Organization plan active / inactive?

Hi All
If we have more than one organization structure in our SRM sytem. How to make a particular organization plan active / inactive?
regards
Sandeep kumar

I have the same problem! Is there any solution ?

Similar Messages

Table name to display status for maintenance plan with active /inactive status

i need status table which display only active/inactive status of the maintenance plan.

really it helps me ..........
thanks raymond
regards,
priya

We work with SRM 5 Ext' Classic & report based on organization plan

Hello expert,
We work with SRM 5 Extended Classic scenario and BW for reports.
We have a lot of purchasing types and we need a good report that can give as a clear picture of the purchasing process according to the organization units (departments). We have one purchase organization and a lot of purchase groups, and the way that the system is built doesnu2019t support this requirement. We need a report that is based on the organization plan.
For example:
We need the option to extract all HR unit purchase documents or all direct supply goods that are purchased by the supply chain department. The report also needs to give a clear picture of the purchase operations and costs of every unit.
Thanks,
Gil

Closed but Unanswered

Error while adding user in organization plan

Dear all,
When I try to add user in organization plan through users_gen, it raises an error 'Action cancelled'. Currently this user has only 1 node in the plan whereas it should have 4.
What can be the problem?
Regds
Amit

Dear Anita/Muthu
Thanks for your replies. Note 1055921 is not relevant for my process. Email Id etc is maintained for the user.
I have made one single user through SU01. Then I am using USERS_GEN, I am giving country code, org ID. Then system asks " area of user", I enter the userid. After that, this error comes.
Default country is US and no tax system is there in SPRO. I am using SRM component version 5.0.
I am lost!
Regards
Amit

Purchase Requisition Workflow - Organizational Plan required?

Hi,
We are implementing purchase requisition workflow.
Based on what I have read, it says that the workflow table (table V_T16FW) and SAP HR-PA-OM (organizational plan) must be set up to support the solution.
Question: If we are routing the workflow to a UserID, i.e. Object Type = US (and not an HR data object like Position or Job), do we require an Organizational Plan to be also set up?
Cheers,

Thanks so much for your response.
What about assigning tasks to users, etc. that is usually done in org plan, correct? If object type US is only used, I assume this is not required either?
Also, what is the benefit of using Object type = 'S', i.e. position? At my company, most of the time, when people leave, the position is deleted and a new one is created (there are a couple reasons for this), which means, even if we did use positions, the workflow table would still need to be maintained everytime a person leaves/joins the company (I understand if only the user to position mapping changes, then it makes sense to use positions, and therefore the workflow table stays constant, and only the user to position mapping changes). Are there any other benefits of using S instead of US?
Also, is it possible to NOT use a workflow table, and ONLY define an organizational plan? I was thinking to activate user exit M06B0001, and perhaps ONLY maintain an org plan, and use this to determine approver, rather than maintaining both MM workflow table and SAP Organizational Plan (HR-PA-OM). Bottom line, we want to maintain as little data as possible.
Your thoughts?
Cheers

Cash discount - F-28 - how to control Active / Inactive setting

Hi All,
When I try to post incoming posting through F-28 for a customer and choose the open items, the cash discount value is INACTIVE.
But when another user tries to post incoming payment for the same customer, Cash discount value is ACTIVE.
We are building a custom program for clearing the open items, so this is causing some discrepancies in the amount to be posted.
We checked the editing options(OPEN ITEMS tab) and it looks same for both of us.
Can anyone please let me know if there is any setting through which we can control the cash discount (ACTIVE / INACTIVE)
Thanks in advance.
Krishna

Please try executing f-28 once again and check case discount column, if it is not there, execute transaction /nSU53 and check the authorization which is missing in your case.
Hope this helps!!!
Regards,
Murlidhar Khatri

Change status(Active/Inactive) of file adapter by the external command

Hi, all.
Is it possible to change status(Active/Inactive) of file adapter by the external command?
Let's say, like
"$ switch_file_adapter_status.sh <File Adapter name> <active|inactive>"
or something like that.
Actually, we have the following requirement for the file adapter.
For example, we have many "file adapter to R/3" scenarios and we only want to allow data transfer between 9:00 a.m. to 9:00 p.m.(R/3 service time).
In order to achieve this requirement, one option would be to switch file adapter status between active and inactive by external command line.
And this command will be controlled by the job scheduler(like Tivoli).
Does XI(3.0 or above) have this kind of feature?
Best Regards.

Hi,
I don't think that this is possible.
But one Solution for your problem could be a job on xi who execute the Queue.
So that Adapter work the hole time and send the Message to XI Queue which process them not automatically.
And the XI Queue you can trigger with a Job like normal R/3 Jobs.
Hope that helps,
Regards,
Robin

To build the organization's Active Directory permissions are what we need

To build the organization's Active Directory permissions are what we need

what is your actual question? Can you be more specific?
Santhosh Sivarajan | Houston, TX | www.sivarajan.com
ITIL,MCITP,MCTS,MCSE (W2K3/W2K/NT4),MCSA(W2K3/W2K/MSG),Network+,CCNA
Windows Server 2012 Book - Migrating from 2008 to Windows Server 2012
Blogs: Blogs
Twitter: Twitter
LinkedIn: LinkedIn
Facebook: Facebook
Microsoft Virtual Academy:
Microsoft Virtual Academy
This posting is provided AS IS with no warranties, and confers no rights.

Planned Activity and Actual Activity Fields & relevenat table

Hello,
Can any one pls let me know the field and Table names for the following two fields (need for preperation of a report):
PLANNED ACTIVITY: - Production Order confirmation Planned Activity column
ACTUAL ACTIVITY: - Production Order confirmation Actaul Activity column
thanks & regards
Chaitanya Rayaprolu

Hi,
Procedure :
go to the feild(Cursor in feild) press"F1" for help ( Pop up will appear )
click on "technical help"( Icon with cross planting of hammers)
from the small popup u can get Feild name and table or Struc.
copy the feild name.
go to Transaction "se16"(Tables) enter "DD03L" ( data base table ) and press enter.
enter the feild name ( Copied earlier ) in feild name block and execute(F8) the table.
You will see all the tables and structures containing the particular feild.
This is the best solution to be self sufficient.
please close the thread after testing the solution...and appreciate your reward.
Prakash

Missing Account information when creating Planned Activity in Account

Hi Expert,
When creating planned activity in Account inwebUI, I am expecting that the Account information would be populated in the Account field of a planned activity but it is not. Could you please tell me if this is a SAP standard? Thanks

Check Partner Determination Procedure of Activity Transaction
regard,
vijay.

Doubts in Organizational Plan in SUS

Hello everyone,
I need your help. I am working in a SUS implementation (for SRM 5.0). I have been checking about the definition of the organizational plan in SUS and I have doubts.
I checked that is essential the vendor organization in transaction PPOCV_BBP, could you tell me if I have to define the same in SRM an SUS??
Also, I checked and It is necessary define purchasing organization (PPOMA_BBP) and I want to know if I need to define all the purchasing organization from SRM
Thanks,
Ivan

If you look at the names of the components of SRM , you can realise what khan says easily.
SRM is a broad term and comprises further components
EBP Enterprise Buyer Professional
SUS Supplier self services &
ROS Registration of suppliers
All these functionalities or software components are bundled in SRM server
so technically can be bundled on client
but not advised by SAP for security reasons
Now the purchasing client (or server ) is EBP
responcible for purchasing
so should have the purchasing organisation and depts
and internal users with necessary attributes.
SUS client (or server) is for vendor data
so should have vendor root node with necessary attributes.
Hope it helps
BR
Dinesh

Planning activity price in various currency

Hi,
I have controlling area with currency EUR and two company code linked to it:
Company code A with currency EUR
Company code B with currency MXN
Is there any way to plan activity price in USD?
Thanks in advance
Regards

Hi ,
THere are 3 currencies which are available in CO. One is the CO Area currency ( the currency maintained in the CO Area ) , Second is the Object currency ( the currency maintained in the Object , if it is a Cost Center , then the Object currency will be the Company code currency to which the CC belongs to ) and Third is the Transaction currency ( the currency in which a transaction is posted , be it Plan transaction or Actual transactions ) .
You can enter cost element planning using any of those currencies ( by creating user defined layouts if std layouts do not suffice requirements ).
Activity output has to be planned in terms of quantities in Cost Centers.
Activity price is to be computed automatically in the system ( recommended ) . Activity prices are always maintained in only two currencies , Object currency and Co Area currency. All activity transactions will happen using the Object currency so that the absorption on Cost Centers is always proper.
We cannot have activity prices maintained in transaction currencies. Is there a real justification and a business reason to have the price to be maintained in USD ? Please let me know.
Regards,
Venkat.

Planned Activity column in overview screen of KP26 is disabled

Hi,
I am getting Planned Activity column disabled in the overview screen of KP26. So, unable to enter plan data.
Please help.
Thanks
Manish

Hi Manish,
Please check the Activity Type Category. Probably It would be 2.
If it is 2 then change the same to 1 and try KP26. The other categories are as follows:
1     Manual entry, manual allocation
2     Indirect determination, indirect allocation
3     Manual entry, indirect allocation
4     Manual entry, no allocation
Bye
Robin

Data source active/inactive button grayed out in LBWE

Hello,
When I was activating the Logistics datasource in LBWE, my data source status became red and the Active/Inactive button grayed out? how can I make this data source active again?
Thanks,
KK

Hi Kumar,
The status will become Red and Active/Inactive is disable due to Extract structure activated but data source is not maintained. This happens once you change the extract structure to Include additional fields. Please do the below step:
in LBWE, Click on Data source (Technical name of your data source beside maintainance) and you will get maintainance screen, change if you want some thing or else leave as it is and save, Now the status for data source in LBWE will become yellow and activate/deactivate will enable.
Regards,
Kams

[SOLVED]What is the meaning of any/active/inactive session in polkit?

Wiki said ｢inactive sessions are generally remote sessions (SSH, VNC, etc.) 」.
So I changed the *.policy file like below to execute the action without password only when I am logging in remotely.
(Just for clarifying the difference between any/active/inactive session.)
<allow_any>no</allow_any>
<allow_inactive>yes</allow_inactive>
<allow_active>no</allow_active>
Contrary to expectations, I couldn't execute the action remotely without password.
So I changed again like below.
<allow_any>yes</allow_any>
<allow_inactive>no</allow_inactive>
<allow_active>no</allow_active>
This time, I was able to execute the action remotely without password.
From the above, I think the remote session is neither active nor inactive.
Is it true? If so, what is the inactive session?
What is the definition of active/inactive?
Last edited by remingtontonpon (2014-08-04 06:16:52)

'man polkit' explains that 'allow_inactive' and 'allow_active' are for sessions on local consoles.
Only 'allow_any' applies to any client local or remote.
This seems confirmed by what you observe on your machine.

Organization plan active / inactive?

Similar Messages

Maybe you are looking for