OS X reports %74 keyboard battery for brand new fully charged batteries

I just placed three brand new fully charged 2450mAh Energizer batteries into my wireless keyboard and OS X reports that it is only %74 charged. Previously I had the same result with rechargeable Duracell batteries but using non-rechargeable batteries OS X reports %100 battery when using new batteries. Is this normal?

The reason just may be that rechargeable batteries no matter what kind (ni-cad, HMDS, or Lithium) are 1.2v batteries rather than 1.5v's like Alkaline batteries. That is why the keyboard and mouse instructions state that, "rechargeable batteries may be used." Which implies to me they are not the first choice of Apple. In all probability, the battery level is in fact calibrated for 1.5v batteries.
No matter, rechargeable's will work fine with more frequent replacement. A handy spare set solves the problem.
virg

Similar Messages

  • Battery for Brand New MacBook Pro 17"

    Hello,
    I just purchased a new MacBook Pro 17".
    What do I do with battery charing for the first use?
    Apple's official battery resource: http://www.apple.com/batteries/notebooks.html does not effectively answer the question.
    It writes "Be sure to fully charge your portable when you plug it in for the first time, and then run Software Update to ensure you have the latest software."
    The question then is, do I run down the battery completely the first time (but never plugging it in), and then when it goes to sleep, charge it all the way up to full?
    I basically want to know what to do for the first time - how long do I let the battery run down if at all?
    Thank you

    Here's the dirty little secret about lithium batteries: Heat & frequent full discharge/recharge cycles are the two biggest killers of these batteries. Fact is, lithium batteries really don't like to be discharged below 40% of capacity very often. I'm typing this on a 4 1/2 year old MacBook Pro, and my battery is still going strong. It's fine to leave it plugged in all the time, that's what I do. Once every two-three months, I discharge it to about 40% & then recharge. So, charge yours till full, and try to never fully discharge the battery.

  • New battery for MBP wont fully charge

    I have a new battery for my mid 2011 macbook pro 13". I installed it and since then i have had some problems.
    first i installed the battery, it came with 67%, i let the MBP go all the way to the red and shut itself off, thinking this was the best way to calibrate it.
    I plugged the mag safe charger in and let the computer charge
    come back to it the next day and its at 0%, click on the battery icon and it says battery isnt charging (clearly is)
    restart computer and it starts showing the charge, HOWEVER when i click on the battery icon it sill says not charging, but my light on charger is green, my battery icon has the charge look...
    I have seen other threads where they recommend a SMC, i done one and it made my monitor go from the wallpaper  to a white screen, i let it play out for 2 minutes before restarting it and it was normal....what does that mean?
    im in desperate need of some help and piece of mind i didn't just spend top $$$ on a bum battery, and FYI im 2 hours from a apple store so i try to do all my mac work myself, or with this assistance of youtube.
    Thanks

    It says replace now, but I just bought the battery yesterday.
    Battery Information:
      Charge Information:
      Charge Remaining (mAh):          942
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          4529
      Health Information:
      Cycle Count:          0
      Condition:          Replace Now
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          11188
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          60
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          20
      Automatic Restart on Power Loss:          No
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Wake on LAN:          No
      Current Power Source:          Yes
      Display Sleep Uses Dim:          No
      PrioritizeNetworkReachabilityOverSleep:          0
      RestartAfterKernelPanic:          157680000
      Battery Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          2
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
      RestartAfterKernelPanic:          157680000
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          Yes
      ID:          0x0100
      Wattage (W):          60
      Revision:          0x0000
      Family:          0x00ba
      Serial Number:          0x00f46317
      Charging:          No
    Power Events:
    Repeating Events:
      Type:          Wake or Power On
      Time:          07:30 00AM every day

  • Why is my battery showing it's fully charged at 95%?

    Why is my battery showing it's fully charged at 95%?

    that's normal.  between 95%-100% is considered a full charge.  It's to help extend the life of the battery.

  • My ipod works perfectly well when connected to my laptop, but won't even switch on when it's stand alone. Battery is showing as fully charged. Anyone know if/how I can fix this?

    Hi, my ipod nano works perfectly well when connected to my laptop, but won't even switch on when it's stand alone. Battery is showing as fully charged. Anyone know if/how I can fix this? Thanks

    Take the iPod  N ano to your local Apple Store or an AASP to be examined. 

  • Looking for a akku/battery replacement and/or extension for brand-new HP Envy 17-k288nz

    Any suggestions for a compatible battery for following HP Notebook Model?:
    HP Envy 17-k288nz
    -> looking for a replacement or extension with larger capacity? Didn't find any item in official HP Shop yet.
    -> Product Details: http://store.hp.com/SwitzerlandStore/Merch/Product.aspx?id=L1S45EA&opt=UUZ&sel=PCNB&lang=en-CH
    Thanks in advance!

    These are the only batteries made for it:
    4-cell, 41 WHr, 2.8A H Li-ion battery 756743-001
    4-cell, 48 WHr, 2.3 AH Li-ion battery 756745-001
    This is a "compatible" replacement:
    http://www.ebay.de/itm/4-cell-Laptop-Battery-for-HP-756745-001-/291421399950?pt=LH_DefaultDomain_0&h...
    Genuine:
    http://www.ebay.de/itm/756743-001-VI04-GENUINE-OEM-HP-BATTERY-14-8V-2700A-PAVILION-15-P-SERIES-/2914...
    There is no extended capacity battery available. 

  • Battery on brand new iPod touch drains when synced to a mac and now it won't charge. If you're thinking of buying a new iPod touch, don't bother. The batteries don't work.

    The battery on my son's brand new 64G iPod touch drained while it was synced yo the mac. Now it says 100% charged when it's connected to a charger, but drops to zero as soon as it's disconnected. It would appear that, either the battery is faulty or the battery indicator is faulty. iPod batteries are not supposed to drain while syncing. And rechargeable batteries are supposed to recharge after they have drained. Maybe I'm missing something simple here, does anyone know what it is?

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Keyboard issue in brand new Satellite L50-A-1EK

    Hi,
    I bought brand new Toshiba Satellite L50-A-1EK on 18/04/2014.
    I unboxed my computer and i have "small issue" with keyboard.
    It's really hard to push "g" and "h" actually those buttons working only when im pushing them hard.
    Is it a reason to go to shop with warranty card or can I fix it myself?
    Thaks for reply.
    jot

    >It's really hard to push "g" and "h" actually those buttons working only when im pushing them hard.
    This is hardware related issue.
    Either you would contact the dealer and would try to get the notebook replaced or you would contact the Toshiba authorized service provider available in your country to replace the keyboard.
    Greets

  • Screen Share for Brand New Mini Server

    Hello all,
    just unpacked the brand new Mac Mini Server and don't know what to do. We all work on laptops in my studio so have no keyboards to use with the thing. I haven't turned it on yet, but is there a way to immediately go into remote screen sharing so I can configure it etc? Thanks for any tips that keep me from having to go dig up a keyboard!

    Hi
    Do you see an option to Screen Share on a client mac?
    With the MacMini there should be two disks. One of them is for installing the Server Administration applications. Install these on a client mac - must be 10.6. Once installed launch Server Admin. Switch on your MacMini and connect it to the network. Good idea to have DHCP running somewhere. Presumably whatever you're using for your Router/Firewall? Make a note of the MacMini's Serial Number (first 8 characters) Launch Server Admin and dismiss the authentication prompt. Select "Set Up Remote Server" from the Server Admin Menu.
    It should be fairly obvious from there - hopefully?
    HTH?
    Tony

  • Battery on brand new Ipod Video

    I’m looking for advice to assess the quality of my Ipod battery.
    I bought a new 30GB video Ipod 2 weeks ago. During the first couple days I noticed that the battery indicator turned red rather quick, so I decided to apply the following battery test:
    I fully charged the battery and then played continuous music without stopping. While testing the Ipod, I played music in the most efficient way suggested – did not play video, didn’t change the volume, didn’t use the backlight, etc. After 8 hours the battery was empty! Can any one tell me if this is the normal duration of the battery? I thought that if I only played music, I could get up to 15 hours on my battery.
    Appreciate anyone’s comments.
    Ipod 5th Generation     Ipod

    Charge your iPod overnight. Set the volume at 50%. Turn the equalizer off. Set Repeat to All.
    Plug in the included earbud headphones, push play and walk away.
    If you don't get close to the advertised playtime, then post back.

  • Keyboard shortcut for creating new Desktop

    Switching from primarily using keyboard shortcut navigation on a PC, I've realized that the OS X is missing a keyboard shortcut for creating a new Desktop or Space. You need to use the mouse to do this, either by clicking the Add Desktop icon in the upper right corner of Mission Control, dragging and dropping an open window to the Add Desktop icon, or entering full screen mode. Though it is possible to toggle full screen mode using a keyboard shortcut under Systems Preferences, not all applications can enable full screen.
    Does anyone have a possible solution to this problem?

    Hi- There is no longer a dedicated key on your keyboard to do that. However, follow these steps to make one...
    Click on System Preferences, Keyboard, and then choose Keyboard Shortcuts tab. In the lefthand column, select Expose & Spaces On the right, you will see that Expose has several shortcut key options. Make sure that the checkbox for Desktop is filled in, and double click it, and press the keyboard key you would like to activate it. If I may suggest, F5 or F6 are good choices.
    That is it! You are good to go.

  • "Invalid Provisioning Profile. The provisioning profile included in the bundle {BUNDLENAME} [{BUNDLENAME}.app] is invalid. [Missing code-signing certificate.]" for brand new, vanilla Mac App

    In OS X Maverick's XCode, I created a brand new Mac > "Cocoa Application", with Core Data and Spotlight Importerl; about as vanilla a Cocoa application I could muster. 
    Under Preferences > Accounts, I signed in to my Mac Developer Account.
    In Targets > Identity, I set Signing to "Mac App Store", and was able to select my Mac Developer Account for "Team".
    I then went to Product > Clean, and then Product > Build for... > Running, and then Produt > Archive.
    In the Organizer, I select the resulting .app and click "Validate", and hit the Mac App Store radio, and hit "Next", and it's able to log into my Mac Developer Account.
    I select my Provisioning Profile in the dropdown, and click "Validate".
    It comes back with several errors:
    1 - "Invalid Provisioning Profile. The provisioning profile included in the bundle {BUNDLENAME} [{BUNDLENAME}.app] is invalid. [Missing code-signing certificate.] For more information, visit the Mac OS Developer Portal."
    2 - "The bundle identifier cannot be changed from the current value, '{DIFFERENT-BUNDLE-FROM-OTHER-PROJECT}'.  If you want to change your bundle identifier, you will need to create a new application in iTunes Connect.
    3 - Invalid Code Signing Entitlements.  The entitlements in your app bundle signature do not match the ones that are contained in the provision profile.  The bundle contains a key that is not included in the provisioning profile: 'com.apple.applications-identifier' in '{BUNDLENAME}.app/Contents/MacOS/{BUNDLENAME}'
    I was able to do the same process before, for a vanilla app, before Mavericks.  I'm not sure if this is a Mavericks error, or a fact that now I have multiple app projects.  Particularly odd is that DIFFERENT-BUNDLE-FROM-OTHER-PROJECT in error (2) is not the same bundle name as the current project's bundle.
    Would love any help you can provide!  Thank you!

    Seen this thread?
    New codesign behavior, --deep option 
    "Code signing has some interesting changes in Mavericks (that apparently haven't made it into the release notes yet...). Note that this is a change to the operating system, not to the devtools."

  • HT1438 Can I return for brand new iPad mini?

    I would like to return my 32GB iPad mini. It's brand new, unused, still in the box, never even turned on. But, i've lost the receipt for it. Can I still return it for a refund.

    If you purchased it at an Apple Store the date of sale was recorded via their Point of Sale System.
    You can check yourself by entering your serial number here: https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • Missing disc for brand new ipod 30gb

    I just bought a brand new 30gb. I'm leaving tomorrow for Mexico so I don't have time to go back to the store and SHRIEK that the cute little package that is teh correct size for a CD is carefully sealed adn absolutely empty. I have teh newest itunes from the website but I am assuming there is specific software on that disc that is for my ipod 30gb to talk with my Win XP. I went to Apple's site thinking this should be downloadable. Peoples install discs must get damaged. Does anyone know where I can get this as a download quickly??? Thanks

    The current version of iTunes and the iPod updater is all you need to use the iPod with your computer; recent iPods do not come with an installation CD. The iPod updater is available within iTunes 7 and is a standalone download for earlier versions of iTunes.
    (18068)

  • Trouble with battery in brand new PB

    I have recently bought my PB and I wonder if this is normal behaviour when in use: Fully charge battery will work normally until reaching 65% when it drops immediately to 0% (normal LED and sound notification is present and battery indicator shows no power in battery). Short time connection to charger (5 seconds) restores battery indicator to previous level ie 65%. Than unit work until it reaches 55% and scenario repeats as at 65% level. What should I do? Cheers

    Take it back if its new mine recently started having a similaar issue with the latest os update it seems to have about half life then next time i look at it its shutting down.

Maybe you are looking for

  • HELP!!! need to print to video ASAP. NOT WORKING

    Hey, I've been trying to print to video a 3 hour piece, well, it's segments of many movies for a film festival. Anyway, i've used like 4 decks now, trying to capture on dvcam, and everytime i record something to tape, it just records like pink fuzz.

  • PDF printing -- area contents overflows area content in line

    I have configured standard printing using fop.war in APEX 3.1. On occasion it produces a broken pdf file that cannot be opened with Adobe Reader 8. On the server, OC4J displays an INFO message: "area contents overflows area content in line". Sometime

  • Pc turns off after booting on

    I am running windows xp ,Barebone  MSI 8SI 865 GM2  machine with 2.4 ghz processor .If I start the P.C. by pushing the button on the front of the machine it takes 2 minutes to boot up to the widows come page. After 3 minutes Machine  turn off the mai

  • Report Script related question

    Hi Experts, I have written a report script in which I am using the {TABDELIMIT} formatting command, to get the output file as tab delimited. I am facing an issue when I use the <REPMBRALIAS command in my script because the output of this command is M

  • How to add the parameters onto the reports while calling from forms

    Hi all, I am using oracle forms 10g. I want to call a report from the form. But i dont know how to add parameters to the url while using web.show_document(); i have a sample code. But it does not add the forms values onto the url. DECLARE v_host varc