Ordered through bestbuy.co​m and my order was canceled very unfairly

I feel like the order was canceled very unfairly. The price was great and that is why I purchased it. I ordered the product because because it was such a great price. It was canceled for no reason and no reason is being given or anything is being done. I did receive a refund but i wanted the product that was being offered for that price. How is it fair to have something available for purchase and being charged for it only to be told that i can't buy it when it was listed in stock for that price. I feel like I should have received the item for the price that the company has it listed for. I will be filling out a complaint with the Better Business Bereau if this is not resolved properly. I have contacted customer service with no resolve of the issue just an answer of oh well that's tough sorry. My order money is {removed per forum guidelines}. Thank you.
Here is copy of the email that was sent to me:
We're sorry, but the item listed below has been canceled.
Please note that this cancellation might affect your order's free shipping eligibility, bundle pricing, or gift-with-purchase eligibility.
If you have any questions about the reason for this cancellation — or if you'd like help finding a similar item — please contact us at
1-888-BEST BUY (1-888-237-8289). If possible, please have your order number handy.
We value you as a Best Buy customer and hope to see you again soon.
And a copy of an email from customer service:
hank you for contacting Best Buy.
I am sorry to hear that your HP Geeksqauad Refurbished desktop was cancelled. I understand that you want to know the status of the cancellation.
I was able to check order online. I apologize but the reason for cancellation was not specified in our system. I suggest you try to purchase item instore to complete the order.
We appreciate your loyalty as our My Best Buy member.

Hello jddelaney,
Having an order cancelled is an unhappy experience to be sure. I've had it happen to me too and it's always aggravating. I very much regret that we disappointed you with the cancellation of your recent order.
Using the information you provided in your message I was able to review your order. It appears to have been canceled due to an error on our website. According to the Conditions of Use of BestBuy.com: 
Despite our best efforts, rarely an item in our catalog may not be available, the offer may have been misstated, or an item may be mispriced. For any of these reasons, we may cancel your order or we may contact you for instructions on the order.
Please know that I'm very grateful that you brought your concerns to our attention.
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
 Private Message

Similar Messages

  • Since purchasing the Note 3 in October i have had nothing but issues. I went through all the steps and eventually I was sent a different phone, which was working for the most part until the recent upgrade. Now I am back to the old issues, no service, it a

    Since purchasing the Note 3 in October i have had nothing but issues. I went through all the steps and eventually I was sent a different phone, which was working for the most part until the recent upgrade. Now I am back to the old issues, no service, it actually says not moblie network available, when everyone else in my family has coverage and are on my plan with iphones. I am missing text messages and dropping calls left and right. This is unacceptable for the cost of this phone and my service. I have did a hard reset etc. What else can I do??

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • HELP! problem after update OS & email accounts msg 'there was an unexpected error and the operation was cancelled'

    Hello I hope someone can help as i am very upset my BB10 is not functioning.
    I have had this handset 3 months & love it!
    I updated the OS and now on 10.1.0.4181... I had to do a memory swipe as handset working fine until update then it would not make or receive calls hence the swipe also cleaned up emails etc.
    Now when I come to add the email accounts  which it allows but  no emails are received.. I keep getting  this 
    message 'there was an unexpected error and the operation was cancelled.'
    I used to have 2 x virgin media email addresses, 1 x hotmail.co.uk & 1 x [email protected] email address linked to Z10 
    handset and worked perfect..
    What has happened to my phone.. I so need it to operate as before as I use it for work (self employed)
    On the settings the virgin emails will sometimes say not connected.
    I can use the internet & apps ok & text.. but I love the hub and that is not working like it did...
    Can someone please help & advise before I send it to a watery grave...Thanks

    Thanks for the reply
    Can I get you to manually add the live.co.uk email account by changing the incoming mail server to one of these servers: blu-m.hotmail.com, dub-m.hotmail.com, stn-m.hotmail.com, bay-m.hotmail.com, col-m.hotmail.com or snt-m.hotmail.com.
    Then try to add it, let me know if the issue persists.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Handling Planned order created from Demand planning and Sales order in MTO

    Hi all
    In MTO\ Repetitive we genrate Dependent requirement from demand planning (PIR) after running MRP which finally planned order created but on the other hand in short term we have Sales order which generate planned order after running MRP(In MTO), How we should handle planned order generated from Demand planning and the ones generated from sales order.(both after MRP Running).
    Regards
    Babak Bolourchi

    Dear,
    You can combine the planning strategy also main as 56 and second as 65 and in demand managment MD61 you have the option select requirement type.
    Then while creating sales order use MTO strategy and take MRP run through MD50 and then MD02.
    and if you want to assign the stock to sales order then you and do it through MB1b with 412 E movement type.
    As per my knowledge, generally 56 strategy only takes Sales Order Stock into consideration.
    Consider setting the Individual/Collective indicator to 2.
    Mark those characteristics that should have a usage probability in demand management as Relevant for planning.
    Hope clear to you.
    Regards,
    R.Brahmankar

  • Sales order stock on delivery document and transfer order

    Hi all,
    At my current client I have a requirement where we need to put stock against sales order (sales order stock E). So, being a MTO process we create production order and perform goods reciept to unrestricted stock. To avoid getting picked up by a different sales order, we move the stock to sales order stock using 412 E (tcode: MB1B). Here are the issues I am facing currently:
    1. Is there a direct way of receiving production order directly to sales order stock?
    2. I couldn't find a way to do the first, so I am currently receiving production order against unrestricted inventory and then move it using MB1B. So, the stock can be seen to assigned to sales order.
       2a. When I create delivery it is not consuming same stock, it is consuming inventory out of unrestricted stock (if any, in case no inventory is available it throws error of 0 available quantity). Once I have assigned sales order stock why is it still looking into unrestricted? Is it due to the requirement type which is assigned. Do I need to change the item category so availability will check sales order stock (similar to item category TAB)?
      2b. This probably will be resolved if I get the delivery fixed but we have SAP WM and during TO creation I don't see the special stock reference filled in? I tested this process with item category ZTAB (copy of TAB) which creates purchase requisition and it seems to be working but I don't need the purchase req for my case.
    3. This is more of an accounting issue: when I attempt to move stock from unrestricted to sales order stock using 412 E, I was getting "Account XXXXX is not assigned to cost center". So, I went in an assigned a cost center to this cost element. IS THIS REQUIRED & WHAT IS THE RELEVANCE as it takes stock out of inventory.
    I understand it crosses other functional areas but even if you can clarify 1 part of it, will be very helpful.
    Thanks.
    Naren

    Dear Friend
    You are telling that it is MTO scenario and you are posting stocks into unrestricted stocks
    This is entirely wrong
    This is happening because of a simple thing missing in your sales order item category configuration in VOV7 that is special stock indicator E is missing which should be there
    This is the cause of whole problem
    MTO item categories will have special stock indicator E in standards
    In MTO based on the sales order production order is triggered and stocks are receipted against sales order and not into unrestricted use by defaut in standard
    You will receive MTO stocks as sales order stocks in your plant  only in standard
    But it is not happening for you because of  stock indicator E in VOV7 of your sales order item category is missing
    Posting MTO stock in to unrestricted use is meaningless  and the same is happening because of a slight miss out in setting in VOV7
    This is the solution for issue no 1
    For issue no 2
    You have created the sales order( MTO order) without special stock indicator E and now you are doing a transfer posting in MB1B with 412 E  referencing the order no sales order stocks  that is Fine
    You are getting an error that only zero qty is available either at delivery or at pgi eventhough in MMBE you will find sales order stocks in your order name
    This is happening because
    Reservation in MB1B is done with special stock indicator E for sales order
    But the  same sales order is not created with special stock indicator E in VA01 during creation
    There is a mismatch
    Hence the system is not able to sense while the order comes for delivery there are already stocks are reserved
    By inputting  special stock indicator E for sales order item category the whole issues will get solved
    By doing that there is no need to do MB1B itself
    The first step itself will get corrected  as the stocks will be posted to sales order stocks no need for MB1B
    No need to touch TAB make it ZTAB as it is meant for a different purpose it is for individual purchase order not to be used for MTO
    *By marking the special stock indicator as E in your sales order item category your entire issue will be resolved*
    Issue no 3
    MTO is based on costing for which you have take the help of FI person
    Note Very important
    If U make the settings now in item category it will not work for the existing or already created order
    With existing orders it will have the same error as the order is created without special stock indicator E
    Only for new orders it will work and from Now on it will work
    Test it with new order cycle starting from VA01
    Please let me know this issue has got solved or not?
    I am 200 % sure it will get solved
    Regards
    Raja

  • PIQGRAD and PIQGRADST  = Action was Cancelled

    Hi Expert,
    I have an issue when i would like to edit graduation from menu PIQGRAD and PIQGRADST.
    When i would like change or display the graduation, suddenly appear an message error  "Action was Cancelled"
    Could u tell what should i do to solve this issue.
    FYI. my software component IS-PS-CA release 604 level 0003.
    Regards,
    Rhesa Syahrial.

    Hi Rhesa Syahrial,
    Please change the following element in the IMG for the related CQ object you want to confer with the graduation transaction (PIQGRAD/PIQGRADST):
    Set Up Degree Types and Assign Degree Levels in the IMG under Student Lifecycle Management, Master Data in Student Lifecycle Management, Qualifications, Set Up Degree Types and Assign Degree Levels.
    Please set the usage of your related qualification/CQ degree type to option P (=Graduation context).
    Best regards,
    Rob

  • How can i cancel an pre-order movie?..i pre-order the best man hoilday and im tring to cancel it so i can purchase another movie

    i need help please

    It can't be done on your iPad, you will need to log into your account on your computer's iTunes by (if you have the current version of iTunes installed) clicking on your name towards the top right of iTunes and then clicking Account Info on the popup, or you can login via the Store > View Account menu option : About iTunes Store pre-orders - Apple Support

  • Mac shuts down after start up and before it was acting very slow, please help!!!

    Recently my imac has been running unusually slow when I open/close apps or when loading things, it sometimes would freeze or take about 20 secs to load etc.
    So in an attempt to fix it it cleared all unnecessary files from my computer but nothing too technical.
    Then yesterday i was told by my brother to go onto disk utilities and verify/repair the disk. Both times it failed and further repeats failed. After the repair disk failed a message along the lines of "back up data you want then restore the disk" something like that.
    Now today when I started up my computer in the morning it was fine, then a couple of hours ago I restarted it, and now it won't turn on properly. It goes to the apple icon with a spinning loading wheel and a empty bar underneath and after about 20 secs it shuts down. So then I did the thing where you hold down cmd and r to open osx utilities and went to disk utilities again to try and repair/verify the disk and again the same failure and messages came up suggesting to restore my disk.
    Being 16 I only understand so much and understand that I will probably have to put in the installation disk or something and "re do my computer from scratch." But I do have things I want to back up before I do so but due to the load up problem I have no way of backing up photos, music and files and i don't know if the time machine has backed up the data for me (I don't really understand the time machine). I'm currently using my phone to post this, any help would be greatly appreciated because I don't really know what else to do now. My imac is 21.5 inch that I bought around 2years ago late december time. Thank you for your time

    Sounds like a classic HD failure. Take the machine to your local Apple Store or AASP, if it is still covered by AppleCare they will handle it at no charge. If you have been backing up then once the machine comes back restore from backup. I get you are only 16, so I'd explain to  your parents the computer needs to be taken in for service, if they bought it for you they would know if it is covered by AppleCare or not, assuming they originally bought the computer for you.
    Good luck.

  • I sent my iphone in for repair and the status was canceled repair request.

    I sent my iphone 3GS in for repair and when I checked on the status of the repair, it said repair request canceled.  Does this mean it has been fixed and on its way back or they are sending a new one back?  I am confused.

    Ah ,so you are in Europe ( helps to tell upfront as this is a WW forum )
    They will not repair your iPhone they will check it and assuming no user induced damage will send back a replacement refurbished unit  to you ( reason for no accessories )
    There must be a contact number where you arranged the return
    It is possibly going to Eire where Apple seems to ship most EU shipments from

  • Invalid singature was displayed when I tried to down load the newest software and the download was cancelled.

    I tried to update my software when asked to but the error message "invalid signature" displayed andf the download cancelled. I have been unable to find a solution,

    Hi there KrisonCastillo,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    -Griff W.

  • How to add the long text in Production order through FM

    Hi,
    Iam having custom program which has BAPI (BAPI_PRODORD_CREATE) inside it and this program is used to create Production orders with the details of Sales order Number,Line item,Plant,Order type,Quantity and Start date. This program is scheduled in Background.
    Now client wants to add the Long text (seperate TAB in production order and they want to update the VC details of Sales order in the Long text area).
    One option is after creation of Production order, through BDC(calling CO02 and update the long text) we  can update the long text and client doesn't want this option.
    Another option is after creation of Production order, using Function module SAVE_TEXT, Update the Long text in Production Order and this is not working in Production order (already my ABAP consultant checked it ).
    If any one of you came across this requirement, pl share with me how you addressed it.
    Regards
    A.Sureshbabu

    Hi,
    The method is quite simple, i presume you're quite well versed with doing recording, so the key thing to keep in mind is how to prepare the input file.
    At my end i had about 5 lines of data which needed to be uploaded, hence i had a tab-delimited file with the order nos. in the first column & the five lines of text in five different columns (Refer format below)
    Order No.
    Line - 1
    Line - 2
    Line - 3
    Line - 4
    Line - 5
    12345
    txt - 1
    txt - 2
    txt - 3
    txt - 4
    txt - 5
    67890
    txt - a
    txt - b
    txt - c
    txt - d
    txt - e
    Now provide this input file for your lsmw or bdc program & it will work. You can work with your abaper if you're not so comfortable with LSMW or BDC programming he / she should be able to easily make it work for you.
    Regards,
    Vivek

  • Service Order and Sales Order Integration

    Hi All,
    Through the requirement class settings in customizing, I have managed to generate a service order in the background upon creation of sales order.
    To achieve this I have maintained the following settings:
    Order type = OR
    Sales document item category TAD
    - Item Cat TAD is linked to Requirements Type SERA (SD IMG->Determination Of Requirement Types Using Transaction)
    -- Requirements Type SERA is linked to Requirements Class 203 (SD IMG->Define Requirements Types)
    --- Requirements Class 203 is lined to order type SM01 (SD IMG->Define Requirements Classes)
    I have also maintained my service material 'ZPBK001' in OISD screen. So, system allows me to create a sales order for this service material and service order is generated in the background.
    However, my requirement is to not to generate service order in the background but just create a sales order. Then manually create a service order and also manually enter the sales order as an SDI settlement object in the service order.
    So to achieve this, if I remove the service material from OISD screen, then system doesn't generates service order in the background but gives an Information (not an error or warning) message saying:
    No entry for plant 1200, service object 01 ZPBK001 in table T399A
    Its only an information message and when I tick it as ok then system gives another information mesage saying:
    Error when processing Service order
    So the result is service order is not generated in the background which is fine as per my requirement because I can manually create a service order and then manually enter the sales order in the service order.
    However, during the creation of sales order, is there a way that I dont get these information messages regarding service order not being generated in the background?

    Hi Pete,
    Thank you for your reply. As per your suggestion I have removed the "Transfer of requirements" check from SD IMG->Define Requirements Classes. However, when I create a sales order, system still gives me the pop-up Information message saying:
    No entry for plant 1200, service object 01 ZPBK001 in table T399A which is because I have not maintained service material in OISD screen.
    Also, I get the information message as:
    Error when processing Service order
    The first information message regarding service material is ok. However, is there a setting that I can maintain that I dont get the second message regarding error when processing service order?
    I also checked item category details in VOV7, there is no settings for transfer of requirements in vov7

  • How to List Sales Orders based on Creation Date and Delivery Priority

    Dear all,
    How can we list Sales Orders based on creation date and delivery priority.
    I tried using vl10a transaction code, but there we can see sales order based on delivery date.
    we need to list all sales order based on delivery priority and sales order creation date.
    can any one of you tell me which standard report gives such kind of report. Your suggestions will be highly appreciated.
    Thank you
    Raghu Ram

    Hi Raghu,
    There is no st report available as per your req.
    Using SQVI, you develope one report that is list of sales orders based on your req.
    SQVI is used to convert a Quick View into a query.
    Quick Viewer:
    The Quick Viewer allows you to define reports without having to program yourself. The Quick
    Viewer is especially useful for new users and occasional use.
    Quick Viewer is a tool for generating reports. SAP Query offers the user a whole range of options for defining reports. SAP Query also supports different kinds of reports such as basic lists, statistics, and ranked lists. Quick Viewer, on the other hand, is a tool that allows even relatively inexperienced users to create basic lists.
    Quick View definitions are user-dependent. You can transfer a Quick View into SAP Query in order to make reports, for example, accessible to additional users, or to use the other functions available in SAP Query.
    The following is a comparison of Quick Views and queries:
    Quick Views possess the same functional attributes as queries. However, only basic lists may be defined with Quick Views.
    In contrast to queries, no user group assignment is necessary with Quick Views. Each user has his/her own personal list of Quick Views. Quick Views cannot be exchanged between users. Quick Views may, however, be converted to queries and then be made available to other users in a specific user group.
    Info Sets are not required for Quick View definition. Whenever you define a Quick View, you can specify its data source explicitly. Tables, database views, table joins, logical databases, and even Info Sets, can all serve as data sources for a Quick View. You can only use additional tables and additional fields if you use an Info Set as a data source.
    The Quick Viewer uses various controls. Certain hardware and software requirements must also be fulfilled before you can use the Quick Viewer.
    To define a Quick View, you select certain fields according to your data source that determine the structure of your report. The report can be executed in basis mode with standard layout or may be edited using drag and drop and the other toolbox functions available in WYSIWYG mode.
    Reports created using the Quick Viewer may also be passed to external programs (Excel, for example).
    Call the Quick Viewer using System -> Services -> Quick Viewer (or transaction SQVI).
    Enter the name of the Quick View. Quick View names can contain a maximum of 14 characters.
    Choose Create.
    Enter a title for the Quick View and remarks, if you think they are relevant.
    If you do not want to base your list on a table, use the possible entries pushbutton in the Data source field to select another data source. You can choose logical databases or Info Sets. In addition, you may also create table joins. For further information, see Selecting a Data Source.
    Choose Basis mode if you want to create the list directly with no list design. Choose Layout mode if you want to define the layout of your list yourself.
    SQVI Table Quick viewer – Used to created quick client dependent reports
    Probably the easiest and most flexible way to do this is thru one of the ABAP query transactions.
    Transaction SQVI can do this and it has a very good help function that explains how it works... the drawback is that it is only for one user.
    You can play around with it and see if it meets your needs...
    The query results will come back in an ALV Grid or Excel... you can select what fields are returned, and have a selection screen to enter the search criteria.
    You can get the report by joining the tables VBAK and VBAP.
    If you have any queries, i will forward screen shots to your id.
    Reward points pls.
    Regards,
    Govind.

  • PM Order Settlement to Cost Center(real) & Internal Order simultaneously

    Dear Experts.
    I have a request from client to settle 100% of PM order to Cost Center (real) and internal order (statistical) simultaneously. The purpose of statistical orders is to capture all the expenses (electricity, water, security charges, maintenance, etc...) location-wise. 
    PM Order settlement through statistical IO will contribute to  the maintenance aspect, and other expenses will be captured to statistical IO through financial GL posting. Hence each location will have a unique statistical order maintained.
    In the settlement Profile, I have maintained Order and Cost Center elements as "Settlement Optional" Under "Valid receivers". But the system doesn't allow this settlement. As per my understanding SAP allows settlement (100%) to go only to a single object.
    Appreciate your inputs on this matter.
    Thanks,
    thushantha.

    hi,
    Please check how you maintained the real object in the settlement rule.
    You must maintain both the cost center and internal order on the same assignment line such as:
    CAT:     Settlement receivers
    ORD      ORD_Number   Cst_Center_number         100%   PER
    The system will correctly generate KI178 if you have the following:
    CAT:     Settlement receivers
    ORD      ORD_Number                              100%   PER
    CTR      Cst_Center_number                       100%   FUL
    regards
    Waman

  • Email Notifications through workflow for all Approved and Rejected Orders

    hi,
    i have to send Email Notifications through workflow for all Approved and Rejected Orders to the user who have submitted the order for approval.how could it be done.please send ur solutions.
    regards
    yesukannan

    Hi,
    An option would be use Oracle Alert. Create an event based alert on the table where you have order approvals or rejections. This alert will be raised after inserting or updating this table. Create an action linked to this alert, and choose message as action type.
    This setup can be done under Alert Manager Responsibility.
    Regards,
    Ketter Ohnes

Maybe you are looking for