Oracle Error Ora-27069 when inserting bulk data

Hi,
I'm inserting 10.5 million rows in a table using insert statement, & system is giving below error:
Code -1114, Description - ORA-01114: IO error writing block to file 201 (block # 74633)
ORA-27069: skgfdisp: attempt to do I/O beyond the range of the file
OSD-04026: Invalid parameter passed. (OS 74639)
ORA-01114: IO error writing block to file 201 (block # 74633)
ORA-27069: skgfdisp: attempt to do I/O beyond the range of the file
OSD-04026: Invalid parameter passed. (OS 74639)
Please suggest the action for this error
Thanks
Deepak

...I apologize but of course setting the size to 3.8GB max is a "non-sense". The major thing is not to hit the 4GB size from a tablespace in Autoextend. So setting the initial size of the datafile to a value superior to 4GB is enough then you can be in Autoextend.
Then you'll eventually hit the maximum size in number of blocks for a datafile but this is easily solved by adding a new datafile.
Regards,
Guillaume.

Similar Messages

Oracle error ORA-604 when opening a connection

I am facing an issue with my WCF service which is using ODP.NET version 4.112.2.0(x64) and Oracle 11g.
The service runs without any problems on the test servers but on production server (Windows 2008 R2) when an attempt is made to call any service method it fails with the following Oracle error code Ora-604. the message is
ORA-604: error occurred at recursive SQL level %s
The exception is thrown when a call to meethod Open is made to open a connection.
There is no inner exception. So far I have tried checking the connection string, the user permissions and setting the TNS_ADMIN environment variable but nothing has worked.
Another thing to mention is that another WCF service which uses some of the same stored procedure I am using is working fine on the same server.
Has anyone seen this before?
Thanks,
A

Do you have a login trigger?
select * from dba_triggers where triggering_event like 'LOGON%'
If so, try disabling it.
Does the working service use the same credentials as this problem service?
Are you able to connect using sqlplus, with the same credentials from the same client to the same database? If it's not an ODP.NET specific problem, the dba guys might be able to help better: General Database Discussions
Greg

Oracle error ORA-00600 when using Oracle 10g and Sun One Web Server 6.1

I have a java application that was running under Solaris 8 and Oracle 9i. I am trying to get it up and running on a new server that is configured with Solaris 9 and Oracle 10g. Whenever the application tries to connect to the database it receives the following error: ORA-00600 [ttcgcshnd-1][0]. My research indicates that this is an internal Oracle error that represents a low level unexpected condition. I have looked through my configuration for the Web Server and I have not been able to determine the cause of this problem. My DBA tells me that we have the latest patch installed for Oracle! Has anyone encountered this problem before? Any help would be greatly appreciated!

If the problem is also present in a SWING app, i.e. outside the web server, then it is porbably something external to the webserver.
I think you should ensure that the driver and database are compatible with each other. It is very likely that you need a new jdbc driver for the new database.
download from here http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/htdocs/jdbc101020.html
try the ojdbc14.jar

Oracle error ORA-01461when trying to insert into an ORACLE BLOB field

I am getting Oracle error ‘ORA-01461: can bind a LONG value only for insert into a LONG column' when trying to insert into an ORACLE BLOB field. The error occurs when trying to insert a large BLOB (JPG), but does not occur when inserting a small (<1K) picture BLOB.(JPG). Any ideas?
BTW, when using a SQL Server datasource using the same code.... everything works with no problems.
ORACLE version is 11.2.0.1
The ORACLE datasource is JDBC using Oracle's JDBC driver ojdbc6.jar v11.2.0.1 (I also have tried ojdbc5.jar v11.2.0.1; ojdbc5.jar v11.2.0.4; and ojdbc6.jar v11.2.0.4 with the same error result.)
Here is my code:
<cfset file_mime = Lcase(Right(postedXMLRoot.objname.XmlText, 3))>
<cfif file_mime EQ 'jpg'><cfset file_mime = 'jpeg'></cfif>
<cfset file_mime = 'data:image/' & file_mime & ';base64,'>
<cfset image64 = ImageReadBase64("#file_mime##postedXMLRoot.objbase64.XmlText#")>
<cfset ramfile = "ram://" & postedXMLRoot.objname.XmlText>
<cfimage action="write" source="#image64#" destination="#ramfile#" overwrite="true">
<cffile action="readbinary" file="#ramfile#" variable="image_bin">
<cffile action="delete" file="#ramfile#">
<cfquery name="InsertImage" datasource="#datasource#">
INSERT INTO test_images
image_blob
SELECT
<cfqueryparam value="#image_bin#" cfsqltype="CF_SQL_BLOB">
FROM dual
</cfquery>

Can't you use "alter index <shema.spatial_index_name> rebuild ONLINE" ? Thanks. I could switch to "rebuild ONLINE" and see if that helps. Are there any potential adverse effects going forward, e.g. significantly longer rebuild than not using the ONLINE keyword, etc? Also wondering if spatial index operations (index type = DOMAIN) obey all the typical things you'd expect with "regular" indexes, e.g. B-TREE, etc.

Urgent-Oracle Error :: ORA-39778-

Hi
I got following Oracle Error : ORA-39778 "the parallel load option is not allowed when loading lob columns" on production. yesterday we updated database with patchset 9.2.0.7 and DST/JVM compliant.
Please reply me ASAP.
Regards,
RJ

Sry I didn't check back this afternoon.
As posted,
Here's the note from metalink doc Note:396387.1
Then e this to apply the files manually in the following way:
Download the identified patch.
Unzip the patch, and locate the 2 files timezone.dat and timezlrg.dat in the "files/oracore/zoneinfo" directory of the uncompressed patch (or from the relevant .jar file of a patchset). If there is also a readme.txt in this location then make a note of this as well.
Backup your existing files in $ORACLE_HOME/oracore/zoneinfo - THIS CAN BE VITAL, DO NOT SKIP.
Copy the 2 .dat files and possibly the readme.txt file that were found in step 2 into the $ORACLE_HOME/oracore/zoneinfo directory.
Restart the database (in case of installation on a database), or restart the client applications (in case of client install). Note that the database did not need to be down before the time zone files were applied, but it does need to be restarted afterwards.

Oracle error ORA-22905: cannot access rows from a non-nested table item

Oracle error ORA-22905: cannot access rows from a non-nested table item
Creating a report using oracle plsql code .
Getting error ;
Oracle error ORA-22905: cannot access rows from a non-nested table item
when I am trying to pass data in clause in pl sql proc
basically I have a proc which takes 2 parameters(a and b)
proc (
P_a varchar2,
p_b varchar2,
OUT SYS_REFCURSOR
culprit code which is giving me the error and on google they say cast it but I dont know how to do it in my context
--where id in (
--        SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_a) FROM dual)
--        union
--        SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_b) FROM dual)
data sample returned from this :SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_a) FROM dual)
'Abc','def',
data sample returned from this;SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_b) FROM dual)
'fgd','fth',
Any answers ?
How to pass data in clause in a better way

Why are you creating a duplicate post? I already asked you to post p_cd_common.get_table_from_string. In particular what is function return type and where it is declared. As I already mentioned, most likely function return type is declared in the package and therefore is PL/SQL type. And TABLE operator can only work with SQL types.
SY.

Runtime error ora-12703 when running utl_mail

hello,
I call a procedure through push button to use UTL_MAIL.send(..) and I got error ora-12703.
There is no error during compilation.
For your info, I manage to execute the same code on stored procedure using TOAD and I received the email sent using TOAD and telnet from my local.
For info:
Forms developer version:
Forms [32 Bit] Version 10.1.2.0.2 (Production)
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
procedure:
PROCEDURE test_email IS
BEGIN
UTL_MAIL.send (
sender => '[email protected]',
recipients => '[email protected]',
cc => '[email protected]',
bcc => '[email protected]',
subject => 'Test',
MESSAGE => 'Hello World',
mime_type => 'text; charset=us-ascii',
priority => 3
END;
Could anyone please help me on this.
Regards,
Dayang

Hi All,
I tried another function that use utl_smtp to send email.
Again I could recieve email when I execute the function in TOAD but got error ora-12703 when I ran using forms.
When I ran the form, only "debug 1st" apear, then after that it returned error ora-12703.
Function:
FUNCTION SEND_MAIL
(pIssuer IN VARCHAR2,
pReceiver IN VARCHAR2,
pSender IN VARCHAR2,
pSubject IN VARCHAR2,
pMessage IN VARCHAR2) RETURN VARCHAR2 IS
c utl_smtp.connection;
respuesta utl_smtp.reply;
pServer VARCHAR2(50) := '10.0.3.79';
CRLF CHAR(2) := CHR(13) || CHR(10);
BEGIN
message('debug 1st');
-- Abre la conexión al Server de correo
c := utl_smtp.open_connection(pServer);
message('debug2nd');
respuesta := utl_smtp.helo(c, pServer);
-- Inicia el Issuer del correo.
respuesta := utl_smtp.mail(c, pSender);
-- Inicia el Receiver
respuesta := utl_smtp.rcpt(c, pReceiver);
respuesta := utl_smtp.open_data(c);
-- Escribe la cabecera del e-mail
utl_smtp.write_data(c, 'From: ' || pIssuer || CRLF);
utl_smtp.write_data(c, 'To: ' || pReceiver || CRLF);
-- Escribe el Subject
utl_smtp.write_data(c, 'Subject: ' || pSubject || CRLF);
-- Escribe el texto del Message.
utl_smtp.write_data(c, CRLF || pMessage);
utl_smtp.write_data(c, CRLF || '.');
respuesta := utl_smtp.close_data(c);
-- Cierra la conexión
respuesta := utl_smtp.quit(c);
RETURN '0';
EXCEPTION
WHEN utl_smtp.transient_error OR utl_smtp.permanent_error THEN
utl_smtp.quit(c);
RETURN sqlerrm;
--raise_application_error(-20000,
-- 'El envío del email ha fallado devolviendo el siguiente error: ' || sqlerrm);
END;
Regards,
Dayang

Using PreparedStatement and the Oracle Error ORA-1000

Hi,
I have a question about PreparedStatement objects that is not so simple to explain for me. What I would like to know is: if I use a PreparedStatement following traditional and generic steps:
1- PreparedStatement pStmt = Connection.prepareStatement(sQuery);
2- pStmt.setXXX(i,j);
n - pStmt.setXXX(i,j);
n+1 - ResultSet rs = pStmt.executeQuery();
n+2 - while(rs.next()){ ... retrive ResultSet data ... }
n+3 - rs.close()
n+4 - back to point number 2
and at the end (as you can see in the point numbered n+4), instead of closing the PreparedStatement pStmt using the close() method, I reuse the PreparedStatement pStmt comeing back to the point numebr 2 and setting again all its parameters with new values ... then ... what heppens in the Oracle database ? Has been the cursor (so the mamory area), associated to my PreparedStatement object pStmt, duplicated or is it the same ?
I know that Java allows you to do this kind of operations with PreparedStatement, and I know that in tha Java Documentation is explained to follow this strategy to optimize the execution time because in this way the same PreparedStatement is precompiled and prepared only once. But if I do a for loop following the steps explained before, after many iterations I have the error "ORA-1000: maximum open cursors exceeded". This error is the reason of my question. Does this error means that it's mandatory to close a PreparedStatement always, otherwise if you reuse it without closing it then the corresponding database cursor will be duplicated ? If it is so, then I think this is a contradiction with official java documentation ...
I'm using Oracle8i (version 8.1.7) and Oracle JDBC Thin Driver (Windows NT) for use with JDK 1.2.x. Moreover, in my database istance the parameter "maximum open cursor" is equal to 800 ...
Thank you very much for suggestions :-)

There is no need to close a prepared statement or its resultset for every iteration.
After the first iteration in a loop, all subsequent executions of it will close the previous resultset. By adding close() method, you are making one extra costly call to the DB for no reason.
Following is the sample code.I know what you are saying. In fact at the beginning I wrote my code in the same way of your sample (see the code of my first post at the begin of this page).
But doing so, after thousand iterations of the loop, I had "Oracle Error ORA-1000 : maximun open cursor exeeded" even if in my database istance the parameter "maximum open cursor" is equal to 8000.
At this moment in my code, for each iteration, I close the PreparedStatement and in this way I don't have anymore the error :-((
So it seems that only in theory we can reuse a preparedStatement without closing it. In fact if we see the oracle system table "$open_cursor" (as Konrad Pietzka suggest me) we can find that, for each interation,
at our line code "rs = pstmt.executeQuery();" correspond a new cursor in the database: this means that for each method "pstmt.executeQuery()" the database open a new cursor and do not use the previous one as it should.
I posted a question two months ago to search if someone had the same problem (it seems that Konrad Pietzka had the same situation) and was able to explain me what is the cause.
The only reason I found by myself for this problem, is that probably the Oracle JDBC Thin Driver for Windows NT/2000 has some bugs... but I'm not sure ...
Thank you very much for you time !!
bye :-))
Fidalma

How to insert bulk data into ms-access

Hi,
I am trying to insert bulk data into ms-access. I used Statement it is
working fine but not allowing to insert single quote. Then I tryed with
PreparedStatement which is allowing single quote but not allowing bulk data. The following error i am getting.
javax.servlet.ServletException: [Microsoft][ODBC Microsoft Access Driver]String data, right truncated (null)
please help me..
guru

have u tried out the memo datatype in access?

Error -ORA-01483: invalid length for DATE or NUMBER bind variable

In discoverer plus, attempt to save a discoverer workbook into the database fails with the error:
ORA-01483 invalid length for DATE or NUMBER bind variable
The same workbook can be safely saved in "My Computer".
Any idea why and what is the solution.

Why: not quite sure, probably the code is validating the workbook when it saves it to the db and you've got an error in the sql. What happens when you run the workbook that you saved to the file system? Does it show the same error when run?
Solution: Can you post the sql in the workbook? In the meantime try the following: Replace any to_char statements around dates with to_date statements instead. For example:
Replace:
where to_char(mydate, 'dd-mon-yyyy') = '05-apr-2009'
With:
where mydate = to_date('05-APR-2009','DD-MON-YYYY')

Oracle Error :: ORA-12637 Packet receive failed

Hi buddies,
One of my staff's PC is receiving this error sometimes when she is trying to connect to the database and she is able to connect sometimes.
Oracle Error :: ORA-12637 Packet receive failed What could be the cause.
I tried replacing her tnsadmin with my tnsadmin and it didn't make a change, still able to connnect sometimes and sometimes not.
Able to connect using PL/SQL developer, but not using our customized application. (Everyone else are able to connect)
Is it network problem?
Please advice.
Thank You very much.
Alagu
Edited by: user645399 on Sep 16, 2009 8:37 PM

And from this cut-and-paste the OP is supposed to take what actions to solve the problem? Please don't just post that which is one google away every time someone posts an ORA- exception. You make some valuable contributions here but just posting expanded text doesn't give someone a list of actions to take that will help them resolve the issue. Better the question is left unanswered so others will be more likely to offer help.
To the OP:
It is highly likely you have a network issue and the fact that it is isolated to a single machine makes it reasonably easy to fix. First try to figure out which component is failing. Go to the router or switch and swap wires between that client machine and another one that is working properly. Does the problem move? If not then swap the wires. Again does the problem move? Next the NIC card? What if you put another machine on the desk and put the original hard disk in it?
Sometimes it just isn't worth the effort so you just swap out the machine.
Intermittent problems are always hard to identify and fix. What is on your side is that this is only affecting a single user.

APP-DT-34605:Oracle error ORA-4098 occured while writing to PER_ALL_ASSIGNM

We have Upgraded DB from 10.2.0.2 to 10.2.0.5 having same Apps version 11.5.10.2,
we have seen below issue upon upgrade,
While updating any information in Assignment i.e. Assignment Status getting following error.
APP-DT-34605:Oracle error ORA-4098 occured while writing to PER_ALL_ASSIGNMENTS_F
How to overcome these errors, please advise,
RM

Please see these docs.
PERWSHRG: Updating Assignment Gives Error APP-DT-34605 ORA-6510 [ID 286294.1]
Update Employee Assignment Details Cause Error: APP-DT-34605-- ORA-20001 occurred writing to PER_ALL_ASSIGNMENTS_F [ID 793451.1]
APP-DT-34605 Error When Saving on Assignment Form [ID 829292.1]
Receive APP-DT-34605 Error When Updating an Existing Payment Method [ID 780090.1]
ORA-06508 PL/SQL Could Not Find Program Unit Being Called: "APPS.PAY_PAY_SHD" [ID 1170903.1]
Thanks,
Hussein

'Error 8 occurred when starting the data extraction program'

Hello Experts,
I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
But when I check the extractor through RSA3, it looks fine.
Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
Thanks
Regards,
KP

Hi,
Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
rgds,
Edited by: Krishna Rao on May 6, 2009 3:22 PM

Error ORA-06502 When using function REPLACE in PL/SQL

Hi,
I have a PL/SQL procedure which gives error 'Error ORA-06502 When using function REPLACE in PL/SQL' when the string value is quite long (I noticed this with a string 9K in length)
variable var_a is of type CLOB
and the assignment statement where it gives the error is
var_a := REPLACE(var_a, '^', ''',''');
Can anyone please help!
Thanks

Even then that shouldn't do so:
SQL> select overload, position, argument_name, data_type, in_out
2 from all_arguments
3 where package_name = 'STANDARD'
4 and object_name = 'LPAD'
5 order by 1,2
6 /
OVERLOAD   POSITION ARGUMENT_NAME                  DATA_TYPE                      IN_OUT
1                 0                                VARCHAR2                       OUT
1                 1 STR1                           VARCHAR2                       IN
1                 2 LEN                            BINARY_INTEGER                 IN
1                 3 PAD                            VARCHAR2                       IN
2                 0                                VARCHAR2                       OUT
2                 1 STR1                           VARCHAR2                       IN
2                 2 LEN                            BINARY_INTEGER                 IN
3                 0                                CLOB                           OUT
3                 1 STR1                           CLOB                           IN
3                 2 LEN                            NUMBER                         IN
3                 3 PAD                            CLOB                           IN
4                 0                                CLOB                           OUT
4                 1 STR1                           CLOB                           IN
4                 2 LEN                            NUMBER                         INI wonder what happened?

Error 7 occurred when generating the data transfer program

Hello All ,
In Master Data Load Process Chain , we get error like
1. System Response
Caller 09 contains an error message.
Diagnosis
Error 7 occurred when generating the data transfer program for the requested InfoSource.
System Response
The data transfer is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
Note : We faced this issue for two days now . Just repeating the load make it success .
If any one faced and fixed this issue . Please let me know .
Thanks in advance .

Hi,
. Initially goto transaction SE38, Run the program RSDS_DATASOURCE_ACTIVATE_ALL. Give your Datasource name, and source system and check the check box for "Only Inactive objects".
This will actiavate the given datasource.
2. Replicate the datasource in RSA1.
3. Try to schedule the infopackage for the datasource which you have activated now.
4. IF infopackage runs through, Repeat the process for all datasources ie uncheck the check box, which means it will activate all datasources for the source system.
Also make sure that there will be enough Back Ground Processor available....
Reduce the parallel process
Thanks
BVR

Oracle Error Ora-27069 when inserting bulk data

Similar Messages

Maybe you are looking for