Organization structure in CRM 7.0 from ECC and HR

Hi,
We are trying to download Org structures from ECC and HR. (CRM 7.0, HR & R/3 ECC 6.0)
From HR
The ALE distribution is set across the systems CRM and HR and I did the PFAL run as per the best practices BB C05. There are about 100,000 Idocs inbound to CRM system and out of which about 15K are in 51 status and the rest are in 53 status.
Observations:
The Organization structure from HR is not totally mapped in CRM but only a part of it is displayed in PPOMA_CRM.
The remaining Org units are found in 'non-related objects' selection.
All the Idocs in failure are in error "Error in subroutine read_namtb for structure of infotype ". When I go to the long text
Message no. 5-109
Diagnosis
An error has occurred in subroutine read_namtb for structure of infotype .
Procedure
Check the entry for infotype in table T777D (structure, IDoc segment, expanded structure) and the corresponding structures.
I am not sure which infotype needs to be checked in T777D.
From ECC
The CRM - ECC connectivity is set. Downloaded all the required customizing objects successfully. Switched the org model to "enhanced backend integration version " and then followed on to SPRO->CRM->Master Data->Organizational Management->Data transfer->Copy SAP ECC structure and selected all the available R/3 Organization assignments available and then selected the "generate selected lines".
Observations:
All the generated org units are in GREEN in SPRO but there are no assignments found in PPOMA_CRM not even in the unrelated objects
Checked tables HRP1000 and HRP1001 from the CRM Sales org unit IDs (ex: O 5000012) created here and they are not found but the generation is in GREEN.
I will appreciate any assistance I get here.
<< Moderator message - Everyone's problem is important >>
Regards,
DT
Edited by: Rob Burbank on Oct 20, 2010 4:25 PM

Hello DT,
Could you please let me know the process how the problem is solved..
even we are having the same issue like, we have downloaded the Org Model form HR to CRM system, till here it was fine.
when we are trying to download the ECC sales structure(CRMC_R3_ORG_GENERATE) to CRM system, i have selected all the items and triggered the Gerenerated Selectd Lines, but after all the items are generating in a error with RED.
Could you please share you knowledge, so that it will help me in figuring out the issue.
Thanks in Advance DT. Hope you reply back.
Regards,
Ven

Similar Messages

Call RFC from ECC and display the values in AET

Hi ALL,
I had an RFC in ECC ( Z_CRM_SPEC_DATA) this should be called into my AET Fields in getter method.
In getter method of tat AET field what code should i write?
Plz help me on this.

HI,
1) Call the RFC(Z_CRM_SPEC_DATA) from ECC and display the values as mentioned in below AET fields.
AET FIELDS :    zzfld00000M    zzfld00000N
Description :    Budget Quan    Forecast Quan
values         :    (--5.0)(6.0--
2) (Fetch Budget and Forecast data from ECC ),you would need to pass Material Number(MATNR) as well as Ship to party info to fetch the budget and forecast data as one material may be assigned to 2 or more SH with specific budget and forecast data for each.
Edited by: venkatabharathv on May 23, 2011 2:44 PM
Edited by: venkatabharathv on May 23, 2011 2:49 PM

Ship-to,Payer, Bill-to roles not maintained in CRM after load from ECC

Hi Experts,
We are currently loading in Sold-tos from SAP ECC to CRM2007. I have loaded across an account which is a sold-to, ship-to. Payer and Bill-to.
However when I look at the account in transaction BP in the "Display in BP Role" dropdown field the account is only maintianed as a Sold-to in CRM. Does sometihng have to be activated in CRM to enable the additonal roles to be pulled across and maintained in this area?
I have also loaded across a sold-to with multiple ship-tos. When the relationship button for the ship-to accounts are viewed in transaction BP in CRM it shows that the ship tos are related to the sold to.
However, in the General Data "Display in BP Role" dropdown the ship-tos are only maintained as sold-tos?? I would expect that the ship to account should be maintained for both the Sold-to and Ship-to role.
Is there a setting missing in CRM that i need to activate so that bill-to, payer, ship-to is pulled from SAP ECC and becomes maintained in CRM after the object load?
Any assistance would be appreciated.
Thanks,
Jonathan

Hi Jonathan,
what you see is standard behavior.
The account group in ECC is mapped to the role in CRM.
So account group 0001 in R/3 is mapped to role "sold-to party" in CRM.
This can be influenced in trx. PIDE.
A role should not be confused with a partner function. The role "sold-to party" will contain the 3 partner functions ship-to, bill-to and payer.
So in your case, nothing additional should be customized. If you enter a transaction (e.g. sales order), and enter the sold-to party, you'll see that the other 3 will be determined.
regards,
Wim Olieman

Fetch field values in GTS system from ECC and missing field values

Hi,
I am developing Adobe Form "Certificate of Origin" in GTS (Global Trade Services) system. I require to get Customer PO and Country of Origin from ECC system for each line of Invoice (VBKD-BSTKD and EIPO-HERKL respectively). Pls let me know, how can I get these values from ECC to my Adobe Form?
Also for the "Commercial Invoice" form, value of below fields are not coming in GTS. Pls tell me, if there is any another way I can get data for these fields ?
1. Tax Number
2. Tracking Number
3. Estimated Export Date
4. Payment terms
5. Carrier
6. Package count
7. Net wt and Gross wt.
Thanks !!!

Hi Sri,
you must align SD0C level.
Go to SPRO --> SAP Global Trade Services --> SAP Customs Management --> Document Structure --> Assignment of Item Categories from Feeder Systems --> Assign Item Category at Feeder System Group Level
For Example: SD0C TAN CLPOS Standart Item
When you are done, just re-execute LUW in SM58.
Regards,
Gabriel.

Mapping table for contact person download from ECC and Groupware

There are 3 connected system in our landscape:
- CRM
- Groupware (connected to CRM)
- ECC
We have a requirement that the Contact Person can be created in any of the above 3 system and should flow to the other. So, the below scenarios are valid in our case:
1. Contact created in Groupware, flows to CRM ->ECC
2. Contact created in ECC flows to CRM-> Groupware
3. Contact created in CRM flows to Groupware and ECC
Our flow system works fine and the contacts created in one system, flows to the other 3 and any changes also flow.
The problem is that for the contacts created in ECC, the communication data (phone, email etc) flow in CRM and get updated in the "Work Address" section in the Contact display screen in Web UI and the updates from Groupware for communication data gets updated in "Main Address" section.
Can anyone please advise what are the mapping tables for the address update when the contact is created in :
- Groupware/CRM
- ECC
Regards

Hi Christophe,
Thanks for the response.
I checked for the notes you suggested, but having read it it doesnt appear to address my problem. Did you get this from SAP as fix to solve' specify the name of contact person' error in SMW01 ? Unfortunately even SAP isnt replying to me on this.
I am also not getting any dump, all my queues are getting cleared in ECC and CRM. My error remains 'specify the name of contact person'. Interestingly when i tried to push the contact person directly as bupa_main..it too failed with the same error..more interestingly whenver my contact person tried to get replicated as bupa_rel..ecc does eat up a number assignment..but no record is created for it in ecc...the smw01 says partiaslly send ..receivers has error..
Edited by: Hamed Kazi on Apr 19, 2011 2:33 AM

CRM order details from database and buffer

Hi,
I am working on a scenario where i need to read the order details from buffer and database also to compare the changed values in one of the action class. I have tried with CRM_ORDER_READ and CRM_ORDER_READ_OW. CRM_ORDER_READ is giving the details from buffer and CRM_ORDER_READ_OW is not giving me any resluts. To compare the old and new values i need to read the details from buffer and database also. Please suggest me the function modules to use.
Thanks,
Rajinikanth G

I'm using similap comparion for some opportunity fields. There I'm using function modules 'CRM_OPPORT_H_READ_DB' and 'CRM_OPPORT_H_READ_OW and it's working fine.
So I guess _DB and OW function modules should be ok. I'm not sure, but I think I also had problems a while ago with using module CRMORDER_READ_OW. Maybe try to find some other OW function that could give you wanted values. CRMORDER_READ_OW is very large fm, so try using CRM_ORDERADM_H_READ_OW for header data and CRM_SCHEDLIN_I_READ_OW for items and so on. There are function modules for nearly all data groups.
Regards.

How to debug proxies in CRM when called from ECC system

Hi,
My requirement is When a Post Goods Issue happens in ECC, the iobject is created in CRM system.
The proxy is called in the ECC system. The implementation of the proxy is done in the CRM system.
I am able to debug and see that the values are passed correctly to the proxy.
In CRM system, the iobject is not created. So, i wanted to debug the implementation which is available in the CRM system.
How can i debug in CRM system while the Post Goods Issue is done in the ECC system.
Thanks in advance.
Regards
Shanthi

hi , if you want to debug through ERP to CRM , you need to set a external breakpoint in CRM
And to set the external breakpoint, you need to login CRM system by the middleware user, not a normal user.
To check the middleware user name, you can search the view CRMRFCPAR in sm30 ERP, find out the RFC destination to CRM, then check the user used in the RFC destination in SM59

Transport of CRM Organizational Structure

- Hello Experts,
    Hope you guys can support me on this issue,
    Need to transport the Organizational Structure of CRM from Dev. system to QAS and then to Prd.(considering we're now on CRM version 4.0 SP09).
    If anyone could send a manual or information on this procedure, that would be great...Thanks in advance,
     Daniel

Hi Daniel,
It is not suggested to transport the organizational structure from one CRM system to the other CRM system in the same land scape.
For e.g. you have connected R/3 dev system to CRM dev system and the sales organizational strucutre is downloaded from R/3 to CRM.
You have to follow the similar approach between the R/3 QAS and CRM QAS and as well between R/3 PRD vs CRM PRD.
This is the only suggested approach that keeps all the systems in sync.
Off course, if you have maintained org structure manually in CRM dev then you can think of migrating it to your QAS system.
Regards,
Paul Kondaveeti

Replication of Quotations from ECC to CRM

Hello Experts,
The scenario is as follows:
I am required to replicate all the quotations from ECC to CRM.
My question is: what are the various middleware settings to be done?
I have created a transaction type for quotation by the same name in ECC and CRM so far.
It would be great if I can get help on the following:
1. What are the item categories that I need to maintain on both ECC and CRM side for Quotation?
2.What action profile do I need to maintain on ECC and CRM side for quotation?
3.How should the number ranges be defined on ECC and CRM side for quotation?
4. Do I need to do a Cross-Copy Control of quotation from ECC and CRM at the transaction and item category level?
5. Do I need to assign the Quotation Type (ECC) to ERP Profile on CRM side?
6.Can the transfer of quotations from ECC to CRM happen only after replicating the product and customer data from ECC to CRM?
What more needs to be done?
Once the settings are complete and fool-proof, I know I can run an Initial Load (R3AS) on the object: SALESDOCUMENT from R/3 to CRM.
What are the filter settings to be maintained in SalesDocument Object?
Experts, this is my requirement and all the pointers would be greatly helpful.
Many thanks,
VSK.
Edited by: venkatskumar on Feb 16, 2011 12:17 AM

Hello
Please find below my reply :-
1. What are the item categories that I need to maintain on both ECC and CRM side for Quotation?
>> You can make a Z copy of the standard Quotation Item categories in ECC and CRM.
2.What action profile do I need to maintain on ECC and CRM side for quotation?
>> Action profile settings are specific to your business scenario. You need to define ACTION Profile in ECC. In CRM you can have an ACTION PROFILE and assign it to the CRM Transaction Type
3.How should the number ranges be defined on ECC and CRM side for quotation?
>> If ECC is a leading system for quotation creation, the number range will be EXTERNAL in CRM and assign this EXTERNAL number range for CRM Quotation Transaction Type
4. Do I need to do a Cross-Copy Control of quotation from ECC and CRM at the transaction and item category level?
>> Yes
5. Do I need to assign the Quotation Type (ECC) to ERP Profile on CRM side?
>> Not sure on this. Requesting other experts to answer this.
6.Can the transfer of quotations from ECC to CRM happen only after replicating the product and customer data from ECC to CRM?
>> Yes. The master data such as Material, Customer, Pricing should be downloaded to CRM, if the quotation needs to be replicated to CRM.
Hope this will be helpful.
Regards

How to call and reuse smartforms from ECC to CRM?

Hi Experts,
I would like to seek help from all of you, I would like to know if it is possible to call and reuse smartforms created in ECC to CRM environment. The requirement is to create smartforms in ECC (R/3 system) and reuse and call it in CRM environment whenever the 'PREVIEW OUTPUT' button is ticked in CRM webclient. This is to reduce the creation of smartforms from both systems.
Hope to hear from all of you. Your help will be very much appreciated.
Thanks and Regards,
Monica

You can not reuse it directly but I guess you can download form from ECC and then upload it to CRM. I guess based on your requirement you might end up with few changes to form in CRM to display correct data.
http://help.sap.com/saphelp_nw70/helpdata/en/c9/452f2d33ca11d5b697006094192fe3/content.htm
http://www.howforge.com/how-to-upload-smartforms-from-pc
Smartform Download/Upload problem
Regards,
BJ

Organization download into CRM

Hi,
We are downloading org structures from ECC to CRM. But we have multiple org structures in ECC system(like sales, HR, Work flow). But only few are relevant for CRM system and we need to download only specific org structures into CRM. I am downloading this using PFAL. But when I schedule the change pointers job, it is brining all the org structures into CRM system which are not relevant for CRM. I would like to restrict only specific org structure changes from ECC to CRM system.
Could you please advise how to set up this kind of filters, specific to one root organization and changes relevant for the org which was downloaded initially into CRM system.
Thanks&Regards,
Kumar Budidagaddapalli.

Hello Kumar,
For Downloading Organization structure use CRM Transaction code CRMC_R3_ORG_GENERATE.
You can manullay select here the required R/3 Sales Organization, Sales Office & Sales Group structure.
Then generate those selected structure from R/3 to CRM System.
You can use Transaction code PFAL in R/3 to download employees from R/3 to CRM.
You can select the required data by choosing in Object ID field.
Regards,
Rajendra Sonawane

Organizational structure in BW

Hi experts,
I am new and I need to load an organizational structure of CRM to BW. Can anyone say me what I must to do?
Regards,
Leo

Hi,
As per my understanding about your question , I would like say that :Use transaction code in CRM system and then do replcation of meta data to BW system .So it will copy the Organizational structure into BW from CRM.
With rgds,
Anil Kumar Sharma .P

Deletion of ORGANISATION STRUCTURE in CRM

Dear Friends,
I am working with CRM 5.0. Can anybody help in stating that from where ORGANISATION STRUCTURE in CRM can be deleted.On deleting the assignment by right click to org unit only assignments gets deleted the entry remains in table.
With regards,
SACHIN

hi,
I have a query regarding the ORG structure.
Can a sales & marketing organization be created in same organization structure in CRM 5.0.
My requirement is to create a Sales & marketing Department in a company say 'SK Co.'
Once these are defined then the respective sales hierarchy can be created like for 'sales' ; Sales organization, Sales office , Sales group.
Thanks In advance.

TIME MANAGEMENT AND ORGANIZATIONAL STRUCTURE

Good afternoon,
We are going to customize the Time Management (PT) and the Organizational structure (OM) modules in SAP version ECC 6. At the moment we have installed an configured a lot of SAP modules: Personal Administration (PA), Payroll (PY), besides other modules not related directly with HR like PM, MM, IS-U, etc.
We need::
- To be able to define the organizational structure of the company with every work unit, inside every work unit locate the employees with their functions and positions, etc.
- To know the number of employees that are avalaible for a service requirement (PM module)
- To manage with SAP all the absences when the employees don't go to work.
We have had training of some official courses but I think that they are not enough to achieve the goal, I think we need some kind of guide.
Do you know if exists any consult SAP note or other kind of document where it's explained the steps or the good practices for the customization of these SAP modules (OM, PT).
Thanks in advance,
Julian Olmo

Hi,
SAP customers and partners can download SAP Best Practices from the SAP Software Distribution Center on the SAP Service Marketplace (http://service.sap.com/swdc) or order via their contracts department. SAP Best Practices are provided free of charge.
For downloading SAP Best Practices, customers and partners require a valid S-User ID. For more information about obtaining an S-User ID, see SAP Note 1037574
You can check whether PT and OM best practice materials are available for your industry type and download.
Regards
Chandrashekar

Organization structure R/3 sales office and group assignment

Hi,
I have a general question about the organizational structure in CRM.
When I try to assign an organization unit in the structure to the R/3 sales offices and sales groups in Function tab, the system is asking for a R/3 sales area together with sales office and group.
In our case a user can create sales orders for different sales areas. In other words the sales office and group is assigned to more than one sales area in SD customizing.
The problem is that if I assign any employees to an organization which is a sales group and which is assigned to a R/3 sales area + sales office + sales group, in this case the replicated document in SD can only be from one sales area, which is not applicable in our case.
How can we proceed? Any ideas?
Thanks

has now been resolved

Organization structure in CRM 7.0 from ECC and HR

Similar Messages

Maybe you are looking for