Order of constructs in a package

Hello,
What's the order of the constructs that i declare in a package? for example cursors must be declares before or after the subprograms? also what about variables, constants, exceptions,... in which order should i declare them?
Thanks

Create your variables, constants, types and cursors first, followed by any procedures/functions and then you can have your optional execution block (option BEGIN ... statements) before the END;
This is the same in packages as if you were doing it in a procedure or function (should you create these with locally defined procedures/functions inside them).

Similar Messages

No Record of my order for the FiOS German Package!?

I order the FiOS German Package yesterday, got a confirmation number from the agent, and an ETA of 5 p.m. for the order to complete. As of this morning, the channels still don't show up, so I contact support. The agent tells me the confirmation number is not in the system.... "I show an order due by the 9th". How confident can I be that the order has actually been processed? Apparently all I can do is wait...
Not that it helps, but at least I have a record of all this by using the live chat option.
Any help from a Verizon Rep on this Forum would be appreciated. Please see the chat session transcript below.
Kind regards,
CarstK
Your chat ID number is 02080956841.
Welcome to Verizon Live Chat. You have selected to chat about:
TN: 4253571012
Subject: FiOS Television (Other)
Question: I ordered the FiOS German Package (channels 1787 & 1788) yesterday - order confirmation number 0N8370143, but when i go to the channels, it says they are still unavailable.
07:45:37 A Verizon Service Representative will be with you shortly. Thank you.
07:45:47 Agent Jim has joined.
07:45:47 Jim : Chat ID for this session is 02080956841.
Jim: Thank you for contacting Verizon Click to Chat Technical Support.
My name is Jim. Please verify the account holders Name and address.
(Me): (My name & address)
Jim: thank you. I am seeing an order made yesterday that is due tomorrow.
(Me): when i place the order yesterday, i was told the channels would be available by 5 p.m.
Jim: 0N8370164
Jim: I am not finding the order you posted.
(Me): 0N8370143 was the number I was given by the agent
(Me): I placed it through online chat. Chat ID 02070948459
Jim: I do not have access to online ordering. This is for tech support. The only order I see is 0N8370164 which shows the fios German package and it is due on the 9th.
(Me): OK, so it looks like the agent didn't place that order for me. Not sure where that other order is coming from then...
(Me): When can i expect the channels to show up tomorrow?
Jim: I do not see one.
Jim: If you call back later today a network technician may be able to push the order.
Your session is now closed.
Thank you. Have a nice day.

I would suspect that next business day being Monday the 9th. I know it may have not gotten processed until late. That is one thing I miss that Directv used to do, instant changes. But even now I think they are only 9-5.
"Jim: I do not have access to online ordering. This is for tech support. The only order I see is 0N8370164 which shows the fios German package and it is due on the 9th."

PM Order description based on the Package Due

Hello Experts,
Can anyone explain me if PM Order description can be defaulted based on the Package Due such as Weekly, Monthly, Quarterly, Annual, etc..
I know we can have multiple maintenance items with different task list for each package, so that the order description is copied from the maint.-item description.
Is there any other better way to do this in standard SAP?
Thanks in advance!!!!

Hi,
As you told, Order description is getting copied from Maintenance Item.
In Maintenance item, task list will be assigned. As single Task list may be having different packages & Order will consolidate the operations with packages based on Hierarchy, its not possible to bring the package due as description.
One work around would be, maintenance item can be defined based on package. Pre-requisite would be task list based on package.
In the task list, operations should be splitted up based on package. One Task list for one package.
Then create the maintenance item based on package & assign particular task list to that maintenance item.
Regards,
Maheswaran.

Ordered online but recieved no package yet

I upgrades my services online on june 30,2015 and had to do the E911 twice. I got no confirmation email about the services that was upgrade to me. I want to know where my package is. I did the E911 verification and the person told me proritory mail 24-48 hours but still 3 days later and no package.
It has been two and a half wks. This is not right. No tracking number for my package or confirmation email. Why does it take 16 days to get my services upgraded.

tigerlily6,
I apologize for any inconvenience this may have caused you. I have sent you a private message to further assist you.
You can click on my name (Comcastcares) and click on "Private Message Me”.
At the top of each Forum page you will see a small envelope
This is the icon for Private Messages, referred to as ‘PM’s’. A Private Message is a way to communicate in private, to another User, Moderator, or Administrator out of public view in the Forums.
The gray envelope icon will have a number next to it if you have any new messages waiting.
To open a PM to read it, double click on the envelope. If you click on the white envelope a window will open with tabs for your Private Message Inbox, Sent Messages, Friends, Ignored Users, and Compose new Message. You can also access this area by clicking on the Username in a Thread or post. By default, Private Messages are enabled. You can disable this feature in My Settings>Preferences> Private Messenger.
http://forums.xfinity.com/t5/Billing/Price-increas/m-p/2542019

Two renewal orders and charges showing every month for one account and same renewal package, WHY

Why am I charged twice with two different orders every month for one package of 800 mins. Are they giving me 1600 minutes! I need only 800 minutes please, so please refund these extra order charges please. I just noticed this thing month today and on checking order history find that same practice has been followed for all my previous months transcations!

Hello and welcome to the Skype Community.
The duplicate charge has been reversed and the funds will be returned to you.

Procedure run order in a Package

Are procedures run in a specific order in a package? If so, what determines that order? Thanks!

A package is an object which contains functions , procedures and cursor declarations.The execution order depends upon which object is called on what order. By order of execution did you mean Triggers definde on a table?
Thanks

Display construction type on the structure list within the work order

I have a work order written against an equipment which has a construction type assigned to it. When using the structure list from the components tab of the work order, the construction type does not display under the equipment in the list. If I run the same structure list from transaction IH03, the construction type does display under the equipment. How can I add the construction type to display on the structure list within the work order? We are on release 4.7
Thanks,
Terry Gaskin

Thanks PeteA, we know we can do that, but we are looking to get it consistent with IH03, where the construction type shows without being added to the BOM. The construction type is listed immediately below the equipment in IH03.
Thanks

Creative Cloud Packager 1.4 "Ooops something has gone wrong, please try again"

I'm on OSX 10.8.5 and only get that message when I open creative cloud packager 1.4.
I've downloaded a new version and reinstalled. Rebooted.
Firewall is open, nothing in my hosts file.
It worked the other week and AFAIK nothing's changed.
I need to use this in order to create an update package to push to the Enterprise.

Hi jegenes,
Please navigate to ~/Libraray (User Library)/Application Support/Adobe/OOBE/opm.db and delete it. Launch CCP and try to sign in. Please let us know whether it worked.
Regards,
Romit Sinha

How to copy procedures and packages from one server to another?

Hi,
I have 439 packages and 178 procedures located in one server called MAXWELL.
I need to copy these objects to another server called TITAN.
The schema names is SPCBR in both servers.
So both servers have an instance running with this schema SPCBR.
SPCBR in TITAN server has their tables with table data which was generated by an export/import process from MAXWELL server.
However, procedures and packages were not copied by the export/import because I used the clause 'tables'.
Now, what can I do in order to equalize procedures and packages in both databases? I can't risk in damaging or duplicating data in my database located in TITAN server, ok?
Thanks,

Another simple alternative, according to AskTom (http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:454220160386)
---------------- getcode.sql ----------------------------
set feedback off
set heading off
set termout off
set linesize 1000
set trimspool on
set verify off
spool &1..sql
prompt set define off
select decode( type||'-'||to_char(line,'fm99999'),
'PACKAGE BODY-1', '/'||chr(10),
null) ||
decode(line,1,'create or replace ', '' ) ||
text text
from user_source
where name = upper('&&1')
order by type, line;
prompt /
prompt set define on
spool off
set feedback on
set heading on
set termout on
set linesize 100
------------------- eof --------------------------------
it extracts one procedure, function or package to a file. Thats it. If you
wanted to get all of the procedures in a schema extracted to the current working
directory, you would run a script:
--------------- getallcode ---------------------------
set termout off
set heading off
set feedback off
set linesize 50
spool xtmpx.sql
select '@getcode ' || object_name
from user_objects
where object_type in ( 'PROCEDURE', 'FUNCTION', 'PACKAGE' )
spool off
spool getallcode_INSTALL.sql
select '@' || object_name
from user_objects
where object_type in ( 'PROCEDURE', 'FUNCTION', 'PACKAGE' )
spool off
set heading on
set feedback on
set linesize 130
set termout on
@xtmpx.sql
---------------- eof ---------------------------------
You can see how to filter on that one by adding to the where clause if you want.
Just run @getallcode_INSTALL to run all of the scripts...

Infinity Order Delay - Worried

Hi folks,
Hoping someone can advise me on what to do here, because I am starting to stress out a little bit over my current situation.
Firstly, my back story. I'm currently a BT Broadband customer, but I am moving to a new home where BT Infinity is available, so I ordered the BT Infinity 2 package. I was originally hoping to move on the 10th Dec, but BT told me that the earliest they can move my connection over to my new place is on the 19th due to requiring an engineer visit. Now for an average person, that just means 9 days without internet, no big deal right? Not for me though because in my case, I work full time online. If I'm not able to work, I lose money.
So I delayed my move to the 19th thanks to my current landlord who is letting me stay a bit longer, although it does mean I'm having to double up on paying rent for two different properties since I have already signed the lease for my new apartment.. but it's ultimately cheaper than me taking those 9 days off.
Anyway, the issue and the reason I'm here today is because I just received an email with the following message:
A survey is required by our engineers before we can progress your order, this will result in a delay in us providing you with BT Infinity Broadband service.
We apologise for the delay and can assure you we are working as quickly as possible towards a solution, we will be in touch as soon as we have a further update.
You can track the progress of your order by visiting www.bt.com/myorder, using your order number [removed for privacy reasons]
Due to my online profession, this email is very worrying for me. I do not know how long this delay will be, or when my order will actually be completed. I've heard horror stories of delayed orders taking weeks to complete, and with it being so close to Christmas, I'm worried I'm about to suffer the same fate. The order progress on the website however still shows the 19th as being the date in which my service will be activated, along with the engineer visit.
I was hoping today to finalise my removal services so that I could be at my new place on the 19th, but now I don't know what to do because I don't know now whether I'll need to extend my stay here further just so that I have a working connection or not. I only have another day or two before that choice is no longer an option. I really hope there's a way to escape this fate, even if it means changing my package so that an engineer visit isn't required. Anything just to have the connection set up by the 19th or at least within a couple of days of that date, as I cannot afford to take time off work, nor can I afford to keep paying rent for two different properties just for the sake of maintaining an internet connection.
If anyone has any advice on what to do in this unusual situation, please let me know. The move itself is already stressful enough, but this is definitely pushing my stress levels through the roof.
Best regards,
X.

I am just a regular user with a residential line/package. I just tried using the phone number they've given me for my new place on the BT business website, but it says that BT business is not available in my area yet oddly enough. Furthermore I do use my connection often outside of work for gaming.. etc, so not sure if I would suit a business line regardless. (To be honest, I don't really know the differences between the two.. but it seems like it's not an option regardless)
My main concern right now is getting a connection up and running by the 19th (or at least before Christmas) at my new place, even if it means having to change my Infinity 2 order to a lesser one, if I can even do that. (I wouldn't be overly happy with doing that, but a working connection is more important than having to potentially wait weeks after the 19th for one)
Would an Infinity 1 package require an engineer visit? Or would this whole "delay due to an engineer survey" thing affect that too? Also is it normal that my order summary page still shows the 19th as my activation date, despite the email stating a delay? The agent on the phone did mention that an engineer would be in the area prior to that date, which is why I had to wait 'til the 19th in the first place despite originally being quoted an earlier date previously. (I ordered originally on the 24th Nov.) I'm really confused and unsure of what to do right now.. because my whole move is resting on this pretty much. I should note that my new place apparently has the rare FTTP packages available, allowing me to choose Infinity 3 or 4. I'm assuming that changing my order to one of those will not change anything though?
Thanks for your advice so far, much appreciated.
Regards,
X.

Customer Service re Order Tracking

My BT Vision+ box lost its internet connection because of a faulty Powerline Adapter on Monday 9th; problem dealt with efficiently on callcentre chatline and a pair of adapters were to be supplied. I got an email next day to say they were on the way and due for delivery by Royal Mail on Wednesday 11th. Tracking number and VOL references were supplied. The adapters didn't arrive on 11th; the numbers didn't seem to mean anything on Royal Mail's tracking website so I phoned BT on 0800 800 150 and Sharon at BT checked out the order and said the parts would be delivered 'today'(ie Thursday 12th) - but nothing turned up. Today (Friday 13th) I've been trying on and off to make contact with some human being at BT - totally unsuccessfully other than time spent talking to the Indian (?) callcentre who didn't know who would deal with the issue; they eventually transferred the call which I hung up after listening to music for 30 minutes.
How long am I supposed to hang around waiting for a delivery that may never arrive; I can't use the BT service I'm paying for. I don't know what to try next!

Just an update; finally got to speak to someone at BT Order Tracking late on Friday 13th; they said there been some undisclosed delay on my order; they said a new package would be sent out with delivery scheduled for Tuesday 17th. I told them I was dissatisfied with BT's service as I had been denied full functionality of my BTVision+ service for 5 days so far. They agreed to log my complaint with a view to compensation.
AMAZINGLY! - the package containing the Powerline adapters arrived at 9.15 on Saturday morning (14th); but this was the original consignment which was supposed to have been delivered by Royal Mail on Wednesday (11th).
All's well as ends well!
But I do wonder about the difficulty in finding the right buttons to press to get action or - at least - a truthful response from BT.

Order to script creation of objects? Some reference each other.

I'm writing a script that will add objects to a 10g schema. I have packages containing functions and procedures. The functions and procedures reference some views that also need to be added. The views themselves reference some of the package's functions. Which has to be added first? I think the package first then the views? Or maybe it does not matter?
At the end of the script can a command be added to compile the various objects that have been added?

I'm a little late to the party here but.
To do this type of interdependent compile, the logical ordering would be:
1. Package specifications (i.e. CREATE PACKAGE)
2. Create views, since the views are really dependent on the public specification for the packaged functions, not the actual implementation.
3. Package bodies, since the implementation is dependent on the existence of the views.
At the end of the process, you will, assuming that everything is syntactically correct, have all valid objects.
john

Can't see package body in SQL Developer version 3.1

Hello,
Have been scouring the boards and google for this issue for quite some time now. I think I have discovered the issue, but would like to see if a work around exists.
Problem:
I am unable to view packages, procs, VIEW DDl, etc. of other users. When a colleague of mine uses Toad, with the EXACT same connection ID and setting, they are in fact able to see all the source code...
What I've found:
Looking around, apparently Toad and SQL Dev work in different ways. Toad apparently uses DBA_SOURCE and DBA_OBJECTS to generate everything.
SQL Dev uses the META_DATA package to retrieve everything. Further, in order to use the meta_data package, I need the grant catalog role, or something like that.
Is there a way to set up SQL Developer to use the same method as Toad to retrieve the code? It's a fact that I WILL NOT receive the catalog permission per the DBAs... I can write out the
select text from DBA_SOURCE where OWNER = 'OWNER' and NAME = 'OBJECT NAME';
But, I would prefer to just be able to use the tree nodes and click on objects to generate all this. Anyone know of any setting for this?

Hi,
No doubt SQL Developer wants to be competitive with Toad but, in terms of raising red flags over inconsistencies in basic functionality, any difference versus SQL*Plus would be more surprising than versus Toad.
DBA_SOURCE and DBA_OBJECTS are public synonyms available in any standard Oracle installation, but you also need the SELECT ANY DICTIONARY privilege to get maximum benefit from them. That lets you view code in another user's schema without having an explicit privilege (like EXECUTE) on a package/procedure/function.
If you already do have such privileges (either SELECT ANY DICTIONARY, or EXECUTE or DEBUG on specific executable objects), and the Code tab is empty, then you will need to provide a test case, as Vadim indicates.
In terms of any case where SQL Developer utilizes DBMS_METADATA, my understanding is the API relies on the SELECT_CATALOG_ROLE privilege if a user does not own or otherwise have an explicitly granted privilege on an object. Developers like to use this API wherever possible in place of writing a script that might break or need maintenance to deal with future versions of the Oracle database.
I have no idea how Toad works, and I probably shouldn't speculate, but here is one scenario that could explain the case you mention without the connection user having any of the privileges noted above. Let's say the Toad client software calls a PL/SQL package that selects from DBA_SOURCE and is installed in a schema that has the SELECT ANY DICTIONARY privilege. All Toad users are granted EXECUTE on this package and therefore inherit SELECT ANY DICTIONARY in the context of running the package. This will work, but at the price of complicating installation of Toad. Also, it doesn't afford an administrator fine-grained control over metadata security.
Regards,
Gary
SQL Developer Team

Missing Package Information and My Extras informat...

I upgraded to BT Infinity on 1 May and for all intents and purposes my order was fully cpmpleted on the day. However the order is showing in MYBT as still being in progress, As a result I can only access my billing information. The error messages shown in MYBT are as follows:
( Due to a system error we can't display your product information. We are working to fix this for you as quickly as possible.
If you need access to the broadband usage tool in the mean time, you can access the page through this link:
My Extras
We can’t retrieve your Extras, either because you have a calling plan or a broadband service in this account or because you are not the account holder. Please let us know if you do have a calling plan or broadband service in this account and you are th..., so we can amend your profile.)
I have called at least 6 times to try to get this resolved. After pushing I am being informed there is an extraneous item in the order for upgrading my broadband package preventing it from completing. I am told this will need to be resolved by manual intervention. Come on BT how long do you need. I would like to be able to manage my account again. On the plus side my new Infinity connection is working well.

I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, make sure that you are logged into the forum, then click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Error Message when attepmtping to order broadband ...

I get to the very last screen, hit send and get:
There's been a technical error – but you can still place your order online.
To order a Broadband and Calls package with optional TV, click here
To add BT Vision to your existing BT broadband package, click here
To order a new phone line, click here To switch your calls back to BT Click here
Ref# CON-0067
Been like this for days. Anyone know what CON-0067 means amd how to get around this issue? Have been trying to get BT on the phone to place the order that way, but only have a mobile and it costs a fortune as so far have been on hold several times for over 20 mins, so give up every time as it costs too much.
Not at all impressed with BT so far as placing an order should be easier than this, but unfortunately there is no cable in my area so have to have BT broadband
Thanks for any help.
Adriana

I don't have much faith in online ordering. Call 0330 1234 150 - that will be charged to your mobile calling plan.
By the way, if you have a landline it's worth spending a few quid on a basic corded phone for emergencies.
You can click the white star next to this message if you think it was helpful.

Order of constructs in a package

Similar Messages

Maybe you are looking for