Oracle BPM (former ALBPPM) Hybrid LDAP Support for IDM

So far ALBPM Enterprise (now Oracle BPM) had its best (by far) setup on a hybrid setting. In this case, ALBPM Directory had its own database, but authentication (users & groups) was set against an LDAP server (Sun One or Active Directory).
Are there any plans to extend the hybrid configuration to Oracle IDM LDAP?
Thanks.

Create a new user oracle and proceed with the installation
--> useradd -g oinstall oracle
If your are forwarding your GUI using xming or vnc you would need to copy the xauth of root user and set it to oracle
[server1:root] xauth list
bangvmpllE.com/unix:11 MIT-MAGIC-COOKIE-1 b23d63374fe25a3577751b6b95b2210e
[server1:root] sudo su - oracle
[server1:oracle] export DISPLAY=localhost:10.0
[server1:oracle] xauth add bangvmpllE.com/unix:11 MIT-MAGIC-COOKIE-1 b23d63374fe25a3577751b6b95b2210e

Similar Messages

Oracle VM Server 2.2.1 - support for NTFS external drive?

Hi,
Another "newbie" question here... we have just installed Oracle VM Server 2.2.1 on a Dell box and now we want to install some Template VM's that we downloaded. The problem is - they are on an external Hard Drive that is an NTFS drive.
So - when we connect the drive it's detected ok - but we can't mount it as the NTFS filesystem support doesn't appear to be installed as standard?
If it isn't - how/where do we get NTFS support into the Kernel?
Any help appreciated.
Regards,
Bren

Hi Bren,
unfortunately as far as I know native NTFS support is in RHEL/OEL 5.4. And since Oracle VM is based on OEL 5.3 there is no direct support for NTFS.
However there is an "unofficial" and probably not supported possibility to install FUSE and get NTFS3g to get what you want:
Point the yum update server to OVS 2.2.1 and OEL 5.3 (on which OVS is based) on public-yum.oracle.com:
# vi /etc/yum.repos.d/public-yum-el5.repo
[el5_u3_base]
name=Enterprise Linux $releasever U3 - $basearch - base
baseurl=http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/3/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-el5
gpgcheck=1
enabled=1
[ovm22_2.2.1_base]
name=OracleVM 2 - 2.2.1 - $basearch - base
baseurl=http://public-yum.oracle.com/repo/OracleVM/OVM2/2.2.1/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-el5
gpgcheck=1
enabled=1
Then you are able to install gcc compiler, which is needed for FUSE:
# yum install gcc
Insert the OVS Server CD or use the OVS repository from public-yum to install the develop kernel:
# yum install kernel-ovs-devel
Download the required FUSE packages and NTFS3g:
http://ntfs-3g.org
http://fuse.sourceforge.net/
# wget http://marush.com/wp-content/uploads/2009/04/ntfs-3g-200944-el5i686.rpm
# wget http://switch.dl.sourceforge.net/sourceforge/fuse/fuse-2.7.4.tar.gz
Install Fuse:
# tar -xvzf fuse-2.7.4.tar.gz
# cd fuse-2.7.4
# ./configure
# make
# make install
# modprobe fuse
# cd ..
Install NTFS3g:
# rpm -Uvh ntfs-3g-200944-el5i686.rpm
Then you should be able to mount the ntfs filesystem:
# mkdir /ntfs
# echo "/dev/sda3 /ntfs ntfs-3g defaults 0 0" >> /etc/fstab
# mount -a
Note however, that this probably is not supported.
So mounting the drive on a windows computer and copying the files via. pscp might probably be the easier and supported way...
Regards
Sebastian

Does Oracle BPM Suite has an inbuild process for Work Flow Mgmt ?

HI,
There is an workflow tool in the market known as STAFFWARE. IS oracle BPM Suite has this capability of workflow mgmt. So, is the BPM suite able to replace the Staffware S/W ?

Hi Dhawal,
If you are refereing to actual implementation of a modelled workflow or process, the short answer is yes. See for example [http://www.oracle.com/technologies/soa/oracle-bpa-suite-datasheet.pdf].
Best,
Mathias

Adding ldap support for postfix

using darwinbuild
I have read several discussion:
http://discussions.apple.com/thread.jspa?messageID=1240972
http://discussions.apple.com/thread.jspa?messageID=658174&#658174
in reading these i noted that I have to create the directory
/Appleinternal/Developer/Headers and place the appropriate headers in there.
This is where I'm stuck looking for the right headers for LDAP.
smtp1:/usr/include root# ls | grep ldap
ldap.h
ldap_cdefs.h
ldap_features.h
ldap_schema.h
ldap_utf8.h
Are these the header files i need to place in the Developers/ldap directory?
What All needs to be in here?
here is the build from the postfix makefile
build :
echo "ENV = $(ENV)"
$(ENV) $(MAKE) -C $(SRCROOT)/$(PROJECT) makefiles OPT="-DBIND8COMPAT -DHAS_SSL -DUSESASLAUTH -D_APPLE_ \
-I/AppleInternal/Developer/Headers/sasl -framework DirectoryService $(CFLAGS)" \
AUXLIBS="-L/usr/lib -lssl -lsasl2.2.0.1 -lgssapi_krb5"
$(ENV) $(MAKE) -C $(SRCROOT)/$(PROJECT)
the ldap book 'O'reilly" pg. 148 to enable client support for postfix;
CCARGS="-I/usr/include -DHAS_LDAP" \
AUXLIBS ="-L/usr/local/lib -lldap -llber "
i get the same info from http://www.postfix.org/LDAP_README.html
i do not see lldap and llber in /usr/lib anwhere. do these files get created in the build or do I have to find them? are these the current options?
TIA
-j

1. Make sure you do not forget the sasl headers.
okay, sasl in addtion to ldap information.
2. Did you recompile LDAP, or just use the one that
was there on your Tiger default install?
No i did not recompile ldap. Although the thought did cross my mind when i saw that my ldap version was 2.2.19
If you did
re-compile, make sure you used the one from darwin
sources.
Darwin source is 2.2.19
Current version on OpenLDAP site is 2.3.20

CUCM and Unity LDAP Support for Server 2008 R2

I am planning on upgrading our Primary DC from Server 2003 Standard to Server 2008 R2. We current have 2 CUCM's version 7.1.5.31900-3 and 1 Cisco Unity version 7.0 (2). Both reference LDAP and/or GC. I need to know will everything break once I demote the 2003 DC. I already have one 2008 R2 domain controller in place. Also is the 2008 R2 domain functional level supported?

Hi,
The directory hierachy for a backup taken using windows server backup will be something like this:
\WindowsImageBackup\<ServerName>\<Backup datetime>\<guid name>.vhd file along with some xml config files.
The directory heirachy above suggests the backup was not taken using Windows Server Backup, at least directly, if it is taken using some software scripted over windows server backup, the .chm file may belong to that software.
The .vhd file created by windows server backup is not mountable in readonly mode, it is mountable in readwrite mode only.
Thanks,
Abhinav
This posting is provided "AS IS" with no warranties, and confers no rights

Oracle Weblogic 9.2.3 server support for SAML 1.1 'wildcard attributes'

To support Web SSO using SAML on Oracle Weblogic 9.2.3 server - I need to parse SAML 1.1 'wildcard attributes' in the SAML 1.1 Asserter schema; https://www.oasis-open.org/committees/download.php/3408/oasis-sstc-saml-schema-assertion-1.1.xsd. The Oracle Weblogic 9.2.3 server provides an interface; weblogic.security.providers.saml.SAMLIdentityAssertionNameMapper - for parsing the information in the SAML token provided by an external partner, but this interface only deals with nameid and groups and not attributes in the AttributeStatement of the SAML token. In weblogic 10 a new interface; com.bea.security.saml2.providers.SAML2IdentityAsserterAttributeMapper - is provided, which solves this problem.
My question is, how can I get access to the attributes in the AttributeStatement in the SAML 1.1 token on an Oracle Weblogic 9.2.3 server ?
Or
Is the weblogic.security.providers.saml.SAMLIdentityAssertionAttributeMapper available in weblogic 9.2.3 ?

To support Web SSO using SAML on Oracle Weblogic 9.2.3 server - I need to parse SAML 1.1 'wildcard attributes' in the SAML 1.1 Asserter schema; https://www.oasis-open.org/committees/download.php/3408/oasis-sstc-saml-schema-assertion-1.1.xsd. The Oracle Weblogic 9.2.3 server provides an interface; weblogic.security.providers.saml.SAMLIdentityAssertionNameMapper - for parsing the information in the SAML token provided by an external partner, but this interface only deals with nameid and groups and not attributes in the AttributeStatement of the SAML token. In weblogic 10 a new interface; com.bea.security.saml2.providers.SAML2IdentityAsserterAttributeMapper - is provided, which solves this problem.
My question is, how can I get access to the attributes in the AttributeStatement in the SAML 1.1 token on an Oracle Weblogic 9.2.3 server ?
Or
Is the weblogic.security.providers.saml.SAMLIdentityAssertionAttributeMapper available in weblogic 9.2.3 ?

Is Hybrid Connection supported for API APP?

If one is building a custom connector using API app, most likely, one would have the need to access on premise resources, web services or SQL. Hybrid connection seems like the perfect fit here to enable for API app.
Since it's available on Azure Website and AMS, it is currently also available on web app and mobile app, why not enable it for API app?

Hybrid connection is supported on API App since API App is hosted on Web App directly. You can navigate to the hosting Web App from Azure Portal by clicking
API App blade -> Essentials part -> API App Host

MS Windows 2000 Support for IDM Password Sync Connector

Hi all,
We have a Domain Controller running on MS Win 2000 and there is no way we can upgrade it right now.
I checked the PWD Sync Connector Doc and it says that it supports only MS Win 2003 and MS Win 2008.
We have to install the Listener on this DC. Is there any alternative or do you think it will work even though it is not supported?
Thanks,
M

You do know that MS will hit you with a 10 000 USD per domain controller maintenance fee if you stay on AD 2000 after July 2010?
I have seen the IDM password synch work on AD 2000 but that was in older versions of the connector as well as OIM. Should work but may have issues.
Best regards
/Martin

Supporting PAPI in Oracle BPM 11g ?

Hi All,
For Oracle BPM 11g , Is "PAPI" still support for Oracle BPM 11g ?
Furthermore, Is there any Hand-on Tutorials for Oracle BPM 11g ?
Many Thanks in Advance...
Pearapon S.

I think with 11g, the starting point for dealing with a Process* should be the Composite [http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e10659/oracle/soa/management/facade/Composite.html] .
From Composite::getComponents() you should be able to get handle(s) to the process(es) deployed in the composite.
*IMHO, in most common usecases you really need to just interact with the human workflow services referred to earlier in this thread.

What is the difference btw Oracle bpm 10gr3 vs albpm 6.0.5 version

What is the difference btw Oracle bpm 10gr3 vs albpm 6.0.5 version
Are the build number common to them?

Projects built in ALBPM 6.0 can be used directly in Oracle BPM 10g, but the reverse is not true.
It's sometimes thought that Oracle BPM 10g was just a relabeling of the predecessor BEA product ALBPM. This is not the case.
In Studio, standards are better supported:
<li> By default, new processes now use horizontal swim-lanes. You can change the swim-lanes orientation individually for each process. You can define the default orientation for each project and for your Studio installation.
<li> It uses more sophisticated BPMN icons. BPMN is the new default process diagram theme. BPMN constructs now include Gateways (AND, OR (new in 10g), XOR, Multiple Instance (previously Split-N)). A new Timer event was added. Loop conditions for automatic activities and groups were added.
<li> Studio now supports Mac/OS 10.4 Tiger and Mac/OS 10.5 Leopard.
<li> Studio now supports Windows Vista.
<li> Studio now supports CVS and Subversion version control systems.
<li> The Studio UI incorporates Eclipse 3.3 improvements such as the following:
<li> New Minimize/Maximize behavior: When minizing view stacks in Studio, the view icons are placed on the nearest trim area. If a view is maximized, all other views are minimized, rather than hidden.
<li> Interactive tasks provide a new "previewable" property. The new Application Display Panel and Task Execution Panel of WorkSpace automatically start the execution of previewable tasks without locking the process instance. Enabled by default for Dashboards.
<li> New type of Activity: Time Activity. A process instance that arrives to this activity just sits idle until a timed event occurs.
<li> Option Process Notification Immediately on Termination Wait activities has been deprecated. Now both the Wait activity and the first activity in the interruption flow always execute in the same transaction.
<li> Although I'm not wild about it, there is an auto-layout feature re-arranges all visual elements of a process diagram automatically, minimizing superpositions and aligning the flow as much as possible. Only available for processes with horizontal lane orientation.
<li> New process property (Greedy Execution Mode) indicates the Process Execution Engine to collapse contiguous automatic tasks in a single transaction. This mode of execution provides better performance for some processes. Disabled by default.
<li> A new Process-Level debugger allows developers to introduce breakpoints and debug complete processes running in Studio. When the execution reaches a breakpoint, the Engine pauses and Studio's debugging view appears. You can inspect variables, add new breakpoints, resume and continue execution.
User Interface
<li> The Business Analyst and Business Architect profiles provide a simpler set of menu options and toolbars.
<li> New editor for BPM Object Presentations. It's easier to use, provides a WYSIWYG drag and drop interface, improved CSS support and a new Drag & Drop toolbar.
<li> You can now interrupt a running Simulation started with the Run to the End button.
<li> New BETWEEN operator added to Business Rules editor (on both Studio and WorkSpace). This operator works with Time and numeric types.
<li> The Documentation View now displays read-only documentation for the standard Fuego.* components.
<li> New on-line help book Oracle BPM Components Reference provides reference documentation for the standard Fuego.* components. Only available for the developer profile.
<li> This version introduces Project Dependency, which allows you to re-use components and role definitions from a common base project.
In the WorkSpace:
<li> WorkSpace has an edit mode which allows users to change and save the configuration and layout of panels.
<li> A new tabbed interface allows you to define multiple pages, each with its own set of panels. You can export the layout configuration to an XML file and re-import it on a different environment or as a different user. Administrators can define layouts for all users in a certain Role.
<li> You can export the data in the Worklist panel to a PDF or CSV
<li> You can see an OOTB chart representation of the distribution of items in the Worklist panel.
<li> WorkSpace includes the following new panels: Task Panel: Renders the execution of interactive tasks within the panel, instead of using the default modal dialogs. Dashboard Display Panel: Provides a way to display Dashboards within a Panel. View Chart Panel: Provides predefined graphical reports about process performance, work items distributions and workload. Application Panel: This panel contains an application (the execution of a Global Interactive). Applications can respond to work item selections or run independently.
<li> The user can now do re-assignment operations on multiple instances at once.
<li> The Business Rules editor shows additional auditing information, including who and when a rule was modified.
<li> WorkSpace now (optionally) stores session-specific information as client-side cookies. This allows load-balancing on a cluster environment without affecting the user experience.
Integration:
<li> New timeout property added to external resources of type HTTP Server. Use this setting to control timeouts on web service invocations.
<li> Authentication information added to external resources of type JMS (Java Messaging System)
<li> Processes exposed as Web Services can now provide a runProcess operation, which synchronously executes the complete process (from begin to end). Only meaningful on fully automated processes.
Enterprise:
<li> New Ant tasks to rebuild the Oracle BPM web applications for container-security.
<li> Configuration Wizard adds option Generic JNDI to the list of available LDAP servers. When using this option, you must provide a custom configuration file defining the mapping of object classes, attributes and filters. This new feature is also the new mechanism for integrating with AquaLogic Interaction 6.5, replacing the old Identity Service.
<li> Configuration Wizard can now be run without user interaction ("silent mode"). You specify all configuration values in an XML file.
<li> Oracle BPM client applications (including WorkSpace, PAPI-WS and custom PAPI apps) are now able to connect to multiple environments (BPM Directories) simultaneously.
<li> Added Sybase as a new provider for the Engine database and BPM Directory database.
<li> More information added for auditing of Business Rules, including who and when a rule was modified.
<li> Updated bundled JDBC drivers to their latest version.
<li> The Engine now logs warning messages when it detects rogue threads. A new preference allows the administrator to disable automatic re-starts when the Maximum Number of Rogue Component Executions is reached. In addition, in the case of an automatic re-start the Engine now logs a complete thread dump.
<li> Simplified procedures for deploying BPM WorkSpace on WebLogic Portal. BPM Process Administrator now generates the WorkSpace EAR file as a WLP library module.
<li> Authentication information added to external resources of type JMS (Java Messaging System).
Dan

Support for Array Binding and PL/SQL tables (IN, INOUT, or OUT)

I have attempted, unsuccessfully, to use array binding in stored procedure/function calls where the sp/sf has parameters that are PL/SQL tables. I have seen the topic floating around in this forum, but I have not seen the explicit questions:
- Does ODP.NET support PL/SQL tables as IN, INOUT or OUT parameters to stored procedures/functions?
- Will any planned ODP.NET release support PL/SQL tables as IN, INOUT or OUT parameters to stored procedures/functions?
I am aware that I can use REF CURSORS to handle the OUT situation, but I need to make a design decision concerning supporting parameters of IN and INOUT PL/SQL tables.
Thanks.
James

You really MUST do this!! - i.e. include support for PL/SQL table parameters (IN INOUT and OUT) in a future release of ODP.NET.
PL/SQL tables are a fundamental type in Oracle stored procedures and you will be preventing a huge number of existing projects from migrating to .NET if you don't acknowledge them as part and parcel of Oracle programming.
I sincerely hope support for PL/SQL table parameters is treated as a serious issue.
Think what a coup it would be for you over Microsoft (who don't currently support PL/SQL tables with their .NET native provider for Oracle and don't look as if they will at least in the short term)!
Please, please, please!

PLEASE HELP!! ORACLE/ORANT/FORMS

HELLO I AM FROM ATHENS GREECE
I HAVE NO IDEA FROM ORACLE AND FORMS BUT I MUST SAVE AND OPEN FILES FROM A CRASHET PC FROM A CUSTOMER.
WITH NTFS FILES BACKUP I HAVE SAVE THIS FILES ON C:
oracle:
admin
ora92db
oradata
orant
and ROTA:
AKINITA.fmx
FISPROS3.fmx
NOMPROS.fmx
nompros.RDF
andmany others with .fmx .rdf .rep .plx .olb
i found shotcuts in desktop with the name
ΑΝΤΡΩΝ E -9 - 03 (properties C:\orant\BIN\ifrun60.EXE module=AKINITA.fmx userid=rota3/rota3 and start from C:\rota)
ΦΙΣΙΚΑ 003(C:\oracle\orant\BIN\ifrun60.EXE module=FISPROS3 userid=rota3/rota3 start from C:\rota)and many others.
i have downloaded oracle 11g and forms 6i but i dont now what i must do to open this files.
PLEASE HELP ME BECAUSE THEY ARE VERY IMPORTANT FILES FROM MY CUSTOMER
THANKS JIM

Hi!
Sorry, but if you don't know oracle and forms this is a job for someone else.
It seems there is a shared oracle home with a 9i database and oracle Forms 6i.
Orant is the forms home.
Ora92 db is the database software,
oradata the database files and
admin holds the database parameter files.
Without good knowing it will be hard to get the data back.
Regards
Stauder

What browser can Run oracle 11g forms (R2)

salam to all oracle Developer...
dear i want to use oracle 11g forms ,,
so what browser support to run oracle 11g forms ??
plz solve my problemm
[email protected]
or
http://www.facebook.com/profile.php?id=100001621174089

http://docs.oracle.com/cd/B28359_01/install.111/b32002/pre_install.htm#CHDGHJAC
http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html

IDE Support for Oracles Forms and Reports

Hi All,
I am beginning a software integration project and would really appreciate it if you could give me some guidance. I wish to find an IDE that will support Oracle Forms & Reports (6i and 9i/10g) development (in particular support for coding of .rdf and .fmb files) either natively or via a plug-in. Is anyone aware of such an IDE or plug-in? Thanks in advance.
-S

Thanks for your input Jacob, that answered my question. I was wanting to know if there was any IDE that could be used to develop fmb's or rdf's, either natively or with a plug-in. From your response, I now know there are not.

Will REF CURSOR support for Oracle Forms 6i?

Hi,
I need to use ref cursor in my from. My cursor query should be dynamically append the "where clause". Hence I used the dynamic query with ref cursor.
But my problem is , when I compile the form it gives error for the line " OPEN emp_record FOR l_query;"
You need to use "select" statement.
Is there any solution for this in forms?
I know it supports for other PL/SQL areas.
Please help me. below is my code sample,
DECLARE
TYPE emp_refcur IS REF CURSOR;
emp_record    emp_refcur;
TYPE rec_emp_data IS RECORD
    emp_no              VARCHAR2(40),
emp_rec             rec_emp_data;
l_query               VARCHAR2(4000);
BEGIN
     l_query := 'SELECT empno
                 FROM emp ';
      IF :CONTROL.ename IS NOT NULL THEN
          l_query := l_query||' AND ename = '''||:CONTROL.ename||''' ';
      END IF;
     OPEN emp_record FOR l_query;
     LOOP
        FETCH emp_record INTO emp_rec;
        EXIT WHEN emp_record%NOTFOUND;
       dbms_output.put_line(emp_rec.emp_no);
    END LOOP;
    CLOSE emp_record;
END;      Thanks
Rajesh

Hi,
It's been a while since I used Forms 6i, but I remember hitting a similar problem. I don't think (and stress think!) that the PLSQL engine that comes with Forms 6i recognises ref_cursors.
The work-around I used was to move the functionality to the database and call it from forms.
Hope this helps.
Regards
Ian

Oracle BPM (former ALBPPM) Hybrid LDAP Support for IDM

Similar Messages

Maybe you are looking for