Org Unit Asssignment for Activities

Hi,
    We have recently upgraded from CRM 4.0 --> 5.0 SP 11, for certain individuals who now create data in the mobile applicatio and conntrans it ,  the Organizational Unit is not being assigned to the activities that they are creating. The Sales Organisation and Distribution Channel get passed up/assigned correctly.
What may be causing this to occur. Note, this is only effecting certain individuals as others who create activities/transactions in the mobile application and contranns it up, the data is assigned correctly (the Org Unit is assigned).
Any help on this would be greatly appreciated,
Thanks,
Dan

Dear Raul,
This means the org unit has an incorrect status to allow for activation The activation program checks that the org. unit has the status 'Approved' or, if no responsible approving manager exists in the system, the status 'Complete'.
When the status of the org. unit is approved using the planning overview, this status is written to the process support table
rather than the infotype 0759.  The status in Infotype 0759 remains 'Submitted'.
In order to activate the records, you therefore want to enter Process status from = 'Submitted,' and Process Status to   = 'Active' in report RHECM_CHANGE_PROC_STATUS.
Report RHECM_CHANGE_PROC_STATUS allows such entries if:
1.  Customizing view V_T71ADM26 has 'Enable Approval Process' checked. (which is the case in your system for MS11 and you are then approving using the planning overview).
2.  The status of the org. unit(s) to which the employee is assigned is approved.
Please note that the second check mentioned (which prevents the activation of records which have not yet been approved) is only performed after note 1478804 has been implemented in your system.

Similar Messages

  • Display of total ansal for each org unit using the sdepth (depth level)

    Hi all,
         We have a requirment in which we will be getting all the active employees related to a perticular org unit then  For every PERNR,we need to  find (as of run date) the org ID on PA0001- ORGEH and total the dollars at the org unit ID level started at the org unit defined on field ORGID and only as far down as defined on selection screen field SDEPTH.
           Example: $10k under Dept D, $9k under Dept C, $8k under Dept B and $7k under Dept A. If field SDEPTH was set to blank, each department would be assigned the above stated budget amount. If SDEPTH was set to 3, the budget would stop at the third level down the org chain (assuming A is the org unit defined in field ORGID, org unit C would be the third org down the chain). The total budget at level C would incorporate any dollars calculated from employees that fall below this org unit in the structure. In this example, the total for org unit C would be $19k, B would remain at 8k and A at 7k.
        We are making use of the FM :  RH_STRUC_GET  to get all pernr numbers related to a perticular org unit and sub level units separately and also RP_ANSAL_FROM_WAGETYPES for getting ansal based on the wahge types (multiple wage types can be provided by the user on the selection screen) .
    Please let me know how can i achive the requirement.
    Regards,
    Zareena.
    Edited by: zareena molla on May 20, 2008 7:14 AM

    Thanks Dan.
    Appreciate if you can help on the below points as well.
    1. As part of divestiture/transfer postings: The system is reversing some Previous Year(PY) equity accounts into themselves. How can we get the system to eliminate them by posting to COI Clearing account. Basically, we dont want the PY accounts to be touched?
    For the Retained earnings - PY account, the system is actually posting to COI clearing account.
    These PY accounts are part of some scopes for equitization.
    Is there any link between the "balance carry forward" - list of items table and the divestiture postings?
    Does the system check this table while posting/reversing the equity(PY) accounts?
    2. I want to understand the sequence in which the system posts the documents at the old parent and new parent (group) level.
    The same activity number is there  for Total Divestiture, total transfer documents posted at new parent level and total divestiture document posted at old parent level.
    Does the system follow bottom up approach? Thereby creating total divestiture document at old parent level.
    Followed by documents at upper level (new parent level)
    Also , at the upper level(new parent level), does it post documents in the way they are shown in the log? (We havent changed the default sequence maintained in UCWB - COI settings). so it will post first consolidation doc, followed by total divestiture, followed by total transfer docs at the new parent level?
    Is this the reason for the double value being posted at new parent for equity holding data?
    Will studying the statistical items (corresponding to eliminated equity holding items) be relevant here to understand why at upper level there is double the value being posted by system?
    Thanks.

  • Retrieving Positions for Specific Org Units

    Hi All,
    I have a headcount report to develop. It will run for one personnel area at a time. So for the period run, I have to list out all the org units under the personnel area as well as the sub org units. For each of the org units I have to separate positions under them into two group - total of positions with holders and non-holders.
    I am using the function RH_STRUC_GET by passing org unit to retrieve positions. May I know which result table to read in order to get positions and how to segregate them into 'With Holders' and 'Non-Holders'?
    And also how to get the relation ship between org units because I need to display that in the report also.
    Thank you in advance
    Regards,
    Lily

    Hi..
    Existing Organizational Units (Report RHXEXI00)
    Staff Functions for Organizational Units (Report RHXSTAB0)
    Organizational Structure with Persons (Report RHXSTR02)
    Periods for Unoccupied Positions (Report RHFILLPOS)
    Existing Positions (Report RHXEXI03)
    Staff Assignments (Report RHSBES00)
    Position Description (Report RHXDESC1)
    Staff Functions for Positions (Report RHXSTAB1)
    Vacant Positions (Report RHVOPOS0)
    Obsolete Positions (Report RHVOPOS1)
    Complete Position Description (Report RHXSCRP1)
    Reporting Structure without Persons (Report RHSTR05)
    Reporting Structure with Persons (Report RHSTR04)
    Activity Profile of Positions (Report RHXSTR07)
    Activity Profile of Positions with Persons (Report RHXSTR08)
    Existing Objects (Report RHEXIST0)
    Structure Display/Maintenance (RHSTRU00)
    Reporting on an Infotype (Report RHINFAW0)
    Starting an HR Report (Report RHPNPSUB)

  • Reg: Workitem forwarding issue in SC workflow to a org unit

    Hi,
         I have a problem in Shopping cart workflow.
    When I try to forward the work item, the system is allowing me to forward it to only one person.
         I have two options. Please help me to achieve any of the two options.
    Option1 : To forward it to list of users
    Option2 : To forward it to an org.unit.
         For the first option, I dont have to facility to add two or more users.
         For the second option, I need to enable the search facility to search for org.units or convert this search into a collectiv search.
         Please help me to achieve any of this two options.
    With Thanks and Regards
    Ravishankar Vembu.
    Edited by: ravishankar vembu on Oct 30, 2008 1:58 PM

    Hi,
    Option1 : To forward it to list of users
    To forward it to list of users. say for example 5 users.
    in SU01d, the email should be common e mail
    test at the rate of usa.com for all the 5 users
    .So when you are forwarding the email to test at the rate of usa.com it will go to all the 5 users.
    Please try it will work
    G.Ganesh Kumar

  • Cost Center Inheritance from Org Unit

    Good day all,
    Can someone please advise regarding cost center inheritance from org units?
    I understand the inheritance concept, however simple need to know if the CCenter is added to the org unit via A011 relationship, does the system physically create a A011 relationship on the position inhertiting the cost center from the org or does the system simply pick up the realtionship from the org unit relationsip for use in IT0001 field KOSTL (cost center)?
    Thanks guys, have a lovely day!
    Christy

    Hi Christy,
    As we know cost centre(K) is an unusual object in OM.Two type of objects internal  whose master record are in database table beloging to sap erp hcm and eexternal object whose master data belong to other application areas.Cost centre is an external object that is used to represent origin of costs.Inheritance concept is on the basis of whoch cost centre are assigned in org plan.
    directly related cost centre is called master cost centre and they are made via A011 cost centre assignment relationsip.they can be made at org unit,position or work centre and nornmally its org unit that common.Org unit at the top are asisgned the cost centre as a best practise so that all the org units below or reporting will inherit the same.
    Similarly multiple cost centre assignments can also e made through 1018 infotype(cost centre distribution).Inheritance also applied to them aswell.
    Hope this helps.
    No Worries
    KG

  • Org Unit replication ECC to CRM

    Hi Experts,
    Here is the issue:
    A Sales order is created in ECC and replicated to CRM. Based on this SO, we need to create returns in CRM. Now the SO is replicated to CRM with errors. So in CRM, error says: Org Unit is not determined.
    Sales Org, Dist.Ch and Div is replicated but Org Unit is not replicated as there is no Org Unit concept in ECC.
    Now how do I get out of this error in CRM Sales Order doc?
    Checked in Org Management in CRM. There is no Org Unit existing for that Sales Org which is determined. So how do I make CRM SO error free. Any thoughts from experts would greatly be appreciated.
    Thanks,
    John

    An organzation unit is simply what it means, which is logical representation of some business entity or department.  In CRM an organization unit can refer to a sales or service organization and has an attribute assigned to it, that designates what it represents.
    We typically call a organization unit that has the following attributes maintained a sales area:
    Sales Org
    Distribution Channel
    Division
    The function tab of the organizational unit is where I assign the corresponding R/3 sales area.  We then use the attributes tab in scenario sales to assign the remaining data.  This data usually is the allow division and distribution channels, along with the corresponding "tupels".  The tupel is the combination of the distribution channel and division.
    You also need to mark the the object as permitted in determination, in order for it to be used in transactional processing.
    Take care,
    Stephen

  • Possibility of Focusing to a Specific Org Unit ?

    Hello Everyone,
    We are using Nakisa v4.1 and a live build. I wonder whether the below action is possible or not;
    When a manager logs into the system, the OrgChart Module will display all the organizational units BUT will focus to the organizational unit that he/she is the manager of ? I mean the screen will zoom to that organizational unit he/she is managing at the moment he/she logs in ? Is there any customization on Nakisa Admin Console or R3 side for this or it is not possible at all ?
    Thanks,
    Regards.

    Tunc.
    I think this is worth a little debugging at this point to confirm the data is mapping as you expect it to.  Once you are logged in to OrgChart and getting the infamous error message, open a new tab in your browser and navigate to the debug page.
    This is done by substituting "default" with"nak-debug".  So for example if your OrgChart URL is http://myorgchart/OrgChart/default.jsp, then your debug page URL is http://myorgchart/OrgChart/nak-debug.jsp.
    On the debug page, look in your "User" table at the "User Population" row.  The value should be a list of parameters.
    e.g.
    {null=TESTUSER, Costcenter=0000002110, LANGUAGE=, Nak_ExportStructureTable_Count=1, Position=00130049, Name=Ludik, CPID=, IM_EMPSTAT=3, BUSINESS_AREA=9500, PLVN_VERSION=, Perno=00900349, PERSONNEL_SUBAREA=, EMPLOYEE_GROUP=1, Userid=TESTUSER, Nak_EMPLOYEE_DATA_Count=1, CONTROLLINGAREA_ID=1001, KEY_DATE=, PERSONNEL_AREA=1400, Org_unit=50006110, EMPLOYEE_SUBGROUP=DU, Job=50063947}
    The parameters you are interested in are...
    Userid - this should be the user ID of the account you are logging in with.
    Perno - this should be the employee number for the account to which the login ID is associated.
    Position - this should be the position ID for the position the employee is assigned to.
    Org_unit - this should be the org unit ID for the org unit the position is assigned to.  This is what I would expect to be mapped as the root of your org chart.
    Note: All entries must of course be valid for the current date.
    See if these parameter values match up to what you expect them to be.  Also see if you can find these org unit, position and employee (personnel number) entires via OrgChart's listings.
    If something doesn't match up then that's what you need to investigate next.
    Regards,
    Stephen.

  • Users within an org unit

    Hi,
    is there a function module or a table by which we can find all the users within a purchasing group of purchasing organisatiopn unit.
    Looking for a quick response.
    Regards,
    Neha

    Hi Neha,
    Just run this FM
    BBP_OM_STRUC_GET_USER_FROM_ORG
    2.click on  START_OBJECTS
    3. Under OT just type O and under OBJID provide the Org Unit Number for ex 50000123
    4.Click on Back Button and Execute
    5. Under Export Parameters you wil find  a internal table called "USER_TAB" with list of entries
    6.Click on that , there you will find the list of users under that particular Org unit
    Sameer

  • Best Practice - Changing description for Org Unit/Position or creating new?

    Hello Freinds,
    I just want to know from your experience what's normally practiced in your implementations for OM :-
    For scenarios where there is a need to change the description of a particular org unit or position, do u
    1. just change the description effective a particular date (to maintain history) or
    2. put an end date to those objects and create new ones ?
    Solution 1 is quick and easy, but in IT0001 the description displayed is as on start date of that infotype which is normally a date prior to the change in desc of those objects. As a result this infotype keeps displaying old description.
    Is there any way to change this display to show the current description instead of the description as on start date of this infotype ???
    Solution 2 calls for a lot of related activities, say if i create a new org unit and delemit the old one - then i have to move all the sub org units and positions into this new one ... which is quite time consuming and doesn't really seem practical.
    How do u manage such scenarios ?
    Thanks
    Allen

    We use option #1, although I am not sure this is best practice.  Using option 1 for positions makes it challenging when it comes to reporting on length of time in position.  We frequently have the scenario where a person is reorged not because they applied for another position, but just because the big wigs want to move around the chess pieces.  In these cases we simply modify the position attributes and then run a PA action.  Then if you run a query and use the standard delivered Length of time in position field, it appears as if the person has been in the same position for years (which they have), but their position has been retitled, re-graded, and re-orged numerous times.  This makes it very difficult to get to an employee's length of time in their role. 
    This is a great discussion question I hope more people respond with what they do and why.

  • Org Unit that controls shipping activities

    Question- Which is the org unit that controls the shipping activities of goods?
    Ans-1. Plant and storage location
    Ans-2. Shipping point
    Ans-3. Distribution channel
    Which one is the correct?

    Hello,
    SHIPPING POINT is responsible organisational unit for shipping. and shipping activities
    As you aware for delivery creation the SHIPPING POINT is mandatory.
    The definition of SHIPPING POINT clearly says as,
    Shipping point is an Independent organizational unit that performs shipping processing. You can have many shipping points for a plant but delivery is possible thorugh only one shipping point
    The Organisation unit which falls under the LOGISTICS EXECUTION is shipping point and you can find the  the organisations units under LOGISTICS EXECUTION which are also responsbible for shipping like, loading point, transportation planning point.
    In your question it is the SHIPPING POINT which is controlling the shipping activities

  • Activities under a delimited Org unit

    Hello,
    We have recently implemented EIC.
    Have a simple query,if we delimit a particular Org unit,whether activities under that Org unit can be processed or not.
    Thanks & Regards,
    sushil

    >
    > Hi,
    > Where are you stuck?
    >
    >
    HRP1000 table, field - OTYPE(check for "O" for org unit).
    > get the difference between BEGDA and GDATE(delimited on) and check if it's more than two years.
    >
    > Regards,
    > Sumit
    I want ORG UNITS whose END DATE is within 2 years????
    I Will give you scenarios
    If HRP1000 table has changed for some reasons'  and 5000(ORG UNIT) will create 2 records
    Ex: 5000  jan 1 2005 dec 31 2009
                    jan 1 2010 12/31/9999
    This 5000 should't pick up as it has end date 12/31/9999 ok...
    EX: 5001         JAN 1 2006  OCT 1 2007
                           OCT 1 2007   MAY 5 2009
    Last record:    MAY 6 2009  Feb 6 2010
    So this 5001 org unit should pick up as this last date is FEB 6 2010.
    Sas
    Edited by: saslove sap on May 3, 2010 1:59 PM

  • How to Restrict Creation of Infotype Record for Certain Org Units?

    Dear All,
    Requirement:
    Org Unit 1 does not have overtime. Even the employee works overtime, they will not get overtime compensation.
    One of the option is to disallow the creation of IT2005's record for all the employees in Org Unit 1.
    Is it possible to do this through standard SAP?
    Thanks a lot.

    Hi,
    The best way to control this will be with Authorizations so that people belonging to one Org.unit should not have IT2005 mantainence.
    Let me know if u have any concerns on this.
    Thanks
    Swati

  • Automatic creation of an account for org unit

    Hello Experts,
    System automatically creates an account for organisational unit with the role organisational unit. But when i am creating a new organization model, the org units are not created as accounts.
    Kindly suggest me,
    Thanks and Regards,
    Lakshith Rao

    Hi Lakshith Rao,
    For some reason BP number must not have got generated for your Org. Could be because of some errors.
    Go to SPRO-> CRM-> Master Data-> Business Parnter-> Integration Business Partner - Organization Management-> Create Business PArtner Initially.
    Select Org. Unit and search and select your org. unit. Click on execute.
    If there are no errors in your org. unit then BP number will get generated or else it will mention what data is missing.
    Cheers,
    MG

  • Empty start validity date for an org unit

    Dears!
    some time ago we discovered a disturbing issue in Productive data. Some org units have an empty start date. I have no idea how it could be created by users, but now we need to solve it.
    The records with empty start date are visible in PP01 only in Display mode.
    The program RE_RHBEGDA0 (New start date) doesn't help. After running the new record for an object is created but there is still remaining the record with empty start date, but with shifted end date...
    Do you have any idea how to solve this?
    Thanks all in advance,
    Anastasia

    Hi,
    You are right - user definitely couldn't create it. Probably you need to ask you ABAPer.
    I can suggest you to try to copy original record and replace empty start date with valid one: PP01, IT1000, copy, change start date, save.
    Cheers!

  • Multi Languages for Org Unit

    Hi experts,
    Is it possible to have 2 sets of language for abbr and name in IT1000 for org unit in the same period?
    example:
    Start Date : 01.01.2008
    Language: English
    Abbr: HR
    Name: HR department
    Start Date : 01.01.2008
    Language: Chinese
    Abbr: HR
    Name: HR department (Chinese)
    Regards,
    Joanna

    Hi,
    It is possible.
    But before that need to chk with basis guys whether unicoding is enabled or not.
    If Yes the chk chineese script is enabled or not.
    If yes then maintain the orgunits in english language by entering SAP in English language (U can find the language seletion field in log in screen).
    Upload the orgunits. then go to Tcode RE_RHTRANS0 to put the names in Chineese.
    This is one option.
    2nd option is prepare the excel sheet with Chineese language with orgunit keys. Log in into SAP in Chineese language.
    Upload the data.
    ~BiSu

Maybe you are looking for