Oracle Upgrade - Help
Hi,
We are planning to upgrade our Oracle RDBMS from 9(9.2.0.7) to 10R2. As a preparation I was performing some test on a staging server.
I simulated our current env by installing 9.2.0.7 and creating the DB. This is under an oracle9i unix user (oinstall, dba group) and oracle Home --> /opt/oracle/product/9.2/
Next I installed 10.2.0.1 using a new user oracle10 (oinstall and dba group) under the oracle home /opt/oracle/product/10.2/
While i login as oracle10 and perform an sqlplus "/ as sysdba" it keeps giving me the ORA-12560: TNS:protocol adapter error
Because of this I cannot run the upgrade SQL
The ORACLE SID and ORACLE HOME are correctly set
If i login as oracle9i user and perform the same I can login to the database and is fine.
While installing Oracle10 can i install it using the same unix owner of Oracle 9i or should I perform it as a different user.
If you are referring to the test environment. Make sure that at install time you have defined the administrative group to be consistent. On the other hand, when you have the same box with a mixture of oracle homes, you must be careful with the environment variables defined. If you also mix the environment variables you will have funny results. It looks like variables such as LD_LIBRARY_PATH and PATH are mixing the libraries from the 10g and 9i environments.
~ Madrid
http://hrivera99.blogspot.com
Similar Messages
-
Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]
Hi Deepak/Folks,
Another question that I have is that while doing the Oracle Upgrade on an EP server, the patches were not installed properly and I had to shut down the Patches installation after it did not do anything for a while.
Now when I try to install the patches it fails telling me that the Installed patches cannot be verified, I had written to SAP and they told me to follow the
SAP note 1862446 - Inventory
load failed... OPatch cannot load inventory for the given Oracle Home
and re-create the oracle inventory.
This has also not helped in anyway.
Is there a solution to this problem.
Following is the error that I am getting when I try to Install the patches
Getting pre-run patch inventory...
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory.
Refer to log file
$ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-14-52-51.log
when I open the log file specified here I get the following
more mopatch-2014_08_06-14-52-51.log
more /oracle/<SID>/11203/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
MOPatch - Install Multiple Oracle Patches in One Run - 2.1.15.
Copyright (c) 2007, 2013, Oracle and/or its affiliates. All rights reserved.
Version: 2.1.15
Revision: 5.1.2.26
Command-line: /oracle/<SID>/11203/MOPatch/mopatch.sh -v -s SAP11203P_1312-20009978.zip
Oracle Home: /oracle/<SID>/11203
RDBMS version: 11.2.0.3.0
OPatch version:11.2.0.3.3
Clean-up: supported
PSUs: supported
Log file: $ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
Patch base: .
Patch source: SAP11203P_1312-20009978.zip
Link script: ./link.mts<SID>ua.sh
Readmes: <none>
Strpd. Readmes:<none>
make utility: /usr/ccs/bin/make
unzip utility: /oracle/<SID>/11203/bin/unzip
User name: ora<SID>
Working dir: /oracle/stage
System: HP-UX mts<SID>ua B.11.31 U ia64 2468369872 unlimited-user license
Disk free: 11734549 KBytes on /oracle/<SID>
Disk required: 886496 KBytes on /oracle/<SID>
Getting pre-run patch inventory...
executing: "/oracle/<SID>/11203/OPatch/opatch" lsinventory -retry 0 -xml "./mopatch-187-21696-tmpdir/preinv.xml"
========================================================
GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
========================================================
Oracle Interim Patch Installer version 11.2.0.3.3
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home : /oracle/<SID>/11203
Central Inventory : /oracle/<SID>/oraInventory
from : /oracle/<SID>/11203/oraInst.loc
OPatch version : 11.2.0.3.3
OUI version : 11.2.0.3.0
Log file location : /oracle/<SID>/11203/cfgtoollogs/opatch/opatch2014-08-06_15-01-56PM_1.log
List of Homes on this system:
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
Possible causes are:
Oracle Home dir. path does not exist in Central Inventory
Oracle Home is a symbolic link
Oracle Home inventory is corrupted
LsInventorySession failed: OracleHomeInventory gets null oracleHomeInfo
OPatch failed with error code 73
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory. Exiting.
I would appreciate if you folks can help me out on this
Thanks
APSFOLLOW UP QUESTION BRANCHED:
Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR] -
Oracle Upgrade to 9i for BO 5i
I'm preparing for an Oracle upgrade from 8.1.6 to 9.2 and a unix server migration via Oracle Export / Import. Potentially going on to 10g at a later point.
Will importing the BO user and re-pointing users to the new database be sufficient to upgrade the BO elements or are there other steps? I believe some overnight jobs are kicked off externally by what sounds like the "SDK" so I don't believe there are any server related BO elements in BO 5i.
All help appreciated. Information on the ground here is quite sketchy and I'm not a BO person.
Regardsyou can always upgrade to new versions from lower versions.
(upgradation to 9i from 7.x is also possible) -
Oracle Upgrade 8.1.7.4 to 10g in Red hat linux
Dear All,
We are planning to upgrade our oracle database from 8i to 10g along with the Redhat linux upgrade from 2.4.9-e 27 ent to Red Hat Linux 5. In my study and also from Installation guides and oracle upgrade guides I made sure that its possible to upgrade our database from 8.1.7.4.
So I have planned the below options to do the same and not sure about the possibilities. If anyone have thoughts and idea on the same please suggest me.
We dont have plan to migrate the development hardware and the sap version is 4.7E
Option 1: Upgrade the Linux to 5 and then upgrading the database to 10g usign upgrade assistant tool
Option 2: Export the database using sapinst tool and then crashing the server. Installing linux5 and importing the database using sapinst tool.(I am aware this is not a good idea since there is no migration in hardware but it will be helpful in production since we are migrating the production system).
Option 3: Performing DBUA assistant in development and sapinst method in production.(helpful in disaster recovery)
Could you please suggest on the same?
My query is that.
If i am performing oracle export from 8.1.7.4 and if i am import the same in oracle 10g using the sapinst tool. Will this work? or it will create a problem in table level. I am looking for answers for this Question. Kindly explain me on this.
Regards
VijayRe: Restoring data from 9i to 10g
The above link was useful to me
Regards
Vijay -
Oracle Upgrade -- Pre-Upgrade 10.2.0.4 to 11.2.0.1
Hello,
I want to do an Oracle Upgrade to version 11.2g!
At this point I did some things (in Windows Server 2003 X64):
1-) Install Oracle 10.2.0.1 (DVD Media);
2-) Installation of Oracle patchset 10.2.0.4 (note 871735);
3-) Installation of interim / last generics patch (note 1137346);
4-) Installation of SAP ECC 6.0 SR3 by SAPInst
5-) After SAP installation I did all the corrections in Oracle parameters as it mentioned in note 830576.
As you see above, all the SAP system was well installed!
But now I want to do the Oracle Upgrade process to the last version, Oracle DB 11.2g (11.2.0.1)... and so I´m following the Upgrade guide "Upgrade to Oracle Database 11g Release 2 (11.2) Windows.pdf" with some SAP notes for Upgrade process.
So I´m at this point in planning chapter where is recommended to check so things in actual database, one of this checks are running some SQL-scripts to perform an Oracle database upgrade with DBUA to release 11.2 (as mentioned in note 1431793 - Oracle 11.2.0: Upgrade Scripts)
I ran two Pre-Scripts, the @pre_upgrade_status.sql and @pre_upgrade_tasks.sql but both outputs showed some warnings and they are worrying me... so what I ask to you is some kind of help in analyse of them and tell me if this issues are relevant for the upgrading process and if so, what you recommend me to do to correct their!
Next I will post here this two log scripts... they are long!!!PRE_UPGRADE_TASKS.log:
SQL> @pre_upgrade_tasks.sql
PRE-UPGRADE Tasks: === START ===
2010-08-05 18:24:13
Recompiling invalid objects
This reduces the number of invalid objects as much as possible.
COMP_TIMESTAMP UTLRP_BGN 2010-08-05 18:24:13
DOC> The following PL/SQL block invokes UTL_RECOMP to recompile invalid
DOC> objects in the database. Recompilation time is proportional to the
DOC> number of invalid objects in the database, so this command may take
DOC> a long time to execute on a database with a large number of invalid
DOC> objects.
DOC>
DOC> Use the following queries to track recompilation progress:
DOC>
DOC> 1. Query returning the number of invalid objects remaining. This
DOC> number should decrease with time.
DOC> SELECT COUNT(*) FROM obj$ WHERE status IN (4, 5, 6);
DOC>
DOC> 2. Query returning the number of objects compiled so far. This number
DOC> should increase with time.
DOC> SELECT COUNT(*) FROM UTL_RECOMP_COMPILED;
DOC>
DOC> This script automatically chooses serial or parallel recompilation
DOC> based on the number of CPUs available (parameter cpu_count) multiplied
DOC> by the number of threads per CPU (parameter parallel_threads_per_cpu).
DOC> On RAC, this number is added across all RAC nodes.
DOC>
DOC> UTL_RECOMP uses DBMS_SCHEDULER to create jobs for parallel
DOC> recompilation. Jobs are created without instance affinity so that they
DOC> can migrate across RAC nodes. Use the following queries to verify
DOC> whether UTL_RECOMP jobs are being created and run correctly:
DOC>
DOC> 1. Query showing jobs created by UTL_RECOMP
DOC> SELECT job_name FROM dba_scheduler_jobs
DOC> WHERE job_name like 'UTL_RECOMP_SLAVE_%';
DOC>
DOC> 2. Query showing UTL_RECOMP jobs that are running
DOC> SELECT job_name FROM dba_scheduler_running_jobs
DOC> WHERE job_name like 'UTL_RECOMP_SLAVE_%';
DOC>#
COMP_TIMESTAMP UTLRP_END 2010-08-05 18:24:15
DOC> The following query reports the number of objects that have compiled
DOC> with errors (objects that compile with errors have status set to 3 in
DOC> obj$). If the number is higher than expected, please examine the error
DOC> messages reported with each object (using SHOW ERRORS) to see if they
DOC> point to system misconfiguration or resource constraints that must be
DOC> fixed before attempting to recompile these objects.
DOC>#
0
DOC> The following query reports the number of errors caught during
DOC> recompilation. If this number is non-zero, please query the error
DOC> messages in the table UTL_RECOMP_ERRORS to see if any of these errors
DOC> are due to misconfiguration or resource constraints that must be
DOC> fixed before objects can compile successfully.
DOC>#
0
Purging Recyclebin
This reduces the time needed for upgrading the database.
Truncating SYS.AUD$
This reduces the time needed for upgrading the database.
Gathering Oracle Dictionary Statistics
This reduces the time needed for upgrading the database.
Running Pre-Upgrade-Information Tool utlu112i.sql
This is a mandatory task for manual database upgrades.
This tool is also run in pre_upgrade_status.sql.
Oracle Database 11.2 Pre-Upgrade Information Tool 08-05-2010 18:24:45
Script Version: 11.2.0.1.0 Build: 003
Database:
--> name: PRD
--> version: 10.2.0.4.0
--> compatible: 10.2.0
--> blocksize: 8192
--> platform: Microsoft Windows x86 64-bit
--> timezone file: V4
Tablespaces: [make adjustments in the current environment]
--> SYSTEM tablespace is adequate for the upgrade.
.... minimum required size: 905 MB
--> PSAPUNDO tablespace is adequate for the upgrade.
.... minimum required size: 84 MB
--> SYSAUX tablespace is adequate for the upgrade.
.... minimum required size: 210 MB
--> PSAPTEMP tablespace is adequate for the upgrade.
.... minimum required size: 61 MB
Flashback: OFF
Update Parameters: [Update Oracle Database 11.2 init.ora or spfile]
Note: Pre-upgrade tool was run on a lower version 64-bit database.
--> If Target Oracle is 32-Bit, refer here for Update Parameters:
-- No update parameter changes are required.
--> If Target Oracle is 64-Bit, refer here for Update Parameters:
WARNING: --> "shared_pool_size" needs to be increased to at least 472 MB
Renamed Parameters: [Update Oracle Database 11.2 init.ora or spfile]
-- No renamed parameters found. No changes are required.
Obsolete/Deprecated Parameters: [Update Oracle Database 11.2 init.ora or spfile]
--> remote_os_authent 11.1 DEPRECATED
--> background_dump_dest 11.1 DEPRECATED replaced by "diagnostic_dest"
--> user_dump_dest 11.1 DEPRECATED replaced by "diagnostic_dest"
Components: [The following database components will be upgraded or installed]
--> Oracle Catalog Views [upgrade] VALID
--> Oracle Packages and Types [upgrade] VALID
Miscellaneous Warnings
WARNING: --> Database is using a timezone file older than version 11.
.... After the release migration, it is recommended that DBMS_DST package
.... be used to upgrade the 10.2.0.4.0 database timezone version
.... to the latest version which comes with the new release.
Recommendations
Oracle recommends gathering dictionary statistics prior to
upgrading the database.
To gather dictionary statistics execute the following command
while connected as SYSDBA:
EXECUTE dbms_stats.gather_dictionary_stats;
Oracle recommends removing all hidden parameters prior to upgrading.
To view existing hidden parameters execute the following command
while connected AS SYSDBA:
SELECT name,description from SYS.V$PARAMETER WHERE name
LIKE '\_%' ESCAPE '\'
Changes will need to be made in the init.ora or spfile.
Oracle recommends reviewing any defined events prior to upgrading.
To view existing non-default events execute the following commands
while connected AS SYSDBA:
Events:
SELECT (translate(value,chr(13)||chr(10),' ')) FROM sys.v$parameter2
WHERE UPPER(name) ='EVENT' AND isdefault='FALSE'
Trace Events:
SELECT (translate(value,chr(13)||chr(10),' ')) from sys.v$parameter2
WHERE UPPER(name) = '_TRACE_EVENTS' AND isdefault='FALSE'
Changes will need to be made in the init.ora or spfile.
PRE-UPGRADE Tasks: === FINISHED ===
SQL> spool off -
Hi
I did an oracle Upgrade from Oracle Upgrade 9.2.06 to 10.2 as per SAP Documentation.
and after the upgrade was successful i changed the password of SAPABT (sapowner)
and now it is giving an error in work folder <b>dev_wo</b>
while connecting can any one help please ?
Tue Feb 06 18:55:20 2007
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPABT's password
C Connecting as /@ABT on connection 0 (nls_hdl 0) ... (dbsl 640 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 WE8DEC 1 044FAB58 045000D4 044FF95C
C Attaching to DB Server ABT (con_hdl=0,svchp=044FF8A8,svrhp=04503F14)
C Starting user session (con_hdl=0,svchp=044FF8A8,srvhp=04503F14,usrhp=08C48D68)
C Now '/@ABT' is connected (con_hdl 0, nls_hdl 0).
C Got SAPABT's password from OPS$-user
C Disconnecting from connection 0 ...
C Close user session (con_hdl=0,svchp=044FF8A8,usrhp=08C48D68)
C Now I'm disconnected from ORACLE
C Connecting as SAPABT/<pwd>@ABT on connection 0 (nls_hdl 0) ... (dbsl 640 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 WE8DEC 1 044FAB58 045000D4 044FF95C
C Starting user session (con_hdl=0,svchp=044FF8A8,srvhp=04503F14,usrhp=08C48D68)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c 4473]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c 11297]
B ***LOG BY2=> sql error 1017 performing CON [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 1017 performing CON [dblink#2 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#2 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1284]SQL> connect / as sysdba
Connected.
SQL> SELECT OWNER FROM DBA_TABLES WHERE TABLE_NAME = 'SAPUSER';
OWNER
OPS$CTSINTCOSNW5\ABTADM
SQL> SELECT OWNER, TABLE_OWNER, TABLE_NAME FROM DBA_SYNONYMS WHERE SYNONYM_NAME
= 'SAPUSER';
OWNER TABLE_OWNER
TABLE_NAME
OPS$CTSINTCOSNW5\SAPSERVICEABT OPS$CTSINTCOSNW5\ABTADM
SAPUSER
SQL>
Followed the note 400241 Problems with ops$ or sapr3 connect to Oracle
Problem got solved via the
Updating BR * Tools
brconnect -u / -c -f stats -t all -f collect -p 4 in Oracle Database Guide 4.3.6 BRCONNECT
Call BRTOOLS, Select Additional Functions --> Change password for database user.
in my case it is sapabt user
Thanks for the quick reply -
Oracle Upgrade 9.2.0.5.0 to 10.2.0,2
Hi!
Please help!, We are doing an oracle upgrade from 9.2.0.5.0 to 10.2.0.2 in HP-UX but the DBUA stops with the following in the logs:
In the user trace I see this:
ORA-942 on service$ trapped and ignored during OPEN for migrate
unexpected exception err=604, err2=942
In the oracle_server.log
CREATE OR REPLACE TYPE sys.streams$transformation_info
ERROR at line 1:
ORA-03113: end-of-file on communication channel
About 20 minutes later in the oracle alert log a core dump:
ORA-07445: exception encountered: core dump [koputilassert()+12] [SIGBUS] [unkno
wn code] [0x000000000] [] []
Please any advice would be greatly appreciated.
Thanks in advance
Erika
Edited by: ERIKA BORREGO on May 21, 2008 6:36 PMLooks like metalink 435400.1
I suggest you open a call @ SAP and let them look on the system.
Markus -
Oracle upgrade exam from oracle 9i to oracle 11g
Hi,
I want to give oracle upgrade exam from oracle 9i to oracle 11g release2.
But i do not have material for preparation of this exam. Oracle Database 11g: New Features for 9i OCPs", also known as 1z0-055 exam.
Please any one give me PPT or PDF or link from where i can get it? . which can help me to read for exam.
Thanks in advance.
Edited by: user647572 on Dec 26, 2011 5:10 AMuser647572 wrote:
Hi,
I want to give oracle upgrade exam from oracle 9i to oracle 11g release2.
But i do not have material for preparation of this exam. Oracle Database 11g: New Features for 9i OCPs", also known as 1z0-055 exam.
Please any one give me PPT or PDF or link from where i can get it? . which can help me to read for exam.
Thanks in advance.
Edited by: user647572 on Dec 26, 2011 5:10 AMI dispair when an Oracle Certified Professional says he does not have 'preapartion material' and asks for a PDF link.
.... The most likely response is from someone training to sell unauthorised learning materials.
..... The OCP should understand the exams topics and online manuals for 11g should be sufficient. Oracle Press Books and Sybex Books for 11g DBA OCP should also cover number of the required topics if that helps. Not to mention Oracle University Training.
...... But an OCP asking for a 'PDF' or 'PPT' for the 1z0-055 exam ??????? .... what form of content are you thinking? -
Oracle Upgrade from 8.1.7.4 to 9.2
Hi ALL,
I am having a problem when i am trying to upgrade oracle from 8.1.7 to 9.2.
I have installed Oracle 9i in seperate oracle home directory than the original 8.1.7 home directory. After that i have removed oracle_home = sid from <SID>adm user environment as described in sap upgrade manual.i have logged in again to activate the variables. When i am trying to start database upgrade assistant in new oracle 9i. it is showing me the old oracle home and asking me to upgrade. when i press enter..it is erroring out saying ora 12560 error.
Guys, could you please let us know why these error occured. Did i miss something as i followed sap document on oracle upgrade.
Thanks in advance..Hello vales,
Even i dont know how it worked .. upgrade assistant started working when i logged in with administrator account with which i installed oracle installations...
Thanks -
Hello,
I am new to Oracle and sql. I am working on the Oracle
Reports. Can anyone suggest me where will be the best place to
get help on this. Any suggestions will be appriciated.
Thanks
SamHi Sam..
I'm also quite new in field of Oracle Reports, I have already
had experience in Oracle Database Server. I think you may refer
to the Oracle Reports help coming with your s/w, that's good for
first understanding. Then.. I just find out that this forum is
also helpful with many nice and "willing to help" people.
Well... wish you all the best and go ahead with your new job!!
kr,
daniel -
Oracle upgrade 9.2.0.7.0 to 10.2.0.4
Hello All,
We have to do oracle upgrade from 9.2.0.7.0 to 10.2.0.4.
OS : AIX 5.3
Sap Version :- SAP R/3 Enterprise ;Release 620
Kernel relaese :- 640 patch level 221
Looking for Compatibility Document or notes.
Regards,
Rupal kankaneyHi,
A number of note available for oracle upgrade from 9i to 10g :
Note 1151509 ORA-600[Kcbz_check_objd_typ_1] Upgrading from 9i to 10g
Note 830577 Oracle Database 10g: ORA-21700 when upgrading to 10.1/10.2
Note 819830 - Oracle Database 10g: Additional Information on upgrade:UNIX
Note 830576- Oracle Parameter Recommendation for Oracle 10g. And a lot of other notes on SMP.
Thanks
Sunny -
Oracle Upgrade 10.2.0.2 to 11g
Hello,
We have planed to upgrade the database Oracle from 10.2.0.2 to 11g.
We are wondering wether there is a risk to upgrade directely to 11g from our current version.
Also, what are the important points to observe and what are the tests to do in SAP before upgrading ?
Many thanks in advance
Regards
BenJust follow the Oracle upgrade guides at
http://service.sap.com/instguides
--> Database Upgrades
--> Oracle
- read all the notes mentioned in the guide
- make sure you use a proper kernel and a proper instantclient
- make sure you apply not only the upgrade itself but also all PSU patches
- take a full backup of the system
I suggest to first upgrade a test and/or qa system and then do the production.
Markus -
Hi,
I have just got the login details of Oracle Support.
I have some Q's regarding client site and want to post on metalink to seek Oracle experts help
How I can do that?
ThanksHi 787186 ;
Yes, I read to use the button, but just couldn't found the create SR button
I'm service requests tab
can't find the buttonIf you have open SR permission(your admin can give that right to you) than Service Request tab next to Knowledge tab on metalink main page.
Please contact wiht your Metalink admin and ask for you have permisson for can create SR or not?
Regard
Helios -
Comparision of Oracle upgrade(9i to 10g) and export/import process
Hi Friends,
I have a schema in Oracle 9i Database and i would like to have it in Oracle 10g.
I ned to know what will be the advantages and disavantages between the Oracle upgrade(9i and 10g) and export/import (9i export and 10g import)process?
Please suggest.
RegardsPlease go this link for new features of 10g:
[http://www.oracle.com/technology/pub/articles/10gdba/index.html]
For export and import go to this link:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm
Regards
Asif Kabir -
Hi,
Can anyone send me oracle 10g help file. which file has information about the exceptions.
Uttam SInghPavan Kumar wrote:
Hi,
Are you referring to PL/SQL Exceptions or Error Messages.
With respect to PL/SQL Exceptions -
Refer to : http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28370/errors.htm
and
http://download.oracle.com/docs/cd/B10500_01/appdev.920/a96590/adg10pck.htm
- Pavan Kumar NPavan
One book is of 11g, another of 9i, neither is of 10g whicj is of OP's version.2ndly, even PL exceptions are listed in the error book given already Orionnet.
Aman....
Maybe you are looking for
-
Can you edit a person from one photo and add them to another photo?
Can you edit a person out of one photo and add them to another photo? Like if you need the head shot from one photo to replace closed eyes in the other photo? Thanks.
-
How can I create an ActiveX IDL to pass an array of references into Labview
It appears that LV is designed to be able to receive a COM variant that contains an array of references but I cannot understand what the appropriate IDL should be on the COM side of things. I am current trying to use a safearray to hold the reference
-
Form is giving me error in Acrobat 8, but not Reader 8?
Ok, so I created a form in Livecycle Designer, and I made it so that when a certain option is selected from the drop down box, new form fields will automatically pop up. First off, there is one box that takes a few seconds to pop up when the selectio
-
Thru code how to create a context node n context attribute for a table
Hi Friends....i need some clarification...according to my requirement i need 2 create contx node n ctx attribute for a table..i.e through the code(implemention NWDS) means this has 2 b done in dynamically... More clearly according to the struct
-
Selling software programmed with Java language
Hello, I'm new to the forums and currentley taking a Java programming class. A questions came up among the students.... If I were to develop a program in the Java language and sell the Java-coded software for profit, what licenses would I need?