OSD: Creating reference image, cleanup
Hi,
When creating a reference image with SCCM, it has SMSTaksequence and other folders. Please advise howto cleanup these files decently, is there a step foreseen?
Jan Hoedt
This has been discussed a couple of hours ago in another thread that janhoedt started:
http://social.technet.microsoft.com/Forums/en-US/38c5356a-7226-4cd7-81c7-fc60ce8417fc/sccm-2012-osd-send-mails-on-sccm-2012-r2?forum=configmanagerosd#16850fc4-ce1f-4b12-9873-1b7c5844c0a4
Torsten Meringer | http://www.mssccmfaq.de
Similar Messages
-
OSD - Creating 1 Image with choice of Software & Driver Packages
I am kindda new to SCCM 2012. I was wondering if it is possible to have like 1 Windows 8.1 Image and when it is being deployed we get a prompt for choice of Driver and Application Packages. The reason is that we have different kind of laptops and different
requirements for software. It would be good to have a prompt where you can choose which Driver Package to deploy based on the hardware and choice of software package that depends of the user's department.Retrograde_PAK, a good majority of our software deployments occur based on our computer naming convention so having a decent naming convention would
be very helpful. I also create collections for all(most) of my software packages and am able to pull device records into their deployment collections based on membership queries again typically I leverage our naming convention but you could use any number
of things... AD location... Installed OS... basically anything that sccm has stored in its db for those records. then those collection are populated automatically based on those queries and the package is installed. -
Hi
I searched the net for the answer but can't seem to find any good explanation for my situation.
I would like to know if you can use reference image (Build and Capture) created on one SCCM 2012 site , without any customization, serial numbers, domain etc. on another SCCM 2012 site. I have to do the same tasks of preparing windows 8.1 bare metal for
6 companyes and It would save some time if I can create reference image only once .
Thank you for the answer.
ZigaThank you for the answer,
However I just tested my reference image that was created with config manager on site A (no MDT used) and deployed it to site B
I had no problems with the client and there is no information from site A in the registry or anywhere else, the client installed is also correct version that is used on site B and is newer than the client on site A (where i captured the reference image). FEP
deployed normaly and machine was domain joined with no problems.
Yep, only in one case it could go wrong, if for some incredible reason in site B the ccmsetup couldn´t be updated during first OSPhase start. Otherwise, because of that I wouldn´t bother to start building stand-alone MDT only because of that.
I never tested this, but if you want to get rid of ccmsetup from site A, you could mount wim and delete all ccmsetup and ccm folders, also need to mount registry and delete SMS hive. -
OSD reference image starts perfect, then begins to degrade resulting in BSOD during OSD
SCCM 2012 R2 on Server 2008R2.
We create our thick reference images in MDT after Patch Tuesday with a build and capture. We don't change our SCCM Deploy Windows TS so the package ID stays the same and we simply overwrite the old .Wim file each time. Our problem is that everything starts
out great and our Tier-2 techs are able to image machines as expected. But over time (it could be a week or a few days) during deployment machines begin to BSOD, get stuck with black screens with only a cursor, or Boot\BCD at the very end of the TS as Windows
starts services, or it'll build seemingly fine and MS Office will try to install for every user and the Windows search bar is missing. Just a bunch of weird nuances. But here's the kicker, if we build in a VM everything is perfect and works the way we designed
it in the reference build.
This TS deploys two OS's, The x64 begins to degrade, the x86 continues without any problems
The same reference image in a separate site (for testing) works fine with no issues. (SCCM 2012R2 on Server 2012)
After replacing the reference image Wim file the builds work, immediately
We only use boot media for our TS, no PXE
We build in the same OU for testing and production which blocks inheritance
Where ever you go, there you are.Why don't you add the new image to SCCM through the GUI like it's supposed to be done?
I think saying "supposed to" is a bit argumentative, especially since MDT integrates with SCCM. However, we want a clean non-site specific image so we can use it with more than one site. We use SCCM for OSD only, the SCCM agent does not remain after the
image is deployed on the client. Automating the image creation with Powershell in MDT is also a huge benefit.
Regardless, the image begins just fine. It seems something is changing in the environment over time and that's the real issue I believe, not our proven image creation method we've been using for well over a year. It wasn't until we upgraded from SCCM2012
to SCCM2012R2 that we began to see issues.
Where ever you go, there you are. -
Create dynamic image, dump on server someplace and reference in JSP?
I was thinking about creating dynamic images and referencing them on a JSP
(creating them is ok). I'm sure this is a pretty standard thing, but I
don't know how to do it. Any ideas? I tried doing a search on the BEA
support site (nice changes :>) but nothing very accurate came up.
Thanks.
Assign an ID (e.g. 1234) to the uploaded file. You should abstract the store
so that it will work on the file system or in the database.
The JSP will include an image ref to that ID, e.g.
http://www.myco.com/myapp/imageservlet?id=1234
The image servlet will retrieve and stream the image. It has to set content
type etc. You should also verify that the current user has access to the
requested image if security/privacy is an issue.
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com/coherence.jsp
Tangosol Coherence: Clustered Replicated Cache for Weblogic
"PHenry" <[RemoveBeforeSending][email protected]> wrote in message
news:[email protected]...
> Howdy. I just thought of something. If the img is coming across via the
> stream, how do you reference it in the html/jsp file? I just thought
about
> that now as I was getting a cup of coffee. (I need to cut back! :>)
>
> Thanks.
>
>
>
>
> "Cameron Purdy" <[email protected]> wrote in message
> news:[email protected]...
> > If you write it to a file, you are writing it to an OutputStream, right?
> >
> > Instead, just write it to the OutputStream that comes from the
HttpRequest
> > object. For example:
> >
> > <img src="http://www.mysite.com/myapp/my.jsp?name=whatever">
> >
> > That would hit your JSP (it would be better to use a Servlet in this
case
> > though), and you would stream back the image.
> >
> > Peace,
> >
> > Cameron Purdy
> > Tangosol, Inc.
> > http://www.tangosol.com/coherence.jsp
> > Tangosol Coherence: Clustered Replicated Cache for Weblogic
> >
> >
> > "PHenry" <[RemoveBeforeSending][email protected]> wrote in message
> > news:[email protected]...
> > > Interesting. I'm still a bit new to this stuff. Do you have/know
where
> > to
> > > find some examples?
> >
> >
> >
>
>
-
SCCM 2012 R2 OSD Win7, a Reference Image or Install.wim from the Win 7 media
I want to use thin image to deploy win7.
So do I need to built a reference Image, or I can use install.wim from Windows 7 media directly?
I saw someone suggest built a reference Image fist. so what different between builting a reference Image or using install.wim from Win7 media?Hi,
When you build your won reference image you can include your own software and Software Updates which makes it a lot faster to deploy. I normally add:
- Windows 7 hotfixes that are not delivered through WSUS/Microsoft Update
- Visual Studio Runtimes 2005,2008,2010,2012
- .NET framework 4.5
- And all the latest software updates from Microsoft.
So I recommend that you create your own image.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec
Also it's best practice to build and capture using a VM rather than physical.
Cheers
Paul | sccmentor.wordpress.com -
MDT 2013 - Error creating WIN 7 Reference Image
Hi Guys,
I am pulling my hair out!
I have tried to create a .wim image of a Win 7 set up on a VM machine (VM Workstation)
I have used the MDT task sequence, standard client task sequence. It has always failed on the creating WIM image stage. I have looked through the forum and checked permissions, ensured I have used an IP address for my Share, just cannot get rid
past this....
Please help Thanks.
I have added error messageI have added error message
Where?
If you are still having problems, please copy your bdd.log file to a public site like OneDrive, and share the link.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com -
SCCM OSD Reference Image / Install Application Failure
We are running 2012 R2 CU2 and are trying to build and capture a reference image for windows 8.1, his is not a MDT task Sequence. The image (WIM) seems to lay-down correctly however none of the applications seem to install and I believe it is because
the default build and capture sequence never actually logs in as a user? There are no requirement of the application preventing installation and the 'use in TS' check box is checked on the applications. Any thoughts.Have you examined the smsts.log?
Does the deployed OS have connectivity?
Have you added the SMSMP property to the Setup Windows and ConfigMgr task?
Jason | http://blog.configmgrftw.com -
Class casting, creating an image and decompiling...
Hi, I've got a couple of questions:
1)
How can I fully decompile classes, so with the implementation of the methods? Is it always possible to fully decompile a class file? When is it and when not?
2)
I aks this questions before, but I still haven't got it working, so sorry, but I ask it again :) :
I want to create my own class, for example cMyClass which extends the java.awt.Image class, which has abstract methods. How do these methods(for example getGraphics etc) have to be implemented?
3)
I can't cast a Image to cMyClass... why not?
Someone told me he did the following:
Canvas c = new Canvas()
cMyClass oImage = (cMyClass) c.createImage (100, 100);
and that this worked... I tried to do this too, and it seemed to work, but it actually didn't!!
I found out that c.createImage returns a null reference!!! That's why Java was able to cast it to my own cMyClass (not a problem to cast a null to something else), but when I created a Image (by doing a lot of unnessacary difficult stuff), and then tried to cast this Image to cMyClass it throw a ClassCastException or something like that...
How can I cast the java.awt.Image class to my class anyway?
3)
Why can't you create a image like i've done above or even like below:
Canvas c = new Canvas()
Image oImage = c.createImage (100, 100);
Why does this return a null reference?
Isn't there a better way to create an image?
4)
The getWidth and getHeight need a I thought observer...? Why is this? I just want the width and height and don't have an observer or something like that. Is there a way around this?
I tried getWidth(null) but this returns -1
Please help! :)Hi, I've got a couple of questions:
1)
How can I fully decompile classes, so with the
implementation of the methods? Is it always possible
to fully decompile a class file? When is it and when
not?You can always get a dump of the bytecode with 'javap -c'. If you don't want to figure things out yourself, try searching google for a class file decompiler, possibly a de-obfuscator.
De-compilation is completely possible if the original author wanted that, by including debugging information. Depending on the degree of such information and the amount of code obfuscation, the decompiled code may lack variable names, line numbers, field and method names, class names, and even code structure. Names and line numbers are usually not re-creatable automatically, since the information is simply lost, but you can replace them with your own strings when analyzing an unknown class file (using the correct tools). Re-creating the original code structure may work in some cases, but to me the general case looks rather close to the halt problem (i.e. not solvable).
Use a de-obfuscator, hope you've got good luck, and analyze the bytecode manually if that doesn't work.
2)
I aks this questions before, but I still haven't got
it working, so sorry, but I ask it again :) :
I want to create my own class, for example cMyClass
which extends the java.awt.Image class, which has
abstract methods. How do these methods(for example
getGraphics etc) have to be implemented?I don't really understand the problem. 'abstract' means on the language level that your subclass must provide an implementation, i.e. a method body. What that method is expected to do is explained in the javadocs for Image. But in fact you're free to do anything. You could play a sound in the getWidth() method (replace with any method name if you want). Just consider the fact that a lot of code calls getWidth in the hope of getting the width of the image, not playing a sound. So much about the language level.
On a higher level, a subclass of Image should implement a certain way to describe an image. AFAIK this means that your code must know the size of the image and know how to produce the pixels of the image. I can't tell you in general how you must do this, because it depends on your special case. This boils down to the question, why do you want to write a subclass of 'Image'? What new way of describing and image have you come up with?
3)
I can't cast a Image to cMyClass... why not?Simple, and that's certainly not an ALT. Because that specific Image is not a cMyClass. It's probably a BufferedImage or similar that was produced by AWT.
Please read the specs carefully what casting is about.
Someone told me he did the following:
Canvas c = new Canvas()
cMyClass oImage = (cMyClass) c.createImage (100,
100);
and that this worked... I tried to do this too, and it
seemed to work, but it actually didn't!!
I found out that c.createImage returns a null
reference!!! That's why Java was able to cast it to my
own cMyClass (not a problem to cast a null to
something else), but when I created a Image (by doing
a lot of unnessacary difficult stuff), and then tried
to cast this Image to cMyClass it throw a
ClassCastException or something like that...
How can I cast the java.awt.Image class to my class
anyway?You can't, and if you understood casting then you'd understand that it wouldn't make sense.
3, 4(don't know)
Maybe stupid question, but for example the BufferedImage, is this
completly written in Java?
How is the link made between the OS+hardware and the Java code? I
mean, displaying images etc. is very platform dependend not?Look for JNI (Java Native Interface). It's a way to link native (e.g. C) code with Java code. -
From results.xml:
<?xml version="1.0"?>
<Results><Errors>8</Errors><Warnings>0</Warnings><RetVal>-2147467259</RetVal><DeploymentType>CUSTOM</DeploymentType><Messages><![CDATA[FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Apply Windows PE.
Unknown error (Error: 00001550; Source: Unknown)
The execution of the group (Capture Image) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
Failed to run the last action: Apply Windows PE. Execution of task sequence failed.
Unknown error (Error: 00001550; Source: Unknown)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005]]></Messages></Results>
I have not only regenerated my boot files while updating my deployment share, I have completely rebuilt the MDT 2012 deployment share from scratch, and I'm still getting the exact same errors. I can't figure out what is causing this. The only hits for these
errors seemed to say that the -214... error is likely related to a missing file, but I don't know how to figure out what that might be. I don't know what the FAILURE ( 5456 ) could be caused by, either, although it seems to be related to not knowing what partition
should be imaged or imaged to. I haven't been able to find any reference to MDT needing a partition to image from/to set in a CS.ini property or in a task variable.
I am running a modified version of the Sysprep and Capture Task Sequence (set up as described at http://bjtechnews.org/2012/06/01/mdt-2012-capturing-a-reference-image-part-ii/, it's basically the default settings for that TS with the sysprep step disabled and
the "Set Image Folder" task variable created per that post--I ran sysprep myself, manually, on the machine before shutting it down to boot from USB) after booting a Dell Latitude 10 tablet from a USB drive created by extracting the contents of the
MDT 2012 DeploymentShare$\Boot\LiteTouchpe_x86.iso to a FAT32-formatted volume.Here is the second part of BDD.log:
<![LOG[VSSMaxSize not specified using 5% of volume.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Logs contained 8 errors and 0 warnings.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[No Windows PE image to delete.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Stripping BDD commands from unattend.xml template.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Modified unattend.xml saved to C:\windows\panther\unattend.xml]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Checking mapped network drive.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[testing drive Z: mapped to \\NCSD-WDS\DeploymentShare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Disconnecting drive Z: mapped to \\NCSD-WDS\DeploymentShare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[testing drive Y: mapped to \\ncsd-wds.ncsd.local\deploymentshare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Cleaning up C:\MININT directory.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Cleaning up TOOLS, SCRIPTS, and PACKAGES directories.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="21:18:44.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Not Wizard = False]LOG]!><time="00:44:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property WizardComplete is now = N]LOG]!><time="00:44:07.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[ Open Control File: TaskSequences]LOG]!><time="00:44:08.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[CleanStartItems Complete]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[ZTIUtility!GetAllFixedDrives (False)]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #2" \\MININT-IDKMK2C\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #1, Partition #0" \\MININT-IDKMK2C\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE1"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[ZTIUtility!GetAllFixedDrives = C:]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Not Wizard = False]LOG]!><time="00:54:54.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property WizardComplete is now = N]LOG]!><time="00:54:55.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[ Open Control File: TaskSequences]LOG]!><time="00:54:56.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property TaskSequenceID is now = CAPTURE001]LOG]!><time="00:55:00.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence Item: //step[@type='BDD_InstallOS']]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence step of type //step[@type='BDD_InstallOS'] = False]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Task Sequence does not contain an OS and does not contain a LTIApply.wsf step, possibly a Custom Step or a Client Replace.]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[DeploymentType = CUSTOM]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageProcessor is now = ]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property OSGUID is now = ]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property TaskSequenceName is now = Capture reference image]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property TaskSequenceVersion is now = 1.0]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property TaskSequenceTemplate is now = CaptureOnly.xml]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property OSGUID is now = {9c976969-ab45-405b-82e7-d8a429228a67}]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageIndex is now = 1]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageSize is now = 7934]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageFlags is now = Professional]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageBuild is now = 6.2.9200.16384]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageProcessor is now = x86]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ImageLanguage001 is now = en-US]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[InstallFromPath: \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86\Sources\install.wim]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property InstallFromPath is now = \\ncsd-wds\latitude10deploy$\Operating Systems\Windows 8 Pro x86\sources\install.wim]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[SourcePath: \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property SourcePath is now = \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence Item: //step[@type='BDD_InstallRoles']]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence step of type //step[@type='BDD_InstallRoles'] = ]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence Item: //step[@type='BDD_InstallApplication' and ./defaultVarList/variable[@name='ApplicationGUID'] and ./defaultVarList[variable='']]]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence step of type //step[@type='BDD_InstallApplication' and ./defaultVarList/variable[@name='ApplicationGUID'] and ./defaultVarList[variable='']] = ]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence Item: //step[@name='Create WIM']]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence step of type //step[@name='Create WIM'] = True]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence Item: //step[@name='Create WIM']]LOG]!><time="00:55:19.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Found Task Sequence step of type //step[@name='Create WIM'] = True]LOG]!><time="00:55:19.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Validating connection to \\NCSD-WDS\Latitude10Deploy$\Captures]LOG]!><time="00:55:32.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Already connected to server NCSD-WDS as that is where this script is running from.]LOG]!><time="00:55:33.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property TSGuid is now = {ed8ed1ac-ab1a-448d-97b5-0d4cb1f7ef95}]LOG]!><time="00:55:38.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property OSGUID is now = ]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property DeploymentType is now = CUSTOM]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property DoCapture is now = YES]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property ComputerBackupLocation is now = \\NCSD-WDS\Latitude10Deploy$\Captures]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property BackupFile is now = CAPTURE001.wim]LOG]!><time="00:55:40.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property WizardComplete is now = Y]LOG]!><time="00:55:40.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Setting variable ComputerBackupLocation to value \\ncsd-wds.ncsd.local\Latitude10Deploy$\Captures]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Property ComputerBackupLocation is now = \\ncsd-wds.ncsd.local\Latitude10Deploy$\Captures]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:46.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Setting variable ImageBuild to value 6.2.9200]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Property ImageBuild is now = 6.2.9200]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:48.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Setting variable ImageFlags to value %OSSKU%]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Property ImageFlags is now = %OSSKU%]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:50.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Setting variable PHASE to value STATERESTORE]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Property PHASE is now = STATERESTORE]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:52.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
<![LOG[---------------- Initialization ----------------]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Validating connection to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Already connected to server NCSD-WDS as that is where this script is running from.]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[DestinationOSInstallType = BYDISKPARTITION]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Found: DestinationDisk: 0]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Found: DestinationPartition: 1]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No drive mapped to Disk Partition: \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Unable to yield a target Partition (Special Recovery option for Litetouch).]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[DestinationDisk and Partition did not yield a target Partition.]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Destination Logical Drive was not specificed, defaulting to #:\]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Looking for Sysprep.inf in #:\sysprep\Sysprep.inf]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[The sysprep.inf file was not found.]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Property OSDAnswerFilePathSysprep is now = ]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[The unattend.txt file was not found.]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Found unattend.xml at \\NCSD-WDS\Latitude10Deploy$\Control\CAPTURE001\Unattend.xml, will copy to C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Copied \\NCSD-WDS\Latitude10Deploy$\Control\CAPTURE001\Unattend.xml to C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Property OSDAnswerFilePath is now = C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Loaded C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for ComputerName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for FullName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for OrgName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for ProductKey]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for JoinDomain]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for MachineObjectOU]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for JoinWorkgroup]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for DomainAdmin]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for InputLocale]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Language]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for LanguageGroup]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for SystemLocale]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UserLocale]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for TimeZone]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AutoLogon]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AutoLogonCount]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for BitsPerPel]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Xresolution]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Yresolution]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Vrefresh]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AreaCode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for CountryCode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Dialing]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for LongDistanceAccess]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Home_Page]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AutoMode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AutoUsers]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[//settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/UpgradeData/Upgrade not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for OSDComputerName]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for ProductKey]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Removed parent of //settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/UserData/ProductKey/Key from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-Shell-Setup"]/ProductKey from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for JoinDomain]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-UnattendedJoin"]/Identification/MachineObjectOU from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for JoinWorkgroup]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for DomainAdmin]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for DomainAdminDomain]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with InstallFromPath=\\ncsd-wds\latitude10deploy$\Operating Systems\Windows 8 Pro x86\sources\install.wim (value was .\Operating Systems\Windows 8 Pro x86\Sources\install.wim)]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[//settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/ImageInstall/OSImage/InstallFrom/MetaData[Key="/image/index"]/Value not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with ImageIndex=1 (value was 1)]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated PlainText entry to true.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated PlainText entry to true.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[//settings[@pass="oobeSystem"]/component[@name="Microsoft-Windows-Shell-Setup"]/UserAccounts/LocalAccounts not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Organization]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for FullName]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for BitsPerPel]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Xresolution]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Yresolution]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Vrefresh]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for AreaCode]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for CountryCode]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for LongDistanceAccess]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for LongDistanceAccess]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-Shell-Setup"]/TimeZone from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Removed //settings[@pass="oobeSystem"]/component[@name="Microsoft-Windows-Shell-Setup"]/TimeZone from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for KeyboardLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for KeyboardLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UserLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UserLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UserLocale]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UserLocale]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UILanguage]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for UILanguage]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for Home_Page]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for OrgName]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for OrgName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for FullName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[No value found for FullName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with DestinationDisk=0 (value was 0)]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Updated C:\MININT\Unattend.xml with DestinationPartition=1 (value was 1)]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Rewrote C:\MININT\Unattend.xml with changes]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[ZTIConfigure COMPLETED. Return Value = 0]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[ZTIConfigure processing completed successfully.]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Event 41001 sent: ZTIConfigure processing completed successfully.]LOG]!><time="00:56:05.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
<![LOG[Will boot into Windows PE architecture x86 to match OS being deployed.]LOG]!><time="00:56:06.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[DestinationOSInstallType = BYDISKPARTITION]LOG]!><time="00:56:06.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Found: DestinationDisk: 0]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Found: DestinationPartition: 1]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[No drive mapped to Disk Partition: \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Unable to yield a target Partition (Special Recovery option for Litetouch).]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[DestinationDisk and Partition did not yield a target Partition.]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="3" thread="" file="LTIApply">
<![LOG[Event 41002 sent: FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.]LOG]!><time="00:56:08.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Removing AutoAdminLogon registry entries]LOG]!><time="00:56:12.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[VSSMaxSize not specified using 5% of volume.]LOG]!><time="00:56:12.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Logs contained 8 errors and 0 warnings.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[No Windows PE image to delete.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Stripping BDD commands from unattend.xml template.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Modified unattend.xml saved to C:\windows\panther\unattend.xml]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Checking mapped network drive.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[testing drive Z: mapped to \\ncsd-wds.ncsd.local\deploymentshare$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[testing drive Y: mapped to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Disconnecting drive Y: mapped to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Cleaning up C:\MININT directory.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Cleaning up TOOLS, SCRIPTS, and PACKAGES directories.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
<![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="00:56:15.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> -
Variable .wim file (BackupFile) using %TaskSequence% not working for reference image
Hello,
I am trying to make a semi-automated solution for building reference image. The goal is to just select a task sequence and based on only that input create a reference image and store it on the MDT server as a unique named .wim file. I'm doing almost exactly
the same as all the pro's (Johan, Mikael, etc.). What I do is in the CustomSettings.ini I specify BackupFile to be %TaskSequenceID%.wim. My goal with that is to get a .wim file that is called REFWIN81CORENLX64.wim. Instead of that I get %TaskSequenceID%.wim.
I'm banging my head against the wall all day now and I have even build another environment to see if the problem occurs there too. It does..
I'm hoping that someone can tell me what Ido wrong.
MathijsShort Answer:
You have programmed a race condition into your system.
Long answer:
MDT will fill out the TaskSequenceID variable during the MDT LiteTouch Wizard.
You put the BackupShare variable in your CS.ini file:
BackupShare=\\MDT02\MDTBuildLab$\%TaskSequenceID%
However, the CS.ini was ALREADY processed *BEFORE* the MDT LiteTouch Wizard. and since TaskSequenceID was set to <BLANK> then Backupshare becomes the value above. ANy attempt to re-parse the cs.ini file will not process BackupShare because ZTIGather.wsf
will only pick up the value the first time.
Instead you should set the BackupShare variable *AFTER* the MDT Litetouch Wizard, if you want to leave it in your CS.ini file, then use Johan's method to re-parse the CS.ini file during the Task Sequence.
http://www.deployvista.com/tabid/36/EntryID/139/language/en-US/Default.aspx
-k
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com -
Exporting projects that reference images in other projects
Hello, all. I'm wondering if anyone out there has had luck exporting projects that reference images in another project. I've just given this a try, and I get empty images (dotted gray outlines that can't be multi-selected and can't be "managed" as referenced files, even though it knows where the original file should be).
Here's how I have things set up:
1. main project with referenced images
2. secondary project with an album that references images in the main project (secondary project shows 0 images, but album in secondary project shows N images)
I export the secondary project, and import it into another Aperture instance. All images show up as dotted outlines.
Furthermore, if I go into list view, the Activity Monitor does something bizarre. It shows the # thumbnails remaining as a moving target. See the video below for an example.
Any help would be greatly appreciated. Thank you!
Screen captures:
Missing images as dotted outlines:
http://echeng.com/temp/aperture-missing-images.png
Small video of thumbnail creating bug:
http://echeng.com/temp/aperture-thumbnail-bug.movI do this sort of thing constantly and things a whole lot more complicated. It works fine on all three of my laptops and my macpro. I actually just tried to simulate the exact conditions you describe and I will tell you what happened.
1)Create new empty project in library A called "export"
2)Create new empty album in that project.
3)Dragged multiple images from different projects (all referenced) into that new album.
4)Used file->export project with the consolidate images checked. Imported that project into a new/different library.
All of the images showed up and they all showed up as managed masters as expected. So I then relocated the masters from that project and did the same thing in reverse, back to the old library. I ended up with another project called "export (1)" with all of the images referenced and having nothing to do with the original project or the original referenced masters - as expected.
I did the testing not to figure it out but to validate that nothing had changed or broken since the last update.
You are either not doing what you think you are doing or your library/library is forked - you may want to try a rebuild or just create a brand new set of libraries and try to validate that it will work with a brand new set of libraries to try to isolate the issue to 1 - your existing libraries or 2 - your installation.
RB -
Reference images outside the database
Hi,
I tried to return html content from a pl/sql procedure but the images referenced were missing. Attached please see the part of the coding in the pl/sql procedure. Everything worked except the images. When I specified something like <img src="" />, the image would come up. Whenever I included an inline (or external) stylesheet in the pl/sql procedure, the images were not picked up.
Thanks.
Andy
Here is the code:
CREATE OR REPLACE PROCEDURE test_email AS
ret_code integer := -1;
begin
-- Send email
select db_mail.send_mail('[email protected]',
'test email',
'<html>
<head>
<title></title>
<style type="text/css">
div#pullquote
background: #fff url(<reference image in another server>) no-repeat;
div#pullquote p
padding: 0 20px;
div#pullquote h2
margin: 0;
padding: 20px 20px 0 20px;
background: url(<reference image in another server>) no-repeat 100% 0;
div#pullquote p.furtherinfo
text-align: right;
</style>
</head>
<body>
<!-- start content -->
<img src="http://<server name>:7778/i/themes/custom/hrims_logo.gif" alt="" class="left" />
<div id="pullquote">
<h2></h2>
<h3>this is a test</h3>
</div>
<!-- end content -->
</body></html>',
'HRiMS',
'text/html')
INTO ret_code
FROM dual;
end test_email;CREATE OR REPLACE PROCEDURE test_email AS
ret_code integer := -1;
begin
-- Send email
select db_mail.send_mail('[email protected]',
'test email',
'<html>
<head>
<title></title>
<style type="text/css">
div#pullquote { background: #fff url(<reference image in another server>) no-repeat; }
div#pullquote p { padding: 0 20px; }
div#pullquote h2 { margin: 0; padding: 20px 20px 0 20px; background: url(<reference image in another server>) no-repeat 100% 0; }
div#pullquote p.furtherinfo { text-align: right; }
</style>
</head>
<body>
<!-- start email content --><div id="pullquote"><h2></h2>this is a test</div>
<!-- end content -->
</body></html>',
'HRiMS',
'text/html') INTO ret_code FROM dual; end test_email;The database version is 10.2.0.1.0.
I'm trying to use PL/SQL to generate email content in HTML.
Thanks.
Andy -
I have JSP a page, were I want to show Thumbnail Image from specified path. The specified path contain one or more file. If anybody have the code or reference for doing this please replay. (For one image will also the helpfule for me)
Thank YouThe following is what I use to create thumbnail images. It uses struts, is a bit of a haste work but never failed in creating thousands of thumbnails. I'd be glad if you suggest improvement.
import java.io.*;
import java.text.*;
import java.util.*;
import org.apache.struts.upload.FormFile;
import javax.imageio.ImageIO;
import java.awt.*;
import java.awt.image.BufferedImage;
import org.apache.log4j.Logger;
* @author Niklas
public class ClassifiedImage {
Logger log = Logger.getLogger(this.getClass());
/** Creates a new instance of ClassifiedImage */
public ClassifiedImage() {
public void generateImage(FormFile file, String outputFilename, String outputthumbFilename) {
try {
String type = file.getContentType();
String name = file.getFileName();
int size = file.getFileSize();
byte[] data = file.getFileData();
if (data != null && name.length() > 0) {
ByteArrayInputStream bis = new ByteArrayInputStream(data);
BufferedImage bi = ImageIO.read(bis);
int width = bi.getWidth();
int height = bi.getHeight();
Image thumb = null;
if (width > 600 || height > 600) {
Image scaledimage = null;
if (width > 600) {
scaledimage = bi.getScaledInstance(600, -1, Image.SCALE_SMOOTH);
thumb = bi.getScaledInstance(80, -1, Image.SCALE_SMOOTH);
BufferedImage scaledBuffImage = StrutsUploadAction.toBufferedImage(scaledimage);
BufferedImage thumbBuffImage = StrutsUploadAction.toBufferedImage(thumb);
int newWidth = scaledBuffImage.getWidth();
int newHeight = scaledBuffImage.getHeight();
int thumbBuffImagenewWidth = thumbBuffImage.getWidth();
int thumbBuffImagenewHeight = thumbBuffImage.getHeight();
if (thumbBuffImagenewHeight > 60) {
thumb = thumbBuffImage.getScaledInstance(-1, 60, Image.SCALE_SMOOTH);
if (newHeight > 600) {
scaledimage = scaledBuffImage.getScaledInstance(-1, 600, Image.SCALE_SMOOTH);
BufferedImage scaledthumbBuffImage = StrutsUploadAction.toBufferedImage(thumb);
BufferedImage scaledBuffImage2 = StrutsUploadAction.toBufferedImage(scaledimage);
int newWidth2 = scaledBuffImage2.getWidth();
int scaledNewHeight = scaledBuffImage2.getHeight();
String formatName = "jpg"; // desired format
File outputFile = new File(outputFilename);
File outputthumbfile = new File(outputthumbFilename);
if (width > 600 || newHeight > 600) {
boolean writerExists = ImageIO.write(scaledBuffImage2, formatName, outputFile);
boolean writerthumbExists = ImageIO.write(scaledthumbBuffImage, formatName, outputthumbfile);
} else if (height > 600) {
Image scaledimage2 = bi.getScaledInstance(-1, 600, Image.SCALE_SMOOTH);
thumb = bi.getScaledInstance(-1, 60, Image.SCALE_SMOOTH);
BufferedImage scaledBuffImage2 = StrutsUploadAction.toBufferedImage(scaledimage2);
int newWidth2 = scaledBuffImage2.getWidth();
int newHeight2 = scaledBuffImage2.getHeight();
BufferedImage scaledthumbBuffImage2 = StrutsUploadAction.toBufferedImage(thumb);
int newthumbWidth2 = scaledthumbBuffImage2.getWidth();
int newthumbHeight2 = scaledthumbBuffImage2.getHeight();
if (newWidth2 > 600) {
scaledimage2 = scaledBuffImage2.getScaledInstance(600, -1, Image.SCALE_SMOOTH);
if (newthumbWidth2 > 80) {
thumb = scaledthumbBuffImage2.getScaledInstance(80, -1, Image.SCALE_SMOOTH);
BufferedImage ndscaledBuffImage2 = StrutsUploadAction.toBufferedImage(scaledimage2);
BufferedImage ndscaledthumbBuffImage2 = StrutsUploadAction.toBufferedImage(thumb);
int n_newWidth2 = ndscaledBuffImage2.getWidth();
int n_newHeight2 = ndscaledBuffImage2.getHeight();
String formatName2 = "jpg"; // desired format
File outputFile2 = new File(outputFilename);
File outputfile3 = new File(outputthumbFilename);
if (height > 600 || newHeight2 > 600) {
boolean writerExists2 = ImageIO.write(ndscaledBuffImage2, formatName2, outputFile2);
boolean writerExists3 = ImageIO.write(ndscaledthumbBuffImage2, formatName2, outputfile3);
} else {
FileOutputStream fileOut = new FileOutputStream(outputFilename);
fileOut.write(data);
fileOut.flush();
fileOut.close();
BufferedImage b = null;
ByteArrayInputStream bi2 = new ByteArrayInputStream(data);
BufferedImage bufi2 = ImageIO.read(bi2);
int width2 = bi.getWidth();
int height2 = bi.getHeight();
Image thumbnail2 = null;
if (height2 > width2) {
thumb = bufi2.getScaledInstance(-1, 60, Image.SCALE_SMOOTH);
BufferedImage scaledBuffImagethumb = StrutsUploadAction.toBufferedImage(thumb);
int newWidth7 = scaledBuffImagethumb.getWidth();
int newHeight7 = scaledBuffImagethumb.getHeight();
if (newWidth7 > 80) {
thumb = scaledBuffImagethumb.getScaledInstance(80, -1, Image.SCALE_SMOOTH);
b = StrutsUploadAction.toBufferedImage(thumb);
} else {
thumb = bufi2.getScaledInstance(80, -1, Image.SCALE_SMOOTH);
BufferedImage scaledthumb = StrutsUploadAction.toBufferedImage(thumb);
int scaledthumbwidth = scaledthumb.getWidth();
int scaledthumbheight = scaledthumb.getHeight();
if (scaledthumbheight > 60) {
thumb = scaledthumb.getScaledInstance(-1, 60, Image.SCALE_SMOOTH);
b = StrutsUploadAction.toBufferedImage(thumb);
File f = new File(outputthumbFilename);
boolean bo = ImageIO.write(b, "jpg", f);
} catch (Exception e) {
log.error(e.getMessage(), e);
}And the helper method:
// This method returns a buffered image with the contents of an image
public static BufferedImage toBufferedImage(Image image) {
if(image instanceof BufferedImage) {
return (BufferedImage)image;
// This code ensures that all the pixels in the image are loaded
image = new ImageIcon(image).getImage();
// Determine if the image has transparent pixels; for this method's
// implementation, see e661 Determining If an Image Has Transparent Pixels
boolean hasAlpha = false;
// Create a buffered image with a format that's compatible with the screen
BufferedImage bimage = null;
GraphicsEnvironment ge = GraphicsEnvironment.getLocalGraphicsEnvironment();
try {
// Determine the type of transparency of the new buffered image
int transparency = Transparency.OPAQUE;
if(hasAlpha) {
transparency = Transparency.BITMASK;
// Create the buffered image
GraphicsDevice gs = ge.getDefaultScreenDevice();
GraphicsConfiguration gc = gs.getDefaultConfiguration();
bimage = gc.createCompatibleImage(image.getWidth(null), image.getHeight(null), transparency);
} catch(HeadlessException e) {
// The system does not have a screen
if(bimage == null) {
// Create a buffered image using the default color model
int type = BufferedImage.TYPE_INT_RGB;
if(hasAlpha) {
type = BufferedImage.TYPE_INT_ARGB;
bimage = new BufferedImage(image.getWidth(null), image.getHeight(null), type);
// Copy image to buffered image
Graphics g = bimage.createGraphics();
// Paint the image onto the buffered image
g.drawImage(image, 0, 0, null);
g.dispose();
return bimage;
} -
Hi Everybody,
how can i reference images in css of a JspDynPage? Until now i used the following piece of code which only works if i put the css inside my jsp file. What could be the reason? When i put the css part in a seperate file the images are not referenced.
index.jsp:
<% String mimeUrl = componentRequest.getWebResourcePath(); %>
<link rel="stylesheet" href='<%=mimeUrl+"/css/myStyle.css"%>' type="text/css" />
<ul class="glossymenu">
<li><a href="http://www.dynamicdrive.com/style/"><b>CSS</b></a></li>
<li><a href="http://www.dynamicdrive.com/forums/"><b>Forums</b></a></li>
</ul>
myStyle.css:
<style>
.glossymenu{
position: relative;
padding: 0 0 0 34px;
margin: 0 auto 0 auto;
background: url(<%=mimeUrl%>/images/menub_bg.gif) repeat-x;
height: 46px;
list-style: none;
</style>
regards,
Seed
Edited by: seed_mopo on Aug 18, 2008 10:42 AMHi,
the jsp code in your css file is never executed by the server. This line of code in your css file will remain the same (check by accessing the css file via your browser):
url(<%=mimeUrl%>/images/menub_bg.gif)
your options are:
- add the full path in your css file (add the <%=mimeUrl%>/images/menub_bg.gif as a temporary printout to your jsp and view the full path)
- put this section or all of the css definition locally in your jsp file
- create a jsp file with all the css definitions that is included as a jsp file
JSP code will only execute within jsp pages which are rendered by the application server. Any code added to external files such as js or css files will not render.
Cheers,
Dion
Maybe you are looking for
-
How do i move a picture from one pdf-file to another already created pdf-file with adobe reader?
How do I move a picture from one pdf-file to another, already created pdf-file, with adobe reader?
-
Why is it that Apple have no interest in helping I have a iPhone 4S and since updating to ISO 7.0.4 I have no wifi at all told me it's a hardware issue and I will be charged for the repair as it's just over a yr old so I've got a 24 month contract so
-
I have installed iCloud a number of times on my HP laptop running Windows 7.
I have installed iCloud a number of times on a high powered Windows 7 notebook computer. It goes through the complete instalation WITHOUT EVER asking me to make an account for icloud with an ID and password for iCloud. When I try to start icloud for
-
When I mirror my macbook pro to my apple tv the only thing that shows up is one video that's on my desktop. How can I watch something that's online on my laptop, on my apple tv?
-
Too many process runing afther autoconfig.
Afther apply in a midlle tier LINUX red hat 4.0 We find that whole work ok, but.... for each process that we have before patch we have many .... for example ps -edf | grep oracle.apps.xdp.dequeuer.core.QueueService | wc -l 452 before 50 With reports