Organizing data from low to high?

Hi Community,
I'm totally out of numbers and such, but I need to organize some data from low values to high values automatically, like for example, the earnings in 12 months, which are always variables but I would like to organize them from the lower to the higher. Is there a way to organize this automatically?
Thanks in advance,
Mart

Mart,
Would sorting your rows by column content do it for you?
Jerry

Similar Messages

Cumulative SUM based on Measure FROM LOWER to HIGHER

Hello,
I tried to find some post like mine but i did not find it.
I have this scenario:
Filter
Cod Store
Value
Cenario 1
City: RJ
1112
574924.05
Type: Infantil
1449
617860.04
Store: Carrefour
1023
873678.53
But i need to create a new calculated member based on VALUE from LOWER to HIGH making a cumulative sum like this:
Filter
Cod Store
Value
What i NEED
Cenario 1
City: RJ
1112
574924.05
574924.05
Type: Infantil
1449
617860.04
1192784.09
Store: Carrefour
1023
873678.53
2066462.62
Here it is ordered by VALUE already, but in my cube is may not be. Can someone help me? i trying many ways but no one works fine.
Fabrizzio A. Caputo Certificações: MCT MCC Oracle OCA 11g MCITP SQL Server 2008 BI MCITP SQL Server 2008 Implementation and Maintenance MCITP SQL Server
2008 Developer ITIL V3 Foundation Blog Pessoal: <a href="http://fabrizziocaputo.wordpress.com">www.fabrizziocaputo.wordpress.com</a> Email: [email protected]

Hi Fabrizzio,
Most of the running total snippets you will find in the forums contains elements like currentmember, prevmember or ranges [A : B] that also refers to members. Unfortunately the relative position of those elements are extracted from the hierarchy
level of the correspondent members as defined in the cube dimensions and not from the ordered (query scope) set.
The usual solution is to define a measure as the rank in the ordered set and take the cumulative sum with head (): sum( head( ordered set, till the rank) , by the value measure ).
If you choose the recursive solution for the running total you could use item() in combination with rank: maybe something like orderedset.item(rank measure) as an ersatz of currentmember.
Philip,

Rollup of Scores: From lower to higher context

Hi Everyone,
Would it be possible that for each scores on the balance scorecard be rolled up according to the hierarchy of the context? So that on the top most hierarchy of the Context we will have an overview across context which perspective is behind...
Thank you in advance.
Rally

Rally,
With multi-dimensional modeling you can build a dimension based on your contexts and use that when dimensioning data. While in BW a key figure is neccessarily dimensioned by every characteristic in the dimension tables, in PAS, every measure can be dimensioned differently. For example, Sales can be dimensioned by Customer, Customer Group, and Product, while Costs can be dimensioned by just Customer Group and Product. So you have the flexibility of just choosing those measures (or key figures) you would like also dimensioned by Context.
Regards,
Bob

Rman backup from lower and higher versions

Hi all,
we have three database one db in 8.1.0.6.0 and another 9.2.0.8.0 and another 10.2 database. Can i backup using 9i rman to lower version 8i and 10G using same catalog created in 9i ?

Please check about compatible
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/compat002.htm

Why does my macbook pro LED backlight keep going from low to high on it's own?

So this has happened to me I think once or twice before.. I'll be using my macbook and all of a sudden it's LED backlight goes dim. Then I have to change it back so it's in the middle (not too dim, not too bright). Then a couple minutes/seconds later the LED backlight goes to it's brightest.. It's making me mad that it's doing this and I don't know why it's doing what it does. All of this is happening while I'm scrolling down a webpage, typing, or just physically doing something on the keyboards. So it's not because it's about to go to sleep. I always keep the LED backlighting in the middle so it doesn't waste too much battery. So why is it doing this? Help me please?

There is an ambient light sensor built in the the MBP. If it is annoying , open SYSTEM PREFERENCES>DISPLAYS>DISPLAY. Uncheck the box for 'Automatically adjust brightness as ambient light changes'.
Ciao.

Change photo from low to high resolution

Can Photoshop take a 72 dpi photo and turn it into a 300 dpi phot?

Yes, but depends on your expectations? DPI is just dots per inch for a printer command. It does nothing to the base resolution. One can not manufactor more resolution that it was shot at.

Logic unable to handle midi controller data from my alesis andromeda

I'm having problems recording knob movement (filter sweeps, lfo rate
movement) into logic from my alesis andromeda. When logic is in record mode
and I'm moving the filter from low to high very slowly, the data comes out
all jumpy, with the midi in/out meter jumping all over the place.
I found out that because the filters and knobs on the alesis andromeda are
analog, it sends out NRPN data and not regular midi CC's. The NRPN data is
in much larger increments than regular 0-127 midi data. I'm not sure why
but logic was never made to handle this data directly. I've been told that
there is a solution for filtering this NRPN data into data that logic can
read/write/automate, but i'm unsure how.
If anyone has any insight, it would be great appreciated.
My setup is as follows:
G5 Dual 2ghz
Logic Pro 7.2.2
Emagic Unitor 8 midi interface
Alesis Andromeda Synth
-Adam K

brennon wrote:
First, this data is recorded into a new MIDI region. Is there a way to record this directly into the existing region? If not, is there a way to copy the data from the new region into the existing region? If so, is there a way to copy ONLY the data from these selected MIDI parameters into the new region. For instance, say I've got my first region with everything but modulation data set, and I then record the modulation data into a new region. Can I only copy this modulation data into the existing region without blowing everything else away?
*Either merge the regions by using the "glue" tool if you want to integrate all the controller data
*To select only certain controller from an event list click on one event e.g. Modulation and then use "select similar" (my KC for this is shift+S) - all modulation data is selected and can be copied/pasted into another Midi region
*You can also write data into existing regions using the Hyper Editor

Select-options split date into month and assign to low and high

Hi,
 In my select-options i am giving BEDAT (01.04.2004 TO 30.10.2005).I need to split month and
year in separate fields.that is
select-option_low-month in one field
select-option_high-month in second field
select-option_low-year in third field
select-option_high-year in fourth field.
Finally i need to move these four fields to it_final.
select * from mbewh into corresponding fields of table it_mbewh
 for all entries in it_final where matnr = it_final-matnr and
 bwkey = it_final-werks and lpmon = ? and lfgja = ?
 and bklas <> ' '.
what input i have to give in lpmon and lfgja in select query to get for lfmon (04 to 10)
and lfgja (2004 to 2005).
suggest some ideas.

Hi ,
Can you please check the following code.
Hi ,
data : l_low_yr(4),
 l_high_yr(4),
 l_low_mon(2),
 l_high_mon(2).
Splitting the select option date to month and year into low and higher values
l_low_yr = s_date-low+00(04). " Year low value from the date range
l_low_mon = s_date-low+04(02). " Month low value from the date range
l_high_yr = s_date-high+00(04)." Year high value from the date range
l_high_mon = s_date-high+04(02)." Month high value from the date range
selecting the data from the table mbewh based on some conditions.
select * from mbewh into corresponding fields of table it_mbewh
 for all entries in it_final where matnr = it_final-matnr and
 bwkey = it_final-werks and lfmon BETWEEN l_low_mon and l_high_mon
and lfgja BETWEEN l_low_yr and l_high_yr and bklas EQ ' '.
This select will retrive the desired data records from the table MBEWH.
Please let me know if this works according to your requirement.
Thanks and Regards
Saritha

Can I summarize data from a line item ODS into a higher summary level?

Hello friends,
1) Can I summarize data from a line item ODS into a high summary level and store the results into another ODS? If so, can you discuss the approach at a high level...i.e. whether or not a start up routine is needed?
2) Once data is stored in an ODS, can a routine be written to update specific fields in the ODS after the data has already been loaded into the ODS. As a simple example, is it possible to write a routine that simply multiplies "Field A" by "Field B" and stores the result in the ODS as "Field C"? (Most of the time I would do this calculation in Bex, but in this one case, I have the need to calculate and store "Field C" in the ODS.)
Thank you.

1.- Yes, you can sumarize data in other ODS. Connect both ODS and use aditions for key figures intead of overwriting.
2.- You can do it in load time, in update rules, is not necesary to wait for ODS was loaded

Acquiring High resolution data from usb mouse movement

Is there a way of acquiring high resolution data from the movement of a usb mouse? I have a NI PCI 6221 daq card to use. I have a Pentium 4 PC with 1 Gb of RAM. I need to get the position, velocity and acceleration of the mouse.
Is there a way to do it with the above hardware.
Thanks in advance

I don't see how you could use a PCI-6221 to get high resolution mouse movement measurements. The PCI-6221 can acquire voltages at up to 250kS/s, but what voltage would you measure? It could also read in digital data at 1MHz, but you would have to be able to understand the USB communication protocol your mouse uses, and I doubt that your mouse vendor will give out that information. You might be able to take your mouse apart and hook up leads to the sensors around the trackball and do a sort of quadrature encoder application, but there's no guarantee we're dealing with TTL digital signals here (you might even be using an optical mouse!).
Your best option - and I have no idea how good this option is - is to use the driver already installed for your usb mouse. What software application are you going to use to program your application that will measure the mouse movements?
If you would consider using LabVIEW, you could set up an event structure to capture mouse movements across the front panel. Each event registered includes a timestamp from the CPU's millisecond clock as well as the coordinates of the mouse. If you stored up a buffer of previous mouse positions and times, you could infer a velocity, perhaps with the help of interpolation functions.
All of this would have somewhere on the level of millisecond timing accuracy. Were you envisioning something else?
Jarrod S.
National Instruments

Select data from database tables with high performance

hi all,
how to select data from different database tables with high performance.
im using for all entries instead of inner joins, even though burden on data base tables is going very high ( 90 % in se30)
hw to increase the performance.
kindly, reply.
thnks

Also Check you are not using open sql much like distict order by group by , use abap techniques on internal table to acive the same.
also Dont use select endselect.
if possible use up to n rows claus....
taht will limit the data base hits.
also dont run select in siode any loops.
i guess these are some of the trics oyu can use to avoid frequent DATA BASE HITS AND ABVOID THE DATA BASE LAOD.

In VB how do I pass my low and high limit results from a TestStand Step into the ResultList and how do I retrieve them from the same?

I am retrieving high and low limits from step results in VB code that looks something like this:
' (This occurs while processing a UIMsg_Trace event)
Set step = context.Sequence.GetStep(previousStepIndex, context.StepGroup)
'(etc.)
' Get step limits for results
Set oStepProperty = step.AsPropertyObject
If oStepProperty.Exists("limits", 0&) Then
dblLimitHigh = step.limits.high
dblLimitLow = step.limits.low
'(etc.)
So far, so good. I can see these results in
VB debug mode.
Immediately after this is where I try to put the limits into the results list:
'Add Limits to results
call mCurrentExecution.AddExtraResult("Step.Limits.High", "UpperLimit")
call mCurrentExecution.AddExtraResult("Step.Limits.Low", "LowerLimit")
(No apparent errors here while executing)
But in another section of code when I try to extract the limits, I get some of the results, but I do not get any limits results.
That section of code occurs while processing a UIMsg_EndExecution event and looks something like this:
(misc declarations)
'Get the size of the ResultList array
Call oResultList.GetDimensions("", 0, sDummy, sDummy, iElements, eType)
'Step through the ResultList array
For iItem = 0 To iElements - 1
Dim oResult As PropertyObject
Set oResult = oResultList.GetPropertyObject("[" & CStr(iItem) & "]", 0)
sMsg = "StepName = " & oResult.GetValString("TS.StepName", 0) & _
", Status = " & oResult.GetValString("Status", 0)
If oResult.Exists("limits", 0&) Then
Debug.Print "HighLimit: " & CStr(oResult.GetValNumber("Step.Limits.High", 0))
Debug.Print "LowLimit: " & CStr(oResult.GetValNumber("Step.Limits.Low", 0))
End If
'(handle the results)
Next iItem
I can get the step name, I can get the status, but I can't get the limits. The "if" statement above which checks for "limits" never becomes true, because, apparently the limit results never made it to the results array.
So, my question again is how can I pass the low and high limit results to the results list, and how can I retrieve the same from the results list?
Thanks,
Griff

Griff,
Hmmmm...
I use this feature all the time and it works for me. The only real
difference between the code you posted and what I do is that I don't
retrieve a property object for each TestStand object, instead I pass the
entire sequence context (of the process model) then retrieve a property
object for the entire sequence context and use the full TestStand object
path to reference sub-properties. For example, to access a step's
ResultList property called "foo" I would use the path:
"Locals.ResultList[0].TS.SequenceCall.ResultList[].Foo"
My guess is the problem has something to do with the object from which
you're retrieving the property object and/or the path used to obtain
sub-properties from the object. You should be able to break-point in the
TestStand sequence editor immediately after the test step in question
executes, then see the extra results in the step's ResultList using the
context viewer.
For example, see the attached sequence file. The first step adds the extra
result "Step.Limits" as "Limits", the second step is a Numeric Limit (which
will have the step property of "Limits") test and the third step pops up a
dialog if the Limits property is found in the Numeric Limit test's
ResultList. In the Sequence Editor, try executing with the first step
enalbled then again with the first step skipped and breakpoint on the third
step. Use the context viewer to observe where the Limits property is added.
That might help you narrow in on how to specify the property path to
retrieve the value.
If in your code, you see the extra results in the context viewer, then the
problem lies in how you're trying to retrieve the property. If the extra
results aren't there, then something is wrong in how you're specifying them,
most likely a problem with the AddExtraResult call itself.
One other thing to check... its hard to tell from the code you posted... but
make sure you're calling AddExtraResult on the correct execution object and
that you're calling AddExtraResult ~before~ executing the step you want the
result to show up for. Another programmer here made the mistake of assuming
he could call AddExtraResult ~after~ the step executed and TestStand would
"back fill" previously executed steps. Thats not the case. Also, another
mistake he made was expecting the extra results to appear for steps that did
not contain the original step properties. For example, a string comparison
step doesn't have a "Step.Limits.High" property, so if this property is
called out explicitly in AddExtraResult, then the extra result won't appear
in the string comparison's ResultList entry. Thats why you should simply
specify "Step.Limits" to AddExtraResul so the Limits container (whose
contents vary depending on the step type) will get copied to the ResultList
regardless of the step type.
I call AddExtraResult at the beginning of my process model, not in a UI
message handler, so there may be some gotcha from calling it that way. If
all else fails, try adding the AddExtraResult near the beginning of your
process model and see if the extra results appear in each step's ResultList.
Good luck,
Bob Rafuse
Etec Inc.
[Attachment DebugExtraResults.seq, see below]
Attachments:
DebugExtraResults.seq ‏20 KB

I have a Mac with 10.5.8 installed, trying to transfer data from it to new machine, can't do it.until i upgrade to higher system?

I have an older Imac with 10.5.8 installed, (I have been told this is the highest version this machine will accept) I just purchased a new Imac and am trying to transfer data from one the old one to the new one, Migration assistant says I can't do it until I install a higher operating system??????????. How do i transfer data if I can't upgrade???

You will need an external USB drive at least the same size as the one in your old computer.
Make a clone of your old computer's hard drive:
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the old computer's startup drive.
Connect the drive to your new computer. You can transfer what you want using Migration Assistant. Just select the option for migrating from an external drive.

How to get data from hard drive in dead iMac?

I have an old slot-loading iMac (350Mhz G3 blueberry) that just died, probably a dead power supply or something. Won't turn on at all. I don't care about restoring it, I just want to take the hard drive out and grab data from it. I've found instructions for removing the HD ... but any tips on the best/cheapest way to hook it up to get data from it? It's EIDE I believe from what I've read so far. Thanks for any help.

Hey Richard.....Thanks for the reply to my question about my wife's dead iMac.....
Her iMac had been acting up lately, mostly to do with her Outlook Express freezing up in OS9. I dunno if OS9 was freezing or if the application was failing. Regardless, I would have to quit OS9, restart Outlook which at the same time restarted OS9. All would be fine for a while, a day or two and then the scene would repeat itself. But I think that issue is separate from the iMac being "dead". Often we have power outages in the area, more than we should. I had the iMac plugged into a battery backup, some APS product I think it is. I believe it is only good for less than an hour as we have other devices drawing on it too. Most of our power outages are of short duration, just enough to be aggravating, sometimes having to reset clocks, etc...And a couple times, I would have to reset the time and date on the iMac so this told me that the PRAM battery was below minimum voltage. But the iMac would ALWAYS restart, even with the low battery. But the most recent outage, about one hour duration, did in the iMac, somehow or other. I do believe the battery backup basically fully discharged. So I removed the battery, could not find a new battery locally so I drove to the big city and paid the local Apple service dealer a visit. I got ripped big time price wise, embarrassed to say. So I get home, put the battery in the holder, depressed the CMU reset, the powerbutton illuminated as did a green LED by the memory modules for less than three seconds and then quit. I also heard the HD trying to spin up and a high voltage THUMP which I assume is the CRT trying to ignite. If I unplugged the iMac, removed the battery, plug in the power again and hit the power button, the iMac would repeat the same short on period and then quit. So it did not seem to make any difference if there was a battery in place. I read somewhere to pull the battery, pull the AC cord, hold down the power button to dump any current (?) and let the unit sit for 24hrs. After that length of time, I was supposed to replace the battery, depress the CMU reset, wait ten seconds and then feed it AC. Well, when I pressed the power button, I heard life for maybe five seconds, maybe a second longer, then a beep and then it shut down. I pulled the AC cord, pulled the battery, re-inserted the battery, depressed the CMU reset, waited a few seconds, plugged in the AC cord, depressed the power button and I am back at the under three seconds of "power-up" and then nothing, dead, no beep, nothing. I think maybe it is a waste of time trying to mess with this unit, looking for a newer iMac on eBay, the snowball series with the 17" LCD, might be time better spent. Hate throwing stuff away, that's why I am up to my ears in junk, maybe u know that scenario. The wife likes my 19" ACER LCD screen, hooked up to this old dual 800mhz, though she dislikes the noise and the tower. But we both agree the large LCD screen is much easier on our aging eyes than the old iMac CRT. Anyway, I appreciate your help, always GREAT to correspond with an Apple fan.....John Bauer

Itunes was unable to load provider data from sync services. Reconnect or try later

Hi everyone
This issue has got me stumped.
I have a Dell Vostro desktop computer with Windows 7 SP1 64 bit edition.
I used to be able to sync now I cannot bakup or sync.
The device is an iphone 4s with the latest software IOS 5.1.
Itunes is version 10.6.0.40, the latest.
To try to fix this problem I removed itunes/quick time completely. Removed Bonjour, Apple Application Support, Apple Mobile Device Support, Apple Software Update,
Deleted the itunes and quick time folders, the common file folders and files, deleted anything related to able under appdata local and roaming, removed apple folder under program data, scanned through registry and removed all apple entries.
Then I rebooted the computer, re-installed itunes/quicktime and have the same error appear again.
I have gone through this process at least 5 times , but still keep getting the same error, cannot go past it.
I found a solution on this forum but it only applies to MACOS, could not find anything suitable for windows 7 environment.
Also searche the web high and low and tried several different advice from people.
This has to be a bug with Itunes! I would like to hear from Apple developers and programmers why I have to suffer so much to sync my device.
As a last resort I am planning to rebuild windows 7 from scratch but is is a big job.
Tried also to disable firewall, antivirus, check the apple windows services are running, nothing works to get me past this error.
Please help someone!
Thanks and regards
Alfred

Did you have a look ath this (rather) long thread about it?
https://discussions.apple.com/message/17214161#17214161 , for example:
danielfromkongsvinger
Re: Unable to load provider data from Sync Services
16.12.2011 20:21 (in response to wisniak)
"I then followed a tip found in PCWorld and performed the following:
1. Make sure iTunes isn't running.
2. Click Start, type regedit, then press Enter.
3. Navigate to this Registry location: HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\Layers
4. Look in the main pane for a key that refers to iTunes. If you find one, delete it, then exit the Registry.
5. Start iTunes. The offending message should be gone!"
This actually worked for me! I have struggeled with this error for years, and now it's gone. Thanks!

Organizing data from low to high?

Similar Messages

Maybe you are looking for