Oracle upgradation patch

hi,
I have downloaded not purchased Oracle 10gR (10.2.0.1) from official Oracle site for FileNet 4.0. but the issue is that FileNet recomends 10.2.0.2. becoz of this our integration of FileNet with Oracle is not successful...what we need to do is to apply an upgradation patch i.e upgrade from 10.2.0.1 to 10.2.0.2. My question is whether these patches available free from cost without purchasing licence...if yes then from where...the link...

Sadly, the Personal Edition is only available on
Windows OS.Ah, yes, correct. I was a bit hasty there.
Editions, including Personal Edition, are layed out in the Licensing Information guide.
I have not done (or will do) such an excavation, but I wonder how Oracle would consider licensing PE for use on other platforms? (i.e. use of "plain" EE install)

Similar Messages

Oracle Upgrade / Patching

I've been asked to look into this area from my DBA especially with regards our EP6 which is running oracle 9i. I just can't find reference to it in the mindfield known as sapnet, can anybody point me in the right direction ie is Oracle 10.2.04 ok for EP6 and is the critical patching fine using Oracle's methods.
As part of a review of the applications we are currently hosting, it is likely that we will be implementing a program of applying Oracleu2019s quarterly critical patch updates. To ease the task, we would also be looking to get all databases up to the current release of 10 (10.2.0.4), then to apply the critical patch sets as they are issued by Oracle. Initially the plan is to apply the minus 1 release to test for at least a month before applying to production. In short, do you support such a policy, or does this in some way invalidate the support agreement?
Thanks
Ian

Hi Ian,
Yes Oracle 10.2 is recommended.
Cheers
Deepanshu

Oracle Apex patch number to upgrade from Apex 4.0.2 to 4.1

We have Apex 4.0.2
We wanted to upgrade 4.1
What is upgrade patch number for this upgrade so we can download from metalink

Hello,
as far as i know there is no patch to upgrade from 4.0.2 to 4.1.
Just download the full 4.1 from http://www.oracle.com/technetwork/developer-tools/apex/downloads/index.html
Regards,
Dirk

Apply Oracle Receivables Patch after Upgrade 5753621

Hi,
After upgrading the Oracle Apps 11.5.10.2 database to 10.2.0.3.....
do we required to apply this patch..Oracle Receivables patch...5753621..

From Patch 5753621 README file:
Abstract: ONE-OFF REQUEST ON TOP OF 11.5.9 CU2 FOR BUG 5525015
Description: Enabled Histogram for complete_flag in ra_customer_trx_all table
Patch Size: 4.8K
I have applied this patch last time I did an upgrade to 10.2.0.3 with no issues at all. The patch would create a histogram on ra_customer_trx_all.complete_flag and gather the table stats then, nothing more.

Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]

Hi Deepak/Folks,
Another question that I have is that while doing the Oracle Upgrade on an EP server, the patches were not installed properly and I had to shut down the Patches installation after it did not do anything for a while.
Now when I try to install the patches it fails telling me that the Installed patches cannot be verified, I had written to SAP and they told me to follow the
SAP note 1862446 - Inventory
load failed... OPatch cannot load inventory for the given Oracle Home
and re-create the oracle inventory.
This has also not helped in anyway.
Is there a solution to this problem.
Following is the error that I am getting when I try to Install the patches
Getting pre-run patch inventory...
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory.
Refer to log file
$ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-14-52-51.log
when I open the log file specified here I get the following
more mopatch-2014_08_06-14-52-51.log
more /oracle/<SID>/11203/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
MOPatch - Install Multiple Oracle Patches in One Run - 2.1.15.
Copyright (c) 2007, 2013, Oracle and/or its affiliates. All rights reserved.
Version:       2.1.15
Revision:      5.1.2.26
Command-line: /oracle/<SID>/11203/MOPatch/mopatch.sh -v -s SAP11203P_1312-20009978.zip
Oracle Home:   /oracle/<SID>/11203
RDBMS version: 11.2.0.3.0
OPatch version:11.2.0.3.3
Clean-up:      supported
PSUs:          supported
Log file:      $ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
Patch base:    .
Patch source: SAP11203P_1312-20009978.zip
Link script:   ./link.mts<SID>ua.sh
Readmes:       <none>
Strpd. Readmes:<none>
make utility: /usr/ccs/bin/make
unzip utility: /oracle/<SID>/11203/bin/unzip
User name:     ora<SID>
Working dir:   /oracle/stage
System:        HP-UX mts<SID>ua B.11.31 U ia64 2468369872 unlimited-user license
Disk free:     11734549 KBytes on /oracle/<SID>
Disk required: 886496 KBytes on /oracle/<SID>
Getting pre-run patch inventory...
executing: "/oracle/<SID>/11203/OPatch/opatch" lsinventory -retry 0 -xml "./mopatch-187-21696-tmpdir/preinv.xml"
========================================================
GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
========================================================
Oracle Interim Patch Installer version 11.2.0.3.3
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home       : /oracle/<SID>/11203
Central Inventory : /oracle/<SID>/oraInventory
   from           : /oracle/<SID>/11203/oraInst.loc
OPatch version    : 11.2.0.3.3
OUI version       : 11.2.0.3.0
Log file location : /oracle/<SID>/11203/cfgtoollogs/opatch/opatch2014-08-06_15-01-56PM_1.log
List of Homes on this system:
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
Possible causes are:
   Oracle Home dir. path does not exist in Central Inventory
   Oracle Home is a symbolic link
   Oracle Home inventory is corrupted
LsInventorySession failed: OracleHomeInventory gets null oracleHomeInfo
OPatch failed with error code 73
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory. Exiting.
I would appreciate if you folks can help me out on this
Thanks
APS

FOLLOW UP QUESTION BRANCHED:
Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]

9.0.2.6 Portal Repository Upgrade Patch problems.

We got some problem with Portal when tryed to apply
9.0.2.6 Upgrade. Could anybody give advice on this issue:
Initial configuration:
Solaris8, Portal 9.0.2.2.14, Oracle 9iAS R2 v.9.0.2.0, RDBMS 9.0.1.3. The infrastructure and midtier work on different SPARC-servers.
Accordingly upgrade procedure we succesfully applied:
a) Infrastructure: 9.0.1.4 Patchset for Oracle RDBMS server, 9.0.2.2 Patchset for OID, Oracle 9iAS SSO-server
migration to 9.0.2.5, 9.0.2.2 Patchset for 9iAS Core.
b) 9.0.1.4 Patchset for Oracle RDBMS server, 9.0.2.2 Patchset for OID, Oracle 9iAS SSO-server migration to 9.0.2.5, 9.0.2.2 Patchset for 9iAS Core, Portal 9.0.2.6
patch.
After this we needed to make just one last step:
Portal 9.0.2.6 Repository Upgrade Patch (2981297) for
changing Portal's repository schemes. It worked but
like a result we got the next errors after patch upgrade
was done:
a) "The following invalid non-Portal objects exist in the Portal Schema: INDEX ABC (the name of portal object), PACKAGE BODY WWMON_REP_REPOSITORY, PACKAGE BODY WWMON_REP_REPOSIT_DTL, PLS-00103: Encountered the symbol "," when expecting one of the following: (-+case mod not null <an identifier>,...) The symbol "null" was substituted for "," to continue.)" See upgtmp/nonportal.log
b) "ERROR: 1 invalid objects remain; ERROR: Failed while updating the new portlet IDS..."
c) "ERROR: ORA-01407: cannot update ("PORTAL"."WWSBR_URL$"."URL") to NULL.
d) Two package body of packages at PORTAL scheme became invalid: WWMON_REP_REPOSITORY, WWMON_REP_REPOSIT_DTL. About 20 package body of packages at PORTAL_DEMO became invalid (It seems like initial portlet ID's disappeared
and except of pportlet_id there is nothing:
Example:
inital statement at body:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
PORTAL.wwpro_api_invalidation.invalidate_cache(
p_provider_id => p_provider_id,
p_portletid => 1065753336,
p_instance_id => p_reference_path,
p_subscriber_id => PORTAL.wwctx_api.get_subscriber_id ,
p_user => PORTAL.wwctx_api.get_user);
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
after upgrade repository patch:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
PORTAL.wwpro_api_invalidation.invalidate_cache(
p_provider_id => p_provider_id,
p_portletid => ,
p_instance_id => p_reference_path,
p_subscriber_id => PORTAL.wwctx_api.get_subscriber_id ,
p_user => PORTAL.wwctx_api.get_user);
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Like a result after 9.0.2.6 Portal Repository Upgrade Patch application we lost the possibility to edit user's
profiles at Portal and other nesessary features. It seems
like some portlet ID's just dissapeared from Portal scheme. Could anybody had the same problem with Portal Upgrade 9.0.2.6? Quite possible that we missed some important element at during upgrade but ,really, we didn't wait so unlucky result. Advice something, please...
Regards. Igor.

Igor,
Since you've encountered undocumented errors, your repository upgrade has failed. You'll want to leave the repository as is for troublshooting, if at all possible, and log a TAR with support if you haven't already. They'll ask you to upload your upgrade log file and your upgrade tmp directory.
Regards

Are Oracle-Validated patches available in OEL 6?????????????

I have a plan to install OEL 6 and Oracle EBS R12 in my Server. But I need to make sure all Oracle-validated patches available in OEL 6 & I can install EBS R12 in OEL 6 properly....I had seen a mail in OTN which mentioned there is no RPMs available for OEL6 till now....
Please tell me a good Suggestion.
Arun Kurungatt

user13680387 wrote:
I have a plan to install OEL 6 and Oracle EBS R12 in my Server. But I need to make sure all Oracle-validated patches available in OEL 6 & I can install EBS R12 in OEL 6 properly....I had seen a mail in OTN which mentioned there is no RPMs available for OEL6 till now....
Please tell me a good Suggestion. OEL6 is not yet certified with Oracle Apps 11i/R12
Please refer to these docs for the list of certified Linux OS.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1]
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
Thanks,
Hussein

Oracle Upgrade -- Pre-Upgrade 10.2.0.4 to 11.2.0.1

Hello,
I want to do an Oracle Upgrade to version 11.2g!
At this point I did some things (in Windows Server 2003 X64):
1-) Install Oracle 10.2.0.1 (DVD Media);
2-) Installation of Oracle patchset 10.2.0.4 (note 871735);
3-) Installation of interim / last generics patch (note 1137346);
4-) Installation of SAP ECC 6.0 SR3 by SAPInst
5-) After SAP installation I did all the corrections in Oracle parameters as it mentioned in note 830576.
As you see above, all the SAP system was well installed!
But now I want to do the Oracle Upgrade process to the last version, Oracle DB 11.2g (11.2.0.1)... and so I´m following the Upgrade guide "Upgrade to Oracle Database 11g Release 2 (11.2) Windows.pdf" with some SAP notes for Upgrade process.
So I´m at this point in planning chapter where is recommended to check so things in actual database, one of this checks are running some SQL-scripts to perform an Oracle database upgrade with DBUA to release 11.2 (as mentioned in note 1431793 - Oracle 11.2.0: Upgrade Scripts)
I ran two Pre-Scripts, the @pre_upgrade_status.sql and @pre_upgrade_tasks.sql but both outputs showed some warnings and they are worrying me... so what I ask to you is some kind of help in analyse of them and tell me if this issues are relevant for the upgrading process and if so, what you recommend me to do to correct their!
Next I will post here this two log scripts... they are long!!!

PRE_UPGRADE_TASKS.log:
SQL> @pre_upgrade_tasks.sql
PRE-UPGRADE Tasks: === START ===
2010-08-05 18:24:13
Recompiling invalid objects
This reduces the number of invalid objects as much as possible.
COMP_TIMESTAMP UTLRP_BGN 2010-08-05 18:24:13
DOC>   The following PL/SQL block invokes UTL_RECOMP to recompile invalid
DOC>   objects in the database. Recompilation time is proportional to the
DOC>   number of invalid objects in the database, so this command may take
DOC>   a long time to execute on a database with a large number of invalid
DOC>   objects.
DOC>
DOC>   Use the following queries to track recompilation progress:
DOC>
DOC>   1. Query returning the number of invalid objects remaining. This
DOC>       number should decrease with time.
DOC>          SELECT COUNT(*) FROM obj$ WHERE status IN (4, 5, 6);
DOC>
DOC>   2. Query returning the number of objects compiled so far. This number
DOC>       should increase with time.
DOC>          SELECT COUNT(*) FROM UTL_RECOMP_COMPILED;
DOC>
DOC>   This script automatically chooses serial or parallel recompilation
DOC>   based on the number of CPUs available (parameter cpu_count) multiplied
DOC>   by the number of threads per CPU (parameter parallel_threads_per_cpu).
DOC>   On RAC, this number is added across all RAC nodes.
DOC>
DOC>   UTL_RECOMP uses DBMS_SCHEDULER to create jobs for parallel
DOC>   recompilation. Jobs are created without instance affinity so that they
DOC>   can migrate across RAC nodes. Use the following queries to verify
DOC>   whether UTL_RECOMP jobs are being created and run correctly:
DOC>
DOC>   1. Query showing jobs created by UTL_RECOMP
DOC>          SELECT job_name FROM dba_scheduler_jobs
DOC>          WHERE job_name like 'UTL_RECOMP_SLAVE_%';
DOC>
DOC>   2. Query showing UTL_RECOMP jobs that are running
DOC>          SELECT job_name FROM dba_scheduler_running_jobs
DOC>          WHERE job_name like 'UTL_RECOMP_SLAVE_%';
DOC>#
COMP_TIMESTAMP UTLRP_END 2010-08-05 18:24:15
DOC> The following query reports the number of objects that have compiled
DOC> with errors (objects that compile with errors have status set to 3 in
DOC> obj$). If the number is higher than expected, please examine the error
DOC> messages reported with each object (using SHOW ERRORS) to see if they
DOC> point to system misconfiguration or resource constraints that must be
DOC> fixed before attempting to recompile these objects.
DOC>#
                  0
DOC> The following query reports the number of errors caught during
DOC> recompilation. If this number is non-zero, please query the error
DOC> messages in the table UTL_RECOMP_ERRORS to see if any of these errors
DOC> are due to misconfiguration or resource constraints that must be
DOC> fixed before objects can compile successfully.
DOC>#
                          0
Purging Recyclebin
This reduces the time needed for upgrading the database.
Truncating SYS.AUD$
This reduces the time needed for upgrading the database.
Gathering Oracle Dictionary Statistics
This reduces the time needed for upgrading the database.
Running Pre-Upgrade-Information Tool utlu112i.sql
This is a mandatory task for manual database upgrades.
This tool is also run in pre_upgrade_status.sql.
Oracle Database 11.2 Pre-Upgrade Information Tool 08-05-2010 18:24:45
Script Version: 11.2.0.1.0 Build: 003
Database:
--> name:          PRD
--> version:       10.2.0.4.0
--> compatible:    10.2.0
--> blocksize:     8192
--> platform:      Microsoft Windows x86 64-bit
--> timezone file: V4
Tablespaces: [make adjustments in the current environment]
--> SYSTEM tablespace is adequate for the upgrade.
.... minimum required size: 905 MB
--> PSAPUNDO tablespace is adequate for the upgrade.
.... minimum required size: 84 MB
--> SYSAUX tablespace is adequate for the upgrade.
.... minimum required size: 210 MB
--> PSAPTEMP tablespace is adequate for the upgrade.
.... minimum required size: 61 MB
Flashback: OFF
Update Parameters: [Update Oracle Database 11.2 init.ora or spfile]
Note: Pre-upgrade tool was run on a lower version 64-bit database.
--> If Target Oracle is 32-Bit, refer here for Update Parameters:
-- No update parameter changes are required.
--> If Target Oracle is 64-Bit, refer here for Update Parameters:
WARNING: --> "shared_pool_size" needs to be increased to at least 472 MB
Renamed Parameters: [Update Oracle Database 11.2 init.ora or spfile]
-- No renamed parameters found. No changes are required.
Obsolete/Deprecated Parameters: [Update Oracle Database 11.2 init.ora or spfile]
--> remote_os_authent            11.1       DEPRECATED
--> background_dump_dest         11.1       DEPRECATED   replaced by "diagnostic_dest"
--> user_dump_dest               11.1       DEPRECATED   replaced by "diagnostic_dest"
Components: [The following database components will be upgraded or installed]
--> Oracle Catalog Views         [upgrade] VALID
--> Oracle Packages and Types    [upgrade] VALID
Miscellaneous Warnings
WARNING: --> Database is using a timezone file older than version 11.
.... After the release migration, it is recommended that DBMS_DST package
.... be used to upgrade the 10.2.0.4.0 database timezone version
.... to the latest version which comes with the new release.
Recommendations
Oracle recommends gathering dictionary statistics prior to
upgrading the database.
To gather dictionary statistics execute the following command
while connected as SYSDBA:
EXECUTE dbms_stats.gather_dictionary_stats;
Oracle recommends removing all hidden parameters prior to upgrading.
To view existing hidden parameters execute the following command
while connected AS SYSDBA:
SELECT name,description from SYS.V$PARAMETER WHERE name
        LIKE '\_%' ESCAPE '\'
Changes will need to be made in the init.ora or spfile.
Oracle recommends reviewing any defined events prior to upgrading.
To view existing non-default events execute the following commands
while connected AS SYSDBA:
Events:
SELECT (translate(value,chr(13)||chr(10),' ')) FROM sys.v$parameter2
      WHERE UPPER(name) ='EVENT' AND isdefault='FALSE'
Trace Events:
SELECT (translate(value,chr(13)||chr(10),' ')) from sys.v$parameter2
      WHERE UPPER(name) = '_TRACE_EVENTS' AND isdefault='FALSE'
Changes will need to be made in the init.ora or spfile.
PRE-UPGRADE Tasks: === FINISHED ===
SQL> spool off

Oracle upgrade 9.2.0.7.0 to 10.2.0.4

Hello All,
We have to do oracle upgrade from 9.2.0.7.0 to 10.2.0.4.
OS : AIX 5.3
Sap Version :- SAP R/3 Enterprise ;Release 620
Kernel relaese :- 640 patch level 221
Looking for Compatibility Document or notes.
Regards,
Rupal kankaney

Hi,
A number of note available for oracle upgrade from 9i to 10g :
Note 1151509 ORA-600[Kcbz_check_objd_typ_1] Upgrading from 9i to 10g
Note 830577 Oracle Database 10g: ORA-21700 when upgrading to 10.1/10.2
Note 819830 - Oracle Database 10g: Additional Information on upgrade:UNIX
Note 830576- Oracle Parameter Recommendation for Oracle 10g. And a lot of other notes on SMP.
Thanks
Sunny

Oracle Upgrade 10.2.0.2 to 11g

Hello,
We have planed to upgrade the database Oracle from 10.2.0.2 to 11g.
We are wondering wether there is a risk to upgrade directely to 11g from our current version.
Also, what are the important points to observe and what are the tests to do in SAP before upgrading ?
Many thanks in advance
Regards
Ben

Just follow the Oracle upgrade guides at
http://service.sap.com/instguides
--> Database Upgrades
--> Oracle
- read all the notes mentioned in the guide
- make sure you use a proper kernel and a proper instantclient
- make sure you apply not only the upgrade itself but also all PSU patches
- take a full backup of the system
I suggest to first upgrade a test and/or qa system and then do the production.
Markus

Oracle upgrade from 32-bit Oracle 9i to 64-bit Oracle 10g (Windows 2003 R2)

Hello Gurus,
Existing I have SAP R/3 4.7 200 Oracle 9i Windows 2003 32bit
I want to upgrade Hardware to x86 EMT64bit
I would like to upgrade to 64-bit Oracle 10G from 32-bit Oracle 9i. runs on Windows 2003 32bit. Target DB is Oracle 10G on x64 Windows (EMT64 hardware) on Windwos 2003R2 64bit. & Add Solution manager to new System
Please give me any advise which is the better way of upgrading Oracle 10g. Or better yet, please advise a safe way of upgrading to Oracle 10g from 9i
Please guide me about request shipping DVD For This Solution to my site
Many thank in advance
Kuekul

Hi
You can download Oracle 10g from service market place www.service.sap.com>downlaods>Installations and Upgrades-->
Installations and Upgrades - Entry by Application Group>SAP NetWeaver>SAP NetWeaver7.0>Installation and upgrade>windows server-->oracle check for below software and download it
EXE 51031678_1 ORACLE RDBMS 10.2 Windows 1 of 5
RAR 51031678_2 ORACLE RDBMS 10.2 Windows 2 of 5
RAR 51031678_3 ORACLE RDBMS 10.2 Windows 3 of 5
RAR 51031678_4 ORACLE RDBMS 10.2 Windows 4 of 5
RAR 51031678_5 ORACLE RDBMS 10.2 Windows 5 of 5
ZIP 51033272 ORACLE 10.2 Client
ZIP 51036971_2 ORACLE RDBMS Patch 10.2.0.4 Windows Server on IA32 32bit
ZIP 51036971_3 ORACLE RDBMS Patch 10.2.0.4 Windows Server on IA64 64bit
ZIP 51036971_4 ORACLE RDBMS Patch 10.2.0.4 Windows Server on x64 64bit
Regards
Uday

Oracle Critical Patch Update July 2009 for Oracle BEA Releases

Hi All,
Researching in metalink about CPU's for WLS 9.1 I found Oracle Support Note #835668.1. Table 9 of this document
lists minimum product requirements for WebLogic server.
According to this table WLS 9.1 should have a minimum version of 9.2MP3.
I am confident that WLS 9.1 and WLS 9.2 are completely different WLS versions and there is no upgrade path from WLS 9.1 to WLS 9.2.
Is this table misprinted or is it required to replace all WLS 9.1 installations with WLS 9.2 installations?
What is this table trying to indicate?
Please assist.
It would be very helpful.
Thanks.

Oracle Critical Patch Update fix a list of bugs , oracle will release CPU in every three months interval.
you need to click the link which oracle has sent.
then choose your database version===then select the patch number===then on metalink download the patch
with patch there is read me file which tell you how to apply the patch on the database.
Thanks
Regards,
Taj

Oracle Database patching

Hi plz help me.
i want to learn oracle database patching from the people like u but before that i tried much hard to find the documentation of patching at oracle documentation center. now after searching it lot i m tired so plz can any one tell me the exact documentation by which i can learn patching for applications. plz help me.
nikhil

The patch(set) documentation is included in the patch zip file. The best way to learn about patching database should be to build a test db, then try to patch/upgrade it.
Nicolas.

AD 12.1.1 upgrade patch 2 workers continuously fail

Hi All
I have started an upgrade test for the purpose of migrating our production environment however after the R12 file system was created and the AD12.1.1 patch needs to be run it keeps failing, I am now stumped we have tried various links on metalink as well as an SR(wich after a whole day still has not been assigned :( ) _has anyone had and solved this issue_
AD 12.1.1 upgrade patch 2 workers continuously fail with
Worker Code Context Filename Status
1 Run AutoPatch R120 fnd_seed_stage_config.xdf FAILED
2 Run AutoPatch R120 fnd_seed_stage_entity.xdf FAILED
adwork001.log is as follows:
Start time for file is: Tue May 08 2012 17:58:48
adjava -ms128m -mx256m -nojit oracle.apps.fnd.odf2.FndXdfCmp &un_fnd &pw_fnd &un_apps &pw_apps &jdbc_protocol &jdbc_db_addr table &fullpath_fnd_patch/115/xdf_fnd_seed_stage_config.xdf &fullpath_fnd_patch/115/xdf_xsl
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/app/oracle/r12/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/app/oracle/r12/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/app/oracle/r12/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/app/oracle/r12/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/app/oracle/r12/apps/apps_st/comn/java/lib/appsborg.zip:/u01/app/oracle/r12/apps/tech_st/10.1.2/forms/java:/u01/app/oracle/r12/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/app/oracle/r12/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/app/oracle/r12/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/app/oracle/r12/apps/apps_st/comn/java/classes"
Calling /u01/app/oracle/r12/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
XDF file application started. Current time is: Tue May 08 17:58:48 SAST 2012
================================================================================
Applying XDF file : /u01/app/oracle/r12/apps/apps_st/appl/fnd/12.0.0/patch/115/xdf/fnd_seed_stage_config.xdf
================================================================================
Copyright (c) 2003 Oracle Corporation
Redwood Shores, California, USA
XDF(XML Object Description File) Comparison Utility
Version 1
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Table Name is FND_SEED_STAGE_CONFIG
Exception occured :invalid name pattern: APPS.FND_XDF_TABLE_OF_VARCHAR2_30
java.sql.SQLException: invalid name pattern: APPS.FND_XDF_TABLE_OF_VARCHAR2_30
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.

Please refer to:
Interoperability Notes EBS R12 with Database 11gR2 [ID 1058763.1]
http://blogs.oracle.com/stevenChan/entry/db_11gr2_11202_ebs
Thanks,
Hussein

Upgrade patch from Apex 1.6 to 2.2.1

Hi, we are trying to upgrade our Apex installation from 1.6 to 2.2.1. The database version is 10.1.0.3.0
The plan is to install 10g Rel2 database (upgrade to 10.2.0.2) and Apex 2.2.1 on another file system on the server (since we don't have a separate play area) and export the data from 1.6 and import it into the 2.2.1 installation.
Not sure what the gottchas with this plan are. I want to move away from 10.1.0.3.0 database b'coz there are no Oracle CPU patches for that version. Not sure if I should go with 10.1.0.3.0 database for now, get done with the Apex upgrade and then try to upgrade to 10.2 db at a later date or if I can go ahead and try it out with 10.2.0 database right now.
Any inputs are highly appreciated.
Thanks.

Hi:
have you got any response on this ? What's the reason you are planning to upgrade ? The reason I asking this question because I am hearing some security vulnerability with 1.6 which is fixed on 2.2.1.
Any feedback will be appreciated.
cheers

Oracle upgradation patch

Similar Messages

Maybe you are looking for