Organizing quality and assurance testing

I am looking for best practices for organizing quality and assurance testing made by business users of changes made in SAP. Hope there is links, documents, presentations which could contain useful information.
I will be grateful to you for any information.
With Regards
Edward

Interesting thought, i completely agree with your perspective
[color=#E5E6E8]comparatif simulation taux pret auto [/color][color=#E5E6E8] - taux pret auto differe selon la prise en compte ... calculent automatiquement le taux pour un prêt automobile donne.[/color][color=#E5E6E8]comparatif simulation taux pret auto[/color]

Similar Messages

Suggestion for new Forum - Software Quality Assurance & Testing

Hi - I'm active in ASUG and a SIG Chair for Software Quality Assurance SIG. I'm new to SDN and looked around a bit for where topics related to Software QA, Testing, Test tools & methodologies, etc. would be posted and discussed. I haven't found any relevant forums. A couple postings on SAP TAO (test tool) landed in the Solution Manager forum... looks like they were searching for a relevant home too.
We have good content and discussions on these topics on asug.com and I'd like to facilitate bringing some of these topics to the larger SDN community. I started a blog, we sponsor webinars, etc. What would you think of having a forum on SDN called Software Quality Assurance & Testing? Or are there other suggestions for where I would start discussing this? Maybe the forum's out there already but I just can't find it?
Thanks!

Count me in!
Currently the security aspects of good software development don't have a real home either, and are distributed over SCN in a rather thin and adhoc fasion by a few folks.
I am sure that such a forum would attract a lot of new attention to SCN on the customer side, as it is important for them.
It would also be irrefutable that the SCN Rules of Engagement are applied strictly to such a forum
Cheers and good idea!
Julius

Please, I am in a very big problem I designed the project by Adobe director And you test the software on the computers on Windows and works with high quality When I tested the project on Apple Macintosh operating system, Li appeared a number of problems

Please, I am in a very big problem
I designed the project by Adobe director
And you test the software on the computers on Windows and works with high quality
When I tested the project on Apple Macintosh operating system, Li appeared a number of problems and you dissolve a large part of them
But I have a problem too big
The project works on some devices and others show me messages mistakes and why chasm different operating system version
Apple's Macintosh and these messages
"biosegnatures" can't be opened becouse it 's from undefined developer "
others
shokwave player error
pleas what can i do

Welcome to the Support Communities.
m.raslan wrote:
I tested the project on Apple Macintosh operating system
Click on the  menu at top left of your screen, choose About This Mac and, in the panel that appears, note the Version no. in the form 10.n.n. Then update your product list so we can see what version of OS X you're running on the Mac — see this tutorial:
Update your product list
m.raslan wrote:
"biosegnatures" can't be opened becouse it 's from undefined developer "
This Apple doc may help:
OS X: About Gatekeeper
m.raslan wrote:
shokwave player error
Is Shockwave Player installed?...
http://www.adobe.com/shockwave/welcome/
...If not, get it here:
http://get.adobe.com/shockwave/

BT Speedtester - What is a 'WCC Assured Test'???

Hi,
I've just ran a BTSpeedtester test and after getting the results, I had the option to run a 'WCC Assured Test'. I thought why not so I ran the test and got the following message:
WCC Assured test InConclusive.
Your WCC service was found to be performing poorly. Please raise a fault with your service provider, stating that the BT Performance Tester tool indicates poor service throughput performance.
Can somebody please explain what this is and whether this inconclusive message should be anything to worry about?
Many thanks.
You won't get to ride the racehorse...until you've ridden the mule.... - RogerB 13/04/2010
Solved!
Go to Solution.

"WCC Assured
‘WCC Assured,’ is a premium service which ISPs can opt into as an addition to the standard WCC product set. This allows content to be marked at a priority level above ‘Best Efforts’ traffic when it is delivered to the EU from the CDD, thus when there is contention between Best Efforts and WCC Assured traffic then WCC Assured packets will be delivered first.
WCC Assured prioritisation offers increased Quality of Service (QoS) for the end user allowing the ISP and CSP to offer a premium media content experience
The ISP will be billed for bandwidth passed through as WCC Assured at a premium above that of the standard WCC service."
So something along the lines of priority data, nothing you should worry about too much I wouldn't have thought...
I also found this on WWC:
Content Connect is a product BT Wholesale is intending to develop to address the significant take-up in services over Broadband such as the BBC iPlayer.
The average bandwidth consumption of end users is increasing causing a significant rise in Communication Provider backhaul costs. Content Connect intends to address this issue by making the delivery of video over broadband more cost effective by deploying content storage closer to the end user. Content Connect will also enable Communication Provider’s to charge Content Providers for content delivery thus allowing the Communication Provider to be part of the value chain.
The product trial handbook and indicative roadmap are available in the download section on the right.

Configuration steps for Quality and Batch Management.

Hi Friends,
We are implementing QM along with Batch Management for testing the material like purity,pathology tests.
I am new to Quality and Batch Management.
Could any one guide me, how to configure material master for QM and Batch to test the material?.
Thanks

1) Maintain Material with Classification and Quality Management view
2) Tick the Check box Quality key Active in QM View->QM view->Inspection Set up and activate the inspection type for which the inspection lot.(e.g insp. type 01 - GR against PO)
3) Create Quality Info Record(QI01)
4) In PO the stock automatically goes to Quality stock.
5) Check MMBE stock
6) Do Result Recording and Usage Decision(QA32)
7) Check stock (MMBE).
There are few steps where the PP/QM Consultant need to help you in QI01,QA32 and in Creating characteristics and class according to Requirement(purity...etc).
Regards,
eswarmanu...
Edited by: eswarmanu on Oct 21, 2008 7:09 PM

Questions on preview quality and where Aperture uses them

I have been reading Apple's Aperture articles about preview quality and how Aperture shares images with the outside world. I had always assumed that the full quality image in Aperture was used for printing, exporting and sharing, but it seems that, at least for sharing, it is the preview that Aperture creates that is shared.
I have just increased the quality of the previews that Aperture generates from 5 to 9 and forced Aperture to re-render all previews. It seems to me that the images on screen and in slide shows and other iLife documents, are now much clearer and brighter (the downside of this is that my Aperture library file has grown by 4 gigabytes).
This leads me to ask four questions about Aperture and preview use (if I may?).
Is a jpeg on a high setting (9) visibly better than one on a medium setting (5), or am I being led to see what I expect to see?
Apart from editing, slideshows and iLife and iWork documents, in what situations does Aperture use previews where high or low quality might make a difference?
Does Aperture use previews to compile photo books? If so, does the quality of the preview affect the quality of the final printed book?
Is it possible to set Aperture to produce high quality previews for images above a certain star rating and low quality previews for the rest?
Thanks for any answers you may have.
Alasdair

Previews are used within Aperture to quickly show an image in the main viewer before the master has been fully loaded, they are also used to see the referenced masters even if the external location is not available at that moment (not adjustments can be done then, but at least you can see the image)
Previews are used outside Aperture to share the images with adjustments without exporting every image. It comes in handy that you can drag an image from Aperture's browser to another app or the desktop (what you get there is the preview). iMovie or other iApps use previews, the bigger size and quality the better quality you'll get.
Once you set up the size and quality of the previews in Aperture's Preferences the previews are created with those settings. I guess you could lower the settings, in the browser select the images you don't need big previews, ctrl+click and 'update preview' to force create low res previews for those. After that you can put the settings back. But if you do any change to those images the previews will be updated. Certainly I don't see the point of having different previews, do some test find the settings that work best for you and keep it like that.
Turn automatic previews off and create manually the previews you need, I have a smart album with images rated 3 or more stars and I use it to select and create previews manually to those images.

InDesign Transparency Effects - Problems with Image Quality and File Size

Hello,
We are experiencing new problems exporting InDesign files to PDF.
To summarize, though our largest workflow is to create files for offset printing, we also deliver our work to PDF for mounting on a website so our clients can download directly from the web. Our new problem is Transparency Effects, and creating a PDF that will both have a high quality (or resolution), and be a small file size.
We are working with multiple page documents (24 to 48 pages), and would very much like to work with InDesign Transparency Effects. However, after spending much time testing a variety of PDF types, we are finding there is a radical difference between quality and file size. I was curious if anyone has had these problems, and if there is a simple answer. InDesign is an incredible program that allows us to design on the fly with Transparency Effects, but, if we are going to experience these problems, we will have to eliminate these wonderful tools.
Can you help me or lead me to information online that will help.
Thank you,
Lain

Please don't post in multiple forums. Your question has nothing to do with the PDF language and specifications, but rather PDF workflow or InDesign. I've responded to your other posting and am closing this thread.
- Dov

Deploying BO universes and webi reports in quality and production

Hi
We are on BO XIR2 SP5 and reporting on SAP BI Infocubes and Queries.
We have 3 environments setup,each for development,quality and production.
During universe development,while creating a new connection we provide the IP address of application server,username ,password,system id,client number etc details.
The above details would defer for 3 different environments.In our case we have built around 50 universes.
So what would be the smart way of deploying these universes in each of the other 2 environments?Because changing universe connection details would mean re creating the universe classes and objects which would be a huge effort.Would the webi reports continue to work upon re creating the universe with new connection details?
Please suggest a best and smart practice for the above scenario.

Hi,
Using Import Wizard tool in BO you can migrate Universe and Reports from dev env to test.
Using the Import Wizard tool you can migrate the reports.
Steps are as follows:
Open Import window:
In Source environment , enter the details of dev environment.
Destination wizard you have to enter Test env credentials.
Then you have to select all the universe and the wid files from this wizard (The files you want to transfer ).
Finally finish this wizard by pressing finish button.........
Hope this will help you
Regards
Sindhu

Reduce image quality (and file size)

Is there a simple way to reduce the quality of all backgroung
images ? (there are all bitmap images, about 3 MB each of them)
I imagine that by reducing the image quality, the file size
will be less huge...
But I wasn't able to find a way to do that...
(the option about JPEG quality in project/preferences has no
effect, because all background images are bitmap... )
Any idea is welcome !
Valérie

Hi Valerie
I have been doing some research on this -- the issue of file
size (relating to both .cp and .swf) crops up a lot on this forum,
so I wanted to find out which were the critical factors relating to
images.
My findings show that there are two critical factors:
-- Slide Properties: Quality (High, Standard, JPEG,
Optimized)
-- Format of original image file (used for slide background
or inserted image object)
To summarize the results of my testing:
Slide Quality
Changing the slide quality from High
to Standard or JPEG makes little or no difference to the size of
the .cp file but can *significantly* reduce the size of the
.swf
This is an especially useful way of
dealing with the very large .swf file sizes caused by importing PPT
slides
A .swf consisting entirely of
imported PPT slides with complex backgrounds may be reduced to less
than 10% of its original size by changing the quality setting for
each of the slides to JPEG and using a JPEG image quality setting
of 75%.
Format of original image file
For complex images such as photos,
the best image file format to use is (oddly) .bmp -- although it
results in a larger .cp file than other file formats (such as .jpg
or .png), it generates the smallest .swf output.
The benefit of using the .bmp format
is less marked if you have set slide quality to Standard instead of
High, but it can still cut the file size of the .swf output by up
to 50%
For slides using a quality setting of
JPEG, there appears to be no difference in resulting .swf file size
between .bmp or any other image file format
A final comment: it is interesting to compare the size of the
.cp and resulting .swf for different Captivate projects. There is
typically an assumption that the .swf file will be smaller due to
compression. However, this is not always the case. For example, I
tested one project that used High slide quality and images that had
been inserted from .jpg files -- the generated .swf file was over 4
times larger than the .cp file. However, when I changed the quality
setting for all slides to JPEG, the .swf file reduced to less than
50% of the size of the .cp file.
I hope this information is helpful -- please contact me if
you'd like to see the detailed test data.
Best regards,
-Matthew Ellison

Transporting infosets from Development to quality and then to production

Hi,
I created a infoset in development under the Standard Area.
I want to move it to Quality and finally to production after the testing. When I created the infoset it never asked for any package and transport request.
How should I go about this ?
TIA
Rahul

when you are in transaction SQ02, click on the truck button (Transports)
you will get to the transport utility. This one allows to export/import infosets, usergroups and queries from a system to another.
select the type of objects you want to transport (you may need to do it once for usergroups and once for infoset + queries)
look at the Information button to know how it works

HT1583 When I render my project in IDVD, video and audio runs properly, but when I burn it in professional quality and burning is finished there was no audio on the last two chapters, one audio is attached to the clip and the other one is from itunes, pls

Hi, please help me When I render my project in IDVD, video and audio runs properly, but when I burn it in professional quality and burning is finished there was no audio on the last two chapters, one audio is attached to the clip and the other one is from itunes, pls help

Hi
My first two thoughts
• Shared to Media Browser - BUT as Large or HD - try Medium !
• audio from iTunes - use to go silent
- in iTunes
- Create a new PlayList with needed audio
- BURN this as a standard Audio-CD (.aiff) - NOT .mp3
- use the files on this CD in Your Movie project - I ALWAYS DO - and only use .aiff ever - never .mp3'
My notes on this:
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
Minuscular - - 176x144
Mobile - - - - - 480x360
Medium - - - - 640x480
Large - - - - - - 720x540 960x540
HD - - - - - - - - 1280x720
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies — except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

Purpose of UVT and integrations tests

Hello
Can you please explain me the purpose of User validation and integration tests?
In which system are these tests conducted?
Thanks

Hi,
These Tests are done in
1)User Tests-In Dev-Done by Developer
2)IntegrationTest - In Quality.-Done by Third Party or user.
The Purpose of it ..........
1)There is Gap in understanding of the User Requiement and what wehave developed.
2)For Ducumentation purpose so that if there is ny clarifiction in future we can always refer the UT/IT.
3)Security Reasons,impact
4)Authorization Reasons,impact.
5)To check the Quality of Data and the Amount of Validation done.
6)To Cross check all the Scenerios as per Requieement.
7)if any Programs are used ,the impact of the same.
Rgds
SVU

Unit testing and integration testing

hello 2 all,
what is the diff bet unit and integration testing? in sap what is unit teesting consists of and integration testing consists of what?
is this the work of test engineers r whose work is this?
take care
love ur parents

Hi Sameer,
Unit Testing
A unit test is a procedure used to validate that a particular module of source code is working properly from each modification to the next. The procedure is to write test cases for all functions and methods so that whenever a change causes a regression, it can be quickly identified and fixed. Ideally, each test case is
separate from the others; constructs such as mock objects can assist in separating unit tests. This type of testing is mostly done by the developers and not by end-users.
Integration testing
Integration testing can proceed in a number of different ways, which can be broadly characterized as top down or bottom up. In top down integration testing the high level control routines are tested first, possibly with the middle level control structures present only as stubs. Subprogram stubs were presented in Section 2 as incomplete subprograms which are only present to allow the higher level control routines to be tested. Thus a menu driven program may have the major menu options initially only present as stubs, which merely announce that they have been successfully called, in order to allow the high level menu driver to be tested.
Top down testing can proceed in a depth-first or a breadth-first manner. For depth-first integration each module is tested in increasing detail, replacing more and more levels of detail with actual code rather than stubs. Alternatively breadth-first would proceed by refining all the modules at the same level of control
throughout the application. In practice a combination of the two techniques would be used. At the initial stages all the modules might be only partly functional, possibly being implemented only to deal with non-erroneous data. These would be tested in breadth-first manner, but over a period of time each would be
replaced with successive refinements which were closer to the full functionality. This allows depth-first testing of a module to be performed simultaneously with breadth-first testing of all the modules.The other major category of integration testing is bottom up integration testing where an individual module is
tested from a test harness. Once a set of individual modules have been tested they are then combined into a collection of modules, known as builds, which are then tested by a second test harness. This process can continue until the build consists of the entire application.
In practice a combination of top-down and bottom-up testing would be used. In a large software project being developed by a number of sub-teams, or a smaller project where different modules were being built by individuals. The sub-teams or individuals would conduct bottom-up testing of the modules which they were
constructing before releasing them to an integration team which would assemble them together for top-down testing.
I think this will help.
Thanks ,
Saptarshi

Unit Testing and Integrating testing In HR

Dear Sap Gurus,
Would you be kind enough to give me an example of unit testing and integrating testing?? what do you test, eg..TC and what else.. what happened.??. And also an example of Integrating testing ..and an example ....I know what unit and integrating test is ..and with a good example, i will have a great idea about it ...thanks a lot.

Hi Pooja
Unit Testing:
A process for verifying that software, a system, or a system component performs its intended functions.
Unit transactions are tested against their own specifications and design documents.
Integration Testing
An orderly progression of testing in which software elements, hardware elements or both are combined and tested until the entire system has been integrated.
Integration tests deal mainly with the testing of cross-application process chains in addition to transactions and business processes. The process models and the test cases derived from these form the basis of these tests.
Regards
Vijay

Unit testing, integration and functional testing

Hello all,
I would like to know the difference between Unit testing, integration and functional testing. And also what are the testing tools that are more commonly used?
Thanks,
Maxx

Hi,
    Unit testing :
                A complete cycle of each module will be tested
                ie for PP Right from requirements to planned orders /production orders
                confirmation .
    Integration testing:
                Here cross module testing will be carried out.
                 ie PP and MM integration
                    After confirming production order a GR is made /billing is carried out
                    and delivered.
      Functional testing:
                This testing is carried out to see whether the system can with stand l the loads during processing by users.
                Stress test and volume test.
            Regards,
            nandha

Organizing quality and assurance testing

Similar Messages

Maybe you are looking for