Order for installation?

Unsure of what order to tackle this installation issue: husband and I have an older iMac with CS4 Creative Suite Design Standard installed on it. (He was a student when we installed it originally so we qualified for the student version, but I have read that we retain upgrade rights to a commercial version even now when he is no longer a student). We purchased the upgrade to CS5.5 recently enough that we qualify for the free upgrade to CS6, but we also bought a new MacBook Pro this weekend. Since we don't get the free upgrade to CS6 for 10 days, I want to go ahead and install CS5.5 on the MacBook Pro now because it has nothing on it. Do I need to install CS4 on the laptop first or can the upgrades run independently when you install them on a fresh machine? And will there be an issue trying to install CS6 on both a laptop and a desktop? Only one computer will be using the software at a time. Also, we own Lightroom 4, but since we have the new Canon Mark III camera, we need to use the beta 4.1 or 4.2 versions of Lightroom. Can they be installed on their own or do I have to first install the original CS4 version?

SaltyRavenStudio wrote:
...no serial numbers were ever requested! What does this mean? Are release candidate versions the real thing? Why would they be available for downloading without proof of purchase? Will any work I do using the release candidate be saved once the next version is official? I am trying to avoid a million copies of the program cluttering my drive and creating communication issues.
Beta's are free to the public for a specific time in my experience. Once you get the official upgrade, all your edits will carry over without a problem.

Similar Messages

  • How can I order an installation CD for my PIXMA MP495

    How can I order a installation CD for my PIXMA MP495?

    Hello printartist74.
    If the CD is not available, you can download the latest drivers and software from our website at the following link:
    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp495#Dr...
    For information on the disk, please contact our support group using the "Contact Us" link below.
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Blocking creation of meter reading order for perticular installation

    Hi,
    I want to block creation of meter reading order for perticular installation within an MRU.
    This meter is disconnected in the installation.
    My requirement is if i create meter reading orders for  MRU it should not create MR oder for some installtions.
    your input on the same will be highly helpful.
    Thanks in advance.
    Regards,
    chetan

    Hi,
    Use Blocking Reason in ES31 (installation: Billing/Meter Reading control Tab)...During meter reading order creation, prevents meter reading orders from being created for the registers allocated to the installation.

  • Do anyone knows drivers installation order for Satellite A660-11M

    Do anyone knows the drivers installation order for Satellite a660-11m?
    I've got some issue installing Win 7 pro (wlan do not work properly,
    freezing few minutes after laptop startup, unabling to run CHKDSK on C:).
    Reading this forum it seems to me these aren't new issues for Toshiba users.

    Hi, friends.
    I've installed the the Flash Card Support Utility. In effect, now the function keys work. ;) <img class="emoticon" border="0" alt="" />
    Unfortunately it seems that problems are hard to die. The Laptop, in fact, keeps freezing, tipically but not exclusively, after resuming from suspension due to lid closing. System can stucks during windows login or after a while that user is logged on.
    During these days i've discovered that SPTD.exe x64 v.1.74 (Daemon Tools) and Nod32 x64 makes impossible launching chkdsk on %SystemDrive% (countdown stucked on 1 and hdd led blinked with very short ON state). However, even without installing those, it seems that one is not able to break the countdown (that windows shows before it starts chkdsk) pressing a key.
    But maybe I should open a new topic for talcking about this.

  • Satellite L670 - Is there any driver installation order for the Win XP

    Hi!
    I own a Toshiba satellite L670 model.
    I want to install Windows XP (32 bit) and i wanted to ask if there is an installation order for the laptop drivers (which goes first , second etc) after the Windows Installation. I can't find anythink about it from Toshiba Corp.
    Thanks in advance!

    Well, usually you should proceeds with the common drivers like graphic card driver, chipset driver, LAN, WLan driver, touchpad driver, card reader controller, etc
    After that I recommend following with Toshiba software like Controls driver, Controls, Hotkey Utility, Power Saver Driver, Power Saver, etc
    On the right you can find More Info. There you will find details about each driver, software
    Greets

  • Tecra A10 - Installation order for XP

    Hey All,
    I'm looking for an install order for the Tecra A10 for 32bit Windows XP Pro. Am doing a clean install for an image and want to get it right.
    Any help would be grand.
    Cheers,
    Dave

    Hi Dave
    You should install WXP and all Toshiba stuff following this installations order:
    Windows XP Professional SP3
    Intel(R) Chipset Software Installation Utility
    Intel(R) Matrix Storage Manager(iMSM)
    Intel Cantiga Vista Display Driver
    or
    NVIDIA NB9x Vista Display Driver
    Realtek HD Audio Driver
    TOSHIBA Common Modules
    TOSHIBA Mic Effect
    ALPS Pointing-device Driver
    TOSHIBA Dual Pointing Device Utility
    TouchPad OnOff Utility
    TOSHIBA Software Modem
    Intel internal LAN Driver
    Intel(R) AMT Management Engine Interface AMT4001089BC
    Intel Wireless LAN Driver
    Atheros Wireless LAN Driver
    Bluetooth Stack for Windows
    TOSHIBA Wireless Key Logon
    RICOH Media Driver
    O2Micro Smart Card Reader Driver
    TOSHIBA HDD Protection
    TOSHIBA SSD Alert
    TOSHIBA SD Memory Utilities
    TOSHIBA SD Memory Boot Utility
    TOSHIBA Hotkey Utility for Display Devices V3.4.5.5 for Intel VGA
    V3.4.7.0 for nVidia VGA
    TOSHIBA Display Device Change Utility
    TOSHIBA 180 Degrees Rotation Utility
    TOSHIBA Zooming Utility
    TOSHIBA Power Saver
    TOSHIBA Mobile Extension
    TOSHIBA Utilities
    TOSHIBA Password Utility
    Wireless Hotkey
    TOSHIBA ConfigFree
    TOSHIBA Management Console
    PC Diagnostic Tool
    TOSHIBA Assist
    TOSHIBA Controls
    TOSHIBA USB Sleep and Charge Utility
    TOSHIBA PC Health Monitor
    TOSHIBA Cooling Performance Diagnostic Tool
    CD/DVD Drive Acoustic Silencer
    Infineon Trusted Platform Module Utility
    Authentec Fingerprint Utility
    Chicony Camera Assistant Software
    TOSHIBA Security Assist
    Please let us know if you have installed WXP and all Toshiba stuff properly.
    Hopefully everything will be OK. ;)
    Good luck!

  • Tecra A10 - Installation order for XP, additional Windows updates and JRE

    Hello,
    Sorry to post a new thread but the old one " [Tecra A10 - Installation order for XP|http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=45611] " being closed and my question relates to the same topic.
    I got hold of a Tecra A10 PTSB0A-002001 and I would like to install XP SP3 on it so the order in which to install Toshiba additionnal drivers is very useful. Thank you Ivan25 for that information.
    Toshiba also include a Java Runtime Environment 2 package which I was planning to replace by a JSE 7. I would like to know in which order it has to be installed?
    Furthermore, after installing XP SP3 there are still hundreds of Windows updates to apply, should those Windows updates be installed straight after XP SP3 setup or after Toshiba drivers?
    Thank you in advance for your help
    Cheers
    Eric
    Message was edited by: ebouge

    Hi Francesco_1,
    Thank you for you reply. I did install JRE 7 in fact because JRE 2 is a bit out-dated.
    For information, the "ALPS Pointing-device Driver" returned errors but all went fine when Iinstalled Vista 32bit driver instead of XP 32bits
    Another question, is with regards to "Intel(R) Matrix Storage Manager(iMSM) ". Since, we have to install SATA HDD drivers during Windows XP setup, is it necessary to run again the "Intel(R) Matrix Storage Manager(iMSM)" which might overwrite the SATA driver installed at the beginning of the setup?
    I agree with you that WXP might not be the best choice, but I need to run some older software that do not work yet under W7, especially under W7 64bits! I am planning on having a boot lodaer anyway, which will allow me to start MS-DOS, XP, W7 or Linux depending on the need.
    Cheers
    Eric
    Message was edited by: ebouge

  • Creation of IBase with reference to sales order for Configurable product.

    Hi Experts,
            Can any one tell me How to create Ibase with reference to sales order for Configurable Products. I know we can create this using IB63, but what i need to do in this Transaction code and what settings i need to do in SPRO.
    pls send ur replies to [email protected]
    Thank you..

    Hi
      You can create IBase using T-Code-IB53 and in there you can give Parent and child products.
    A)Define Installed Base Category and Installation Rules-CRM
    B)Define Object Families
    C)Define default settings for equipment replication
    D)Define Serial Number Profiles-ECC
    E)Txn BF31-ECC
    F)Set up attributes for individual objects
    G)Set up set types
    H)Set up category
    I)Set up views
    J)Allow reference product for IO
    I hope it helps
    If you require further help let me know.
    Cheers
    Raj

  • I have tiger 10.4.11.  In order for my computer to recognize my new Iphone I need to install the new iTunes, however the new iTunes will not download on my computer because it is not 10.5 or higher.  Is there a way that I can upgrade to leopard?  Help!!

    I have tiger 10.4.11.  In order for my computer to recognize my new Iphone I need to install the new iTunes, however the new iTunes will not download on my computer because it is not 10.5 or higher.  Is there a way that I can upgrade from tiger to leopard?  Help!!

    Mac OS X 10.5 Leopard installation system requirements
    http://support.apple.com/kb/TA24950
    Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
    If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
    MB427Z/A  Leopard 10.5.1 install DVD
    MB576Z/A  Leopard 10.5.4 install DVD
    MB021Z/A  Leopard 10.5.6 install DVD (single user)
    MB022Z/A  Leopard 10.5.6 install DVD (5-user family pack)
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
     Cheers, Tom

  • Block purchase order for releasing

    Hi expert,
    is it possible for us to block a PO for release if the item in PO already been blocked ?
    Thank you.
    Regards
    Simonksh

    user11197404 wrote:
    We sent the purchase order for the new license to Oracle on last Friday
    yet to receive the new CSI for the new server .
    can we still move forward with deployment activity and later specify the CSI
    or would that stop us suring the install process if we don't have yet the CSI ?
    Are you asking from a technical or legal standpoint?
    If technical, do you see anything in the installation instructions that mention entering license information? What happens if you try to go ahead and install? What could be the worst that could happen?
    >
    Kindly help me .
    If you have any idea any metaline node pls let me know ..
    Thanks an addvance..
    j2vinod

  • Purchase order for the new license

    We sent the purchase order for the new license to Oracle on last Friday
    yet to receive the new CSI for the new server .
    can we still move forward with deployment activity and later specify the CSI
    or would that stop us suring the install process if we don't have yet the CSI ?
    Kindly help me .
    If you have any idea any metaline node pls let me know ..
    Thanks an addvance..
    j2vinod

    user11197404 wrote:
    We sent the purchase order for the new license to Oracle on last Friday
    yet to receive the new CSI for the new server .
    can we still move forward with deployment activity and later specify the CSI
    or would that stop us suring the install process if we don't have yet the CSI ?
    Are you asking from a technical or legal standpoint?
    If technical, do you see anything in the installation instructions that mention entering license information? What happens if you try to go ahead and install? What could be the worst that could happen?
    >
    Kindly help me .
    If you have any idea any metaline node pls let me know ..
    Thanks an addvance..
    j2vinod

  • Smsy "Read System Number" customer number unknown for installation

    Hi gurus,
    I 'm configuring SMSY and following the steps outlined in the IMG in the basic settings and trying to configure RFC connections to/from satellite systems. In SMSY, I have 2 systems configured SMA and BIF.
    tcode SMSY-> Systems -> SAP ERP -> SMA , Tab "System Data in SAP Support Portal".
    Click "Read System Number" returns error SAP customer number unknown for installation number 0020179718. <-Why?
    Click "Installation Data" shows data from SMP with correct installation number and correct customer number 706822.
          The S-user listed under "Contact Persons" is not mine, not the correct one. <- Why? How to fix?
          The system number from SMP matches value in System Number field.
    Click "System Data" shows data from SMP also shows correct data.
    Why unable to "Read System Number" when the correct system number is read via "Installation Data" and "System Data"?
    tcode SMSY->Systems->SAP ECC->BIF, Tab "System Data in SAP Support Portal".
    Click "Read System Number" returns error "SAP customer number unknown for installation number 0020472810". <- Why?
    Click "Installation Data" shows data from SMP with correct installation number and correct customer number 706822.
          The S-user listed under "Contact Persons" is correct one.
          The system number from SMP matches value in System Number field.
    Click "System Data" shows data from SMP also shows correct data.
    Why unable to read system number?
    When I login to SMP with same S-user, under System Data Maintenance, the same data is displayed as in "Installation Data" and "System Data" links.

    I don't know what happened. I came into work today and tested the "Read System Number" and it worked. I read thru the 2 notes you mentioned, just read now. The first notes I had already followed before opening this thread. The 2nd notes also talked about turning off BAdI implementation AI_SDK_SP_RFC_RP, of which I did a couple of days ago before opening this thread. I had turned turned off BAdI and simplified the AISUSER table and removed the customer number field, in order to get back to the "single-user number" basic setup in the IMG.
    I had found the problem with the wrong contact info on the SMA system. It was wrong in the SMP system maintenance under installation data.
    Thanks for your help.
    -Don.

  • Business content 3.30: Datasources not available for installation

    Hello,
    we have recently upgraded our business content from 3.10 to 3.30 in order to get new business content (e.g. datasource 2LIS_13_VDKON - billing item pricing conditions).
    Although the upgrade was successful, the new datasources cannot be found in the Administration Workbench/ Business Content in order to install them.
    Is there something more we should be doing after the upgrade, in order to be able to see the new Business content as available for installation?
    Thanks in advance,
    Pavlos

    Palvos,
    You can not find the datasources in Admin workbench. Datasources can be found in R/3.
    Login to your R/3 system. Go to RSA5. Expand all. Search for your datasource. Click on "Transfer Datasources" icon on tha tab. This installs your datasources on R/3 system.
    Once the installation is complete, login to BW, go to RSA1, "Source Systems" tab, select your source system and 'replicate datasource' by right clicking on it.
    You can install corresponding Infosource from "business content" tab in BW.
    Hope it solves your problem
    Gova

  • Order of installation and reboots using smpatch/updatemanager

    Using updatemanager it tells me it has installed a certain set of patches and that others require a reboot and will be installed then - fine. I can then download and install further patches as long as any dependencies are met.
    But if I download the patches using smpatch I get an information file telling me the order in which patches should be installed and where reboots are needed. Here's an example:
    patchpro_dnld_2006.07.24@17:47:18:EST.txt
    This patch bundle was generated by PatchPro.
    Please refer to the README file within each patch for installation
    instructions. To properly patch your system, the following patches
    should be installed in the listed order:
    1) 120887-06
    2) 118557-05 !!! IMMEDIATE REBOOT !!!
    3) 122027-04 !!! IMMEDIATE REBOOT !!!
    4) 122856-02
    Now my reading of the above is that I should install 1) then 2) do a reboot, install 3) and do a reboot then install 4) - as that is the listed order. And if I don't do this then I have installed the patches properly
    But running smpatch update it installs 1) and 4) straight away and reports that 2) and 3) will be installed at next reboot:
    Installing patches from /var/sadm/spool...
    120887-06 has been applied.
    NOTICE: Patch 118557-05 cannot be installed until the next system shutdown.
    NOTICE: Patch 122027-04 cannot be installed until the next system shutdown.
    122856-02 has been applied.
    And at next reboot there is only a single reboot and both patches are applied.
    So what's with the instructions in the patchpro* file? Are these just overly conservative guidelines or what?
    Thanks.

    If patch 4 is not dependant on either patch 2 or 3 then there's no problem installing it before either 2 or 3.
    However sometimes I have seen an error:
    ALERT: Failed to install the patch {0} xxxxxx-xx
    which I believe means that the patch has a dependency on another patch which can't be installed because it needs an immediate reboot.
    After doing the reboot you might find that you can go back and run in these extra patches which caused the error the first time around.
    Just my interpretation for what it's worth.
    john.

  • Order of Installation of Fusion Middleware with OID & SSO

    Hi,
    What would be the order of installation for an Oracle Forms, Reports, Portal Fusion Application.
    I followed the order:
    1. Installed Oracle 11g database on Windows system.
    2. Installed the RCU utility and created the repositories.
    3. Installed Oracle weblogic server
    4. Installed Fusion Middleware - Portal, Forms, Reports and Discoverer
    5. Patched the fusion middleware - 11.1.1.3
    6. While trying to configure it prompts me for OID cn=orcladmin; I guess i missed it.
    which order should I install (Identity Management) it and how to get SSO also enabled now?
    Regards,
    Balaji

    If patch 4 is not dependant on either patch 2 or 3 then there's no problem installing it before either 2 or 3.
    However sometimes I have seen an error:
    ALERT: Failed to install the patch {0} xxxxxx-xx
    which I believe means that the patch has a dependency on another patch which can't be installed because it needs an immediate reboot.
    After doing the reboot you might find that you can go back and run in these extra patches which caused the error the first time around.
    Just my interpretation for what it's worth.
    john.

Maybe you are looking for