Order unit and confirmation unit

Hi
Is there any way to achieve this..
I am creating a production order in units EA..(For Eg Welding rework order)
While confirming the unit should be in tonnes.
Say 100 ea of a material is equal to 1 tonne of confirmation qty..
In other words, if a worker confirms 100 qty of a material, in the confirmation table the qty should be 1 tnne.
If possible how to accomplish this..

"if a worker confirms 100 qty of a material, in the confirmation table the qty should be 1 tnne."
is ur issue is confirming in TONN or to store in table as TONN unit.
if ur issue is 2nd then its wont be possible at all, as the data is stored in the Base UoM.
and 1st case is easily possible using alternate unit of measure.
Regards,
Pravin Mukkawar
TCS canada

Similar Messages

  • Order qty and confirmed qty mismatch

    Dear friends,
    My requirement is System should not allow to go further if the sale order qty and confirmed qty(after avaialbility check) mismatch is there.Pls suggest.
    Now currently system will check the availability qty and will show the information of confirmed qty in the another screen.and if we say continue the process, we can go ahead and save the document.but the document will be in open state.
    So pls suggest the way i can go ahead for this requirement.
    Regards
    Mahendar.

    hi,
    If u want to allow user to create SO as much as available qty..? means  system sud create SO for order qty is equal to availble qty ...? if yes
    then go the availbality check  and find out availability check and checking rule..
    and again go to OVZ9 remove the check box check with out RLT from rep.lead time tab
    Resul is: If u enter in SO a10 qty ,and if you have only 5 qty in hand or in plant ,then system after checking the items it will change the order qty in SO(i e 5) automatically,
    Caprin

  • How to inherit roles between root organization unit and sub units

    Hi all,
    I have root organization unit and sub units:
    ->Company
    >Department 1
    >Department 2
    >Department 3
    >Department 4
    >Department 5
    I would like it to work like this that all people from all departments would have access to transaction ZTEST. Most obvious way would be for me to assign appropriate role to unit Company. Unfortunately it looks like roles are not inherit between units like this. So question is how it should be done? Do I have to assign this role to all departments to make it work?
    Best regards
    Marcin Cholewczuk

    Hi,
    To activate inheritance of roles between root org and sub org units, you need to set switch HR_ORG_ACTIVE to Yes in table PRGN_CUST. Also proper evaluation path has to be used so that user comparison (via PFUD)  creates the indirect role assignment to user master records.
    You can modify evaluation path US_ACTGR in table T77AW/ tcode OOAW to include root org and its subunits (add entry for relationship O B002 O) and connect the role assigned to root org to the users belonging to sub org units. Then run PFUD which will use this evaluation path to create indirect role assigment.
    Thanks
    Sandipan

  • Nested Handling Units and Confirmation of Transfer Order - Pick HU

    Friends & Gurus,
    I have nested (low level) handling units and when confirming  I would like one of the nested HU to become the pick-HU. So far I haven't been able. The pick-HU is always generated with a new number and if I try to assign manually one of the nested HU the systems says that the HU is not assigned to the TO.
    Any comments or ideas will be appreciated.

    I fully agree and thanks for coming back.
    I can unpack the nested HU and then create a TO and select the unpacked HU (now a SU) as a full HU removal. I believe this is not operative, the idea is the operator gets to the big box, chooses (scans) one of the small box (nested) and confirms the TO. If somebody back at the office has first to unpack one of the nested HU (how could he know which one if there are 30 of them? Which one is on the top?) it makes it unviable.
    Are we on sync?

  • Sales Unit and Purchase Unit

    Item Master Setting
    Purchase Unit: Pack
    Quantity per Purchase Unit: 12
    Sales Unit: Pcs
    Quantity per Purchase Unit: 1
    If we sales 13 pcs to customer and generate the purchase order from sales order, the quantity of the
    purchase order will round off as 1 pack.
    Sales Order qty = 13 pcs
    Purchase Order qty = 1pack
    Sales Order qty = 13pcs
    Purchase Order qty = 2pack
    Due to the actual result if 1 pack which can not fulfill the requirements from customer.

    Dear
    Goto CUNI-Unit Of Measurement -Decimal Places - change the decimal place to 0
    Or Decimal Pl.Rouding -keep it blank.
    Hope this will solve the issue
    Regards
    JH

  • Automatic production order creation and confirmation

    Dear all,
    I am in a situation where i have to configure the SAP system in the following ways:
    1. From the planned orders automatically production order should be created today for the next day production and the end user will re-declare the quantity if there are any changes in the production order.
    2. If there are no re declarations to be done SAP should automatically release production order and save it.
    3. After the goods are produced the confirmation of the order should happen automatically from the measuring points.
    4. In the order confirmation, the storage location for goods issue should be automatically captured from the goods issue slip.
    5.After the confirmation of the order the goods receipt should happen automatically.
    Please suggest me whether these are possible in SAP or not.  If yes please tell me the procedure.

    HI,
    I hope this will give you the clear picture
    actually my scenario is:
    Finished good= x
    work centers involved = WC1, WC2.
    HERE BOTH THE WORK CENTERS ARE IDENTICAL, INPUTS ARE SAME AND OUTPUT IS THE FINISHED GOOD "X"  FOR BOTH THE WORK CENTERS.
    I HAVE A ROUTING FOR THE FINISHED GOOD "X" WITH TWO GROUP COUNTERS AS (1)WC1 AND (2) WC2
    When i create plan in md61 for 1 month and when i do mrp run in md02 it will create the planned orders and we can see the stock requirements in md04 and when we double click on the planned order we can convert them into production orders.
    But my users requirement is, he want to run the mrp in md01 and after that automatically each day the production order should be created.
    example with the above work centers and materials:-
    i have done the mrp run for "x" for November and December months
    i want to produce "x" of 200 kg on 30.11.2011.
    so SAP should generate production order for WC1 AS 100KG AND WC2 AS 100KG on 29.11.2011 at 5 pm automatically  and the user will release the order.
    similar example:-
    i have done the mrp run for "x" for November and December months
    i want to produce "x" of 400 kg on 03.12.2011.
    so SAP should generate production order FOR WC1 AS 200KG AND WC2 AS 200KG on 02.12.2011 at 5 pm automatically and the user will release the order.
    Please suggest me how to do the configure settings for my users requirement.
    Thanks,
    Aravind.C

  • Run time error while running BDC for production order creation and confirmation:

    Dear Gurus,
    We have a situation, where the users are trying to do the entries creation of order or confirmation (through manual and BDC). But, if there is any kind of a deficit quantities in consumption or GR quantity, then it is going to run time error and Dumps are coming in program SAPLCORB
    and the transaction code is coming for CO11N.
    How to avoid this error to run the production system in smoothing way...Any flash lights on this will be great full
    Regards,
    Madhu.G

    Hi Madhu,
    Expert Caetano has rightly point out. Refer Note 1840705 - RAISE_EXCEPTION short dump if running CO11N in background
    Cause
    The short dump is triggered because SAP transaction CO11N contains new GUI elements that cannot always be dealt with in a background process,
    such as the confirmation texts.
    Resolution
    SAP recommends that the standard production order BAPIs, such as BAPI_PRODORDCONF_CREATE_TT, should be used to post a confirmation in background.
    If this is not feasible, the following workaround may be uses:
    Define a confirmation profile in transaction OPK0; 
    In the detail areas, remove the area "Confirmation text"; 
    Set this profile as standard, so that it is chosen automatically by the system when a batch-job
    is started; 
    Assign this confirmation profile to the batch user with transaction SU3 using parameter CORUPROF.
    Also see Note 429432 - CO11N: Batch input in background dumps if long text is maintained
    Refer to note 1154692 - Endless loop during confirmation in background if you doing Auto GR during confirmations
    Thanks & Regards,
    Ramagiri

  • PO unit and GR unit is different

    All SAP Gurus,
    We have maintained BAse unit of measure as Kg.
    PO unit as Lb (Pound).
    Now we want to do GR (MIGO) in Kg, is it possible that at the time of GR (MIGO) syastem will automatically take unit as Kg?
    Regards,

    hi Rajan,
    Pls check the base unit of measure in the plant data/sto. 1...it shd be KG and for the goods issue you can use the unit of issue as per your req...
    pls check...m not sure....
    But this shd work...
    Regards
    Priyanka.P

  • UoM Conversion from SAP units to ISO units -- Prod Order IDOC (LOIPRO01)

    Hello,
    We are trying to build interface for Production Order details to pass to a Mfg. system. using IDOC LOIPRO01.
    Looks like the IDOC processing is converting SAP on-screen UoM to ISO UoM for ex.  PC (in SAP Screen) to S2 (IDOC Field Value).
    I would like to know if there is any OSS notes or anyother way to prevent this conversion and just pass the same value what we see in SAP screen to the Mfg. system.
    Appreciate your inputs in thsi regard.
    Best Regards,
    Bharat.

    changes in master data have only effect to NEW data, created after this change .
    SAP never updates automatically already existing data.
    Answer: No there is nothing that can trigger an automatic change.
    changes to ratios between base unit and alternative units are unusual and the changer has to know about the effect. it is not only the existing info record, you have to think as well about open POs which still have the old conversions.

  • Base and alternate unit of measure  - Per PO conversion

    Hi,
    Here is my problem :
    I buy let's say 100 M of Configurable Material A, the weight  Stock unit (KG) is expected 50 .
    Now buy another 100 M of Configurable Material A, the weight  Stock unit (KG) is expected 100 . because of a slightly configuration change.
    I which I can change the conversion between Buying Unit and Stock Unit on the PO itself ( UMREN - UMREZ ) depending on the user input or config changes (feg dependency like we do on sales).
    I didn't find the right zone to unlock these two fields  in the "SPRO  ... Define screen layout at doc level" , and I am not sure it is the right way to reach my goal.

    Hi,
    BASE UOM is the unit of measure which will be used by business to calculate the weight of the goods or rather the Unit of measure in which stocks of the material are managed.
    Say for example I create one bulb. The base UOM is PCE or Piece.
    It means that the Bulb will be referred to as 1 Piece irrespective of its weight.
    So if in the sales order i put 10 PCE of Bulb it means 10 individual unit of the bulb.
    Alternative UOM is the Unit of measure in which quantities can be entered alternatively to the base unit of measure / stockkeeping unit.
    Say for example in our cases; we are selling these bulbs in boxes.
    I BOX = 10 PCE .
    So BOX becomes your alternate UOM.
    The relation is maintained in MARM table via the additional view in the Material Master (MM01/ MM02/ MM03 transaction)
    The relation 1 : 10 is managed by the UMREN UMREZ fields in MARM.
    I hope this is useful for you.
    Regards,
    Ankur Parab

  • Bapi of classification and alternative unit

    Hi Experts,
    i am working for a program, which was creating materials.
    I want to know that which bapi can i use to select classification tab and fill the class type(KLART) and class(KLASSENART) during this program.
    Another thing i can't find the badi of alternative unit(again during creating material, this badi should fill the alternative unit and conversation of alternative unit and base unit)
    Thnx,

    Hi,
    Check this...
    BAPI_MATERIAL_MAINTAINDATA_RT
    BAPI_MATERIAL_DELETE Flag Material for Deletion
    BAPI_MATERIAL_DISPLAY Display Material
    BAPI_MATERIAL_EDIT Change Material
    BAPI_RETAILMATERIAL_CREATE Create Material
    BAPI_RETAILMATERIAL_DELETE Discontinue Material
    BAPI_STANDARDMATERIAL_CREATE Create/Extend Material
    It is used for both Create and edit the material data.
    refer to the following link :
    Re: Mass creation of Material Master Records
    Re: How to use BAPI BAPI_MATERIAL_SAVEDATA
    Re: Mass creation of Material Master Records
    http://www.saptechies.com/mm01-upload-using-bapi/
    Hope this will help you...
    Regards,
    Rahul.

  • Unit conversion from Sales unit to Base unit

    HI,
          I am working on 2lis_11_vaitm and 2lis_11_v_ssl sources.
    Both these sources have quantities in Sales unit.
    In BW how do i convert these quantities to Base unit.
    Both sales unit and base units are available in the sources. But value avialable only in Sales unit.
    I am using delivery quantity from 2lis_11_v_ssl and Cumulative order quantity in 2lis_11_vaitm.
    Kindly suggest a way.
    Regards,
    Adarsh
    Edited by: adarsha a on Sep 6, 2008 3:27 PM

    Hi...
    You can use the function module CF_UT_UNIT_CONVERSION to convert from one
    unit to the another.
    Hope this helps you...
    Regards,
    Debjani...

  • Sale order delivery and billing blocked

    Hi sap sd gurus
    I have a problem after creating a sale order , the one line item in sale order showing status of delivery blocked and billing blocked , now i am unable to post delivery and billing when i see in schedule line item order qty and confirmed qty .
    Now i want to find why this is blocked and remedy for removing this block .
    Could anyone suggest me in this issue asap
    thanks in advance
    Kanna

    Dear Kanna,
    Go to XD02 at the toppage you will find Extras
    In that Extra Topage  you will find a field   Blocking Data.
    Check whether Order block and Delivery Block has been ticked.
    If ticked is there remove the tick and try Delivery and Billing.
    If you have any concerns revert back the same to me
    With Regards,
    Amjath

  • Confirming transfer order for nested handling units (picking and shipping)

    Hi
    My shipping location is HU + WM, I understand we cannot "auto confirm" Transfer Orders during creation from an outbound delivery (LT03) in the case of nested HUs because the system wants to know which exact box HUs ( The TO only specifies the pallet HU...storage unit)
    I have an automatic Pick HU created during TO confirmation but the system still prompts for me to enter  box HUs that need to be shipped/repacked on LT12. This makes logical sense but is slowing down our shipping process. Since we do not put HU labels on our boxes, the picker has to go into HUMO, enter the pallet HU, retrieve the box HUs and finally enter some of those on the TO confirmation screen to match the open quantity. In reality we don't really care what HUs he picks as long as he picks from the right pallet.
    Is there any way to automate this? If the system can pick box HUs sequentially, randomly or create further pick HUs. Anything but doesnt ask the picker to put in the box HU numbers
    OR
    Is there a way to auto confirm TOs during creation
    OR
    Is there any way to putaway box level HUs into the warehouse at the end of the production line so that Storage Unit is the box HU number and not the pallet HU number, that way it wouldn't prompt me for box HUs during picking.
    I would really appreciate your help.

    This is the standard SAP for picking nested handling units.  You can do some more reading on this by accessing the SAP note 829266.
    We had a similar problem with nested handling units - what we ended up doing was writing a BDC program that would take the nested handling unit and pack it back onto that HU instead of the pick HU after TO confirmation was done in the delivery. 
    In order to get your TO to automatically confirm, check the configuration for the storage type that its picking from - look to see if "Storage Type requires confirmation for removal/placement" is checked. 
    You can als ocheck the movement type configuration for Propose Confirmation.

  • What is table field name for order status report  of rate per unit and  bal

    hi  i want to make FS for order status report i almost get all table and field but i don't get only two field  rate per unit and balance value  table field didn't get please help me searching in field and table
      i want to develop my status report

    Hi,
    Check tables VBAK and VBAP wherein you will get all header and item details.
    VBUK and VBUP for header and line item statuses.
    KONV would give you rates/pricing details for each condition type determines in the sales order.
    VBAK-KNUMV = KONV-KNUMV is how you relate both of them.
    Hope that helps.
    Regards,
    Amit

Maybe you are looking for