Oracle Report Server with Weblogic crash

Hello,
I am using Report Server 6i on WinNT and the web server used is WebLogic 6.0.. The reports generated are of HTMLCSS format or PDF format.
Cud U please send the replies for the below queries at the earliest..
1.The data in the generated report is well formatted and the pages exceeds 300.
If the report generated is of PDF format then it displays the report in less than 2 minutes.
We do get this report with HTML format also but with out the border for the tables.
Since we need the report with border to the tables, we are using HTMLCSS format.But we are facing problems with HTMLCSS format. HTMLCSS format report never shows up in the browser. The browser just Hangs up
However if the number of pages of the generated report is around 10, then the report is displayed in the browser in HTMLCSS format, without any problem.
Is there any way to get the border to the tables using HTML instead of HTMLCSS or Could u suggest us any solution for displaying report in HTMLCSS format.
2. If a report requested is of HTMLCSS format, and as mentioned above if the number of pages to be displayed is too large, before the report is displayed completely, if the browser is closed,then the Web Server associated with the Report Server crashes with the following error message based on type of JVM used
Please find the attached Error in quotes :
"In case of Classic JVM, a dialog box is displayed with the following message,
The instruction at "0x503b1709" referenced memory at "0x0000000c".The memory could not be "read".
Click on OK to terminate the application
Click on CANCEL to debug the application
In case of Hotspot JVM, the error displayed on the console of the Web Server is
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x6d449cef
Function name=(N/A)
Library=C:\jdk1.3.1_02\jre\bin\hotspot\jvm.dll
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions."
We had contacted the Weblogic people and the SUN people for the crash of the webserver .
We got the following replies from both them
Weblogic:
Hmm, looks like your native method is causing the JVM to crash. Notice that the current java thread is calling the native method from the Oracle servlet when the crash occurs. <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" />
You need to contact Oracle about this.
SUN:
Sounds to me like this servlet is executing some native code that does something illegal with memory, like a bad pointer access. That's often the cause of a segmentation violation and this kind of crash report from the JVM.
I would pursue the matter with Oracle, the vendor of your servlet, if you haven't already.
We had posted this in metalink also, but we could not get the solution for this problem.
So could you please look into this and send us the reply ASAP as it is very urgent.
Regards
Sudipta

Hi
What is the difference between the running and the not running (error) reports?
Do you use chinese characters in all of them?
Ott Karesz
http://www.trendo-kft.hu

Similar Messages

Oracle Reports 10g with Weblogic Server 10.3

Hello every body
I have ADF web fusion application in JDeveloper 11, I builded by reports using Oracle Reports 10, also I'm Deploying my project to Weblogic Server 10.3
Now, How could I invoke my Reports from JDeveloper ?
1st: Can I deploy my Reports (JSP Report paper layout) to Weblogic 10.3 and How ?
2nd: How Could I pass parameters from my Application (Builded usingJjDeveloper 11) to my reports ?
Thank you very much

I'm not sure if Reports 10 is certified on WLS 10.3 - you might want to check with the Oracle Reports guys on the Reports forum (or with Oracle support).
That said - when Fusion Middleware 11g will come out you'll have a single platform that will run both your reports and your ADF application on the same server.
In terms of invoking your reports and passing parameters - you can just use the URL way as described in the publishing reports manual to activate the report on the report server.
Link it to your application with a goLink component.

How to integrate Oracle Http Server with Weblogic

Weblogic supports Apache web server 2.0 and 2.2 to be a proxy server. Oracle Http Server (OHS) is based on Apache 2.0. I am trying to configure Weblogic to use OHS that comes with OAS install as proxy on Linux environment. I am unable to get the WLS plugin for Apache to work with OHS. When I tried to start the OHS, I got the following errors:
/oracle/product/10.1.3.1/OracleAS_3/Apache/Apache/bin/apachectl startssl: execing httpd
Syntax error on line 1125 of /oracle/product/10.1.3.1/OracleAS_3/Apache/Apache/conf/httpd.conf:
Cannot load /oracle/product/10.1.3.1/OracleAS_3/Apache/Apache/libexec/mod_wl128_20.so into server: /oracle/product/10.1.3.1/OracleAS_3/Apache/Apache/libexec/mod_wl128_20.so: undefined symbol: apr_pool_cleanup_null
I checked the library, and I found in several places, such as /usr/lib.
The following is the configuration that I put in http.conf file:
<IfModule mod_weblogic.c>
WebLogicCluster 127.0.0.1:7001
MatchExpression /AIP
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7001
DebugConfigInfo ON
PathTrim /weblogic
</Location>
Anybody knows how to fix this?
Thanks.

You're right: Weblogic supports Apache web server 2.0 and 2.2 to be a proxy server but you are using Oracle Application Server 10.1.3.1.0 which is based on Apache *1.3* as you can read in "Oracle® HTTP Server Administrator's Guide"
10g (10.1.3.1.0) - Part Number B28948-01 - 1.1 Oracle HTTP Server Features, right under "Based on Apache - HTTP v1.1 Support" at
http://download.oracle.com/docs/cd/B31017_01/web.1013/b28948/overview.htm#i1008837.
As far as I know, the only OHS based on Apache *2.0* is available as a standalone release: "Oracle HTTP Server (Apache 2.0) (10.1.3.3.0) for Linux x86" - 32bit. You can download it from http://www.oracle.com/technology/software/products/database/oracle11g/111060_linuxsoft.html (as_101330_apache2_lnx.zip).
I've tested it successfully.
Edited by: Virgil on Jan 15, 2009 3:08 AM

Oracle Report Server Issue with Japanese Characters

We are trying to setup a Oracle Report Server to print the Japanese characters in the PDF format.
We have separate Oracle Report servers for printing English, Chinese and Vietnamese characters in PDF formats using Oracle Reports in the production which are running properly with Unix AIX version 5.3. Now we have a requirement to print the Japanese characters. Hence we tried to setup the new server for the same and the configurations are done as same as Chinese/Vietnamese report servers. But we are not able to print the Japanese characters.
I am providing the details which we followed to configure this new server.
1.     We have modified the reports.sh to map the proper NLS_LANG (JAPANESE_AMERICA.UTF8) and other Admin folder settings.
2.     We have configured the new report server via OPMN admin.
3.     We have copied the arialuni.ttf to Printers folder and we have converted this same .ttf file in AFM format. This AFM file has been copied to $ORACLE_HOME/guicommon/gk/JP_Admin/AFM folder.
4.     We have modified the uifont.ali (JP_admin folder) file for font subsetting.
5.     We have put an entry in JP_admin/PPD/datap462.ppd as *Font ArialUnicodeMS: Standard "(Version 1.01)" Standard ROM
6.     We have modified the Tk2Motif.rgb (JP_admin folder) file for character set mapping (Tk2Motif*fontMapCs: iso8859-1=UTF8) as we have enabled this one for other report servers as well.
Environment Details:-
Unix AIX version : 5300-07-05-0831
Oracle Version : 10.1.0.4.2
NLS_LANG : JAPANESE_AMERICA.UTF8
Font Mapping : Font Sub Setting in uifont.ali
Font Used for Printing : arialuni.ttf (Font Name : Arial Unicode MS)
The error thrown in the rwEng trace (rwEng-0.trc) file is as below
[2011/9/7 8:11:4:488] Error 50103 (C Engine): 20:11:04 ERR REP-3000: Internal error starting Oracle Toolkit.
The error thrown when trying to execute the reports is…
REP-0177: Error while running in remote server
Engine rwEng-0 crashed, job Id: 67
Our investigations and findings…
1.     We disabled the entry Tk2Motif*fontMapCs: iso8859-1=UTF8 in Tk2Motif.rgb then started the server. We found that no error is thrown in the rwEng trace file and we are able to print the report also in PDF format… (Please see the attached japarial.pdf for your verification) but we are able to see only junk characters. We verified the document settings in the PDF file for ensuring the font sub set. We are able to see the font sub setting is used.
2.     If we enable the above entry then the rwEng trace throwing the above error (oracle toolkit error) and reports engine is crashed.
It will be a great help from you if you can assist us to resolve this issue…

Maybe 7zip or another tool has workarounds for broken file names, you could try that.
Or you could try to go over the files in the zip archive one-by-one and write it to files out-1, out-2, ..., out-$n without concerning yourself with the file names. You could get file endings back via the mimetype.
This script might work:
#include <stdio.h>
#include <zip.h>
static const char *template = "./out-%04d.bin";
int main(int argc, char**argv)
int err = 0;
zip_t *arc = zip_open((const char*)argv[1], ZIP_RDONLY, &err);
if(arc == NULL)
printf("Failed to open ZIP, error %d\n", err);
return -1;
zip_int64_t n = zip_get_num_entries(arc, 0);
printf("%s: # of packed files: %d\n", argv[1], n);
for(int i = 0; i < n; i++)
zip_stat_t stat;
zip_stat_index(arc, i, ZIP_FL_UNCHANGED, &stat);
char buf[stat.size];
char oname[sizeof(template)];
zip_file_t *f = zip_fopen_index(arc, (zip_int64_t)i, ZIP_FL_UNCHANGED);
zip_fread(f, (void*)&buf[0], stat.size);
snprintf(&oname[0], sizeof(template), template, i);
FILE *of = fopen(oname, "wb");
fwrite(&buf[0], stat.size, 1, of);
printf("%s: %s => %lu bytes\n", argv[1], oname, stat.size);
zip_fclose(f);
fclose(of);
zip_close(arc);
return 0;
Compile with
gcc -std=gnu99 -O3 -o unzip unzip.c -lzip
and run as
./unzip $funnyzipfile
You should get template-named, numbered output files in the current directory.
Last edited by 2ion (2015-05-21 23:09:29)

Oracle Report Server Not Accessible

Hi Folks,
I'm facing a series of issues with Oracle reports server 11g. I'l list the issues one by one.
1. I'm not able to start the weblogic server from the domain which i've created for Reports. It gives me authentication error. I've tried clearing tmp directory, clearing temp directory and creating a boot.properties in the security folder. But nothin seems to work.
2. I'm not able to start the report server from the instance path C:\Oracle\Middleware\asinst_1\bin\opmnctl.bat. The contents of opmnctl.bat is as follows
@ECHO OFF
SETLOCAL
set PERL5LIB=
set JAVA_HOME=C:\Oracle\Middleware\jdk160_29\bin
set ORACLE_HOME=C:\Oracle\Middleware\Oracle_FRHome1
set ORACLE_INSTANCE=C:\Oracle\Middleware\asinst_1
set OpmnService=OracleProcessManager_asinst_1
"C:\Oracle\Middleware\Oracle_FRHome1\opmn\bin\opmnctl.bat" %*
when i run this from cmd i get all the components as alive but i'm not able to access the reports path with the url. (http://domainname:7003/console or /em).
this says connection refused.
3. When i try to access the url http://domainname:8888/reports/rwservlet gives me apache bridge error. I've been trying all the things given in google for the past 1 week but still its not working.
This is my Oracle Forms and Repots Installation log:
Middleware Home Location: C:\Oracle\Middleware
          Oracle Home Location: C:\Oracle\Middleware\Oracle_FRHome1
          Oracle Instance Location: C:\Oracle\Middleware\asinst_1
          Oracle Instance: asinst_1
          Domain Option: Create Domain
          Domain Name: Sapphire
          Domain Home: C:\Oracle\Middleware\user_projects\domains\Sapphire
          Domain Host Name: PC201845.cts.com
          Domain Port No: 7001
          User Name: weblogic
          Automatic Port Detection: true
          Administrator Console: http://PC201845.cts.com:7001/console
          EM Console: http://PC201845.cts.com:7001/em
          EMAgent URL: http://PC201845.cts.com:5155/emd/main
          Forms URL: http://PC201845.cts.com:8888/forms/frmservlet
          Reports URL: http://PC201845.cts.com:8888/reports/rwservlet
I'm not able to login to any of this url.
pls help with the issue.
P.S - I'm able to start weblogic server from base_domain but not from Sapphire domain which i created during installation of reports 11g.
I need a way to start the Weblogic server from Sapphire Domain and also start reports server and access the reports url.

TemTesh wrote:
After machine shutdown without shutdown IAS server, Oracle application server report service can not restart.
below is the error
11/2/10 5:26 AM NfsServer: (TCP:Nfs-6) Exception
oracle.ifs.common.IfsException: IFS-71002: I/O error.
java.net.SocketException: Connection resetAnd this seems to be the problem. Missing NFS share? TCP=<i>transmission control protocol</i>. NFS=<i>network file server</i>.
For some reason (very like due to how it has been configured), the s/w attempts to use a NFS share - and uses the TCP wire protocol. This NFS share is not mounted or not available.
Check the NFS server (it needs to be up and exporting that share), there has to be network connectivity between the report server and the NFS server, and the report server needs to have the required config and access permissions for mounting that NFS share.

Servlet calls to Oracle Report Server

I have an app server (oracle 9ias) which will be available to
the public.
However, I also have an oracle report server that produces pdf
reports from an rdf template but the server will not be
available to the public.
How can I use JSP,java servlets or other means to access the
report server from via the app server and generate the pdf
reports to the clients browser, bearing in mind that the client
has no direct access to the oracle report server?

In your JSP or servlet you can make a URLConnection to the
reports server, passing all appropiate paramters across in the
URL ex/ http://reports_server/reportApplication/rwcgi60.exe?
DESFORMAT=pdf&DESTYPE=FILE&DESNAME=outputname&server=servername&p
aram1=...&param2=... etc. you can place all the report
parameters and values and all the Oracle Report specific
paramters on the URL in the above format. After you open the
java.net.URLConnection with the appropiate connection, the
report is submitted, you can then get any error streams, or
codes from the URLConnection API.
Jeff

Unable to start Oracle Reports Server for 10g version 10.1.2.3.0

Attention Oracle Reports Team or anyone else:
I am unable to start the Oracle Reports Server for 10g version 10.1.2.3.0 of the Application Server.
I have included the trace files see below. I marked the text in bold that might indicate the issues.
Any help will be greatly appreciated. Thank you.
Reports engine rwEng trace file:+
[2010/7/8 10:11:51:626] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[1]=server=myreportserver
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[5]=tracefile=/myoraclehomepath/reports/logs/rwEng-0.trc
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_append
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[7]=cacheDir=/myoraclehomepath/reports/cache
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[8]=server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:51:678] Info 50128 (RWEngine:init): orb init succeeded
[2010/7/8 10:11:52:108] Info 55007 (EngineImpl:loadLibrary): Load librw.so succeeded
[2010/7/8 10:11:52:108] Debug 50103 (EngineImpl:init): useDataCache = null
[2010/7/8 10:11:52:108] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = myreportserver
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = /myoraclehomepath/reports/cache
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = /myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_append
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null
[2010/7/8 10:11:52:117] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
[2010/7/8 10:11:52:117] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null
*[2010/7/8 10:11:58:329] Error 50103 (C Engine): 10:11:58 ERR REP-3000: Internal error starting Oracle Toolkit.*
*[2010/7/8 10:11:58:329] Error 50103 (C Engine): 10:11:58 ERR REP-3000: Internal error starting Oracle Toolkit.*
[2010/7/8 10:11:58:330] (C Engine)
[2010/7/8 10:11:58:330] (C Engine)
               | Reports Builder Profiler statistics |
[2010/7/8 10:11:58:330] (C Engine)
[2010/7/8 10:11:58:330] (C Engine)
TOTAL ELAPSED Time: 6.06 seconds
[2010/7/8 10:11:58:331] (C Engine)
Reports Time: 6.06 seconds
[2010/7/8 10:11:58:331] (C Engine) (100.00% of TOTAL)
[2010/7/8 10:11:58:331] (C Engine)
ORACLE Time: 0.00 seconds
[2010/7/8 10:11:58:331] (C Engine) ( 0.00% of TOTAL)
[2010/7/8 10:11:58:331] (C Engine)
UPI: 0.00 seconds
[2010/7/8 10:11:58:332] (C Engine)
SQL: 0.00 seconds
[2010/7/8 10:11:58:332] (C Engine)
TOTAL CPU Time used by process: 1.08 seconds
[2010/7/8 10:11:58:340] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 3000
[2010/7/8 10:11:59:129] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[1]=server=myreportserver
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[5]=tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_append
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[7]=cacheDir=/myoraclehomepath/reports/cache
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[8]=server_ior="/tmp/myreportserver_xxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:59:179] Info 50128 (RWEngine:init): orb init succeeded
[2010/7/8 10:11:59:593] Info 55007 (EngineImpl:loadLibrary): Load librw.so succeeded
[2010/7/8 10:11:59:593] Debug 50103 (EngineImpl:init): useDataCache = null
[2010/7/8 10:11:59:594] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
[2010/7/8 10:11:59:597] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = myreportserver
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = /myoraclehomepath/reports/cache
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = /myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_append
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
[2010/7/8 10:11:59:600] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null
*[2010/7/8 10:12:5:757] Error 50103 (C Engine): 10:12:05 ERR REP-3000: Internal error starting Oracle Toolkit.*
*[2010/7/8 10:12:5:758] Error 50103 (C Engine): 10:12:05 ERR REP-3000: Internal error starting Oracle Toolkit.*
[2010/7/8 10:12:5:758] (C Engine)
[2010/7/8 10:12:5:758] (C Engine)
               | Reports Builder Profiler statistics |
[2010/7/8 10:12:5:758] (C Engine)
[2010/7/8 10:12:5:759] (C Engine)
TOTAL ELAPSED Time: 6.06 seconds
[2010/7/8 10:12:5:759] (C Engine)
Reports Time: 6.06 seconds
[2010/7/8 10:12:5:759] (C Engine) (100.00% of TOTAL)
[2010/7/8 10:12:5:759] (C Engine)
ORACLE Time: 0.00 seconds
[2010/7/8 10:12:5:760] (C Engine) ( 0.00% of TOTAL)
[2010/7/8 10:12:5:760] (C Engine)
UPI: 0.00 seconds
[2010/7/8 10:12:5:760] (C Engine)
SQL: 0.00 seconds
[2010/7/8 10:12:5:760] (C Engine)
TOTAL CPU Time used by process: 1.01 seconds
[2010/7/8 10:12:5:769] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 3000
[2010/7/8 10:12:6:475] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0
[2010/7/8 10:12:6:475] Debug 50103 (RWEngine:init): args[1]=server=myreportserver
[2010/7/8 10:12:6:475] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[5]=tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_append
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[7]=cacheDir=/myoraclehomepath/reports/cache
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[8]=server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:12:6:523] Info 50128 (RWEngine:init): orb init succeeded
[2010/7/8 10:12:6:942] Info 55007 (EngineImpl:loadLibrary): Load librw.so succeeded
[2010/7/8 10:12:6:942] Debug 50103 (EngineImpl:init): useDataCache = null
[2010/7/8 10:12:6:942] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = myreportserver
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = /myoraclehomepath/reports/cache
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = /myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_append
[2010/7/8 10:12:6:948] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null
[2010/7/8 10:12:6:948] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
[2010/7/8 10:12:6:948] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null
*[2010/7/8 10:12:13:91] Error 50103 (C Engine): 10:12:13 ERR REP-3000: Internal error starting Oracle Toolkit.*
*[2010/7/8 10:12:13:91] Error 50103 (C Engine): 10:12:13 ERR REP-3000: Internal error starting Oracle Toolkit.*
[2010/7/8 10:12:13:91] (C Engine)
[2010/7/8 10:12:13:92] (C Engine)
               | Reports Builder Profiler statistics |
[2010/7/8 10:12:13:92] (C Engine)
[2010/7/8 10:12:13:92] (C Engine)
TOTAL ELAPSED Time: 6.05 seconds
[2010/7/8 10:12:13:92] (C Engine)
Reports Time: 6.05 seconds
[2010/7/8 10:12:13:92] (C Engine) (100.00% of TOTAL)
[2010/7/8 10:12:13:93] (C Engine)
ORACLE Time: 0.00 seconds
[2010/7/8 10:12:13:93] (C Engine) ( 0.00% of TOTAL)
[2010/7/8 10:12:13:93] (C Engine)
UPI: 0.00 seconds
[2010/7/8 10:12:13:93] (C Engine)
SQL: 0.00 seconds
[2010/7/8 10:12:13:93] (C Engine)
TOTAL CPU Time used by process: 1.02 seconds
*[2010/7/8 10:12:13:102] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 3000*
reports engine rwURLEng trace file:+
*** 2010/7/8 10:11:47:306 -- Reading server config file /myoraclehomepath/reports/conf/myreportserver.conf
*** 2010/7/8 10:11:47:307 -- <server version="10.1.2.3.0">
<cache class="oracle.reports.cache.RWCache">
<property name="cacheSize" value="50"/>



</cache>


<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="30" callbackTimeOut="90000">


</engine>
<engine id="rwURLEng" class="oracle.reports.urlengine.URLEngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="30" callbackTimeOut="90000"/>


<destination destype="ftp" class="oracle.reports.plugin.destination.ftp.DesFTP">

</destination>
<destination destype="WebDav" class="oracle.reports.plugin.destination.webdav.DesWebDAV">

</destination>


<job jobType="report" engineId="rwEng" securityId="rwSec"/>
<job jobType="rwurl" engineId="rwURLEng" securityId="rwSec"/>
<notification id="mailNotify" class="oracle.reports.server.MailNotify">
<property name="succnotefile" value="succnote.txt"/>
<property name="failnotefile" value="failnote.txt"/>
</notification>

<log option="noJob"/>

<trace traceOpts="trace_all" traceMode="trace_append"/>
<connection maxConnect="20" idleTimeOut="15">
<orbClient id="RWClient" publicKeyFile="clientpub.key"/>
</connection>
<queue maxQueueSize="1000"/>




<pluginParam name="xmlpds" type="file">xmlpds.conf</pluginParam>
<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>
<pluginParam name="textpds" type="file">textpds.conf</pluginParam>
</server>
*** 2010/7/8 10:11:47:308 -- Reports Server is starting up
*** 2010/7/8 10:11:51:982 -- Reports Server started up engine rwURLEng-0
*** *2010/7/8 10:12:13:175 -- Shutting down engine rwURLEng-0*
*** *2010/7/8 10:12:13:177 -- Reports Server shut down engine rwURLEng-0*
*** 2010/7/8 10:12:13:178 -- Server is shutting down
Why does the rwURLEng engine start up and then immediately shut down?+
reports server trace file:+
[2010/7/8 10:11:47:276] Debug 50103 (EnvironmentUtility:getEnvironment): XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): DEBUG_SLFIND=/myapppath/log/mydebuglogfile.log
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): DISPLAY=myhostname:0.0
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): LD_LIBRARY_PATH=/myoraclehomepath/jdk/jre/lib/sparc:/myoraclehomepath/lib:/myoraclehomepath/opmn/lib:/myoraclehomepath/lib32
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): ORACLE_CONFIG_HOME=/myoraclehomepath
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): ORA_NLS33=/myoraclehomepath/ocommon/nls/admin/data
[2010/7/8 10:11:47:283] Debug 50103 (EnvironmentUtility:getEnvironment): PATH=/myoraclehomepath/jdk/bin:/myoraclehomepath/bin:/myoraclehomepath/jdk/bin:/myoraclehomepath/bin:/myoraclehomepath/dcm/bin:/myoraclehomepath/bin:/myoraclehomepath/Apache/Apache/bin:/myoraclehomepath/opmn/bin:/myoraclehomepath/dcm/bin:/bin:/usr/bin:/etc:/usr/ccs/bin:/usr/local/bin:/usr/ucb:/usr/sbin:/export/home/oracle:/usr/bin:/bin
[2010/7/8 10:11:47:283] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_CLASSPATH=/myoraclehomepath/reports/jlib/rwbuilder.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar:/myoraclehomepath/j2ee/home/oc4j.jar:/myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/oraclebarcode.jar
[2010/7/8 10:11:47:283] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_DEFAULT_DISPLAY=NO
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_NO_DUMMY_PRINTER=TRUE
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_PATH=/myapppath/bin:/myapppath/util/bin:/myoraclehomepath/guicommon/tk/admin/TTF:/myoraclehomepath/reports/templates:/myoraclehomepath/reports/samples/demo:/myoraclehomepath/reports/integ:/myoraclehomepath/reports/printers
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_TAGLIB_URI=/WEB-INF/lib/reports_tld.jar
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_TMP=/tmp
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): RW=/myoraclehomepath/reports
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): SHELL=/usr/bin/ksh
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TK_DEBUG_POSTSCRIPT=Func/L/Mem
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TK_ICON=/myoraclehomepath/reports/plugins/resource
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TMP=/tmp
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TNS_ADMIN=/myapppath
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): TZ=US/Eastern
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): X_LD_LIBRARY_PATH_64=/myoraclehomepath/lib
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_TMP=/tmp
[2010/7/8 10:11:47:308] Info 56025 (RWServer:startServer): Reports Server is starting up
[2010/7/8 10:11:47:503] Debug 50103 (JobManager:start): Using Maximum Job Retry value = 0
[2010/7/8 10:11:47:526] Info 65000 (Multicast:init): Communication channel initialized
[2010/7/8 10:11:47:528] Debug 50103 (Multicast:registerReceiver): Packet handler registered
[2010/7/8 10:11:47:529] Info 50103 (ServerPacketHandler:start): ServerPacketHandler started successfully
[2010/7/8 10:11:47:532] Info 50103 (RWServer:startServer): Using multicast mechanism
[2010/7/8 10:11:47:562] Debug 50103 (ServerPacketReceiver:handleRequestPacket): Received packets. Multicast is working
[2010/7/8 10:11:48:561] Debug 50103 (ServerPacketReceiver:handleRequestPacket): Received packets. Multicast is working
[2010/7/8 10:11:49:572] Debug 50103 (ServerPacketReceiver:handleRequestPacket): Received packets. Multicast is working
[2010/7/8 10:11:50:589] Info 56023 (ServerImpl:ServerImpl): Idle thread has been started
[2010/7/8 10:11:50:691] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
[2010/7/8 10:11:50:691] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:11:51:56] Info 50103 (RWLocaleUtility:RWLocaleUtility): Using oracle.i18n.util.LocaleMapper class
[2010/7/8 10:11:51:58] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:51:95] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
[2010/7/8 10:11:51:95] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
[2010/7/8 10:11:51:97] Info 56020 (EngineManager:spawnEngine): Launching engine rwURLEng-0
[2010/7/8 10:11:51:98] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:11:51:99] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwURLEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.urlengine.URLEngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwURLEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:51:129] Info 56021 (EngineManager:spawnEngine): Engine rwURLEng-0 has been launched
[2010/7/8 10:11:51:129] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Initial
[2010/7/8 10:11:51:131] Debug 50103 (JobStore:writePersistFile): Purge persistent file
[2010/7/8 10:11:51:169] Debug 50103 (JobStore:writePersistFile): Purge persistent file done
*[2010/7/8 10:11:51:981] Warning 50103 (EngineManager:registerEngine): REP-55103: API URLEngine:getEngineEnvs not applicable to URL engine*
[2010/7/8 10:11:51:982] Info 56026 (EngineManager:registerEngine): Reports Server started up engine rwURLEng-0
[2010/7/8 10:11:51:998] Debug 50103 (EngineManager:updateEngineState): Engine rwURLEng-0 status is 1
[2010/7/8 10:11:51:998] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Ready
[2010/7/8 10:11:58:490] Info 50103 (EngineManager:manage): Engine restart count: 1
[2010/7/8 10:11:58:590] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
[2010/7/8 10:11:58:590] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:11:58:592] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:58:623] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
[2010/7/8 10:11:58:624] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
[2010/7/8 10:12:5:832] Info 50103 (EngineManager:manage): Engine restart count: 2
[2010/7/8 10:12:5:932] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
[2010/7/8 10:12:5:934] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:12:5:935] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:12:5:963] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
[2010/7/8 10:12:5:964] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
*[2010/7/8 10:12:13:174] Exception 56105 (): Engine rwEng-0 died with error:*
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
     at oracle.reports.utility.Utility.newRWException(Utility.java:758)
     at oracle.reports.server.EngineManager.manage(EngineManager.java:367)
     at oracle.reports.server.IdleThread.run(IdleThread.java:88)
*[2010/7/8 10:12:13:175] Info 56029 (EngineManager:shutdownEngine): Shutting down engine rwURLEng-0*
[2010/7/8 10:12:13:176] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Shutdown
[2010/7/8 10:12:13:177] Info 56047 (EngineManager:remove): Reports Server shut down engine rwURLEng-0
[2010/7/8 10:12:13:177] Info 50103 (ServerPacketHandler:stop): Multicastmanager stopped successfully
[2010/7/8 10:12:13:178] Info 50002 (RWServer:shutdown): Server is shutting down
[2010/7/8 10:12:13:178] Info 50103 (RWServer:startServer): Notify thread to exit
Why does the trace file indicate that the rwEng engine died with error?+
Again why does the rwURLEng engine start up and then immediately shut down?+
Thank you for your help on this issue.+

OK, I did this once and did not follow the oracle docs
If you saved your targets.xml before you started you might save it by renaming it back.
(Double check to make sure you did not miss a rename)
Otherwise, all I have to offer is my rough notes:
1. Backup the file $ORACLE_HOME/sysman/emd/targets.xml.
[oracle@ias02 emd]$ pwd
/u01/app/oracle/product/midtier/sysman/emd
cp targets.xml targets.xmlbackup
2. Modify the file targets.xml by changing all the occurrences of the wrong reports server name by the correct one.
i.e. Replace rep_test_midtier with rep_new (4 places - changes)
Copy the conf file as follows: ( this will named different from system to system )
cp /u01/app/oracle/product/midtier/reports/conf/rep_pia_oracleas.conf /u01/app/oracle/product/midtier/reports/conf/rep_fam.conf
run this script:
/u01/app/oracle/product/midtier/bin/addNewServerTarget.sh rep_fam          (change rep_fam to new report server name)
3.Update the changed configuration .
/u01/app/oracle/product/midtier/dcm/bin/dcmctl updateconfig -ct opmn -v -d
/u01/app/oracle/product/midtier/dcm/bin/dcmctl resyncinstance -v -d
4. Restart the Application Server Control Console
/u01/app/oracle/product/midtier/bin/emctl stop iasconsole
/u01/app/oracle/product/midtier/bin/emctl start iasconsole
In the file:
/u01/app/oracle/product/midtier/reports/config/reportsConfig.properties
Change the Reports_Server_Name setting from rep_test_midtier to rep_fam (change rep_fam to new report server name)
Best Wishes (I was able to save mime)
The other option is to reinstall

Oracle Mobile Server with SQLLite/Berkeley Db and dbsql

Hi all,
i am not sure if i am correct here but hopefully i am.
In the past we have had Oracle Mobile Server with Oracle Lite.
We decided to switch to new mobile Server because oracle webtogo is not longer supported and incompatible with windows 7. My administrator did migration of mobile server but migration utility reported that the available applications are incompatible.
So I decided to create a completely New Publication with a Java application. The new Publication contains only one publication Item. For the first tests I simply wanted to spool out the data contained in my local database.
In bin directory of sqlite folder i can find a utility named "dbsql". I understood it in this way that I can attach to an existing database file and take a look into that database.
If i call dbsql.exe BerkeleyTest all seems to be ok. But if i try to select some data from that file i only get the errormessage that databse is in wrong format or encrypted. What am i doing wrong there?
Am I right that the sql interface (I need that interface because I dont want to rewrite dataaccesslayer of my app) is only available in sqlite but not on "BerkeleyDb"?
Is anyone here to help me a little bit with my problem here?
Regards!
Martin

I do not know much about Oracle Mobile Server with Oracle Lite, does it use SQLite or BDB? I do know that databases created by SQLite cannot be read by Berkeley DB SQL (of which dbsql.exe is part of), and databases created by Berkeley DB SQL cannot be read by SQLite. Also, databases created by Berkeley DB outside of the SQL API cannot be read by the BDB SQL API. You can open BDB SQL databases with BDB outside of the SQL API, but I would not recommend that outside of a few BDB utilities described in the documentation. So if your BerkeleyTest database was created by SQLite or BDB outside of the SQL API, then it makes sense that dbsql.exe is returning an error when trying to read it.
Calling dbsql.exe BerkeleyTest does not open the database, that happens when the first operation is performed on it, which is why you did not get an error until you tried to select something.
Lauren Foutz

Please help ! "Oracle Reports Server CGI - Reports Server name is not specified."

Hello Gurus,
I have an html form that allows putting in a parameter. Upon
submit the form, it'll pass a string URL with the parameter to a
new browser.
My url: http://localhost/servlet/oracle.reports.rwcgi.RWServlet?
diary&14252
I also used keymap looks like this
diary: report=Diary.rdf server=servername desformat=pdf
destype=cache userid=id/psswd@db myoid=%1 %*
But I get an Error: The requested URL was not found, or cannot
be served at this time. Oracle Reports Server CGI - Reports
Server name is not specified.
However, if I move the cursor to the end of the same url (or put
a space at the end) and hit Enter, then the report is
displayed. I guess there must be something wrong with my
configuration. Please help. I appreciated any inputs from you.
Thanks in advance.
Ashley

I found the solution to my problem. It was nothing to do with
the cgicmd.dat keymap file, but the html form itself. It's
confused between the url arguments and form arguments from the
submit button. So, what I did was open a new window with all
arguments instead of using the submit function.
Regards,
Ashley

Oracle Report Server wierd problem

Hi All,
I am facing very wierd problem with oracle report server.
I am using Oracle Report Server 10g R1. The problem I am facing is as under:
There is custom parameter form where user enters report filter criteria and press a button to create the report.
The problem is that report is giving output some times and sometimes it gives no output at all. Both the times, the parameters passed by user are same. The report executions are done for both runs one after other. We have tried to look in report server trace file but could not find anything. When report server fails to give any data in the report, at the same time, we have tried to execute the report query on SQL prompt and it did return data.
Can any one give any hint where the problem could be ?
Thanks,
Ramchandra Jetwani

Hi,
When i used to get only one page the options like facing, continuous facing are disabled. And displays only single page.
These options are enabled only when there are multiple pages in pdf.
One more thing i found that it happens when I first view the report as pdf it displays
all the pages, then i change the display format to csv and again when i change
the format to pdf the problem starts.
And when I will restart the report server service, it works fine again until i wont view it in CSV format.
Message was edited by:
Yogesh

Oracle Apps Report error "Oracle Reports Server CGI - The Reports Server Engine terminated abnormally."

Hi ,
I have modified layout of one existing custom report.
I have added 3 columns in the report , Now when I execute the report sometimes it gets executed with the newly added columns and sometimes it errors out with below error.
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - The Reports Server Engine terminated abnormally.
Any pointers in this regards will be appreciated.
Thanks

I found there were some srw.message statement ( used for debugging purpose) were there , when I removed those statements. This error was gone.

Oracle Reports Server: From 10.1.2.0.2 to 10.1.2.2

Hi,
We are looking to change our Oracle Reports Server from version 10.1.2.0.2 to 10.1.2.2
Reason for change: To apply the patch for Bug 5739424
What will be the impact? On reports, report invocation, report generation etc.
Please give a brief description
Your inputs will be appreciated
Thanks,
Krrish

Hi,
Any suggestions?
I am waiting for your replies...
Please update with your valuable inputs

Reports Server Process gets crashed in 10.1.2.3.0

Hi,
We have 5 standalone production reports servers (10.1.2.3) load balanced through netscalar. We observed that the reports server process gets crashed intermittently which kills the reports jobs in the queue. Error as below is seen in the ipm.log under $ORACLE_HOME/opmn
08/08/12 10:38:21 [4] Process Crashed: rep_brnors05_frs_standalone~ReportsServer~rep_brnors05_frs_standalone~1 (498925945:6108) - Restarting
08/08/12 10:38:27 [4] Starting Process: rep_brnors05_frs_standalone~ReportsServer~rep_brnors05_frs_standalone~1 (498925946:0)
08/08/12 10:38:34 [4] Process Alive: rep_brnors05_frs_standalone~ReportsServer~rep_brnors05_frs_standalone~1 (498925946:2836)
Any idea wat could be causing the problem.. any configuration changes that need to be done like to set or increase some timeout parameters in the rep_server.conf, etc. Each time process crash is for exact 6 secs. It clears the failed jobs queue during this time. Do not see any jobs starting or ending during these 6 seconds.
Reports server version - 10.1.2.3.0
Platform - Windows
Report server type - Standalone
(Affecting our production environment ... Any suggestions, workarounds are highly appreciated)

Michael,
Below is the file change. When we set it to 'true' Viewer performed correctly.
Jerre
=====
2. Then a new configuration parameter "passNullParameterAsNull" needs to be set in configuration.xml under <viewer section with default value as false and which is an optional one. Usage :
<viewer queryRefreshPeriod="3000" queryRequestTimeout="1000" longRequestRefreshPeriod="6000" longRequestTimeout="10000" userDefinedConnections="true" passNullParameterAsNull="true" logLevel="debug" laf="dc_blaf" pageNavigation="true" switchWorksheetBehavior="prompt" defaultLocale="en" disableBrowserCaching="false" enableAppsSSOConnection="false">
When passNullParameterAsNull="false" , that means, when null is passed as parameter from one sheet to another during drill to link, the value will be converted in between to the value which is set as "ShowNullValueAs" in second sheet. eg: if ShowNullValueAs = "" in second sheet. Null value passed from first sheet will reach as value "" in second sheet. If passNullParameterAsNull="true", then Null value will always be passed as Null to second sheet irrespective of the value of "ShowNullValueAs" in second sheet.
=====

Can I use Oracle Report Server to print from APEX? How?

Hello, we have Oracle Application server, Oracle Report server and now we just installed APEX and doing a pilot project. Since we don't have BI Publisher, how can we use our Oracle Report server to print from apex report? Can it be done and if yes where can I get some detail info that I can share with our DBA?
I have in past asked questions about the printing issues but I have been refered to http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html#01 section 5 which talks about another installation.
Thanks so very much for any info.
-iahmadi

You can use FOP, but the formatting of the xsl (Xml Style Sheets) takes a little work. If you have the Oracle Reports server up and access to the development product, why not go that route?
You want the filtering and sorting and searching, yes, but then you also want to print them out.. Then you would probably be best looking at replacing the Oracle Reports setup with BI Publisher. You can convert Most your reports over to bi publisher layouts easily.. (I have heard of some reports that do require recreating in Bi Publisher from Oracle Reports..)
Then you can have your Apex Reports and call Bi Publisher from APEX and everyone wins..
Is your Oracle Reports stuff used by non-APEX applications, that could be modified to use Bi Publisher?
Thank you,
Tony Miller
Webster, TX

Oracle report server problem

Hi all
I install oracle application server 10gR2 on THREE servers (windows server 2003)
all the servers on the same doman.
so that means I have three oracle report server on the network.
but when I run the following command (rwdiag -findAll)on one of the servers, it gives me just two oracle report server exist on the network the third on is missing despite that it is up.
And when I execute the same command (rwdiag -findAll) on the same server which contains the report server which I have problem with, it gives me that it is on the network.
by.
Edited by: user1089169 on Apr 15, 2013 11:47 AM

Reports
this is the report-forum. there are the report gurus, which can help you

Oracle Report Server with Weblogic crash

Similar Messages

Maybe you are looking for