Oracle went down due to the errors:ORA-00206,ORA-00202,ORA-27072,OSD-04008.
I have an oracle testing instance on Windows NT. It went down every several months due to the same errors. The only difference is the control file number in the error message for every time. I fixed it by restarting the oracle service each time. Below is the error session in the alert log:
Sat Jul 01 16:57:12 2006
Errors in file D:\App\Oracle\admin\intrtest\bdump\intrtestCKPT.TRC:
ORA-00206: error in writing (block 3, # blocks 1) of controlfile
ORA-00202: controlfile: 'D:\APP\ORACLE\ORADATA\INTRTEST\CONTROL03.CTL'
ORA-27072: skgfdisp: I/O error
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because
another process has locked a portion of the file.
Sat Jul 01 16:57:12 2006
CKPT: terminating instance due to error 221
Instance terminated by CKPT, pid = 368
Any idea or suggestion?
Thanks
B.
Hi friends,
I am also facing the same error:
ORA-00345: Message 345 not found; No message file for product=RDBMS, facility=ORA; arguments: [45004] [2]
ORA-00312: Message 312 not found; No message file for product=RDBMS, facility=ORA; arguments: [1] [1] [E:\ORADATA\IFSL\REDO011.LOG]
ORA-27072: Message 27072 not found; No message file for product=RDBMS, facility=ORA
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
due to this, our database goes down, and it was currepted my Redo file as well. We have taken a Third party backup using named "Symentic". nybody have the idea, how can I avoid this error in future.
Regards,
Khushal S. Kulkarni
[email protected]
Similar Messages
-
Layer 2 trunk ports went down due to cisco 4500 core switch !!!
Hi Everyone,
My 2 Layer 2 2960 switchTrunk Ports went down due to cisco 4500 switch. It happening everytime . I rebbot the switch 4500 . then problem disappears but after sometime facing same issue.
Please help.My 2 Layer 2 2960 switchTrunk Ports went down due to cisco 4500 switch. It happening everytime . I rebbot the switch 4500 . then problem disappears but after sometime facing same issue.
Hmmmm ... You won't be able to determine anything if you won't provide any addition information. I mean what do you mean by "went down"? Did the port go into "error disable"?
If it went into error disable, console in both switches and post the output to the command "sh interface status err". -
Index construction for InfoCube went wrong due to SQL Error
Hello,
I searched the topic before posting most of them suggested to delete index manually and create it and check in RSRV and SE38 prg to SAP_INFOCUBE_INDEXES_REPAIR. this steps and all i followed but its not working fine.
The problem is Index construction for InfoCube went wrong due to SQL Error.
Job started
Step 001 started (program RSINDEX1, variant &0000000000203, user ID )
SQL: 16.07.2010 11:56:08 user
DROP INDEX "/BIC/FTTCSCH003~02"
SQL Error: [IBM][CLI Driver][DB2] SQL0904N Unsuccessful exec
SQL-END: 16.07.2010 12:06:10 00:10:02
System error: RSDU_INFOCUBE_INDEXES_DROP/DD_DROP_INDEX /BIC/FTTCSCH003 020 DB2
Report RSINDEX1 ended with errors
Job canceled after system exception ERROR_MESSAGE
Regards,
Rangaas no one is my answering my question i am going to close this thread, admin pl delete this thread.
Thanks,
Ranga -
Hi, My network went down earlier in the week. Now the network is fine, I can connect through the ethernet cable, but my macbook airport no longer detects it, when prompted, macbook will find it, but I get asked for the WAP. When I put the password in, it 'times out'. Prior to the network problem my macbook worked fine everytime. Anyone know the answer?
My guess is all the issues are probably related and fall back to malware.
AVG is probably correct in identifying malware. So I suggest you try some cleaning tools other than Emsisoft .
ones I use (all of them one after the other until I find one that can cope) are;
Roguekiller http://www.adlice.com/softwares/roguekiller/
Malwarebytes anti malware Free http://www.malwarebytes.org/mwb-download/var2/confirm/
ESET online scanner http://www.eset.com/int/home/products/online-scanner/
So first create a clean boot in Windows using Microsoft's instructions https://support.microsoft.com/kb/929135?wa=wsignin1.0 and then run the anti malware applications.
My outside looking in guess is that malware has set itself up as an internet proxy and is is downloading copies of itself and other malware, blocking some mail port as times as downloading more malware is more important, and probably breaking your tivo as well..
Try the malware programs first. If that does not work I will try and talk you through some logging to see what is happening. -
TS1368 itunes cannot detect iphone due to the error 0xE8000012
itunes cannot detect iphone due to the error 0xE8000012
For windows read http://support.apple.com/kb/TS1538
For mac read http://support.apple.com/kb/ts1591 -
Hi,
I need some help with my script. It copies the file to the remote laptops but when it needs to install the .exe it fails.
If I run 1 line at the time in Powershell ISE, then it works. Somebody has an idea why it doesn't work or can help me on the right way?
Script:
$laptops = Get-Content -Path "C:\Users\bruyld01\Documents\STEPSTONE\Powershell\SAP\LaptopList.txt"
foreach ($laptop in $laptops)
Copy-Item "C:\Users\bruyld01\Desktop\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -Destination \\$laptop\C$\
Enter-PSSession $laptop
$version = Get-WmiObject -Class Win32_Product | where {$_.Name -like "*SAP Business*"} | Select-Object Version
if ($version -ne "135.0.2071.1047")
Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -ArgumentList "/quiet"
else
Write-Host "SAP outlook add-in is up to date!" -ForegroundColor Green
Exit-PSSession
Error message:
Start-Process : This command cannot be run due to the error: The system cannot find the file specified.
At line:2 char:1
+ Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [Start-Process], InvalidOperationException
+ FullyQualifiedErrorId : InvalidOperationException,Microsoft.PowerShell.Commands.StartProcessCommand
Thanks,
DimitriHi,
Enter-PSSession is used for interactive remote sessions. Look into Invoke-Command instead.
http://ss64.com/ps/invoke-command.html
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing) -
i just bought a macbook pro and the mountain lion free update applied correctly but the internet went down and now the download won't appear/ continue, and when i open the app store it requests me to pay for the update? what can i do?
Welcome to Apple Communities
http://www.apple.com/support/mac/app-store/contact -
Internet Explorer Branding failed due to the error listed below Server 2012 R2
After upgrading my AD and 1 DC of my two DC's to Server 2012 R2 I am seeing the error.
Internet Explorer Branding failed due to the error listed below.
The specified procedure could not be found.
This is because the Group policy "Internet Explorer Branding" is defined.
All discussion groups I have been able to find, suggest going onto the Windows 2008 R2 DC and use GPEDIT to remove this policy. Unfortunately, it does not appear where it should.
How do I delete it?
ThanksHi Paul S I,
Please notice that for managing IE10
with Group Policy Preferences you need
to use a Windows 8 or Server 2012 DC.
For proxy server
and proxy exception setting GPO setting, you can follow
below post in our team blog to move the policy to GPP.
How to apply IEM
to IE10
http://blogs.msdn.com/b/asiatech/archive/2013/07/01/how-to-apply-iem-to-ie10.aspx
In the windows 2008R2,
Internet Explorer 10 option won’t be displayed under the Preference->Control Panel Settings->
Internet Settings.
In addition, it would be helpful for further troubleshooting if you could collect the following information:
What version of IE that you are using? In the above solution, we suppose you are using IE10.
Could you provide the screenshort to provide detailed information?
Regards,
Lany Zhang -
hi,
i have Oracle 11G on linux enterprise rhel 5
i was runing a delete statement on a table and stopped it because it was taking too much time. after that i saw that the oracle instance was down.
i starteed it up and after some minutes it is going down again.
i even restarted the server and after reboot again down.
in the logs files it is show the following msg:
<attr name='IMPACT' value='POSSIBLE ROLLBACK SEGMENT CORRUPTION'/>
Errors in file /oracle/app/oracle/diag/rdbms/xxx/xxx/trace/xxx_smon_14333.trc (incident=74606):
ORA-00600: internal error code, arguments: [4142], [1835348594], [], [], [], [], [], [], [], [], [], []
and in the trace file
Trace file /oracle/app/oracle/diag/rdbms/xxx/xxx/trace/xxx_smon_14333.trc
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORACLE_HOME = /oracle/app/oracle/product/11.1.0/db_1
System name: Linux
Node name: xxx
Release: 2.6.18-128.el5
Version: #1 SMP Wed Jan 21 08:45:05 EST 2009
Machine: x86_64
Instance name: xxx
Redo thread mounted by this instance: 1
Oracle process number: 13
Unix process pid: 14333, image: oracle@xxx (SMON)
*** 2010-11-29 18:35:05.955
*** SESSION ID:(323.1) 2010-11-29 18:35:05.955
*** CLIENT ID:() 2010-11-29 18:35:05.955
*** SERVICE NAME:(SYS$BACKGROUND) 2010-11-29 18:35:05.955
*** MODULE NAME:() 2010-11-29 18:35:05.955
*** ACTION NAME:() 2010-11-29 18:35:05.955
Incident 74601 created, dump file: /oracle/app/oracle/diag/rdbms/xxx/xxx/incident/incdir_74601/xxx_smon_14333_i74601.trc
ORA-00600: internal error code, arguments: [25027], [2], [458753], [], [], [], [], [], [], [], [], []
Parallel Transaction recovery caught exception 12801
Parallel Transaction recovery caught error 600
SMON: Parallel transaction recovery slave got internal error
SMON: Downgrading transaction recovery to serial
KTUNDO: cannot find ts$ entry
SGAFRCWT: 4194304ORA-00600: internal error code, arguments: [4142], [1835348594], [], [], [], [], [], [], [], [], [], []ORA-00600/ORA-07445/ORA-03113 = Oracle bug => search on Metalink and/or call Oracle support
-
JMS Adapter Tuning in Oracle 10G SOA suite - Fixing the Errors
Hi All,
We are getting an error in Production environment while a BPEL process producing (enqueue) a message to a JMS queue by using JMS adapter. (partener link)
The error is as follows.
Adapter Framework unable to create outbound JCA connection.
file:/sw/appnew/product/SOA/10.1.3/bpel/domains/default/tmp/.bpel_CurrenListJMSProducer_1.0_4ec528ec93a8a6ff0278fab9701dcc71.tmp/CurrenListJMSProducerV1.wsdl [ Produce_Message_ptt::Produce_Message(OutputParameters) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: oracle.j2ee.connector.proxy.ProxyInterceptException: javax.resource.ResourceException: RollbackException: Transaction has been marked for rollback: null [Caused by: RollbackException: Transaction has been marked for rollback: null]
Please note that we are not getting this error every time, few BPEL instances are getting this error, around 3 out of 10 instances.
We are using Orcacle 10G SOA suite.
The BPEL process will take the messages from Oracle Apps adapter and send to the JMS queue, where we are getting error.
I can see in the BPEL.xml the "retryInterval" property set to '60' for both partner links (Apps adapter and JMS adapter).
But not set any other values. So,these values may be default.
We need to fix this issue soon.
I am requesting you all the Experts and Gurus, please let me know what can be done to fix this issue.
Thanks a lot in advance,
John.Hi All,.
Is there any work around for the above issue?
I tried all the below JMS tunings, but not no improvement.
<property name="useJCAConnectionPool">true</property>
<property name="maxSizeJCAConnectionPool">500</property>
<property name="retryMaxCount">10</property>
<property name="retryInterval">60</property>
Please let
me know if any other logs or any other information is required in order to analyse the issue.
Thanks,
John -
Oracle SQL developer 11g shows the error
While am trying to connect sql developer in 11g it shows like this
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
*32-bit Windows Error: 2: No such file or directory*
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=SKS)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
*32-bit Windows Error: 1001: Unknown error*
LSNRCTL>
Pls help me what to do?..Am new...Welcome to the forum.
You can easily look up the error messages in the Oracle Online Documentation @ http://www.oracle.com/pls/db112/homepage
Just enter the error code, and you'll get the cause and action, for example:
TNS-12545: Connect failed because target host or object does not exist
Cause: The address specified is not valid, or the program being connected to does not exist.
Action: Ensure the ADDRESS parameters have been entered correctly; the most likely incorrect parameter is the node name. Ensure that the executable for the server exists (perhaps "oracle" is missing.) If the protocol is TCP/IP, edit the TNSNAMES.ORA file to change the host name to a numeric IP address and try again.
It looks like you'll have to edit your tnsnames.ora, and also check if your listener is running. -
I've lost my Apps....Paid good Money for most...and my computer went down...my HD had to be replaced as well...so I am on a NEW HD...I was able to pay someone to pull my files...but I had to start from scratch with Win 7...I thought for sure since I use iCloud & I have my ID...that all would be well....but apparently NOT! More Crap from Apple....really shouldn't be this difficult guys for HONEST PAYING Customers! Someone...Anyone???
A manual backup before you sync for the first time will save your content to the new PC.
Apps and other media can be downloaded again for free:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Follow this user tip by wjosten to save your data and settings to a new PC:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
or this one by turningtest2:
Recovering your iTunes library from your iPod or iOS device -
Each time i want to unstall some addons for firefox (wot, personas..), a message wrote me that the install mode failed due to an error code 203.
What does it mean and how is it possible to repair it ?
== This happened ==
A few times a week
== i want to install addons for firefox (wot, personas and perhaps others)Locate/open your profile folder, close Firefox and follow the instructions to delete the files in the article below, when you restart Firefox, new/corrected files will be created in your Profile folder to replace the corrupted ones you deleted.
See: https://support.mozilla.com/en-US/kb/Unexpected+installation+error+-203+when+installing+add-ons
<u>'''''Other Issues'''''</u>: ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
<u>'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)'''</u>: your ver. 10.0 r45; current ver. 10.1 r53 ('''important security update 2010-06-10''')
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''<u>use Firefox to download</u>''' and <u>'''SAVE to your hard drive'''</u> (save to Desktop for easy access)
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*<u>'''NOTE: On Vista and Windows 7'''</u> you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''<u>NOTE for IE:</u>''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer.
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]] -
Premiere Elements 9, Closing down due to serious error?
Premiere Elements 9, receiveing "sorry, a serious error has occurred that required Adobe Premiere Elements to shut down" all day. What is going on?
jrhalphen
Thanks for the reply
What computer antivirus program do you use? Please remind me if you have disabled the antivirus and if doing that has any affect on the problem.
You wrote
When Premiere opens it says get latest Inspiration Browser, should I do
that, too?
Just ignore that message and cancel out of it and any other messages encouraging you to Sign In. The photoshop.com feature has been discontinued but those detouring messages persist. We can talk about video and pdf tutorials once you get the program to open properly and it is prepared for work.
You wrote
Have media stored on file in desktop. Cannot open anything in Premiere to
"save to Premiere."
That should be temporary until we get the program to work. Keeping the media there instead an external hard drive keeps external hard drive out of the troubleshooting equation. You will import your source media with the project's Get Media/Files and Folders and drag it to the Timeline. The media that are in the project are just copies of the originals that need to trace back to the originals on the hard drive.
You wrote
I can open Premiere and click new project MY PROJECT, nothing happens. If
I change name of project to something else that is when I get the error
message that Premiere has to close, I still get that message. I cannot
get anything into Premiere or get any thing to open such as get files, etc
and
My computer says I have new version installed.
What is this new version installed - are you referring to the video card/graphics card driver version?
If so, then as John has suggested, go to the web site of the manufacturer of your card and check there to determine if you have the lastest version of the driver. If you do, then we delete the BadDrivers.txt file.
Local Disk C
Program Data
Adobe
Premiere Elements
9.0
and in the 9.0 Folder is the BadDrivers.txt file that you delete. After you do that and open a project, the program will generated a new BadDrivers.txt file and hopefully the program will be gone. Make sure that you are working with Folder Option Show Hidden Files, Folders, and Drives active so you can see the path.
If we are left with the same problem after all that
First. Delete the Adobe Premiere Elements Prefs file.
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
9.0
and in the 9.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then you delete the whole 9.0 Folder in which the Adobe Premiere Elements Prefs file exists.
If that does not work, then next go for
Deactivation (which is not possible if you cannot open a project) ... so bypass that step
Uninstall, the usual Control Panel/Installed Programs route
ccleaner (regular cleaner and registry cleaner parts) to get rid of leftovers from incomplete uninstalls and/or installs.
http://www.piriform.com/ccleaner
Reinstall with anti-virus and firewalls turned off.
After the program is installed, then install the 9.0.1 Update.
If none of the above works, then try installing and opening Premiere Elements 9.0/9.0.1 from a new User Account with Administrative Privileges.
Please review and try in the order mentioned. We will be watching for your results. If you need any clarification before you begin, please let us know.
Thanks.
ATR -
Query not opening due to the error in Calculated Key Figures
Hi Guys
I have created 10 CKFs based on the replacement path type of formula variable using the attibutes of the charectistic Info Object which has been added to the cube.
I am getting the error to open the query while executing it with some of the 10 CKFs is u201C Value '' is invalid for property 'Dimensions' of element 'Formula variable for calculation of Score for Potentialsu2019u201D
My question here is : Why should we get the error only for some attributes and other are working fine from the same charectistic. Will there be a problem with the master data object/dimension or problem in the variable definition.
Any help will be appriciated.
Thanks
MurthyHi Edwin,
I put the field in include ZRSRZTOP and now it works.
I really appreciate your help,
thanks
Ricardo
Maybe you are looking for
-
I have used Firefox and outlook for years, but this is a recent problem. I can't recall if it started after the latest Firefox update or not. Firefox seems to work fine until I open Outlook. Then it is impossible to load any pages; the loading icon a
-
Can an iMac be used as a monitor for a Mac Pro?
Hi all, I'm getting nowhere looking in the search, so I'm hoping someone can clear something up for me: is it possible to use an iMac as a display for a Mac Pro? I am beginning to think I'd better get a Mac Pro, but I already have an iMac, for which
-
What video cable needed to hook up roku to a 2005 Sony plasma
My 2005 Sony plasma does not have a hdmi plug, looks like the old computer type plug with the screw on each end of the connection. Having difficulty hooking up a streaming device
-
So how to explain this as best as possible.... First off, I have seen this "issue" since ConfigMgr 2012 RTM and I have seen it continuously through the various upgrades done on the way to ConfigMgr 2012 R2. The environment consists of a single AD dom
-
Hi, I have some Webi 3.1 reports that were migrated to 4.1 that are not working correctly. The report pulls from two universes, there are merged dimensions, a break in the reports and ranking within each break. The 3.1 report works fine. In the 4.