuse things.
Hope that helps. That's been the only hiccup I've noticed updating to OS X Lion Server thus far. -
TCP Window sizing not working as expected for Windows server 2008 R2 SP1
Hi ,
TCP window size is not working as expected. It is varying . Aplied the hotfix suggested by Microsoft and set the multipliccation factor as 1.The window size is not getting auto tuned based on the client machine. The data transfer rate is getting degraded.
Please help.
Thanks,
Pro1962Hi,
I think window auto-tuning is enabled.
You can disable it by running the following commend.
netsh interface tcp set global autotuninglevel=disabled
Hope this helps. -
DB Adapter polling as singleton process is not working as expected
Am using poller DB adapater to control the transaction per seconds to the downstream system and i want this poller process as singleton (One instance should be in running state at a time).
As suggested in oracle documents , below is the parameters configured in composite.xml file.
<service name="polling_Mange_Alert_Events"
ui:wsdlLocation="polling_Mange_Alert_Events.wsdl">
<interface.wsdl interface="http://xmlns.oracle.com/pcbpel/adapter/db/Application1/int_app_manageAlerts/polling_Mange_Alert_Events#wsdl.interface(polling_Mange_Alert_Events_ptt)"/>
<binding.jca config="polling_Mange_Alert_Events_db.jca">
<property name="singleton">true</property>
</binding.jca>
<property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
<property name="jca.retry.interval" type="xs:int" many="false"
override="may">1</property>
<property name="jca.retry.backoff" type="xs:int" many="false"
override="may">2</property>
<property name="jca.retry.maxInterval" type="xs:string" many="false"
override="may">120</property>
</service>
Below is the JCA file parameters configured :
<adapter-config name="polling_Mange_Alert_Events" adapter="Database Adapter" wsdlLocation="polling_Mange_Alert_Events.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/vff-int-fus" UIConnectionName="PT_APPINFRA" adapterRef=""/>
<endpoint-activation portType="polling_Mange_Alert_Events_ptt" operation="receive">
<activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
<property name="DescriptorName" value="polling_Mange_Alert_Events.ManageAlertEvents"/>
<property name="QueryName" value="polling_Mange_Alert_EventsSelect"/>
<property name="MappingsMetaDataURL" value="polling_Mange_Alert_Events-or-mappings.xml"/>
<property name="PollingStrategy" value="LogicalDeletePollingStrategy"/>
<property name="MarkReadColumn" value="TRANSACTION_STATUS"/>
<property name="MarkReadValue" value="Processing"/>
<property name="PollingInterval" value="10"/>
<property name="MaxRaiseSize" value="5"/>
<property name="MaxTransactionSize" value="5"/>
<property name="NumberOfThreads" value="1"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="MarkUnreadValue" value="Pending"/>
</activation-spec>
</endpoint-activation>
</adapter-config>
This poller process is running on clustered environment (2 soa nodes) and it is not working as expected as singleton process.
Please advise to solve this issue ?Hi,
1.Set Singleton property outside <binding.jca> like this:
<binding.jca config="polling_Mange_Alert_Events_db.jca"/>
<property name="singleton">true</property>
<property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
<property name="jca.retry.interval" type="xs:int" many="false"
2.Also you can try setting these values in jca file:
<property name="RowsPerPollingInterval" value="100"/>
<property name="MaxTransactionSize" value="100"/>
3. try to increase the polling interval time.
Regards,
Anshul
Maybe you are looking for
-
DVI to VGA adapter, monitor says "input not supported"
I have just received my MBP yesterday and, when I attempted to attach it via DVI to VGA adapter to my Acer AL2016W flat panel LCD, the monitor told me "input not supported". I was under the impression VGA is VGA is VGA. Perhaps I am mistaken. There i
-
Hi all, This weekend I had issues restoring my MacBook pro using Time Machine. I was left with question marks in the dock for the folloing apps in Bold, the others are not on the dock but they could not be found.. 1. Safari 2. LaunchPad 3. Missing Co
-
Hi i am new to java web application, i am running JSP(edited in notepad) in tomcat <html> <head> <title>first jsp page</title> </head> <body> <%! String st = "shyam your JSP Code" %> Welcome ::<%= st %> </body> </html> i saved this jsp as first.jsp a
-
HT4009 What is the problem if there is an error in initiating purchse with iTunes?
Initializing purchse with iTunes is a frequent dialogue box coming out whenever I make purchase of items/characters or gems from the Skylnders Lost Islands game.
-
Say there are 10 fields that are a combination of combo boxes and text fields that represent different columns from multiple tables in the database. Based on the what the user chooses say either 1 , 1+2, 1+3+4 etc would mean different queries with a