Orclpassword attributes lost when changing password

Hi
When using Apache Directory Studio to change the user password, many of the orclpassword attributes are lost?

When userpassword is provided in plain text the orclPassword should get updated.
If userpassword is hashed when modified, the update of orclPassword will fail.
Apache Directory Studio will use hash method SHA by default when changing password.
Make sure hash method plainText is selected.
orclPassword is an EUS/database password identifier for custom authentication schemes like O3Logon for the database server. orclPassword cannot be changed directly, but is indirectly updated by the OID engine itself when userpassword is updated.

Similar Messages

Unable to login when change password option is enabled

Hi,
I have configured remote vpn on my Cisco ASA and users connecting to this will use Cisco VPN dialer and gets authenticated with the Windows 2008 domain controller credentials. Now the problem I face is, when i set the option for user-A as "user must change the password during next login" it doesn't accept , it accepts only when I uncheck only then the user-A will be able to login.
Any ideas what option or configuration do I to do so that it can popoup for changing the password?
FYI I use windows 7 profession edition with Cisco VPN dialer client ver. 5.0.04.0300. I am unable to find "windows logon properties" under the "options" menu.

Hi,
I managed to get the password change option pop-up when "Change password during next login" set for for the user-A in windows 2008 Active Directory. But now the issue is, I enter the old password, it accepts & then its pops up to enter me the new password twice, when I enter the new password with some special charecters it stills pops me up to enter the new password with special charecters. After 2-3 attempts it disconnects. It will allow me to connect only when I un-check the "change password during next login"
Any ideas?

Error when changing password of NW J2ee's secure store and Oracle sqlplus

Hi all,
I am wondering on the following:
Current setting:
I have "old_password" for J2ee configtool's secure store.
I have "old_password" for Oracle's sapsr2 user inside Sqlplus.
When I change the password for all 3 place from "old_password" to "new_password", I am not able to connect to configtool. I am also not able to start the Portal service; with logfile error "invalid user/password"
If I change the password back to "old_password", I can connect to configtool as well as start the service.
Snote and forumers (google) mention that update configtool's secure store and "alter user sapsr3" for Oracle database is all I need to change password.
Have I miss out some step in order to change the password for my Enterprise Portal?
Thank you.
Regards

edit: never mind, found the meaning of SDM.
but the command below, is it usable?
For Windows OS:
Open a command prompt and navigate to the folder <Drive>:\usr\sap\DP1\JC21\SDM\program
Execute the below commands:
sdm jstartup "mode=standalone"
sdm changepassword "newpassword=<Enterthenewpassword>"
sdm jstartup "mode=integrated"
StartServer.bat
Edited by: Sek Yao Ooi on Dec 7, 2009 9:21 AM

User accounts locked when changing password

I have tried searching an answer to this for a while but have not found an answer yet. So have decided to see if anyone can shed some light on it.
Basic issue is that a user changes their password on their client machine which then locks their Open Directory account so can not login.
Users authenticate against the Open Directory hosted on a 10.5.8 server. Clients are 10.6.8. No I can not update servers to 10.6 as I only have one licensed copy of it. I syncronise RAID data between the two using PresStore. File sizes are not seen as being the same between OSs so complete backup made each time, not just the changes. Not ready for Lion or Mountain Lion server as I am within a very restrictive environment behind proxy servers, still testing and ironing out issues.
Clients are mobile users and the whole user area is synced on Login, Log out and every three hours when logged in. Fundamentally Mobile accounts work great, except when it comes to changing the password. When doing this the logout sync does not connect and then during the next login the account is locked. Even when unlocking the account it says the account is locked, appearing like a conflict between the local machine and open directory. Home folder is still on client machine.
The only way to remedy this is to delete the user plist through ARD and terminal command run as root
rm /var/db//dslocal/nodes/Default/users/usershortname.plist
Once this is done the user can then log in and it does a full sync.
DNS resolves fine, browsing and connecting to AFP shares is fine (although will not connect to the home directory on logout sync after the password change when shutting down. User can before this point stay connected to the shared volumes, save and work from them but can not automitically connect to the home folder share)
Just don't quite not know where to go now...

Please refer below link on same topic, i hope you will get your answer.
http://cn.forums.oracle.com/forums/thread.jspa?threadID=2172418&tstart=0&start=15

Special character when changing password in sql plus

Hi i'm having a problem with setting password for user's in sql plus. I get a ORA-00922 whenever I try to change a user's password to contain ! in it. See below. Do I have to escape special characters or something or this a bug?
(Previously I've always used Enterprise Manager for this and can set ! characters for password without issue but we're currently having an issue with it and I need to alter passwords in sql plus while I'm waiting for it to be fixed )
SQL> alter user lbtest identified by oraclesux!;
alter user lbtest identified by oraclesux!
ERROR at line 1:
ORA-00922: missing or invalid option
SQL> alter user lbtest identified by oraclesux;
User altered.
System and O/S details below:
O/S = MS Server 2008 Standard Service Pack 1 64 bit
Oracle 11g Standard Edition (11.1.0.7.0)
SQL> select * from nls_database_parameters;
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET WE8MSWIN1252
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
PARAMETER VALUE
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 11.1.0.7.0
20 rows selected.

Found the answer here, must user double quote for exclamation marks but not other characters like #.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:897930000346894755

All saved credentials get deleted from Credential Manager when changing password

We have Windows 7 computers that are joined to domain. Credential Manager does its job but whenever users change their AD user password, it deletes all saved credentials. does anyone know why this is happening?

This may casued by group policies?
Check with your system admin and see if there are any task schedulers that make the password change a trigger to clean all the saved credentials.
Normally it should just saved the changed information according to the special user account. Werid thing.
Rgds

Pam.conf does not use ldap for password length check when changing passwd

I have already posted this in the directory server forum but since it is to do with pam not using ldap I thought there might be some pam experts who check this forum.
I have dsee 6.0 installed on a solaris 10 server (client).
I have a solaris 9 server (server) set up to use ldap authentication.
bash-2.05# cat /var/ldap/ldap_client_file
# Do not edit this file manually; your changes will be lost.Please use ldapclient (1M) instead.
NS_LDAP_FILE_VERSION= 2.0
NS_LDAP_SERVERS= X, Y
NS_LDAP_SEARCH_BASEDN= dc=A,dc= B,dc= C
NS_LDAP_AUTH= tls:simple
NS_LDAP_SEARCH_REF= FALSE
NS_LDAP_SEARCH_SCOPE= one
NS_LDAP_SEARCH_TIME= 30
NS_LDAP_SERVER_PREF= X.A.B.C, Y.A.B.C
NS_LDAP_CACHETTL= 43200
NS_LDAP_PROFILE= tls_profile
NS_LDAP_CREDENTIAL_LEVEL= proxy
NS_LDAP_SERVICE_SEARCH_DESC= passwd:ou=People,dc=A,dc=B,dc=com?one
NS_LDAP_SERVICE_SEARCH_DESC= group:ou=People,dc=A,dc=B,dc=C?one
NS_LDAP_SERVICE_SEARCH_DESC= shadow:ou=People,dc=A,dc=B,dc=C?one
NS_LDAP_BIND_TIME= 10
bash-2.05# cat /var/ldap/ldap_client_cred
# Do not edit this file manually; your changes will be lost.Please use ldapclient (1M) instead.
NS_LDAP_BINDDN= cn=proxyagent,ou=profile,dc=A,dc=B,dc=C
NS_LDAP_BINDPASSWD= {NS1}6ff7353e346f87a7
bash-2.05# cat /etc/nsswitch.conf
# /etc/nsswitch.ldap:
# An example file that could be copied over to /etc/nsswitch.conf; it
# uses LDAP in conjunction with files.
# "hosts:" and "services:" in this file are used only if the
# /etc/netconfig file has a "-" for nametoaddr_libs of "inet" transports.
# the following two lines obviate the "+" entry in /etc/passwd and /etc/group.
passwd: files ldap
group: files ldap
# consult /etc "files" only if ldap is down.
hosts: files dns
ipnodes: files
# Uncomment the following line and comment out the above to resolve
# both IPv4 and IPv6 addresses from the ipnodes databases. Note that
# IPv4 addresses are searched in all of the ipnodes databases before
# searching the hosts databases. Before turning this option on, consult
# the Network Administration Guide for more details on using IPv6.
#ipnodes: ldap [NOTFOUND=return] files
networks: files
protocols: files
rpc: files
ethers: files
netmasks: files
bootparams: files
publickey: files
netgroup: ldap
automount: files ldap
aliases: files ldap
# for efficient getservbyname() avoid ldap
services: files ldap
sendmailvars: files
printers: user files ldap
auth_attr: files ldap
prof_attr: files ldap
project: files ldap
bash-2.05# cat /etc/pam.conf
#ident "@(#)pam.conf 1.20 02/01/23 SMI"
# Copyright 1996-2002 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
# PAM configuration
# Unless explicitly defined, all services use the modules
# defined in the "other" section.
# Modules are defined with relative pathnames, i.e., they are
# relative to /usr/lib/security/$ISA. Absolute path names, as
# present in this file in previous releases are still acceptable.
# Authentication management
# login service (explicit because of pam_dial_auth)
login auth requisite pam_authtok_get.so.1 debug
login auth required pam_dhkeys.so.1 debug
login auth required pam_dial_auth.so.1 debug
login auth binding pam_unix_auth.so.1 server_policy debug
login auth required pam_ldap.so.1 use_first_pass debug
# rlogin service (explicit because of pam_rhost_auth)
rlogin auth sufficient pam_rhosts_auth.so.1
rlogin auth requisite pam_authtok_get.so.1
rlogin auth required pam_dhkeys.so.1
rlogin auth binding pam_unix_auth.so.1 server_policy
rlogin auth required pam_ldap.so.1 use_first_pass
# rsh service (explicit because of pam_rhost_auth,
# and pam_unix_auth for meaningful pam_setcred)
rsh auth sufficient pam_rhosts_auth.so.1
rsh auth required pam_unix_auth.so.1
# PPP service (explicit because of pam_dial_auth)
ppp auth requisite pam_authtok_get.so.1
ppp auth required pam_dhkeys.so.1
ppp auth required pam_dial_auth.so.1
ppp auth binding pam_unix_auth.so.1 server_policy
ppp auth required pam_ldap.so.1 use_first_pass
# Default definitions for Authentication management
# Used when service name is not explicitly mentioned for authenctication
other auth requisite pam_authtok_get.so.1 debug
other auth required pam_dhkeys.so.1 debug
other auth binding pam_unix_auth.so.1 server_policy debug
other auth required pam_ldap.so.1 use_first_pass debug
# passwd command (explicit because of a different authentication module)
passwd auth binding pam_passwd_auth.so.1 server_policy debug
passwd auth required pam_ldap.so.1 use_first_pass debug
# cron service (explicit because of non-usage of pam_roles.so.1)
cron account required pam_projects.so.1
cron account required pam_unix_account.so.1
# Default definition for Account management
# Used when service name is not explicitly mentioned for account management
other account requisite pam_roles.so.1 debug
other account required pam_projects.so.1 debug
other account binding pam_unix_account.so.1 server_policy debug
other account required pam_ldap.so.1 no_pass debug
# Default definition for Session management
# Used when service name is not explicitly mentioned for session management
other session required pam_unix_session.so.1
# Default definition for Password management
# Used when service name is not explicitly mentioned for password management
other password required pam_dhkeys.so.1 debug
other password requisite pam_authtok_get.so.1 debug
other password requisite pam_authtok_check.so.1 debug
other password required pam_authtok_store.so.1 server_policy debug
# Support for Kerberos V5 authentication (uncomment to use Kerberos)
#rlogin auth optional pam_krb5.so.1 try_first_pass
#login auth optional pam_krb5.so.1 try_first_pass
#other auth optional pam_krb5.so.1 try_first_pass
#cron account optional pam_krb5.so.1
#other account optional pam_krb5.so.1
#other session optional pam_krb5.so.1
#other password optional pam_krb5.so.1 try_first_pass
I can ssh into client with user VV which does not exist locally but exists in the directory server. This is from /var/adm/messages on the ldap client):
May 17 15:25:07 client sshd[26956]: [ID 634615 auth.debug] pam_authtok_get:pam_sm_authenticate: flags = 0
May 17 15:25:11 client sshd[26956]: [ID 896952 auth.debug] pam_unix_auth: entering pam_sm_authenticate()
May 17 15:25:11 client sshd[26956]: [ID 285619 auth.debug] ldap pam_sm_authenticate(sshd VV), flags = 0
May 17 15:25:11 client sshd[26956]: [ID 509786 auth.debug] roles pam_sm_authenticate, service = sshd user = VV ruser = not set rhost = h.A.B.C
May 17 15:25:11 client sshd[26956]: [ID 579461 auth.debug] pam_unix_account: entering pam_sm_acct_mgmt()
May 17 15:25:11 client sshd[26956]: [ID 724664 auth.debug] pam_ldap pam_sm_acct_mgmt: illegal option no_pass
May 17 15:25:11 client sshd[26956]: [ID 100510 auth.debug] ldap pam_sm_acct_mgmt(VV), flags = 0
May 17 15:25:11 client sshd[26953]: [ID 800047 auth.info] Accepted keyboard-interactive/pam for VV from 10.115.1.251 port 2703 ssh2
May 17 15:25:11 client sshd[26953]: [ID 914923 auth.debug] pam_dhkeys: no valid mechs found. Trying AUTH_DES.
May 17 15:25:11 client sshd[26953]: [ID 499478 auth.debug] pam_dhkeys: get_and_set_seckey: could not get secret key for keytype 192-0
May 17 15:25:11 client sshd[26953]: [ID 507889 auth.debug] pam_dhkeys: mech key totals:
May 17 15:25:11 client sshd[26953]: [ID 991756 auth.debug] pam_dhkeys: 0 valid mechanism(s)
May 17 15:25:11 client sshd[26953]: [ID 898160 auth.debug] pam_dhkeys: 0 secret key(s) retrieved
May 17 15:25:11 client sshd[26953]: [ID 403608 auth.debug] pam_dhkeys: 0 passwd decrypt successes
May 17 15:25:11 client sshd[26953]: [ID 327308 auth.debug] pam_dhkeys: 0 secret key(s) set
May 17 15:25:11 client sshd[26958]: [ID 965073 auth.debug] pam_dhkeys: cred reinit/refresh ignored
If I try to then change the password with the `passwd` command it does not use the password policy on the directory server but the default defined in /etc/default/passwd
bash-2.05$ passwd
passwd: Changing password for VV
Enter existing login password:
New Password:
passwd: Password too short - must be at least 8 characters.
Please try again
May 17 15:26:17 client passwd[27014]: [ID 285619 user.debug] ldap pam_sm_authenticate(passwd VV), flags = 0
May 17 15:26:17 client passwd[27014]: [ID 509786 user.debug] roles pam_sm_authenticate, service = passwd user = VV ruser = not set rhost = not set
May 17 15:26:17 client passwd[27014]: [ID 579461 user.debug] pam_unix_account: entering pam_sm_acct_mgmt()
May 17 15:26:17 client passwd[27014]: [ID 724664 user.debug] pam_ldap pam_sm_acct_mgmt: illegal option no_pass
May 17 15:26:17 client passwd[27014]: [ID 100510 user.debug] ldap pam_sm_acct_mgmt(VV), flags = 80000000
May 17 15:26:17 client passwd[27014]: [ID 985558 user.debug] pam_dhkeys: entered pam_sm_chauthtok()
May 17 15:26:17 client passwd[27014]: [ID 988707 user.debug] read_authtok: Copied AUTHTOK to OLDAUTHTOK
May 17 15:26:20 client passwd[27014]: [ID 558286 user.debug] pam_authtok_check: pam_sm_chauthok called
May 17 15:26:20 client passwd[27014]: [ID 271931 user.debug] pam_authtok_check: minimum length from /etc/default/passwd: 8
May 17 15:26:20 client passwd[27014]: [ID 985558 user.debug] pam_dhkeys: entered pam_sm_chauthtok()
May 17 15:26:20 client passwd[27014]: [ID 417489 user.debug] pam_dhkeys: OLDRPCPASS already set
I am using the default policy on the directory server which states a minimum password length of 6 characters.
server:root:LDAP_Master:/var/opt/SUNWdsee/dscc6/dcc/ads/ldif#dsconf get-server-prop -h server -p 389|grep ^pwd-
pwd-accept-hashed-pwd-enabled : N/A
pwd-check-enabled : off
pwd-compat-mode : DS6-mode
pwd-expire-no-warning-enabled : on
pwd-expire-warning-delay : 1d
pwd-failure-count-interval : 10m
pwd-grace-login-limit : disabled
pwd-keep-last-auth-time-enabled : off
pwd-lockout-duration : disabled
pwd-lockout-enabled : off
pwd-lockout-repl-priority-enabled : on
pwd-max-age : disabled
pwd-max-failure-count : 3
pwd-max-history-count : disabled
pwd-min-age : disabled
pwd-min-length : 6
pwd-mod-gen-length : 6
pwd-must-change-enabled : off
pwd-root-dn-bypass-enabled : off
pwd-safe-modify-enabled : off
pwd-storage-scheme : CRYPT
pwd-strong-check-dictionary-path : /opt/SUNWdsee/ds6/plugins/words-english-big.txt
pwd-strong-check-enabled : off
pwd-strong-check-require-charset : lower
pwd-strong-check-require-charset : upper
pwd-strong-check-require-charset : digit
pwd-strong-check-require-charset : special
pwd-supported-storage-scheme : CRYPT
pwd-supported-storage-scheme : SHA
pwd-supported-storage-scheme : SSHA
pwd-supported-storage-scheme : NS-MTA-MD5
pwd-supported-storage-scheme : CLEAR
pwd-user-change-enabled : off
Whereas /etc/default/passwd on the ldap client says passwords must be 8 characters. This is seen with the pam_authtok_check: minimum length from /etc/default/passwd: 8
. It is clearly not using the policy from the directory server but checking locally. So I can login ok using the ldap server for authentication but when I try to change the password it does not use the policy from the server which says I only need a minimum lenght of 6 characters.
I have read that pam_ldap is only supported for directory server 5.2. Because I am running ds6 and with password compatability in ds6 mode maybe this is my problem. Does anyone know of any updated pam_ldap modules for solaris 9?
Edited by: ericduggan on Sep 8, 2008 5:30 AM

you can try passwd -r ldap for changing the ldap passwds...

UME change password in LDAP when this has expired

Hello,
I've configured SAP EP 2004 SP18, ume datasource is LDAP Active Directory, with SSL, and as administrator I can reset the password.
The problem appears when password is expired and the flag "user must change password" is marked in Active Directory and in the portal dosen't appear the form to the user to change the password.
If you read in ADS attribute "pwdLastSet" when is "0" means that the user must change password, I'm trying to map this attribute to ume attribute "passwordchangerequired", but it's not working, also are different formats.
The result is that in the portal login is not appearing the form to change the password when it's necesary, any ideas to map this active directory password or workaround...
Very thanks in advance.
Xavi.

same problem here ........ Iv'e set the UME expire date, and this works (kind of). The problem is that if both the Active Directory AND the UME are set to expire at 30 days, when the user logs on to the network on the 30th day, he is prompted to change his network password. Then as soon as he tries to log on to the portal he is prompted again (since the portal/ume doesnt know that the password has been changed in the active directory data source).
The user is prompted 2 times to change his password, and this is obviously confusing. And now his network password is different that what he just changed it to (since the portal / ume pw change changes the Act Dir password).
Any suggestions?
Thanks.

Configuration changes lost when turn off

Every change I do in preferences for Finder or any other application get lost when I turn off the Mac.
I haver cehcked and repair de disk privileges.
Operating system is Lion
Anybody can help?
Cheers

Only the old fashioned way, like if you lost a wallet or purse.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have to iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

ITunes is updated and works fine and I am able to log onto my account. When I go to purchase a song, I get the error message "Your Apple ID has been disabled". I've tried different methods: changing passwords, making a new account with another email addre

iTunes is updated and works fine and I am able to log onto my account. When I go to purchase a song, I get the error message "Your Apple ID has been disabled". I've tried different methods: changing passwords, making a new account with another email address, and emailing itunes tech support. I am curious as to how many others have been experiencing the same issue. When I googled the error, it seemed like it was happening extremely often with many people.
We all love their products, but they always come with a lot of issues and horrible customer support.
My apple Id is [email protected]

My Iphone 4 is telling me the same thing and I believe I figured out what the problem is. I had some fraudulent charges on my itunes account, so I call my bank and disputed the charges. Right after I did that, I started getting the message "Your apple ID has been disabled." I just realized today that the charges are not fraudulent, they are "in app purchases." One of my daughters downloaded the game Top Girl which is FREE, but in the game Top Girl you use money in the game to purchase things. It just so happens that the money you use to purchase things is real money MY Money!!!. My daughter thought she was using play money in the game and had no idea she was using real money. She spent $106.00 buying stuff. Now I have to call the bank and tell them to release the hold and pay Itunes. I'm hoping this solves the problem. Here is the link to learn how to disable "in app purchase" on your iphone or ipad.
http://www.ikidapps.com/2010/12/parents-avoid-accidental-app-purchases-how-to-tu rn-off-in-app-purchasing.html

I am getting a Changing Password Failed error when I try to join an active directory

I had a working AD configuration under Snow Leopard. When I upgraded to Mountain Lion, my account was no longer in sync with the domain. I got the red dot on the login screen and my domain password was out of sync. I unhooked from the domain at that point. This was several months ago.
However, over the last few weeks, I keep finding myself locked out of the domain. I suspect it's something on my Mac that is trying to use my old credentials. I was hoping to rejoin the domain and see if I could get my account back in sync. When I get a domain admin to enter his password on the Directory Utility join screen, it first notes that the computer account already exists in the domain. I tell it to continue, but I can't get past this point:
2013-06-24 14:21:20.729935 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - Computer account either already exists or DC is already Read/Write
2013-06-24 14:21:20.732774 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - existing record found 'CN=MYMACHINE,OU=Default,OU=Workstations,OU=MyCity,OU=North America,DC=GLOBAL,DC=OURCORP,DC=NET'
2013-06-24 14:21:20.732822 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - switching to cache 'MEMORY:0x7faef36ed770'
2013-06-24 14:21:20.733141 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm GLOBAL.OURCORP.NET flags 2
2013-06-24 14:21:20.734196 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 12
2013-06-24 14:21:20.734221 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 10.22.94.212:kerberos (1.2.3.4)
2013-06-24 14:21:20.741380 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 10.22.94.212:kerberos (1.2.3.4)
2013-06-24 14:21:20.741416 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context done: 0
2013-06-24 14:21:20.741619 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - trying to set password
2013-06-24 14:21:20.741637 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - trying to set password using: MS set password in realm GLOBAL.OURCORP.NET
2013-06-24 14:21:20.741648 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - using TCP since the ticket is large: 1560
2013-06-24 14:21:20.741665 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service change_password for realm GLOBAL.OURCORP.NET flags 2
2013-06-24 14:21:20.742867 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 12
2013-06-24 14:21:20.742908 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 10.22.94.212:kpasswd (1.2.3.4)
2013-06-24 14:21:20.745231 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 10.22.94.212:kpasswd (1.2.3.4)
2013-06-24 14:21:20.745250 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context done: 0
2013-06-24 14:21:20.745398 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - set password using MS set password returned: 0 result_code 3
2013-06-24 14:21:20.745417 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Changing password failed for '[email protected]' with error '' (3)
2013-06-24 14:21:20.745426 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - setting Computer Password FAILED for existing record - 5103
2013-06-24 14:21:20.745818 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - ODNodeCustomCall failed with error 'Credential operation failed' (5103)

Reggierror,
Had the same issue and discovered that I made my AD object name too long (16 instead of 15 character which is the limit) You might want to try making the computer object name shorter if you can.

How to find the when the password is changed for a system User

Hi to all,
We have a test database where our application connects to system user. The application runs more than a month without any issues, But suddenly my system and sys password gets changed. I wonder how this would happen. I have checked with DBA_USERS to check whether the account gets locked, But the account is in the Open state.
I need to find out when the password gets changed for these users and who changed it? Is there any possible to trace it or we need to enable the auditing to find it in future.
Kindly let me know the possible ways.
Regards,
Vijayaraghavan K

Vijayaraghavan Krishnan wrote:
Hi to all,
We have a test database where our application connects to system user. The application runs more than a month without any issues, But suddenly my system and sys password gets changed. I wonder how this would happen. I have checked with DBA_USERS to check whether the account gets locked, But the account is in the Open state.
I need to find out when the password gets changed for these users and who changed it? Is there any possible to trace it or we need to enable the auditing to find it in future.
Kindly let me know the possible ways.
Regards,
Vijayaraghavan KThe only way to implement an Oracle Audit

I lost my restrictions password and want to reset my ipod so i can put a new one on, when i try reset it it makes me put in my device password and restrictions password! How can i reset my ipod if i need the restrictions password why i am resetimg my

I lost my restrictions password and want to reset my ipod so i can put a new one on, when i try reset it it makes me put in my device password and restrictions password! How can i reset my ipod if i need the restrictions password which is why i am resetimg my. Ipod

Forgotten RESTRICTIONS Passcode
- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored. Place the iOS device in Recovery Mode if necessary to allow the restore.
- Restore to factory settings/new iPod. . Place the iOS device in Recovery Mode if necessary to allow the restore.
- If you are up to file manipulation see the following but it may not work for iOS 6.1.3 or iOS 7
How to reset forgotten Restrictions...: Apple Support Communities
- How to Recover Restrictions Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog

Why do we get First operand...error message when trying to change password

Hi
I'm new at posting here, so sorry if I'm doing this wrong. I did search first to see if there was info on this already, but I didn't find anything. (If there is already something out there, please point me to it.)
We are using PeopleSoft Financials 8.8 SP1.
We have basic workflow enabled in expenses which generates an email to an approver with a link into PS Expenses (right to their worklist area) when they have an expense report to review. When the user clicks the link they are directed to the PS sign on page. Normally they can sign on without any problems. However, if their password has expried they will be redirected to a page which says "Your password has expired. Click here to change your password." When they click the link they recieve a blank page with an error message that starts out as "First operand of. is NULL, ".
I cannot replicate it in our test environments.
I have confirmed that we have the PSWDEXPR permission list in our environment.
I have also confirmed that our template for Change Expired Password is correct (PeopleTools > Portal, Structure & Content > Folder, "Tools - Hidden" > Change Expired Password > Template is PRTL_TEMPLATE_PASSWORD_EXP)
I have also tried changing our brower cache to 0. (PeopleTools >Personalization >Personalization Options > Option Category Level = PeopleTools, Format tab, User Option of METAXP. I changed METAXP to 0 instead of 900 which was set by default).
The odd thing is that if the user waits one day, they can use the link in the expense workflow email and change their password no problem.
Also, when our users do experience this problem, if they log into PeopleSoft without using the link from the expense workflow email the change password function works fine.
The link seems to be okay since it works fine at all times unless the user is prompted to change their password.
Any suggestions?

Try the troubleshooting tips here:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
You may have something in your project on one of the slides that is tripping up the publishing process.

Exchange 2010 users cant change password in OWA when Cas server is Exchange 2013 cu3

Running Exchange 2010 and 2013 in mixed mode. users who is still on Exchange 2010 cant change password in OWA. It worked when it was clean Exchange 2010 installation. Password change is working for users migrated to 2013
LS

Hi
Please follow the below blog which will help you in solving this issue
http://technet.microsoft.com/en-us/library/bb684904.aspx
Note: Be careful while modifying the registry settings.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you.
Regards,
Sathish

Orclpassword attributes lost when changing password

Similar Messages

Maybe you are looking for