Oracle WAM v1.9 : Default admin login

Hi
I have installed Oracle Utilities Work and Asset Management v1.9 following the instructions in the install guide.
I can see the login screen with the url : http://<host>:<port>/DEMO/synergen
But i couldnot find the credentials(username/password) for the default admin user to logon.
Please help.
Thanks
Soumik

I found the answer in another area.
weblogic/weblogic
Apparently, I fat fingered it a few times.

Similar Messages

AMS on EC2 - is there a default admin login?

Is there a default admin login for ams_adminConsole.htm on a new instance? I just launched an instance of ami-766cce1f and am trying to find my way through the available control interfaces. It's way different than running a Wowza server!

Hi,
There is no default login for the admin server. Please refer to this doc to configure one:
http://forums.adobe.com/docs/DOC-2334
You can create a user date script and use it while creating an instance so that you don't have to do this manually again.
Thanks,
Shiven

What is the default admin user account login id and password in Windows 8?

Hi all,
The current admin acccount in Windows 8 system are changed to Standard and no other Admin account is available in the system.
What is the default admin user account login id and password in Windows 8?
Or
Is there way to change the User role for the account?
Please use Marked as Answer if my post solved your problem and use
Vote As Helpful if a post was useful.

I am able to login as a Normal user, can not login as administrator.Hence can not install any software or change my user settings or create a new user.
What is the default admin password. How can i reset it form my user account
C:\Users\Amit>net user Administrator
User name                    Administrator
Full Name
Comment                      Built-in account for administering the computer/domain
User's comment
Country/region code          000 (System Default)
Account active               No
Account expires              Never
Password last set            7/26/2012 12:57:03 PM
Password expires             Never
Password changeable          7/26/2012 12:57:03 PM
Password required            Yes
User may change password     Yes
Workstations allowed         All
Logon script
User profile
Home directory
Last logon                   9/16/2013 1:16:30 PM
Logon hours allowed          All
Local Group Memberships      *Administrators
Global Group memberships     *None
The command completed successfully.

Product number CQ183A can not access setting in EWS keeps asking for admin login and password.

HP Photosmart 5510d B11H
CQ183A
Windows 7, Vista, and Linux
I installed the printer everything works until I try to access certain settings in the Embedded Web Server. I pops up a box asking for admin login. Initially, the status page claimed the Admin password was set even though I never set that up. Through chatting with tech support rests cleared this, it is now reporting Not Set. However, I still can not login to check/change settings etc.
I think this printer had been purchased then returned to the store because the manual was missing. I downloaded the manual and did not find any mention of how to access the password settings. So far tech support has not been able to answer my question,
Is there a default?
How do I access the EWS settings -> security to setup a password?

Hello MREnder,
From what I am reading, you may need to call in to get a factory reset done. These resets can only be done over the phone. You can find the number at eprintcenter.com under the support section.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

IViews throwing exception from Non Admin Login?

Hi,
I have created some iViews using .Net PDK for SAP.
I have added these iViews to a page. Then the page is added to workset. I have created a new role and assigned this workset to the new Role. Then I have created a new User and associated this user with the newly created Role.
Now the problem is whenever I login to portal using new user name and password I am able to see the workset as well as page and iViews. But these iViews are throwing following exception.
An Error occurred while processing one of the iViews on this page in the .NET server.
More information:
1. Default Trace
Exception id: 10:37_04/10/05_0037_6409650
However these iViews are running properly when I preview them from admin login.
What are possible causes/solutions for the above mentioned behavior?
Thanks for suggestions
Regards,
Vikas Khandpur

Hi Vikas
You should use the Permission Editor to assign user, group and role permissions to portal objects.
You can launch the Permission Editor in two ways:
1. Using the central Permission Editor
a. Choose System Administration ® Permissions.
b. Locate the folder or object you want to assign or edit permissions for, right-click it and choose Open ® Permissions from the context menu.
2. Using the object-specific Permission Editor
a. Launch the relevant administration tool or editor in the portal.
b. In the Portal Catalog, locate the object or folder to want to set or edit permissions for. Then, do one of the following:
i. Right-click the object and choose Open ® Permissions from the context menu.
ii. Open the object in the editor, and from the Display menu or drop-down list, choose Permissions.
To know how to set permissions in the permission editor, please refer to the following thread.
http://help.sap.com/saphelp_nw04/helpdata/en/f6/2604db05fd11d7b84200047582c9f7/content.htm
As for your doubt on why you are able to view the iViews from an administrator's login,it is because The standard super administer role is assigned maximum access to the entire set of portal initial content. The Super Administrator role is assigned by default to the Administrators group. Therefore, initially all standard administrator users have super administrator permissions in the portal.
Hope that helped.
Best Regards
Priya

Default shell login not taking effect.

Hello all. MBP running 10.5.1 as a portable user on a 10.5.1 Server fresh build.
A user's default shell login was originally set to /bin/bash. I then changed it to "none" and now can not change it back to "/bin/bash" or any other shell. Even when I change it and WGM sows it has been changed, when I launch terminal it says "You are not authorized to run this application".
I've changed the settings a handful of times, threw out most of the com.apple preferences and just don't see where the preference is stored. How can I reset the shell to the default '/bin/bash' ?

I've checked a dozen or so locations for a reference to the default browser and found one at ~/.account. It says the default browser is set to /dev/null (NONE). So I changed it reflect /bin/bash. Logged out and back in and it didn't work. Still trying to go to /dev/null. So I imagine that this is a problem with the the environmental variable for that user.
So, how do you set the environmental variable for a user who you can't log in to the shell with? I am logged into the computer with another admin account, and can get into su mode to modify settings. But how do you pull a different user's environmental variables so a super user can modify them?

Windows 8 admin login

I am trying to log on as the admin on windows 8 but the users and groups folder is'nt there

I am able to login as a Normal user, can not login as administrator.Hence can not install any software or change my user settings or create a new user.
What is the default admin password. How can i reset it form my user account
C:\Users\Amit>net user Administrator
User name                    Administrator
Full Name
Comment                      Built-in account for administering the computer/domain
User's comment
Country/region code          000 (System Default)
Account active               No
Account expires              Never
Password last set            7/26/2012 12:57:03 PM
Password expires             Never
Password changeable          7/26/2012 12:57:03 PM
Password required            Yes
User may change password     Yes
Workstations allowed         All
Logon script
User profile
Home directory
Last logon                   9/16/2013 1:16:30 PM
Logon hours allowed          All
Local Group Memberships      *Administrators
Global Group memberships     *None
The command completed successfully.

Default admin user name password

After snow leopard server was installed successfully from the install dvd and mac mini server was restarted to continue the setup, I entered in the server serial number and it tells me it's "Setting Up ... Your server is being configured."
In the bottom left corner of screen it showed "Upgrading services" and after about 10 minutes when the progress bar was about 2/3 full, an error message was shown "An error occurred while configuring your server." and "Your server needs to be restarted to complete setup."
After I clicked "restart" button, the mac mini booted showing me a login dialog to ask me to log in. But the problem is I did not even get a change to create an admin account yet because the failure earlier!
So what's the default admin account user name and password so that I can continue the setup process?
Many thanks in advance.

Finally I decided to reboot the mac mini server from a remote dvd drive again to verify the mac mini server serial number using system profiler of the installer. The serial number shown in profile is consistent with the one shown on the bottom of the mini. So it seems to me the password setting somehow corrupted during the previous configuration error.
I then use "reset password" from utilities menu of the installer to reset the root password. After that, Server Admin on the admin macbook can connect to the server without problems using the reset password.

Freeze after admin login

Hi everyone,
I have a MacBook Pro, running OS 10.4.11 and two accounts: an admin account in my name and a Guest account with no password.
About a month ago, Safari started unexpectedly quitting whenever I tried to load a page. I sent a crash report but thought nothing of it and just used Firefox until yesterday, when the same thing started happening to more apps like Skype and iChatAV. I had the latest versions of all of these apps.
When I restarted I came across a bigger problem. Now when I try to login to my admin account, the computer will freeze on login. The login window will say "Logging in..." then disappear to the default background, and then the computer will freeze. It always does this, before any menus or my personal desktop appear. The mouse is still movable. Sometimes, after a few minutes, the login screen reappears, as if I never logged in. Then I try again and it still freezes.
But here's the kicker. I can still login fine to the Guest account with no freezing or application problems. I tried a bunch of restart/shutdown combos but to no avail.
I then tried safe boot and no-start-up-items boot. I also booted from the install disk and ran disk utility. I verified, repaired permissions and repaired the disk. Nothing changed - same problem. I looked through a bunch of material on the support site but could not find anything particularly applicable. I cannot identify the problem. I'm resigning myself to the fact that I'll probably have to reinstall the system software, but I'm hoping by posting here that people may have a better solution.
I also recently installed the last security update (unsure which one), if that helps. I found a bunch of useful things to try here: (http://forums.osxfaq.com/viewtopic.php?f=14&t=7269) but much of this I cannot do without admin permissions. Also, I'm afraid to do anything drastic or unnecessary until I know more about the problem itself.
So can anyone help? Your help would be GREATLY appreciated and could save me from quite a deal of effort.

So, honestly, is there no redemption for that original account?
There most certainly is, but the hard part is figuring out which of the tens of thousands of files are the munged ones.
I was thinking of running DiskWarrior but I can't seem to mount my external drive (separate problem?) to make a backup, and I'm nervous to run DW without a backup.
Nothing like a Backup, but I'd be the least nervous about running DiskWarrior than anything else!
It seems like I might as well just take what I need from my old account manually and then trash it and start afresh. What are the problems with this mentality?
Let's wait on that, unless you're critically short on HDD free space.
What are the problems with this mentality? If I do, how to do I make the full transformation (permissions and everything) of designing my new admin account the "default" admin account?
Let's see if where we have problems first.

Do i need a separate appleID and password for itunes store, icloud and app store apart from my admin login and password?

after having my mbp upgraded with new m.lion by apple tech service i noticed that applications like iphoto, garageband and imovie are gone
researched online and was told that i had to acess the `purchase` via AppStore where it asks me to log in with Apple ID and password
i used the usual admin login and password and didnt work, also on itunes and icloud the similar case
do i need to register with a separate appleID and password for itunes store, icloud and app store apart from my admin login and password?

Just use the same Apple ID and password that you used to access this forum - that's your Apple ID.
The user name and password on your computer has nothing to do with your Apple ID.
Good luck,
Clinton

Is it possible to connect Sqlfire server with oracle using DBSynchronizer using default license

is it possible to connect Sqlfire server with oracle using DBSynchronizer using default license
Sql fire is my machine
Oracle is another machine
When i connect sqlfire with oracle using DBsynchronizer It shows the error message as Wan is not supported for default license
When i connect Sqlfie(my system) with oracle( another system) using JDBC Rowloader .nothing is happening after some time it shows the error like"time out for pool connection to archive database.When i increase the time out also nothing is happening.
what is the reason for above two errors(I stated in the pragraph.)
is it beacuse of wan netwrok not supported by default evaluation license?
could you please explain?

I don't think this has anything to do with a VMware product.

Whenever I launch firfox through non admin login, I get an alert message.

Whenever I open firefox through non admin login, I get following alert message. "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."
After this, firfox opens but whenever I go to any web page having secure connection like orkut, facebook etc. firefox crashes. It works normally through admin login.
== This happened ==
Every time Firefox opened
== I suppose this started when I updated it to latest version i.e. 3.6.8 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

Thankyou, for contacting Mozilla Firefox, Please join us on live chat so we can better assist you with your issue.

Error when Starting Default Admin Server

I have Installed WebLogic6.0 Beta Trial Version on Windows89.
When I Start the Default Admin Server It Starts Configuring but at last
terminates with Error :- Unable to Load Performance Pack Error.
Please Help
No Info available on bea site.
Manoj

WebLogic is not supported on Windows 98. We have found that it is
completely unsuitable as a server environment.
Michael Girdley
BEA Systems Inc
"Manoj" <[email protected]> wrote in message
news:[email protected]..
I have Installed WebLogic6.0 Beta Trial Version on Windows89.
When I Start the Default Admin Server It Starts Configuring but at last
terminates with Error :- Unable to Load Performance Pack Error.
Please Help
No Info available on bea site.
Manoj

Auto policy updates from DC1 to DC2 work but break user and admin login in DC2.

Auto policy updates from DC1 to DC2 work but break user and admin login in DC2.
Is there any solution to this ?

You will need to update your transformation rules to match the URL/hosts for dc2.

Pop of Admin login page

I have created a page where I have buttons like delete and create report buttons. I am able to delete or add row in report(on same page), but whenever I click on delete or Add button, application ask for Admin username and password. Afte giving username/password, operation gets successful. But I dont want this login page to pop after clicking delete or add button.
I have not written any process which ask application for this pop up. Infact i dont have any idea why pop up is coming.
To tackle this problem,I tried entering following in OPTIONAL URL REDIRECT in Delete button.
javascript:confirmDelete(htmldb_delete_message,'DELETE');
But after that delete button became inactive. I am not able to understand, what is going wrong here:-(
Please help me to get rid of Admin login Pop up.
Thanks in advance!!!

Hi Scott,
Thanks for reply, my name is Saurabh.
My workspace is HIGHER ED
Application can be accessed at following URL
http://SAURVERM-lap:8080/apex/f?p=400:1:8745831742165032:::::
Username:Admin
Password:higher ed
====================
On Customer Page, When you try to Add a Customer and push create button, it takes you first to Admin login page. Same is case with Delete button.
However, insertion and deletion operations are getting completed after providing Login details. But, I dont want application to ask for login details for addition and deletion of customer.
Thanks & Regards,
Saurabh

Oracle WAM v1.9 : Default admin login

Similar Messages

Maybe you are looking for