Oracle data file not accessible

Dear All,
I hitting the following error while trying using dbv command:
kuldb84s:oraq00 50> dbv FILE=p00.data483
DBVERIFY: Release 10.2.0.4.0 - Production on Mon Nov 22 14:53:12 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
DBV-00100: Specified FILE (p00.data483) not accessible
kuldb84s:oraq00 51>
I hitting the same thing with BRTOOLS as well.
Do you know what is the error message above meant ?
Best Regards,
Ken

Dear Gagan,
        I would not go for restarting the DB before finding out the root cause. I meant, the reason for restarting DB ?
Dear Tom,
        I have tried with the full path, but the result is the same.
        Regarding to the dbv help,
        1. The data file is exists.
        2. The data file is not end with .dbf
             I tried the same command in other system, the particular data file able to be verified.
        3. How do we justify whether the data files are being locked or not ?
Bes Regards,
Ken

Similar Messages

About defrag of oracle data files(*.dbf)

When I use windows defragment tool or o&o defrag server defraging drive C on which I put oracel data files(*.dbf),the two tools prompt oracle data files can not be defraged.And I neither can defrag oracle data files with the two tools afer disable all oracle services and reboot the server.Please tell me why?The second question is : First, I shutdown oracle and move oracle database to drive D.Second,I defrag drive C with spatial mode(full defrag),and move back oracle data files.Please tell me if this is right?The third question is :I disable all oracle services and reboot the server.Can this completely shutdown oracle?And what is the better way?
Thanks for your answer and help very much!!

1. I never seen problem with defrag when the database is down.
By the way, put the dbf files on the drive C: doesn't seems a very good idea... at least I wouldn't advise that. It's better to separate the OS host drive and the application data.
2. It seems odd workaround.
3. If you set the service as automatic start, reboot the server doesn't help to shut the database down. It will restart after the server reboot. If it's your own computer to host a training database, I would set the service as Manual start.
Nicolas.

Oracle Data Source not showing proposal fields

Hi, I need to create a DB Connect - Oracle Data Source. I go to the table / view matchcode, and I find the view we created for this data source, and in Proposal it doesn't bring any fields. I press the refresh button, and nothing happens.
Any idea what this could be??
Tanks in Advance
Manuel.-

HI
Change the data in the Flat file for Date field in the format YYYYMMDD. Then try viewing the Preview.
If it still shows error message like your system format does not match, Check the System date format, you can check in SU01-->defaults tab, change the data in the flat file with your system format and check.
Hope this helps,
Aparna Duvvuri

Oracle date field not comparing properly with to_date function

Hi, i'm facing a very weird problem. I'm triyng to retrieve a range of records in between two dates. However, it doesn't seem to understand. What am i doing wrong?
let's say my table (MYRECORD) has this (where id is varchar and date is DATE and not timestamp) :
ID DATE
1 22-JAN-08
2 22-JAN-08
3 21-JAN-10
4 11-FEB-10
5 11-FEB-10
So, let's say iwanna get the records from 21st Jan 2010 :
select
date as ori_date from MYRECORD where
date = to_date('21/01/2010','DD/MM/YYYY')
1.)
it is not returning any record at all. I'm having problems with between dates and the to_date function as well,
so i'm trying to get the 'equal' part working first. I can't use to_char because at the end of the day,
i need to compare between dates.
what am i doing wrong? has this got anything to do with what kind of format is set up on the oracle server?
running :
SELECT value FROM v$nls_parameters WHERE parameter ='NLS_DATE_FORMAT'
returns DD-MON-RR
2.) how do we compare dates from the table according to our own specified format from our passed string? I only have READONLY access to this database
so i can't set anything up.

please run this
select To_date(date, 'DD/MM/YYYY HH24:MI:SS') as ori_date from MYRECORDprobably you have hour minute second info in your table, to_date('01012010','DDMMYYYY') means hour, minute and second is 00:00:00 so it wont be equal.The database field type is actually 'DATE' and not datetime. I've also ran the sql you provided to show its timestamp, but it's not showing anything as far as timestamp is concerned. It's showing only the date. So does this mean it's a real date only information?
However, it might be more efficient to do two comparisons, especially if there's an index on dt:
WHERE dt >= TO_DATE ('21/01/2010', 'DD/MM/YYYY')
AND dt < TO_DATE ('22/01/2010', 'DD/MM/YYYY')
Ok. If we change the range to compare it on the same day, it won't work;
WHERE dt >= TO_DATE ('21/01/2010', 'DD/MM/YYYY')
AND dt <= TO_DATE ('21/01/2010', 'DD/MM/YYYY')this also happens if we're using BETWEEN
this is real weird. It's supposed to work...i don't recall having this kind of issue on other databases. If that's the case,
each time a user passes me a date string i have to somehow add another day onto its 'to' comparison date in order for things to work.
but..i don't want to since i don't want to accidentally include the extra day's results!
Edited by: 803998 on Oct 21, 2010 8:14 PM
Edited by: 803998 on Oct 21, 2010 8:33 PM

WSA Webroot Malware Category DAT files Not Updating

I have two wsa's that have not updated their webroot dat files since may 16th. I have tried a manual update and it still has not updated. I am not sure if any new updates have been released and availalbe. Is there a way I can verify what the most recent dat files are??

Did you ever resolve this issue. I have the webroot failing to update aswell. Will log a TAC case, but checking to see if you have had any progress?
Ben

Oracle data provider not appearing in MS Business Intelligence reporting

Oracle Data provider does appear is VS 2005 server explorer but NOT as a data source in the reporting project type.
This is in oracle ODAC beta 11
Is this supported?

I believe your developer encounters a hang when using the Microsoft reports wizard with MS OracleClient. I don't know why this is happening, but this issue would need to be resolved by Microsoft. They build both the reports wizard and MS OracleClient. They would need to identify what in their code is causing the problem. If they find out the underlying cause is a call they are making into Oracle, then Oracle will fix it.
Oracle builds ODP.NET, which I haven't seen work with the reports wizard query builder. But I haven't fully investigated why. There may be additional configuration needed to wire these together.
If you would like to discuss this in detail, you can email me at alex.keh [at] oracle.com

Tp import fails with error "data files not transferred"

Hi colleagues,
I am working on transport requests. I had issued out the tp addtobuffer SIDKxxxx <sid> pf=TP_DOMAIN_SID.PFL command for a number of transport requests at OS level; but when i then try to do tp import SIDKxxxxx <sid> client= u18 pf=TP_DOMAIN_sid.PFL, i get this error: "Data files are not transfered" in the QAS system. Everything works fine in PROD though. What could be the reason for this. I can't get it done within the application either.
Your responses appreciated.

Hi,
I guess you have individual transport directories. I f you have configured the Transport Domain and added the Other Two into the Domain and configured the Transport Route. You should be able to see the Some RFC Destinations in SM59.
TMSADM@<SID>.<DOMAIN NAME>
TMSSUP@<SID>.<DOMAIN NAME>
Please check the Test connection. of all these RFC Destination. If these fail check if you have firewall issues between the system stopping the communication on Port 33<Instance No>.
Thanks,
Tanuj

Essbase cube empty vs Essbase data file not empty. It is possible?

Hi Guys,
This morning end-users has alerted that our planning cube has no data. I have verified that the export file was completely empty despite that Essbase data file (ess00001.pag) is about 3 MB. How does it is possible? I am trying to recover the proper situation using backups buit I don't know how to identify when database was cleaned (end users dind't acces to essbase since 2 weeks ago).
Thanks

Could the level 0 data have been zeroed out, and no agg run to propagate the zeros (or #Missing) to upper levels?
Did you at one time have some data in the database, then lock n send to overwrite?
If you had performed a database reset, that would leave no page file. If you simply overwrote data, then you could have some fragmentation (when data is overwritten, the data is written to a new space in the page file with the index pointing to new data. This leaves the prior data behind with no index pointer to it, but it's still in the page file.)
Was the export file of all data, or level zero data?
If it was level 0 export, perform an export all (3mb is not that much) to verify if there is any data. If not, I'd chalk it up to fragmentation.
Robert

OFFICEJET 8500 FAX LOG DATA FILES NOT FOUND; ARE THEY ON COMPUTER AND WHAT IS THE FAX DATA FILE EXT

4:32 PM PST FRIDAY MAY 13, 2011
TODAY I WAS TALKING WITH PAUL IN INDIA AT HP SUPPORT ABOUT THE FACT I HAD JUST SENT A FAX TO A DOCTOR. TWENTY MINUTES LATER THE DATA FILE ASSOCIATED WITH THIS FAX WAS NOT AVAILABLE. QUESTION IS, WHAT IS THE FAX FILE EXTENSION NAME *.???.....AND IS THE FILE ON THE COMPUTER WHERE I AM SENDING MY FAXES FROM. ALSO I RECEIVED A HP UPDATE TO THE OFFICEJET 8500 THURSDAY MAY 12 AT PM PST. I NOTICED AFTER THIS UPDATE I NO LONGER HAVE MY DATA FILES WITH MY FAXES SENT. WHAT HAPPENED??

'''places.sqlite''' is the name of the file that Firefox stores bookmarks and browsing history in.
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

Files not accessible

when I go to my pictures through file explorer I get a mwssage that state files not aacessible access denied >file exp./ documents/my pictures.
However I can get to them on one drive as well as the picture app on the app screen. These pictures came from a flash drive. Do I need to reload them or can I pull them from one drive? I would like to access them from file explorer. They are obviously in the computer.
This question was solved.
View Solution.

thank you

Cofiles and data files not generated

hi
we have upgraded from R/3 46c to ECC 6.0 on HP-UX Oracle 10 platform.
this is our quality system and the devlopment system still remains connected to the production seperately.
After upgrade the transport requets created do not have cofiles and datafiles generated in usr/sap/trans.
As a part of postprocessing I have selected the upgraded system and updated configuration in STMS/system.But the release is still shown as 620.
I need expert advice on this can anybody guide please

Hi Gopalakrishnan,
after system upgrade, as part of postupgrade activity we have to refresh the STMS configuration. so, try deleting the setting in STMS from "000" client in the system, and re-configure the same by specifying the new transport domain.
and unlock & referesh the transport queue. if you are still unable find the TR then try to copy them from Development system manually. [check whtr those TR are saved as Local Change request, if so, you can't find the data & co-files of the same].
with regards,
Rajesh.
 plz, award suitable points

Reducing oracle data file sizes to a bare minimum

Hi,
How can I create an oracle instances with minimal file sizes ?
Using the database configuration wiz, i've specified 10~20mb sizes for SYSTEM01, UNDOTBS01 etc. but when the instance is created the files were still huge :
SYSAUX01 was 83MB,
SYSTEM01 was 256MB
UNDOTBS01 was 158MB
The only files that seems to have complied were the redo log files.
It's a testing environment that's constantly restored so i'm trying to fit the files into a ram-disk (using imdisk) in favour of performance.
The data required/created by each test is not large and because it's only a testing db reliability/consistency is not an issue - rollbacks are also minimal (i've set the retention at 15 secs so far)
So if anyone can shed some light on how to keep filesizes to a minimal, I'm all ears.
If there's a way to run without some of these files, i'm keen to hear too =)
Thanks

So if anyone can shed some light on how to keep filesizes to a minimal, I'm all ears.
SQL below works.
reduce SIZE value & see what works for yourself
spool V888.log
set term on echo on
startup mount;
CREATE DATABASE "V888"
    MAXLOGFILES 16
    MAXLOGMEMBERS 3
    MAXDATAFILES 100
    MAXINSTANCES 8
    MAXLOGHISTORY 292
LOGFILE
GROUP 1 '/u01/app/oracle/product/10.2.0/oradata/V888/redo01.log' SIZE 50M,
GROUP 2 '/u01/app/oracle/product/10.2.0/oradata/V888/redo02.log' SIZE 50M,
GROUP 3 '/u01/app/oracle/product/10.2.0/oradata/V888/redo03.log' SIZE 50M
EXTENT MANAGEMENT LOCAL
SYSAUX DATAFILE '/u01/app/oracle/product/10.2.0/oradata/V888/aux88801.dbf'
     SIZE 20971520 REUSE AUTOEXTEND ON NEXT 655360 MAXSIZE 32767M
DEFAULT TABLESPACE USERS DATAFILE
'/u01/app/oracle/product/10.2.0/oradata/V888/system01.dbf'
     SIZE 20971520 REUSE AUTOEXTEND ON NEXT 655360 MAXSIZE 32767M
DEFAULT TEMPORARY TABLESPACE TEMP888 TEMPFILE '/u01/app/oracle/product/10.2.0/or
adata/V888/temp88801.dbf'
     SIZE 20971520 REUSE AUTOEXTEND ON NEXT 655360 MAXSIZE 32767M
UNDO TABLESPACE UNDO888 DATAFILE
'/u01/app/oracle/product/10.2.0/oradata/V888/undo88801.dbf'
     SIZE 20971520 REUSE AUTOEXTEND ON NEXT 655360 MAXSIZE 32767M
CHARACTER SET AL32UTF8
NATIONAL CHARACTER SET AL16UTF16
spool offBut WHY are you doing so?

Files not accessible from local view

Hello,
I recently got a new computer (iMac 11,3) and transferred all files from a backup drive. Since then, the local view in Dreamweaver's file panel does not display the files in my local root folder. The files are visible and accessible from the desktop. I can open them in Dreamweaver by dragging them onto the Dreamweaver icon, but I can't put them to the remote server (get and put commands are grayed out). I've edited the site settings, and defined a new site with a new local root folder, but still have the same problem. I'm using DW cs3. The old computer was an iMac G5, with a non-Intel processor. I hope that's not the problem.
Thanks!

Local:
Site name: Neal homepage
local root folder: Sesostris:Users:nskorpen:Documents:Neal homepage:
Default image folder: (blank)
Links relative to : Document
HTTP address: http://www.nealskorpen.com/
case sensitive links: off
cache: disabled
Remote:
Access: FTP
FTP host: www.nealskorpen.com
Host directory: /public_html/
login and password: I'm not going to list these here. I tested the
connection and they worked.
Use passive FTP: disabled
Use IPv6 transfer mode: disabled
use firewall: disabled
use SFTP: disabled
Maintain synchronization information: enabled
Automatically upload files to server on save: disabled
check in/out: disabled

Oracle Report Server Not Accessible

Hi Folks,
I'm facing a series of issues with Oracle reports server 11g. I'l list the issues one by one.
1. I'm not able to start the weblogic server from the domain which i've created for Reports. It gives me authentication error. I've tried clearing tmp directory, clearing temp directory and creating a boot.properties in the security folder. But nothin seems to work.
2. I'm not able to start the report server from the instance path C:\Oracle\Middleware\asinst_1\bin\opmnctl.bat. The contents of opmnctl.bat is as follows
@ECHO OFF
SETLOCAL
set PERL5LIB=
set JAVA_HOME=C:\Oracle\Middleware\jdk160_29\bin
set ORACLE_HOME=C:\Oracle\Middleware\Oracle_FRHome1
set ORACLE_INSTANCE=C:\Oracle\Middleware\asinst_1
set OpmnService=OracleProcessManager_asinst_1
"C:\Oracle\Middleware\Oracle_FRHome1\opmn\bin\opmnctl.bat" %*
when i run this from cmd i get all the components as alive but i'm not able to access the reports path with the url. (http://domainname:7003/console or /em).
this says connection refused.
3. When i try to access the url http://domainname:8888/reports/rwservlet gives me apache bridge error. I've been trying all the things given in google for the past 1 week but still its not working.
This is my Oracle Forms and Repots Installation log:
Middleware Home Location: C:\Oracle\Middleware
 Oracle Home Location: C:\Oracle\Middleware\Oracle_FRHome1
 Oracle Instance Location: C:\Oracle\Middleware\asinst_1
 Oracle Instance: asinst_1
 Domain Option: Create Domain
 Domain Name: Sapphire
 Domain Home: C:\Oracle\Middleware\user_projects\domains\Sapphire
 Domain Host Name: PC201845.cts.com
 Domain Port No: 7001
 User Name: weblogic
 Automatic Port Detection: true
 Administrator Console: http://PC201845.cts.com:7001/console
 EM Console: http://PC201845.cts.com:7001/em
 EMAgent URL: http://PC201845.cts.com:5155/emd/main
 Forms URL: http://PC201845.cts.com:8888/forms/frmservlet
 Reports URL: http://PC201845.cts.com:8888/reports/rwservlet
I'm not able to login to any of this url.
pls help with the issue.
P.S - I'm able to start weblogic server from base_domain but not from Sapphire domain which i created during installation of reports 11g.
I need a way to start the Weblogic server from Sapphire Domain and also start reports server and access the reports url.

TemTesh wrote:
After machine shutdown without shutdown IAS server, Oracle application server report service can not restart.
below is the error
11/2/10 5:26 AM NfsServer: (TCP:Nfs-6) Exception
oracle.ifs.common.IfsException: IFS-71002: I/O error.
java.net.SocketException: Connection resetAnd this seems to be the problem. Missing NFS share? TCP=transmission control protocol. NFS=network file server.
For some reason (very like due to how it has been configured), the s/w attempts to use a NFS share - and uses the TCP wire protocol. This NFS share is not mounted or not available.
Check the NFS server (it needs to be up and exporting that share), there has to be network connectivity between the report server and the NFS server, and the report server needs to have the required config and access permissions for mounting that NFS share.

Why are all transferred files not accessible?

I am linked to my iMac yet whenever I transfer files over I cannot open or change them without having to put in my administrator code. Why is that? I have put in my administrator name on this computer with the ability to read and write. I don't see why that is not recognized. Anyone else having this issue?
Thanks,
Richard

Whatever the truth of all this may be, you won't find it here. This is a user to user forum, not Oracle support or a channel to the developers. All you will get here at best is valid post hoc reasoning: at worst, guesswork. And if you're trying to bring this issue to Oracle's attention, again this isn't the place to do it. Locking the thread.

Oracle data file not accessible

Similar Messages

Maybe you are looking for