"Oracle initialization or shut down in progress" problem

I installed oracle 9i on windows xp 2002 service pack2 before 20 days, it was working fine till now but now when i try to login from scott user with correct password it is giving oracle initialization or shut down in progress error and not letting me login.
Any solution please?

ora-00214:Control file
'D:\General\1mcs\oracle\oradata\globaldb3\CONTROL01.CTL' version 16889
inconsistent with file
'D:\General\1mcs\oracle\oradata\globaldb3\CONTROL02.CTL' version 16885 Error: ORA 214
Text: control file <name> version <num> inconsistent with file <name>
version <num>
Cause: An inconsistent set of control files, datafiles, and redo log files
was used.
Action: Use a consistent set of control files, datafiles, and redo log files.
That is, all the files must be for the same database and from the same
time period.
edit you pfile, and set the control file as only any one of that and startup, If not try with second one. check by which controlfile you can able to open database, so that later you can multiplex the controlfile.

Similar Messages

Toad: Oracle initialization or shut down in progress

Hi,
When i am going to login to Toad, it is showing an error like "Toad: Oracle initialization or shut down in progress".
The network people, they have restarted the server many a times, after that i loging to Toad..
I am also not able to connect through SQL+PLUS, the same error shows...
Please needed your suggestion on the same..
Thanks,
Haraprasad...

When i am going to login to Toad, it is showing an error like "Toad: Oracle initialization or shut down in progress".The error self describes itself. The database isn't up or is being shut down while you are connecting.
log on to server and execute the below steps:
sqlplus / as sysdba
select open_mode from v$database;
if you see "READ WRITE" you can then log in by whichever way you want.
hth

Oracle initialization or shut down in progress

dear all
i am using oracle 10 g
operating system window xp.
i am facing following error
SQL> recover datafile 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF'
ORA-00283: recovery session canceled due to errors
ORA-00341: log 3 of thread 1, wrong log # 2 in header
ORA-00312: online log 3 thread 1:
'D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG'
please if anyone could help me to solve this problem.
many many Thanks in advance
Nadeem asif

Hi,
Herewith my error msg when i run through the process.
SQL> connect sys/oracle9i as sysdba
Connected.
SQL> shutdown immediate
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 135338868 bytes
Fixed Size 453492 bytes
Variable Size 109051904 bytes
Database Buffers 25165824 bytes
Redo Buffers 667648 bytes
Database mounted.
ORA-00354: corrupt redo log block header
ORA-00353: log corruption near block 200770 change 18748356 time 05/27/2009
09:32:11
ORA-00312: online log 3 thread 1: 'C:\ORACLE\ORADATA\ORCL\REDO03.LOG'
Pls guide me how to resolve this issue..thk

Ora 01033: Oracle Initialization or shut down in prrogress

Dear all
i am working on oracle 10g, operating system Windows XP
I am trying to connect to oracle but following error is received "Ora 01033 oracle initialization or shut down in progress"
Please if any could help me to solve this problem i will be thankfull to him
Thanks
Regards
Nadeem asif

hi dear
these are the last 50 lines from "alert_orcl.log" file
System parameters with non-default values:
processes = 150
__shared_pool_size = 109051904
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = D:\ORACLE\PRODUCT\10.2.0\DB_1\DBS\SPFILEORCL.ORA
sga_target = 289406976
control_files = D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL, D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL02.CTL, D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 163577856
compatible = 10.2.0.1.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = D:\oracle\product\10.2.0/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=orclXDB)
job_queue_processes = 10
audit_file_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\ADUMP
background_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\BDUMP
user_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\UDUMP
core_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\CDUMP
db_name = orcl
open_cursors = 300
pga_aggregate_target = 95420416
MMAN started with pid=4, OS id=560
PSP0 started with pid=3, OS id=500
DBW0 started with pid=5, OS id=568
LGWR started with pid=6, OS id=536
CKPT started with pid=7, OS id=508
SMON started with pid=8, OS id=624
RECO started with pid=9, OS id=1032
CJQ0 started with pid=10, OS id=1056
MMON started with pid=11, OS id=1052
MMNL started with pid=12, OS id=1048
Wed Jul 14 00:07:33 2010
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
PMON started with pid=2, OS id=548
Wed Jul 14 00:07:37 2010
alter database mount exclusive
Setting recovery target incarnation to 2
Wed Jul 14 00:07:43 2010
Successful mount of redo thread 1, with mount id 1252064969
Wed Jul 14 00:07:43 2010
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Wed Jul 14 00:07:44 2010
alter database open
ORA-1589 signalled during: alter database open...

Ora not available. Initialization or shut down in progress. TNS listner ...

I developed an application using VB.NET 2003 and Oracle 10g backend. When I start my machine and work on my application, everything works fine for two to three times execution. After some time when I execute my application it gives different errors every time. Sometimes:
Oracle not available
sometimes, TNS Listner cannot listen to ....
sometimes, Oracle Initialization or Shut Down in progress.
Why?

Hi,
Below three error is different.
Oracle not available
connect with sysdba privs users
and give
STARTUPsometimes, TNS Listner cannot listen to ....
if 10g then first set ORACLE_SID and connect with sysdba user WITHOUT "TNS_ENTRY"
conn sys as sysdba
passwordsometimes, Oracle Initialization or Shut Down in progress.
shutdown in progress ... you have to wait for complete shutdown.
you can check status of database through connect with sysdba privs.
select STATUS from v$instance;Why?

Oracle intialization or shut down in progress

Hello every one
i have installed database 10g release 2 on windows 2003 R2 standard edition
and after creating DB with SID orcl with no logic reason when i connect to it
it gave me oracle intialization or shut down in progress message and doesn't connect
The H/W of the machine is
Processor :4 intel xeon cpu 3.6ghz
hard disks:5HDD SCZI (each 147 GB)
ram : 4G ram

Hi
Did you try this?
On command prompt type
SET ORACLE_SID=ORCL
SQLPLUS "/ AS SYSDBA"
If it connects to an idle instance you will have to startup the DB.
SQL>STARTUP
One more thing you can try is to SHUTDOWN IMMEDIATE or SHUTDOWN ABORT and then STARTUP again to confirm that DB starts normally.
Also, do you see any errors in the alert log file?
Regards
Adnan
Message was edited by:
amashhadi

Error ORA-01033 oracle intialization or shut down in progress

Hi ,
I am getting the error when i try to login to oracle
Error ORA-01033 oracle intialization or shut down in progress.
i waited for much time but i get the same error.can some one help.
Thanks

442321, if a startup is in process you will need to either let it complete or cancel it in order to connect with a non sysdba session.
You cancel the startup the same way you would kill a hung shutdown by connecting as sysdba and then issueing a shutdown abort.
You should review the alert log prior to issuing an abort to see what is going on.
HTH -- Mark D Powell --

Mac shut down due to problem; I rebooted fine. how do I determine what the problem was?

mac shut down due to problem; I rebooted fine. how do I determine what the problem was?

When shut down and rebooted, the Mac OS X does background maintenance on the system. That can solve minor issues.
Beyond this, it is a good idea to run Disk Repair yourself just to make sure.
Reboot with the option key held down. On the screen that comes up select the Recovery disk icon and Continue.
On the next screen Clcik Disk Utility and Continue.
In DU, in the list on the left select the drive to be repaired - click the item that is indented to the right, not an an item whose name starts on the far left.
Click First Aid, then Repair Disk.
After that is done, quit DU and restart as usual.

How do I configure my system so that Oracle 10g properly shuts down and sta

How do I configure my system so that Oracle 10g properly shuts down and starts up when I reboot my Solaris system?

http://download.oracle.com/docs/cd/B19306_01/server.102/b15658/strt_stp.htm#sthref255

I just recently updated to the OS X soft wear and every time I go on iPhoto or iMessage my computer shuts down. This problem doesn't occur when I log into my laptop as a guest. I have a Mac book pro made in 2010.

I just recently updated to the OS X soft wear and every time I go on iPhoto or iMessage my computer shuts down. This problem doesn't occur when I log into my laptop as a guest. I have a Mac book pro made in 2010.

Any error message?

Oracle 10g - Not Shutting Down in Vista Home Premium.

Hello Guys.
I installed Oracle 10gR2 successfully on Vista Home Premium.. I can even make a table which logging as a Sysdba .. but when i want to Shutdown the database, it doesn't shutdown .
I re-installed Oracle 10gR2 thrice and create/delete database more than 10 times .. Still No luck ..
Here is the alert_log
Dump file e:\oracle\admin\test\bdump\alert_test.log
Fri Jul 04 21:50:58 2008
ORACLE V10.2.0.3.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V6.0
CPU : 2 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:882M/2045M, Ph+PgF:2950M/4313M, VA:1927M/2047M
Fri Jul 04 21:50:59 2008
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.3.0.
System parameters with non-default values:
processes = 150
sga_target = 612368384
control_files = E:\ORACLE\ORADATA\TEST\CONTROL01.CTL, E:\ORACLE\ORADATA\TEST\CONTROL02.CTL, E:\ORACLE\ORADATA\TEST\CONTROL03.CTL
db_block_size = 8192
compatible = 10.2.0.3.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = E:\oracle\flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=testXDB)
job_queue_processes = 10
audit_file_dest = E:\ORACLE\ADMIN\TEST\ADUMP
background_dump_dest = E:\ORACLE\ADMIN\TEST\BDUMP
user_dump_dest = E:\ORACLE\ADMIN\TEST\UDUMP
core_dump_dest = E:\ORACLE\ADMIN\TEST\CDUMP
db_name = test
open_cursors = 300
pga_aggregate_target = 203423744
PMON started with pid=2, OS id=5216
PSP0 started with pid=3, OS id=1776
MMAN started with pid=4, OS id=6120
DBW0 started with pid=5, OS id=1236
LGWR started with pid=6, OS id=4388
CKPT started with pid=7, OS id=4444
SMON started with pid=8, OS id=1232
RECO started with pid=9, OS id=5728
CJQ0 started with pid=10, OS id=5104
MMON started with pid=11, OS id=1960
Fri Jul 04 21:51:02 2008
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=1340
Fri Jul 04 21:51:02 2008
starting up 1 shared server(s) ...
Fri Jul 04 21:51:07 2008
The input backup piece E:\ORACLE\ORA102\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE.DFB is in compressed format.
Fri Jul 04 21:51:39 2008
Full restore complete of datafile 4 to datafile copy E:\ORACLE\ORADATA\TEST\USERS01.DBF. Elapsed time: 0:00:02
checkpoint is 521802
Full restore complete of datafile 2 to datafile copy E:\ORACLE\ORADATA\TEST\UNDOTBS01.DBF. Elapsed time: 0:00:02
checkpoint is 521802
Fri Jul 04 21:52:06 2008
Full restore complete of datafile 3 to datafile copy E:\ORACLE\ORADATA\TEST\SYSAUX01.DBF. Elapsed time: 0:00:30
checkpoint is 521802
last deallocation scn is 521589
Fri Jul 04 21:52:21 2008
Full restore complete of datafile 1 to datafile copy E:\ORACLE\ORADATA\TEST\SYSTEM01.DBF. Elapsed time: 0:00:55
checkpoint is 521802
last deallocation scn is 515202
Fri Jul 04 21:52:22 2008
Create controlfile reuse set database "test"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'E:\oracle\oradata\test\SYSTEM01.DBF',
'E:\oracle\oradata\test\UNDOTBS01.DBF',
'E:\oracle\oradata\test\SYSAUX01.DBF',
'E:\oracle\oradata\test\USERS01.DBF'
LOGFILE GROUP 1 ('E:\oracle\oradata\test\redo01.log') SIZE 51200K,
GROUP 2 ('E:\oracle\oradata\test\redo02.log') SIZE 51200K,
GROUP 3 ('E:\oracle\oradata\test\redo03.log') SIZE 51200K RESETLOGS
WARNING: Default Temporary Tablespace not specified in CREATE DATABASE command
Default Temporary Tablespace will be necessary for a locally managed database in future release
Setting recovery target incarnation to 1
Fri Jul 04 21:52:25 2008
Successful mount of redo thread 1, with mount id 1957322646
Fri Jul 04 21:52:25 2008
Completed: Create controlfile reuse set database "test"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'E:\oracle\oradata\test\SYSTEM01.DBF',
'E:\oracle\oradata\test\UNDOTBS01.DBF',
'E:\oracle\oradata\test\SYSAUX01.DBF',
'E:\oracle\oradata\test\USERS01.DBF'
LOGFILE GROUP 1 ('E:\oracle\oradata\test\redo01.log') SIZE 51200K,
GROUP 2 ('E:\oracle\oradata\test\redo02.log') SIZE 51200K,
GROUP 3 ('E:\oracle\oradata\test\redo03.log') SIZE 51200K RESETLOGS
Shutting down instance: further logons disabled
Fri Jul 04 21:52:26 2008
Stopping background process MMNL
Fri Jul 04 21:52:27 2008
Stopping background process CJQ0
Fri Jul 04 21:52:27 2008
Stopping background process MMON
Fri Jul 04 21:52:28 2008
Shutting down instance (immediate)
License high water mark = 1
Fri Jul 04 21:52:28 2008
Stopping Job queue slave processes
Fri Jul 04 21:52:28 2008
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Fri Jul 04 21:52:30 2008
ALTER DATABASE CLOSE NORMAL
ORA-1109 signalled during: ALTER DATABASE CLOSE NORMAL...
Fri Jul 04 21:52:30 2008
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Fri Jul 04 21:52:33 2008
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.3.0.
System parameters with non-default values:
processes = 150
sga_target = 612368384
control_files = E:\ORACLE\ORADATA\TEST\CONTROL01.CTL, E:\ORACLE\ORADATA\TEST\CONTROL02.CTL, E:\ORACLE\ORADATA\TEST\CONTROL03.CTL
db_block_size = 8192
compatible = 10.2.0.3.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = E:\oracle\flash_recovery_area
db_recovery_file_dest_size= 2147483648
norecovery_through_resetlogs= TRUE
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=testXDB)
audit_file_dest = E:\ORACLE\ADMIN\TEST\ADUMP
background_dump_dest = E:\ORACLE\ADMIN\TEST\BDUMP
user_dump_dest = E:\ORACLE\ADMIN\TEST\UDUMP
core_dump_dest = E:\ORACLE\ADMIN\TEST\CDUMP
db_name = test
open_cursors = 300
pga_aggregate_target = 203423744
PMON started with pid=2, OS id=2196
PSP0 started with pid=3, OS id=2628
MMAN started with pid=4, OS id=4080
DBW0 started with pid=5, OS id=4544
LGWR started with pid=6, OS id=5296
CKPT started with pid=7, OS id=4660
SMON started with pid=8, OS id=5180
RECO started with pid=9, OS id=5600
MMON started with pid=10, OS id=4620
MMNL started with pid=11, OS id=3788
Fri Jul 04 21:52:33 2008
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Fri Jul 04 21:52:34 2008
Create controlfile reuse set database "test"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'E:\oracle\oradata\test\SYSTEM01.DBF',
'E:\oracle\oradata\test\UNDOTBS01.DBF',
'E:\oracle\oradata\test\SYSAUX01.DBF',
'E:\oracle\oradata\test\USERS01.DBF'
LOGFILE GROUP 1 ('E:\oracle\oradata\test\redo01.log') SIZE 51200K,
GROUP 2 ('E:\oracle\oradata\test\redo02.log') SIZE 51200K,
GROUP 3 ('E:\oracle\oradata\test\redo03.log') SIZE 51200K RESETLOGS
Fri Jul 04 21:52:34 2008
WARNING: Default Temporary Tablespace not specified in CREATE DATABASE command
Default Temporary Tablespace will be necessary for a locally managed database in future release
Setting recovery target incarnation to 1
Fri Jul 04 21:52:38 2008
Successful mount of redo thread 1, with mount id 1957335970
Fri Jul 04 21:52:38 2008
Completed: Create controlfile reuse set database "test"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'E:\oracle\oradata\test\SYSTEM01.DBF',
'E:\oracle\oradata\test\UNDOTBS01.DBF',
'E:\oracle\oradata\test\SYSAUX01.DBF',
'E:\oracle\oradata\test\USERS01.DBF'
LOGFILE GROUP 1 ('E:\oracle\oradata\test\redo01.log') SIZE 51200K,
GROUP 2 ('E:\oracle\oradata\test\redo02.log') SIZE 51200K,
GROUP 3 ('E:\oracle\oradata\test\redo03.log') SIZE 51200K RESETLOGS
Fri Jul 04 21:52:38 2008
Stopping background process MMNL
Fri Jul 04 21:52:39 2008
Stopping background process MMON
Starting background process MMON
Starting background process MMNL
MMON started with pid=10, OS id=5824
MMNL started with pid=11, OS id=5472
Fri Jul 04 21:52:40 2008
ALTER SYSTEM enable restricted session;
Fri Jul 04 21:52:40 2008
alter database "test" open resetlogs
Fri Jul 04 21:52:40 2008
RESETLOGS after incomplete recovery UNTIL CHANGE 521802
Fri Jul 04 21:52:40 2008
Errors in file e:\oracle\admin\test\udump\test_ora_3664.trc:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: 'E:\ORACLE\ORADATA\TEST\REDO01.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Jul 04 21:52:45 2008
Errors in file e:\oracle\admin\test\udump\test_ora_3664.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'E:\ORACLE\ORADATA\TEST\REDO02.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Jul 04 21:52:49 2008
Errors in file e:\oracle\admin\test\udump\test_ora_3664.trc:
ORA-00313: open failed for members of log group 3 of thread 1
ORA-00312: online log 3 thread 1: 'E:\ORACLE\ORADATA\TEST\REDO03.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Jul 04 21:52:54 2008
Setting recovery target incarnation to 2
Fri Jul 04 21:52:54 2008
Assigning activation ID 1957335970 (0x74aa93a2)
Thread 1 opened at log sequence 1
Current log# 3 seq# 1 mem# 0: E:\ORACLE\ORADATA\TEST\REDO03.LOG
Successful open of redo thread 1
Fri Jul 04 21:52:55 2008
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Fri Jul 04 21:52:55 2008
SMON: enabling cache recovery
Fri Jul 04 21:52:56 2008
Successfully onlined Undo Tablespace 1.
Dictionary check beginning
Tablespace 'TEMP' #3 found in data dictionary,
but not in the controlfile. Adding to controlfile.
Dictionary check complete
Fri Jul 04 21:52:56 2008
SMON: enabling tx recovery
Fri Jul 04 21:52:56 2008
WARNING: The following temporary tablespaces contain no files.
This condition can occur when a backup controlfile has
been restored. It may be necessary to add files to these
tablespaces. That can be done using the SQL statement:
ALTER TABLESPACE <tablespace_name> ADD TEMPFILE
Alternatively, if these temporary tablespaces are no longer
needed, then they can be dropped.
Empty temporary tablespace: TEMP
Database Characterset is US7ASCII
Threshold validation cannot be done before catproc is loaded.
Threshold validation cannot be done before catproc is loaded.
WARNING: Files may exists in db_recovery_file_dest
that are not known to the database. Use the RMAN command
CATALOG RECOVERY AREA to re-catalog any such files.
One of the following events caused this:
1. A backup controlfile was restored.
2. A standby controlfile was restored.
3. The controlfile was re-created.
4. db_recovery_file_dest had previously been enabled and
then disabled.
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=15, OS id=1136
Fri Jul 04 21:53:00 2008
LOGSTDBY: Validating controlfile with logical metadata
Fri Jul 04 21:53:00 2008
LOGSTDBY: Validation complete
Global Name changed to TEST
Completed: alter database "test" open resetlogs
Fri Jul 04 21:53:03 2008
alter database rename global_name to "test"
Completed: alter database rename global_name to "test"
Fri Jul 04 21:53:03 2008
ALTER TABLESPACE TEMP ADD TEMPFILE 'E:\oracle\oradata\test\TEMP01.DBF' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
Completed: ALTER TABLESPACE TEMP ADD TEMPFILE 'E:\oracle\oradata\test\TEMP01.DBF' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
Fri Jul 04 21:53:05 2008
ALTER DATABASE DEFAULT TABLESPACE "USERS"
Completed: ALTER DATABASE DEFAULT TABLESPACE "USERS"
Fri Jul 04 21:53:05 2008
alter database character set INTERNAL_CONVERT WE8MSWIN1252
Fri Jul 04 21:53:14 2008
Updating character set in controlfile to WE8MSWIN1252
Synchronizing connection with database character set information
Refreshing type attributes with new character set information
Completed: alter database character set INTERNAL_CONVERT WE8MSWIN1252
Fri Jul 04 21:53:19 2008
ALTER SYSTEM disable restricted session;
Fri Jul 04 21:53:20 2008
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Fri Jul 04 21:53:22 2008
Starting background process CJQ0
CJQ0 started with pid=18, OS id=2848
Fri Jul 04 21:53:31 2008
Starting background process EMN0
EMN0 started with pid=21, OS id=4088
Fri Jul 04 21:53:31 2008
Shutting down instance: further logons disabled
Fri Jul 04 21:53:36 2008
Stopping background process QMNC
Fri Jul 04 21:53:36 2008
Stopping background process CJQ0
Fri Jul 04 21:53:38 2008
Stopping background process MMNL
Fri Jul 04 21:53:39 2008
Stopping background process MMON
Fri Jul 04 21:53:40 2008
Shutting down instance (immediate)
License high water mark = 4
All dispatchers and shared servers shutdown
Fri Jul 04 21:53:47 2008
ALTER DATABASE CLOSE NORMAL
Fri Jul 04 21:53:47 2008
SMON: disabling tx recovery
SMON: disabling cache recovery
Fri Jul 04 21:53:48 2008
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thread 1 closed at log sequence 1
Successful close of redo thread 1
Fri Jul 04 21:53:48 2008
Completed: ALTER DATABASE CLOSE NORMAL
Fri Jul 04 21:53:48 2008
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Fri Jul 04 21:53:51 2008
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.3.0.
System parameters with non-default values:
processes = 150
sga_target = 612368384
control_files = E:\ORACLE\ORADATA\TEST\CONTROL01.CTL, E:\ORACLE\ORADATA\TEST\CONTROL02.CTL, E:\ORACLE\ORADATA\TEST\CONTROL03.CTL
db_block_size = 8192
compatible = 10.2.0.3.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = E:\oracle\flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=testXDB)
job_queue_processes = 10
audit_file_dest = E:\ORACLE\ADMIN\TEST\ADUMP
background_dump_dest = E:\ORACLE\ADMIN\TEST\BDUMP
user_dump_dest = E:\ORACLE\ADMIN\TEST\UDUMP
core_dump_dest = E:\ORACLE\ADMIN\TEST\CDUMP
db_name = test
open_cursors = 300
pga_aggregate_target = 203423744
PMON started with pid=2, OS id=5096
PSP0 started with pid=3, OS id=5136
MMAN started with pid=4, OS id=4880
DBW0 started with pid=5, OS id=3532
LGWR started with pid=6, OS id=3724
CKPT started with pid=7, OS id=1240
SMON started with pid=8, OS id=5440
RECO started with pid=9, OS id=2272
CJQ0 started with pid=10, OS id=5084
MMON started with pid=11, OS id=4944
Fri Jul 04 21:53:52 2008
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2352
Fri Jul 04 21:53:52 2008
starting up 1 shared server(s) ...
Fri Jul 04 21:53:53 2008
ALTER DATABASE MOUNT
Fri Jul 04 21:53:57 2008
Setting recovery target incarnation to 2
Fri Jul 04 21:53:57 2008
Successful mount of redo thread 1, with mount id 1957360881
Fri Jul 04 21:53:57 2008
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Fri Jul 04 21:53:58 2008
ALTER DATABASE OPEN
Fri Jul 04 21:53:59 2008
Thread 1 opened at log sequence 1
Current log# 3 seq# 1 mem# 0: E:\ORACLE\ORADATA\TEST\REDO03.LOG
Successful open of redo thread 1
Fri Jul 04 21:53:59 2008
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Fri Jul 04 21:53:59 2008
SMON: enabling cache recovery
Fri Jul 04 21:54:00 2008
Successfully onlined Undo Tablespace 1.
Fri Jul 04 21:54:00 2008
SMON: enabling tx recovery
Fri Jul 04 21:54:00 2008
Database Characterset is WE8MSWIN1252
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=16, OS id=4852
Fri Jul 04 21:54:07 2008
Completed: ALTER DATABASE OPEN
Fri Jul 04 21:54:07 2008
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Fri Jul 04 21:55:23 2008
SERVER COMPONENT id=UTLRP_BGN: timestamp=2008-07-04 21:55:23
SERVER COMPONENT id=UTLRP_END: timestamp=2008-07-04 21:55:24
Fri Jul 04 21:58:45 2008
create tablespace sachin datafile 'E:\oracle\oradata\test\SACHIN01.DBF' size 5m
Fri Jul 04 21:58:46 2008
Completed: create tablespace sachin datafile 'E:\oracle\oradata\test\SACHIN01.DBF' size 5m
Fri Jul 04 22:00:11 2008
Starting background process EMN0
EMN0 started with pid=29, OS id=3172
Fri Jul 04 22:00:11 2008
Shutting down instance: further logons disabled
Fri Jul 04 22:02:27 2008
kkjcre1p: unable to spawn jobq slave process, error 1090
Fri Jul 04 22:02:32 2008
kkjcre1p: unable to spawn jobq slave process, error 1090
Fri Jul 04 22:03:02 2008
kkjcre1p: unable to spawn jobq slave process, error 1090
Fri Jul 04 22:22:28 2008
Oracle Instance Startup operation failed. Another process may be attempting to startup or shutdown this Instance.
Failed to acquire instance startup/shutdown serialization primitive
Fri Jul 04 22:30:02 2008
ksvcreate: Process(m000) creation failed
Fri Jul 04 22:31:02 2008
ksvcreate: Process(m000) creation failed
Fri Jul 04 22:32:02 2008
ksvcreate: Process(m000) creation failed
Fri Jul 04 22:33:02 2008
ksvcreate: Process(m000) creation failed
Fri Jul 04 22:34:02 2008
ksvcreate: Process(m000) creation failed

Hi,
From the alert log what you have posted :-
You have a restore of Existing DB from different DB to this New One
WARNING: Default Temporary Tablespace not specified in CREATE DATABASE command
Default Temporary Tablespace will be necessary for a locally managed database in future release
Setting recovery target incarnation to 1
After shutting Down completed "Fri Jul 04 21:52:33 2008"
How come July 4th... (Could not understand this, from which place
your are from)
Started instance
--Starting ORACLE instance (normal)
After that tried to create database Once again
then due to that File got corrupted
ORA-00312: online log 1 thread 1: 'E:\ORACLE\ORADATA\TEST\REDO01.LOG'
Yoy might have not created DB correctly or restored. So kindly drop everthing (DB), if it is a testing Machine, then Clear the Services First from machine Delete all files with respective DB and re-do the Job with out any mistakes.
Thanks & Regards,
Pavan Kumar N

Macintosh HD greyed out and shut down after progress bar complets

Hello everyone, after i manually closed my macbook by holding the shut down button for 5secs due to an application crush, my macbook pro doesnt seem to be able to boot anymore. It executes the progress bar under the apple icon on the screen (trying to repair my hd) and after it completes the process, it shuts down. When i press cmd+R, i can see from disk utilities the 500GB hard drive and the macintosh hd. The 500GB total hard drive is normal (even with no problems to fix after running verify and repair) but the Macintosh HD-part is greyed out and verify/repair fail with an error when i click on them. What should i do? i dont think its a hard drive failure. At least, how can i back up my system or some files? from disk utilities the new image function should be executed for the macintosh hd partition and not for the parent 500GB hard disk in order to make a backup, right?

1) In a Finder window, select the Macintosh HD. Can you see the contents? If yes, you can select to drag over files.
2) Download SuperDuper (free) When it opens does it recognize the internal drive in the popup? If yes, you will need to make a second portion on your external drive for the clone of your internal drive.
3) If you can't see the contents or the drive in Finder or SuperDuper then you will need to download and run Mavericks over the internal drive.

Oracle XE Not Shutting Down Cleanly

Hello all.
I've installed an Oracle XE on an Oracle EL 5.5.
Everything looks fine, except for the shutdown script. It does startup nicely with system starts, but if I shutdown the OS, the database just crashes, instead of shutting down cleanly.
Any ideas?
Thanks in advance.

Thu Sep 16 19:25:47 2010
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__shared_pool_size = 100663296
__large_pool_size = 12582912
__java_pool_size = 4194304
__streams_pool_size = 0
sga_target = 289406976
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 167772160
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 95420416
PMON started with pid=2, OS id=2149
PSP0 started with pid=3, OS id=2151
MMAN started with pid=4, OS id=2153
DBW0 started with pid=5, OS id=2155
LGWR started with pid=6, OS id=2157
CKPT started with pid=7, OS id=2159
SMON started with pid=8, OS id=2161
RECO started with pid=9, OS id=2163
MMON started with pid=11, OS id=2167
MMNL started with pid=12, OS id=2169
Thu Sep 16 19:25:49 2010
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
CJQ0 started with pid=10, OS id=2165
Thu Sep 16 19:25:49 2010
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Thu Sep 16 19:25:49 2010
ALTER DATABASE MOUNT
Thu Sep 16 19:25:53 2010
Setting recovery target incarnation to 2
Thu Sep 16 19:25:54 2010
Successful mount of redo thread 1, with mount id 2611042429
Thu Sep 16 19:25:54 2010
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Thu Sep 16 19:25:54 2010
ALTER DATABASE OPEN
Thu Sep 16 19:25:54 2010
Beginning crash recovery of 1 threads
Thu Sep 16 19:25:54 2010
Started redo scan
Thu Sep 16 19:25:54 2010
Completed redo scan
1388 redo blocks read, 229 data blocks need recovery
Thu Sep 16 19:25:55 2010
Started redo application at
Thread 1: logseq 20, block 2191
Thu Sep 16 19:25:55 2010
Recovery of Online Redo Log: Thread 1 Group 1 Seq 20 Reading mem 0
Mem# 0 errs 0: /usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/onlinelog/o1_mf_1_692fmvyr_.log
Thu Sep 16 19:25:55 2010
Completed redo application
Thu Sep 16 19:25:55 2010
Completed crash recovery at
Thread 1: logseq 20, block 3579, scn 588303
229 data blocks read, 229 data blocks written, 1388 redo blocks read
Thu Sep 16 19:25:55 2010
Thread 1 advanced to log sequence 21
Thread 1 opened at log sequence 21
Current log# 2 seq# 21 mem# 0: /usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/onlinelog/o1_mf_2_692fmx69_.log
Successful open of redo thread 1
Thu Sep 16 19:25:55 2010
SMON: enabling cache recovery
Thu Sep 16 19:25:57 2010
Successfully onlined Undo Tablespace 1.
Thu Sep 16 19:25:57 2010
SMON: enabling tx recovery
Thu Sep 16 19:25:57 2010
Database Characterset is AL32UTF8
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=19, OS id=2183
Thu Sep 16 19:26:00 2010
db_recovery_file_dest_size of 10240 MB is 0.98% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Thu Sep 16 19:26:01 2010
Completed: ALTER DATABASE OPEN

Shut down // start up problems

i am having power related problems on the intel mini and i want to know how widespread this is before i confront apple support. btw i love the mini--this is my 2nd mini. i have had a power on problem with a mini even on the day of purchase and it was exchanged graciously at the apple store in white plains this past july.<this was a power button failure issue>
here's whats happenning....1>it misbehaves on shut down or restart by software. there gets to a point where the screen is black but the white light on the box stays on and the vents in the back are still warm. my workaround is to manually shut down about a minute after the software shut down by holding down the power button on the back of the mini.
......2> start up problem. the mini wont always start when i push the power button. my workaround has been to turn off my surge protector for about 10 seconds then turn it back on and VIOLA the power button can start the mini. i guess it needs to be cold to work.
i have been reticent to go to the store because i rely on this machine too much and i am not the only user here.
can some reader disclose if such a hardware failure is known?
thanks in advance.

thanks. i hadn't thought about the surge protector.
keyboard and mouse are bluetooth.monitor is digital 24". i have an external powered usb hub which runs my time machine external drive. i keep everything else unplugged from the usb hub during startup and shutdown because my ipod shuffle caused startup problems in the past.
i had similar troubles with my first mini when it was plugged directly into a wall socket. the surge protector seems to help--at least i can cold start the mini without unplugging it.
i have a genius bar apptmt this evening and i will see what gives. i am glad i made apple put in their own overpriced ram so i never voided the warranty. maybe i will buy a care plan to cover myself when i am there. but i so want to raise this mini from 2 to 4 gig now that mem is so cheap. if i can get this problem stabilized...
my very first mini was powerpc and the ipod shuffle, according to genius bar, caused its demise due to usb 1.1 and usb2.0 handshaking problems. i still have it somewhere and plan to install a harddrive to get it going.
thanks again guys.
and i'd like to ask others again if this problem is more common.

Shut down and Reboot problems

Hi All
I hope I can find help for my problem as it is getting really frustrating. I have Lenovo X230 tablet which used to run fine until it suddenly will not shut down or reboot. The screen will turn black however the small led lights on power and other button
will remain on and the the laptop will remain like this until I press the power button to physically shut it down. When I tried to restore the system to an earlier point, the laptop will not reboot and I had to press the button again to shut it down and then
power it up. It showed after that reboot was successful but to no avail. I tried to reboot it to even an earlier point (still I had to manually reboot it) but it failed. All drivers are up to date and I always install Windows updates as soon as they are out.
Still I have to push the power button when I install new windows updates when reboot is required because the screen will go black as I already mentioned with the power still on. I do hope to get helo with this.
Thank you
Qas

Hi,
As this problem occures with no symptoms, in my opinion, it would be better to make system restore to revert your system to a former normal time point for test.
If the problem persists after system resotre successfully, it would be better to contact Lenovo support to check Hardware problem.
Roger Lu
TechNet Community Support

"Oracle initialization or shut down in progress" problem

Similar Messages

Maybe you are looking for