Oracle BAM - Enterprise Message Source - Message Type Extendability

Hi,
Currently the message types that are accepted are TextMessage and MapMessage, I have a requirment to parse ObjectMessage. Is it possible to extend the EMS to also parse ObjectMessages ? Just reply if you require additional information....thanx in advance.
Warren

ferp - I got this to work with
JNDI Service Provider URL: http://localhost
When I add the port
JNDI Service Provider URL: http://localhost:23891
I cannot get my EMS to start.
Hopefully this should fix your issue.
Sudeep.

Similar Messages

Trouble defining BAM Enterprise Message Source for BEA WebLogic Server

Hi all,
I've just started to play a little with Oracle BAM Architect.
I've WLS 10.0 and Oracle BAM Architect 10g release 3.
On Oracle BAM Architect I've defined an Enterprise Message Source for BEA WebLogic Server as follows:
Name: ALSBSource
Owner: ...
Type: BEA WebLogic Server
Initial context factory: weblogic.jndi.WLInitialContextFactory
JNDI Service Provider URL: t3://mypc:7001
TopicConnectionFactory name: com.myConnectionFactory
Topic name: com.myBAMTopic
JMS message type: TextMessage
Durable subscriber name: BAMSubscriber
Client ID: BAMSubscriber
Name | Flow name | Type | Max size | Formatting
content | BAM | String | 1024 | (none)
On WLS 10.0 I've defined the required JMS stuff.
On Oracle Design Studio I've defined a plan that includes:
- an Oracle BAM Enterprise Message Receiver from which I've selected the above 'ALSBSource' Enterprise Message Source
- a simple Grid
I've connected the BAM Enterprise Message Receiver to the Grid and clicked on 'Update' button.
When I try to publish a message on 'com.myBAMTopic' I don't see anything on the grid defined in the Oracle Design Studio.
The first question is about the definition of an Enterprise Message Source for BEA WebLogic Server in the Oracle BAM Architect.
I did not change the Oracle BAM Architect classpath or Oracle Design Studio classpath adding the weblogic.jar, because no error has been raised during the configuration of the message source and the plan. Should I update Oracle classpath with the weblogic.jar ?
Did I forget any other step ?
I thank you in advance for any feedback.
Regards
ferp

ferp - I got this to work with
JNDI Service Provider URL: http://localhost
When I add the port
JNDI Service Provider URL: http://localhost:23891
I cannot get my EMS to start.
Hopefully this should fix your issue.
Sudeep.

Revised product name: "Oracle GlassFish Enterprise Message Queue"

Hello,
the release notes for OpenMQ 4.5 build 16 include a note about a revised product name, "Oracle GlassFish Enterprise Message Queue". Is this planned to be the future product name for the commercial product (the product formerly known as Java System Message Queue), or is this meant to be the name for both versions?
Many thanks in advance,
Michael Justin
Edited by: 801285 on 10.10.2010 01:49

Hi all,
I have finally solved the problem, it seems somehow on my windows home premium I can't run the install script (on H:\ ) from the command line. I manually ran the batch script by double clicking on it, it ran fine and I was finally able to install ORE (server + supported + client) on my laptop. Now the connection -- followed through the manual, created user and granted all the roles. Now that I want to test the connection, I open R console and below are the input and output error message though it seems I can connect to the database:
R>
R> library(ORE)
Loading required package: OREbase
Attaching package: ‘OREbase’
The following object(s) are masked from ‘package:base’:
cbind, data.frame, eval, interaction, order, paste, pmax, pmin, rbind, table
Loading required package: OREstats
Loading required package: MASS
Loading required package: OREgraphics
Loading required package: OREeda
Loading required package: OREdm
Loading required package: lattice
Loading required package: OREpredict
Loading required package: ORExml
R>
R>
R>
R> ore.connect(user = 'scott', sid = 'sinha', host = 'win7', password = 'tiger', port = 1521, all = T)
Error in .oci.GetQuery(conn, statement, data = data, prefetch = prefetch, :
ORA-06520: PL/SQL: Error loading external library
ORA-06522: Unable to load DLL
ORA-06512: at "RQSYS.RQEVALIMPL", line 17
ORA-06512: at "RQSYS.RQEVALIMPL", line 14
ORA-06512: at line 4
R>
R>
R> ore.is.connected()
[1] TRUE
R> I get the exact same error when I try to use even the ORE user "rquser". Any suggestion how to resolve this error?
Thanks,
Sourabh

Conn't connect to Oracle Bam Enterprise link Design Studio....please help!

i'm try to connect to EL Design studio , but this msg was apper.
[SERVERERROR] Error from Server: ORA-01017: invalid username/password; logon denied
Host String: oraclebam
Server Type: Oracle
User Name: orasagent
Information from server:
1017
0
oraclebam
[Oracle BAM Enterprise Link error code: SA -- 0x1, RW -- 0x5]
Unable to connect to the Repository.
[Oracle BAM Enterprise Link error code: IS -- 0x7, IS -- 0x19]
conn't understande what is the Repository
is Repository tools must be install on my pc or bult in oracle bam.
plz help.

Self Answer: reinstall the BAM, and only check the repository install, don't move the data service and it works.

Creation of an Enterprise Messae Source Type

Hi guys,
has anyone of you tried before connecting BAM to Joram. Joram should be used as JMS provider. I'll post my confirguration:
Display name:
Joram
ID:
EMST.JORAM
CLSID of Admin implementation:
{CAC27017-40A2-4AD4-9BAC-16D01578A192}
CLSID of Receiver implementation:
{CAC27017-40A2-4AD4-9BAC-16D01578A192}
CLSID of Sender implementation:
{CAC27017-40A2-4AD[/i]4-9BAC-16D01578A192}
Startup parameter:
JMS*".;C:\Oracle\OracleBAM\OC4J\j2ee\home\oc4j.jar;C:\Oracle\OracleBAM\OC4J\j2ee\home\oc4jclient.jar;C:\Oracle\OracleBAM\OC4J\j2ee\home\lib\oc4j-internal.jar;C:\Oracle\OracleBAM\OC4J\j2ee\home\lib\ejb.jar;C:\Oracle\OracleBAM\OC4J\j2ee\home\lib\servlet.jar;C:\Oracle\OracleBAM\OC4J\j2ee\home\lib\jta.jar;C:\Oracle\OracleBAM\OC4J\j2ee\home\lib\jms.jar;C:\Oracle\OracleBAM\OC4J\j2ee\home\lib\javax88.jar;C:\Oracle\OracleBAM\OC4J\j2ee\home\lib\javax77.jar;C:\Oracle\OracleBAM\OC4J\j2ee\home\lib\jmxri.jar;C:\Oracle\OracleBAM\OC4J\j2ee\home\lib\jmx_remote_api.jar;C:\Oracle\OracleBAM\OC4J\j2ee\home\lib\adminclient.jar;C:\Oracle\OracleBAM\OC4J\j2ee\home\ojspc.jar;C:\Oracle\OracleBAM\OC4J\j2ee\home\jazn.jar;C:\Oracle\OracleBAM\OC4J\opmn\lib\optic.jar;C:\Oracle\OracleBAM\OC4J\rdbms\jlib\aqapi.jar;"".;c:\TIBCO\JMS\clients\java\tibjms.jar;c:\TIBCO\JMS\clients\java\jms.jar;c:\TIBCO\JMS\clients\java\jndi.jar;c:\TIBCO\JMS\clients\java\jta-spec1_0_1.jar;c:\TIBCO\JMS\clients\java\jcert.jar;c:\TIBCO\JMS\clients\java\jnet.jar;c:\TIBCO\JMS\clients\java\jsse.jar;c:\TIBCO\JMS\clients\java\tibcrypt.jar;"".;C:\Program Files\IBM\WebSphere MQ\Java\lib\com.ibm.mq.jar;C:\Program Files\IBM\WebSphere MQ\Java\lib\com.ibm.mqjms.jar;C:\Program Files\IBM\WebSphere MQ\Java\lib\connector.jar;C:\Program Files\IBM\WebSphere MQ\Java\lib\jms.jar;C:\Program Files\IBM\WebSphere MQ\Java\lib\jndi.jar;C:\Program Files\IBM\WebSphere MQ\Java\lib\jta.jar;C:\Program Files\IBM\WebSphere MQ\Java\lib\providerutil.jar;C:\Program Files\IBM\WebSphere MQ\Java\lib\fscontext.jar;C:\Program Files\IBM\WebSphere MQ\Java\lib\ldap.jar;"".;C:\Program Files\SonicSoftware\SonicMQ\lib\sonic_Client.jar;C:\Program Files\SonicSoftware\SonicMQ\lib\gnu-regexp-1.0.6.jar;C:\Program Files\SonicSoftware\SonicMQ\lib\jaxp.jar;C:\Program Files\SonicSoftware\SonicMQ\lib\xerces.jar;C:\Program Files\SonicSoftware\SonicMQ\lib\tools.jar;C:\Program Files\SonicSoftware\SonicMQ\lib\providerutil.jar;C:\Program Files\SonicSoftware\SonicMQ\lib\fscontext.jar;C:\Program Files\SonicSoftware\SonicMQ\lib\sslj.jar;C:\Program Files\SonicSoftware\SonicMQ\lib\jsafe.jar;C:\Program Files\SonicSoftware\SonicMQ\lib\certj.jar;"".;C:\bea\weblogic700\server\lib\weblogic.jar;"".;C:\eGate\client\classes\stcjms.jar;C:\eGate\client\JRE\1.3\lib\ext\fscontext.jar;C:\eGate\client\JRE\1.3\lib\ext\providerutil.jar;C:\eGate\client\ThirdParty\sun\jms.jar;C:\eGate\client\ThirdParty\sun\jndi.jar;C:\eGate\client\ThirdParty\sun\jta.jar;"".;C:\JNDI-Directory_WebMethods\fscontext.jar;C:\JNDI-Directory_WebMethods\providerutil.jar;C:\JNDI-Directory_WebMethods\javax.jms.jar;C:\Program Files\webMethods6\Broker\lib\BrokerJMS60.jar;C:\Program Files\webMethods6\common\lib\client60.jar;C:\Program Files\webMethods6\Broker\lib\xerces.jar;C:\Programme\SOPware\Devbox\devbox-modules\joram\ship\lib\joram-client.jar;C:\Programme\SOPware\Devbox\devbox-modules\joram\ship\lib\joram-shared.jar;C:\Programme\SOPware\Devbox\devbox-modules\joram\ship\lib\ow_monolog.jar;C:\Programme\SOPware\Devbox\devbox-modules\joram\ship\lib\JCup.jar;"
The next step is the creation of the Enterprise Message Source:
[i]Name:
MyEMS
Owner:
VM\admin
Type:
Joram
InitialContextFactory:
fr.dyade.aaa.jndi2.client.NamingContextFactory
JNDI Service Prvider URL:
localhost:16400
TopicConnectionFactory Name:
TopicConnectionFactory
Topic Name:
Topic
JMS Message Type:
TextMessage
with one field as a String with filesize=4000.
When I create a plan to insert in a simple Grid and update this plan I am getting the following error:
Unable to create Message Receiver COM object.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x4B]
[W32 HRESULT: 0x80004002]
Interface not Supported
Error creating Message Receiver COM object.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x4C]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Unable to create Message Receiver COM object.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x4B]
[W32 HRESULT: 0x80004002]
Interface not Supported
Error creating Message Receiver COM object.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x4C]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "NotificationReceiverPlan" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
Did I miss anything in my configuration?
Regards,
Christoph

Hi,
I dont see a point in having this statement
swc_set_table event_container 'INTERNAL_TABLE' t_cnp_container. Infact it is not needed !!
SWE_EVENT_CREATE like any other FM, take a
lt_var type standard table of SWCONT.
ls_var type SWCONT.
fill your ls_var with all fields and append it to lt_var each time and pass lt_var to event_table of SWE_EVENT_CREATE. It should work !!
However, suggested way is to use SAP_WAPI_CREATE_EVENT instead of SWE_EVENT_CREATE from ECC 5.0 onwards. There are fe concerns with SWE_EVENT_CREATE mainly with respect to commit and persistancy. Better we should use SAP_WAPI* as much as possible from ECC 5.0.
Try above and Good Luck !!
Regards
Krishna Mohan

Cannot access Oracle BAM Start Page

Although Oracle BAM installation completed without any error and I can start BAM related services without any issue, I cannot access Oracle BAM Start Page because of the following error.
You are unable to connect to the Oracle BAM services. Contact your system administrator if the error persists. [ErrorSource="ActiveDataCache", ErrorID="ADCServerConnectionError"] The requested name is valid, but no data of the requested type was found [ErrorSource="mscorlib"] Debugging information: Oracle.BAM.ActiveDataCache.ServerUnavailableException: You are unable to connect to the Oracle BAM services. Contact your system administrator if the error persists. ---> System.Net.Sockets.SocketException: The requested name is valid, but no data of the requested type was found Server stack trace: at System.Net.Dns.GetHostByName(String hostName) at System.Net.Dns.Resolve(String hostName) at System.Runtime.Remoting.Channels.RemoteConnection..ctor(SocketCache socketCache, String machineAndPort) at System.Runtime.Remoting.Channels.SocketCache.GetSocket(String machineAndPort) at System.Runtime.Remoting.Channels.Tcp.TcpClientTransportSink.SendRequestWithRetry(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream) at System.Runtime.Remoting.Channels.Tcp.TcpClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream) at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Oracle.BAM.ActiveDataCache.Common.Core.IDataStore.Exists(String strDatasetID) at Oracle.BAM.ActiveDataCache.Remoting.ServerWrapper.Exists(String strDatasetID) --- End of inner exception stack trace --- at Oracle.BAM.ActiveDataCache.Remoting.ServerWrapper.Exists(String strDatasetID) at Oracle.BAM.ActiveDataCache.SystemType.LoadSchema(Boolean bCache) at Oracle.BAM.ActiveDataCache.Context.LoadUser() at Oracle.BAM.ActiveDataCache.Context..ctor(String strDomain) at Oracle.BAM.Web.WebPage.CreateContext(String strUserName) at Oracle.BAM.Common.Threading.SynchedHash.GetObject(String strKey, Object oLock) at Oracle.BAM.Common.Threading.SynchedHash.GetObject(String strKey) at Oracle.BAM.Web.WebPage.GetContext() at Oracle.BAM.StartPage.StartUp.Initialize()
Do you have any idea ?
Although I checked ActiveDataCache.log, it is empty ( looks no problem ).
My environment as below.
OS : Windows 2003 R2 Enterprise Edition Service Pack 1
Oracle version : 10.1.0.2
Oracle BAM version : 10.1.2
Thanks in advance

Hi,
I've installed BAM 10.1.2 on Windows 2000 Professional. I have IIS 5.0 and Microsoft 1.1 .Net Framework installed on my PC. I'm able to use the Design Studio and Admin from Oracle BAM Enterprise Link. The installation completed successfully but I'm still not able to open the BAM start page.
I see the error:
Server Error in '/' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
Source Error:
Line 263: 
Line 264: 
Line 265: <authentication mode="Windows">
Line 266:
Line 267: </authentication>
Source File: C:\OracleBAM\BAM\web.config Line: 265
I've checked that OracleBAM appears as a virtual directory in IIS (from Personal Web Server) and there were no errors in installation. The Access Permissions is set to 'Read' and Application Permissions to 'Scripts'
Should the authentication mode take any other parameters ?
Let me know what can be done to resolve this issue.
Thanks in advance !

Cannot log in the BAM Enterprise Link Design Studio

Hi, all,
I installed a BAM 10.1.3.3 in Windows 2003 SP1 server. And I cannot log in the BAM Enterprise Link Design Studio with the following errors:
[SERVERERROR] Error from Server: ORA-00942: table or view does not exit
Information from server:
942
0
oraclebam
[Oracle BAM Enterprise Link error code: SA -- 0x1, RW -- 0x5]
Unable to locate the repository.
[Oracle BAM Enterprise Link error code: RP -- 0x11, RP -- 0x102]
Unable to connect to the Repository.
[Oracle BAM Enterprise Link error code: IS -- 0x7, IS -- 0x19]
Thanks in advance for your ideas and suggestions.
Best Regards,
Bill

Self Answer: reinstall the BAM, and only check the repository install, don't move the data service and it works.

Unable to create Oracle BAM Sinks in Design Studio on Windows XP Profession

Hi,
I am unable to create any Oracle BAM Sink in Design Studio. I am getting this error, when trying to drag BAM Sink to my plan:
Failed to create the Transform COM object.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x5B]
Problem in step "Untitled, created 13. 11. 2007 16:39:07".
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x2, PlanMgr -- 0x32]
Error while preparing the Plan for execution.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0x11]
The Design Studio is installed on notebook with Windows XP Professional SP2.
On the W2K server with Data Flow Service installed it seems to be OK.
K.

Select Unique TO_CHAR(T1.TRANSDATE, 'YYYY') as YEAR,
TO_CHAR(T1.TRANSDATE, 'MM') as MONTH,
TO_CHAR(T1.TRANSDATE, 'MONTH') as MONTHNAME, T1.TRANSDATE
From SALES T1; <--bad
from SALES T1 <--correct
it should not have ";" at the end of the statement.

Oracle BAM

You do not have permission to perform the requested action.
[ErrorSource="ActiveDataCache", ErrorID="ADCPermissionMissing"]
[Oracle BAM Enterprise Link error code: 0x79 -- 0x1, 0x79 -- 0x1]
Error while calculating the output schema for the step 'update receiveRD'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Error while calculating the output schema for the step 'Oracle BAM Insert'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "BPELOrderBookingPlan" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
Iam getting this error while running a simulator which will post the data to EMS. It fails to post the same data in to the Data Object. Pls guide me.
Prakash Singh.

Hi,
Check this....http://www.oracle.com/technetwork/middleware/bam/technote-bam-integrationwithobiee-134095.pdf
Assign points if helpful
Regards,
Srikanth

Unable to load DLL ELCOMProxies.dll while creating Enterprise Message Sourc

Hi All,
I am getting following error when I try to create Enterprise Message Source of type "Oracle (AS JMS and OJMS)”.
Oracle.BAM.Common.Exceptions.CommonException: Unable to create Message Receiver Admin COM object: Error=System.DllNotFoundException: Unable to load DLL (ELCOMProxies.dll).
at Oracle.BAM.Middleware.Persistence.COMProxyGeneral.fnCreateObject(String strCLSIDObject, String strCLSIDInterface, IntPtr& ipInterface, String& rstrErrorCode)
at Oracle.BAM.Middleware.Persistence.COMProxyGeneral.Create(String strCLSIDObject, String strCLSIDInterface)
at Oracle.BAM.Middleware.Persistence.EnterpriseMessageSourceTypes.RetrieveCharacteristics()
at Oracle.BAM.Middleware.Persistence.EnterpriseMessageSourceTypes.InternalLoad(SystemObject soEMST)
at Oracle.BAM.Middleware.Persistence.EnterpriseMessageSourceTypes.LoadByID(String strID)
at Oracle.BAM.Architect.Sources.CreateEdit()
Please let me know if anybody has any idea about it.
Thanks,
Netra

Hiya,
The error is because the app tried to import that driver but it was not found. So, you will need
to recheck your project setup, provide locations for imports, etc. I am not familar with Intermec Printer.
The code snippet does not show any information about the DLL import, check there too.
Hope this helps. :)

WL JMS - Enterprise Message Source

Hi,
We have recently installed Oracle BAM 10.1.3. When we try to configure an Enterprise Message Source, we get only "Map Message" and "Text Message" in the drop downs for JMS Message Type.
What needs to be done to get other JMS message types such as Object Message in the drop down?
Any help in this regard will be highly appreciated.
Thanks,
KM

Hello. In the current version of BAM - we support only TextMsg type, your incoming msg on JMS should be 'xml format' only. Also note that we support only JMSTopic in current version. See webpage for full details, docs, technotes, and samples

Cannot find ELCOMProxies.dll error when going to Enterprise Message Sources

Hi All,
I installed BAM 10.1.3 and everything seems to be working but when I access the Enterprise Message Sources I get following error:
Unable to create Message Receiver Admin COM object: Error=System.DllNotFoundException: Unable to load DLL (ELCOMProxies.dll). at Oracle.BAM.Middleware.Persistence.COMProxyGeneral.fnCreateObject(String strCLSIDObject, String strCLSIDInterface, IntPtr& ipInterface, String& rstrErrorCode) at Oracle.BAM.Middleware.Persistence.COMProxyGeneral.Create(String strCLSIDObject, String strCLSIDInterface)
Source: "Common" ID: "EL_MsgAdminCreate"
I researched and found a bug that stated this may happen after installation but solved after rebooting. In m y case I keep getting the same error and it prevents me to create new sources.
I am working in Win XP SP 2.
Any ideas?

Correcct this seems to be unsuccessful or incorrect installation (or deinstall and reinstall). You have to contact oracle support or local oracle rep for a clean resolution.

Source message Message Type: POR does not exist in software component versi

HI All,
I have a .tpz file exported from an SRM 4.0 PI system which i have imported in SRM 7.0 ECC 6.0 PI.
I have imported the .tpz file through the import through "client" option.
I am able to open all the objects but i am not able to open the Message mappings.....
It is throwing the following error:
Source message Message Type: PurchaseOrderRequest does not exist in software component version xx_xx_PO_PROCESSING, 1.0 of xx.com Check whether software component version xx_xx_PO_PROCESSING, 1.0 of xx.com is in the Enterprise Services Repository. Import this or a newer version if necessary.
This needs to resolved very urgently...
Kindly help...
Thanx in advance..
Nandan

Hi,
I'd say you need to import some other SWCV which has all the IDOC typos you use in your scenario
probably this is a prerequisite for importing your SWCV
I don't think this is related to sp level or anything like that
it's just that SWCV is missing
Regards,
Michal Krawczyk

Pre-processing in Enterprise Message Source in BAM11g

Can anyone provide me sample example on Pre-processing in Enterprise Message Source
XML Formatting-->Pre-Processing-->Advanced formatting options ?That means sample example to invoke preprocessing logic.Thanks in advance.

Suppose, you have JMS XML message as:
<Data>
<ServiceDetails>
<ServiceName>Query<ServiceName>
</ServiceDetails>
<ObjectDetails>
<Name>CustomerPartyID<Name>
<Key>123</Key>
<ParentKey>345</ParentKey>
<Description>New Customer</Description>
</ObjectDetails>
<Data>
Ouput message you would like to be:
<?xml version="1.0" encoding="UTF-8"?>
<Data>
<Name>CustomerPartyID</Name>
<Key>123</Key>
<ParentKey>345</ParentKey>
<Data>
You can use the following xsl to achieve that:
<xsl:stylesheet version = '1.0'
xmlns:xsl='http://www.w3.org/1999/XSL/Transform'>
<xsl:template match="Data">
<xsl:for-each select="ObjectDetails">
<Data>
<Name>
<xsl:value-of select="Name"/>
</Name>
<Key>
<xsl:value-of select="Key"/>
</Key>
<ParentKey>
<xsl:value-of select="ParentKey"/>
</ParentKey>
</Data>
</xsl:for-each>
</xsl:template>
</xsl:stylesheet>
Of course, XSL is very powerful and you can achieve very complex transformations of your xml with that. Any xsl tutorial can help you with that.
Thanks,
Vishal
BAM Dev

Creation of New Message Type for Extended IDoc

Dear Friends,
I want to create New Message Type for MATMAS and want to Active Change Pointers accordingly. Thru this Message Type how can I able to use Extended IDoc which I have created for Basic Idoc Type MATMAS05.
I am Sending Data from SAP to XI ; Any one can help me in this How can I create the Message Type with the IDoc Extn .
for Change Pointers.
Warm Regards,
Naveen Mutyapu.

Hi naveen mutyapu,
see these links
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
http://www.allinterview.com/rss/interview-questions/new/SAP-ALE-IDocs.xml
happy learning.
thanks
karthik

Oracle BAM - Enterprise Message Source - Message Type Extendability

Similar Messages

Maybe you are looking for