Org Unit as Distribution Point for Document Distribution

Hello Experts,
I would like to maintain a distribution point for the document distribution. Therefore i still have maintained the distribution point (it is an org unit) in the available communication types (INT, RML,..) in SPRO...->Document Distribution->Define Communication Type.
But now every time when a distribution package will be started for distribution I get an error message: "Function <senden> not possible". The package should be send via distribution type INT to the distribution point.
Perhaps the communication type INT is not maintained for the org unit yet?Where can i do this?
Regards,
Christian

Hi Christian
The distribution point under Type of distribution point and Distribution point is used under the following conditions:
1. If distribution is initiated manually and the Distribution immediately indicator was set without entering an explicit distribution point.
2. If distribution is initiated manually and the
Distribution immediately indicator was not set.
3. If distribution is initiated by an event.
If the "Send to distribution point" indicator is set and no distribution point is entered explicitly, the current user becomes the distribution point if distribution is initiated manually. If distribution is initiated by an event, the user that triggered the event becomes the distribution point.
Follow this Procedure.Also Check all the setting in Define Distributio Types for Distribution type INT
where you mention distribution Point details.You will have to explore alittle bit.
With Regards
Mangesh Pande

Similar Messages

HR report/tranzaction on current and past org unit, position, job

Hi,
Does anyone know the code of the standard report / tranzaction to show the current and the past org unit, position and job for an employee?
Thank you
Adriana

Hi Adriana!
Please try using Headcount Changes report S_L9C_94000095.
Regards!
Woody.

Function module to find wheather a user is heading any Org unit

Function module to find wheather a user is heading any Org unit
Hi Experts,
I need to know if a user(SY-UNAME) is heading any Org unit(Check box marked for Head of own organisational unit in TCODE PPOMA_CRM for position in Basic Data). Is there any FM for this? I am trying to use FM RH_STRUC_GET but not able to find.
Any help would be highly appreciated.

Method get_assignments_of_user of class cl_crm_ppm_um_toolkit solved this problem.

Hierarchy org unit to wad report from MSS

Hello to all.
I have a WAD Report that the parameters for it are: Org unit - as the root, and a year/month.
The report receive an org unit and display data for it and for all org units under it in the Org. structure.
I start the report from the MSS on portal.
In R/3 in table T77MWBBWS I created an entry for that report with Reference char. = "ORG_STRU" instead of "0orgunit".
The report ignores the Org unit that I choose from the MSS selection screen, and starts with the Root Org unit of my Org structure.
What to do in order to start the report with the Org unit that i select and to get results for all the org. units under it ?
Thanks, Pazit Atar

I am also facing same problem.
I want to know how the org unit which is selected on MSS screen is passed to backend R/3 report (which is using PNP logical db)
PLEASE HELP.

Org unit employees time depend

Hello Experts,
I need a help how to build DSO which gives all the employees in org unit & what the position for each employee between 2 dates
Thanks

Hi Alexandre,
Although I could not respond in time, thank you so much for your prompt reply.
I had used the same RHPH_STRUCTURE_READ and passed the appropriate values to it, but it did not populate the required results. I cross checked the results manually, may be some relations issue. But later I tried using RH_STRUC_GET_MULTIPLE_ROOTS and it worked fine.
Meanwhile I had done a workaround with PCH and RH_STRUC_GET and it served the purpose of getting all the Org units, it’s reporting sub-org-units, positions and persons (The deepest structure from the root org unit advised on selection screen).
The solution I used is, I captured the org-units advised on selection screen by user using PCH logical database and then by looping on sub-org units reporting to the main org-unit I populated related positions and persons holding them and assigned it to the PNPCE logical database.
Thank you so much for the help.
Regards,
Mahesh Konade

Determine the Org Unit

Can we find out what methods we have to determine the Org Unit the agent belongs in ABAP?
Please do let me know.
Thanks

Hi Mohan,
Refer the following thread :
Re: Org Unit
Reward points if it helps.
Regards,
Amit Mishra

Find Manager of Org Unit

Hi All,
I would like to find the manager of an org unit. I know there are a bunch of ways to do this (FMs or table look up using the relations...). But my question is, if the manager of the org unit I am looking for does not exists, Is there a way to get the manager of the next level org unit. And, if that manager does not exists, then next level and so on.....
Is there a FM which would give the manager in the above manner. If not, how could this be done.
I appreciate your help in this regard.
Thanks
M

Try this
HR-ABAP issue how to find manager in PA reporting

% distribution of all the employees in a particular org unit

Hello To all,
I am working in Objective Setting and Assessments, I am having a one reporting requirment where I need to show % distribution of all the employees in a particular org unit. I kept 0ORGUNIT in row and Keyfigure 1ROWCOUNT in column,
I have created a formula for % distribution of all the employees -> %GT " No. fo Records"
I am bit confused that weather i should take %GT or %CT, %RT
Wt is difference between that formulas.
Kindly suggest
Thanks
Shalini

Hi Shalini,
%CT gives the share of the result, for example in a Regios if you have 10 employees then for each row it gives the employee share for that Region.
%GT gives the share of the result from the Grand Total, for example if you have 10 regions then it caluculates each row it gives the employee share from all the Regions Grand Total.
%RT gives the share from the Report Result for each employee.
In your case you need to use the %GT, then for each region result area it gives % of distribution of all the employees.
Hope this helps.
Veerendra.

Problem with option: enable this distribution point for prestaged content

Hi, for past few days I have been focused on application deployment with SCCM 2012 R2 (I am learning SCCM 2012 R2 reading books, watching video trainings . . .). Having followed allong book Mastering System Center 2012 R2 Configuration Manager I also did
deployment of Microsoft Office 2013, Adobe Reader 11, Foxit Reader 4.2 and Notepad ++ to test collection containing one Windows 7 computer. In one of examples prestaged content file is created for Foxit Reader application. In order to do so, if I am
right, option Enable this distribution point for prestaged content
has to be checked on distribution point and I did that.
Problem is that I noticed deployment of any application to test collection failed every time - system waits for prestaged content file if this option is selected. Then I have to delete deployment of given application, application itself, deselect option
Enable this distribution point for prestaged content and create app, distribute it to DP and deploy to test collection - then everything works well.
To make things worse, having deselect option Enable this distribution point for prestaged content (I did it yesterday and I checked that several times) this morning I checked again and this option is selected again. What might be the cause
of this behaviour? I expected this option to be deselected - this is weird to say at least.

When you enable the option "Enable this distribution
point for prestaged content" on a DP, it causes newly created applications/packages to default to "Manually copy the content in this package to the distribution point"... This would then cause the deployments on the clients to remain
at 'waiting for content' - unless if you manually prestage the content, as this option requires it.
If you enable the option "Enable this distribution
point for prestaged content" on the DP, but want to automatically have CM distribute the content, then configure the app/package to do so,
before distributing the content: Distribution Settings tab > Prestaged distribution point settings > Automatically download content when packages are assign to distribution points.

Need to Deploy Distribution Points for 700 Offices on Windows 7 Systems with 128kbps of Bandwidth

Hello Everyone,
Need to deploy Distribution Points for 700 sites on windows 7 with 128kbps of link.During Office hours DP fails as entire 128 kbps of link is utilized.During non business hours it gets succeeded.
Setup for SCCM 2012-
1 Primary Server at DC
Secondary Server @ HO
100 DP's already created on link of 128 Kbps
Is there any option of creating Offline DP's in 2012......
How can I fastern the Process of DP Creation??????
Any help would be highly appreciated.......
Regards
Saurabh

Hi Jeff/Torsten,
Thanks for the revert.
Just to inform you that I need to Create fresh Distribution Point on Windows 7 systems as above technet link is used once you have setup distribution points if you need not have to utilized your 128kbps bandwidth in that scenario I can prestage the content
and copy that content on remote DP.
Please correct me if I'm wrong.
Regards
Saurabh

BAPI or FM for NCOP Transaction (To assign Cost Center to Org Unit)

Hi,
We are searching for a BAPI or any other means to assign Cost Center to Org Unit.
recording this transaction is not so useful because the screen fields are not recorded properly.
Please advise if you had come across this transaction.
Thanks in advance,
Nagu

Hi Prasad,
This is one of the answers i found in SDN itself check this
PP01> select the Object type (Org Unit)> enter the Org Unit No
Select the Cost Distribution Infotype--> Create & enter the Cost Center
Reward if it helps,
Satish

Display of total ansal for each org unit using the sdepth (depth level)

Hi all,
     We have a requirment in which we will be getting all the active employees related to a perticular org unit then For every PERNR,we need to find (as of run date) the org ID on PA0001- ORGEH and total the dollars at the org unit ID level started at the org unit defined on field ORGID and only as far down as defined on selection screen field SDEPTH.
       Example: $10k under Dept D, $9k under Dept C, $8k under Dept B and $7k under Dept A. If field SDEPTH was set to blank, each department would be assigned the above stated budget amount. If SDEPTH was set to 3, the budget would stop at the third level down the org chain (assuming A is the org unit defined in field ORGID, org unit C would be the third org down the chain). The total budget at level C would incorporate any dollars calculated from employees that fall below this org unit in the structure. In this example, the total for org unit C would be $19k, B would remain at 8k and A at 7k.
    We are making use of the FM : RH_STRUC_GET to get all pernr numbers related to a perticular org unit and sub level units separately and also RP_ANSAL_FROM_WAGETYPES for getting ansal based on the wahge types (multiple wage types can be provided by the user on the selection screen) .
Please let me know how can i achive the requirement.
Regards,
Zareena.
Edited by: zareena molla on May 20, 2008 7:14 AM

Thanks Dan.
Appreciate if you can help on the below points as well.
1. As part of divestiture/transfer postings: The system is reversing some Previous Year(PY) equity accounts into themselves. How can we get the system to eliminate them by posting to COI Clearing account. Basically, we dont want the PY accounts to be touched?
For the Retained earnings - PY account, the system is actually posting to COI clearing account.
These PY accounts are part of some scopes for equitization.
Is there any link between the "balance carry forward" - list of items table and the divestiture postings?
Does the system check this table while posting/reversing the equity(PY) accounts?
2. I want to understand the sequence in which the system posts the documents at the old parent and new parent (group) level.
The same activity number is there for Total Divestiture, total transfer documents posted at new parent level and total divestiture document posted at old parent level.
Does the system follow bottom up approach? Thereby creating total divestiture document at old parent level.
Followed by documents at upper level (new parent level)
Also , at the upper level(new parent level), does it post documents in the way they are shown in the log? (We havent changed the default sequence maintained in UCWB - COI settings). so it will post first consolidation doc, followed by total divestiture, followed by total transfer docs at the new parent level?
Is this the reason for the double value being posted at new parent for equity holding data?
Will studying the statistical items (corresponding to eliminated equity holding items) be relevant here to understand why at upper level there is double the value being posted by system?
Thanks.

Org Unit Asssignment for Activities

Hi,
We have recently upgraded from CRM 4.0 --> 5.0 SP 11, for certain individuals who now create data in the mobile applicatio and conntrans it , the Organizational Unit is not being assigned to the activities that they are creating. The Sales Organisation and Distribution Channel get passed up/assigned correctly.
What may be causing this to occur. Note, this is only effecting certain individuals as others who create activities/transactions in the mobile application and contranns it up, the data is assigned correctly (the Org Unit is assigned).
Any help on this would be greatly appreciated,
Thanks,
Dan

Dear Raul,
This means the org unit has an incorrect status to allow for activation The activation program checks that the org. unit has the status 'Approved' or, if no responsible approving manager exists in the system, the status 'Complete'.
When the status of the org. unit is approved using the planning overview, this status is written to the process support table
rather than the infotype 0759. The status in Infotype 0759 remains 'Submitted'.
In order to activate the records, you therefore want to enter Process status from = 'Submitted,' and Process Status to = 'Active' in report RHECM_CHANGE_PROC_STATUS.
Report RHECM_CHANGE_PROC_STATUS allows such entries if:
1. Customizing view V_T71ADM26 has 'Enable Approval Process' checked. (which is the case in your system for MS11 and you are then approving using the planning overview).
2. The status of the org. unit(s) to which the employee is assigned is approved.
Please note that the second check mentioned (which prevents the activation of records which have not yet been approved) is only performed after note 1478804 has been implemented in your system.

Issue in PPOMA_CRM (BP's for Org units level1, level2 is not created)

Dear Gurus,
I am facing this issue in Solution Manager , where i have created Org Model in Tx: PPOMA_CRM.
The Coloumn (Business Partner) in this Tx does not show any number assigned to the group.
I deleted the whole structure and recreated it but , it was in vain.
I want to "Map"/"Link" the field "Support Team" in the Service desk ticket to the "Org Model " created in PPOMA , but i am stuck here .
I have also created "RULES" to automatically detect the Support Team using Tx:PFAC , but it does not work either.
Will you please direct me to some document other than "Adv setting doc for Service desk for Solman EHP 1" or any other blog or any suggestion where i can pin down the cause of this error and resolve it.
Thanks in advance.
Regards,
Victor

Hi
please look this thread [Org Unit Business Partner number missing |Org Unit Business Partner number missing;
[Problem with Integration of Organizational Units & BP |Problem with Integration of Organizational Units & BP .;
Thanks,
Jansi

Transfer one position from One Org unit to another -For multiple positions

Hello All,
I want to know is there any easy way to transfer one position form one org unit to diff org units? I dont want to delete the position, infact I want to transfer the same position (the position Id will remain same) to another org unit.
I need to do multiple positions, hence pls suggest an easy way to do so.
I know it can be done thorugh PPOM -by drag & drop option , but the transfer record does not get stored in IT 0000 (actions) for the respective pers no.
Hence, I want to easy wat, where we can do it for many positions , aslo the record gets stored in IT 0000. I tired with PA40, transfer action....
but still more easiest way?
Thanks in adv,
N.babu

Hello Nithi,
Have a look at this link.It may help you.
http://doa.louisiana.gov/hrhelp/content/orgm-changereportingstructuretoadifferentorganizationalunit/cc/html/index.htm
Reward points if helpful.
Regards,
Manoj.

Org Unit as Distribution Point for Document Distribution

Similar Messages

Maybe you are looking for