OSD Drivers don't seem to be auto applying..not sure why

I have made sure that every single driver from the driver pack and otherwise for this model is in my driver database for my HP 820 (Win7 x64) but for some reason it doesn't appear to be auto applying the drivers for this model only, all my other models deploy
with no problem. When the TS fails after the windows setup and config mgr then reboot task, it fails on any any install package that follows. Here is the log file...any advice for getting the drivers to install properly if in fact that is the issue?
http://1drv.ms/1fTSPDL

What is this step for wireless configuration?
Failed to run the action: Configure Wireless.
The system cannot find the file specified. (Error: 80070002; Source: Windows)
It appears to be failing there but might not be the root cause.
There is a lot of unknown host (gethostbyname failed) errors which indicate name resolving issues:
Please check this thread:
http://social.technet.microsoft.com/Forums/en-US/3e0c1fe6-7009-434e-bb3b-7c581f6efe97/unknown-host-gethostbyname-failed?forum=configmgrosd

Similar Messages

I am walking through Apples tutorial getting started with iOS development. I am at the storyboard area and can't seem to drag the cancel button to the green exit. I am not sure why the exit button doesn't except it. Is anyone else having this issue?

I am walking through Apples tutorial getting started with iOS development. I am at the storyboard area and can't seem to drag the cancel button to the green exit. I am not sure why the exit button doesn't except it. Is anyone else having this issue? Is there a work around? I have done this app twice and still cant get the exit to except the Cancel or Done bar buttons

Yes I checked it. As far as I can see I did everything Apple said to do. I took some screen shot so you can see how the screens are connected and what and where the code is, and what it does when I drag the cancel and done bar buttons to the exit

My iphone5 crashed Wed May 29 and I am not sure why.. I had to do a restore and have been trying to slowly get everything back on the phone... Yesterday June 6 it blacked out once and I don't have everything on the phone as before.... New one?

My iphone5 crashed Wed May 29 and I am not sure why.. I had to do a restore and have been trying to slowly get everything back on the phone... Yesterday June 6 it blacked out once and I don't have everything on the phone as before.... Is it damaged and should I try to get a new one?

Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone

HT201109 Why am I getting this message when I am signed in with the account that I purchased it I don't have another account I'm not sure what's going on here's the message I keep getting my:"To update this application sign into the account you used to pu

I am trying to update my Final Cut Pro X which I have done many times before.
Why am I getting this message now?
--- here's the message I keep getting every time I try to download the update--
"To update this application sign into the account you used to purchase it"
I am signed in with the account that I purchased it I don't have another account I'm not sure what's going on

Open up iTunes. Go to Store. Go to Account and sign in. Click on Purchase History. Find your purchase record.
Good luck
Russ

My photoshop cs6 seems to be running very slow lately--not sure why? [was:question-please help]

My photoshop cs6 seems to be running very slow lately--not sure why?

Have you tried resetting your PRAM?
Shut the Mac down.
Holding the Cmd+Opt+P+R keys, press the power button.
Listen for the "startup chime" to sound three times and release the keys.
It should run better after it finishes booting up.

Have an iMac. Problem is I hear the fan noise, yet no power on the screen yielding no power. I have checked the power cord and it seems to be fine. Not sure if computer is a total loss. What would be the next step?

Have an iMac. Problem is I hear the fan noise, yet no power on the screen yielding no power. I have checked the power cord and it seems to be fine. Not sure if computer is a total loss. What would be the next step?
<Email Edited by Host>

What does the EMC# say on the base?

HT4098 I am trying to cancel an auto renewal but it has to be done threw my settings but I'm not sure how I tryed to do this before but it told me to push a button but there was no button can u help please

I am trying to cancel my subscription but can't seem to do so it says to go threw my settings and do it but there no button to push to cancel it can you help ?

Did you reread the instructions in the support article that led you to this forum?
http://support.apple.com/kb/ht4098
To turn off auto-renewal:
From your Manage App Subscription page, choose an app subscription.
Tap the subscription category for which you want to disable auto-renewal.
Tap On to toggle the switch to Off.
You'll receive a confirmation message; tap Turn Off to confirm your choice.

I have $10.60 in my ITunes account. Wanted to buy a book fo $9.99 but it says I don't have enough. Not sure why this is happening...is there tax on the books?

I have $10.60 in my ITunes account. I tried to download a bok for $9.99 but keep getting the message that I have insufficient funds for purchase and am redirected to the billing page. Not sure why this is happening....is there tax on the books?

Yes, there is applicable tax charged on all purchases.

HP CM1312MPF drivers don't work via Windows 7 but works fine via Linux dual booting

HP CM1312MPF drivers don't seem work using Windows 7 (64-bit) . Original HP drivers CD now lost. Current drivers were downloaded from HP's website. (This webpage has a number of drivers and most 64-bit ones have been tried. Prior to my Windows re-install, the machine printed and scanned satifactoralily in Windows 7. One day this O/S refused to boot and had to be fully re-installed. The reinstall has been tried on both a SSD and on a HDD. (I have 3 x HDDs and 1 x SSD in this Desktop system. and I dual boot Windows7 and Linux Mint with data on its own HDD.) No attempt has yet been made to scan after this Windows re-install, as I have a separate photo scanner. I mainly wish on the to print on CM1312MPF, however it did scan perfectly well prior to the reinstall of Windows. THE CM1312MPF PRINTS FINE VIA THE SAME USB OUTPUT LEAD (AND POWERED HUB) AS VIA LINUX MINT 17 (PETRA) when I dual boot and without any PHYSICAL CHANGES between changing O/Ss. It must be a driver problem, surely, mustn't it? I look forward to your help. John_of_Penrith

You can also disable that windows wireless "Critter" from device manager and it shouldn't ever again show-up in your adapter list. Thanks for the lesson. I too have wondered about the windows virtual adapter and what it's for. I never had it show-up in my adapters though in the network and sharing center. That was strange that it happened to you. I also occasionally just go to device manager and reload the adapter that came with laptop-not the windows one. It
seems to keep it running fairly well since there have been no new drivers for it. I think it was an experiment or something called the DW1501 Wireless half-mini n that came with my Dell Inspiron N7010 laptop. I don't particularly like it as compared to the other wireless adapters in my home, this thing is slow on downloads, but I don't want to bother to get a new adapter.
Anyhow thanks for the interesting lesson.
LindaSView

Auto brightness not working -new screen protector or 4.0.2 to blame?

Hi there,
I recently bought a couple of new cases for my ipod touch (latest gen 64gb.
They both came with a 'free' screen protector, one of which I have applied, can't recall which case it came with though. (and I'm not sure that matters anyway?)
Since I applied the new screen protector I don't seem to have auto brightness any more.It is there, in the settings screen. But it doesn't seem to be working.
I've tried switching it (the setting) on and off, turning the ipod off.
I applied the protector around the same time that I updated to 4.0.2 (8A400) - I may have done the update. I 'think' I udated the unit the day before but I cannot really recall. I don't remember on what day I did which change so can't say what is causing this error.
Is anyone else getting auto brightness errors after going up to 4.0.2?
Is this kind of issue common with some screen protectors?
New ipod user - never had an apple anything before this - had it about 2 months.
Suggestions are GO

This morning, I updated to iOS4.0.2. I went to sleep with Pandora on (I work midnight shift) and when I awoke, I switched to mail and lost the music. Verified it wouldn't stay on and proceeded to do a hard reset (held down on/off switch and home button simultaneously well over ten seconds (( apple came on and then went blank/off again ))). Turned my iPhone 3GS on again and problem was gone. Hope this helps you too.

Issue with Update Rollup 5 for Exchange 2010 SP3 - Mailboxes that were auto mapped not working

Below is my response in another thread but creating a new one in the hopes that someone has the same issue and a solution besides mine below.
Ever since we installed Update Rollup 5 for SP3 Exchange 2010 mailboxes that were auto mapped are not accessible. They all get the same error.
Cannot expand the folder. The set of folders cannot be opened. The attempt to log on to the Microsoft Exchange has failed.
What I have been doing is removing the users permission, then adding them back using the noautomap switch in Powershell. After doing that, the user manually adds the mailbox and all is well.
Just a note here, I suspect it may have something to do with the version of Outlook 2010. We are running an older version here. I think only SP1 with no other incremental updates. Office is up to SP2. Also, one of the users I was working with could not access
the mailbox no matter what we tried but she can walk over to another workstation and open Outlook and access the very same mailbox so that pretty much proves its software related particularly with Outlook.
I cannot reproduce the problem on a workstation (XP) with a newer version of Outlook.
This has been wearing me out and I suspected the Update Rollup all long. Now I am confident as others are having the same problem. If you find out anything on how to fix this other than the steps above, let me know.

Not sure why it was suggested to use the auto mapping feature to grant permissions because that is the component that is causing the issue. Also, there is nothing wrong with the auto configuration because the user can access their own mailbox just fine and
also select mailboxes in their Outlook that were NOT auto mapped.
With that said, here is how I fixed them all.
Remove the permissions using the Exchange Console. Don't forget Send As
Wait about 15 minutes. The mailbox should disappear from the users Outlook
Open an Exchange PowerShell window and run the following command:
.\add-mailboxpermissionsnoautomap.ps1 -Identity mailbox -User user -AccessRights FullAccess
Have the user add the mailbox to their Outlook using the manual process.
All is well....
If you don't have the PS script add-mailboxpermissionsnoautomap.ps1, you can download it. I stumbled across it a few years ago and use it all the time. If you can't find it, just use the Exchange built in command for adding mailbox folder permissions but
specify automap $false.
The idea here is to grant the user access without auto mapping.

Squirrel mail auto response not working

Ok so I read up on all the things online to allow squirrel mail do auto reply's and all that. So I installed everything and got it showing up under filters. Well I setup an autoreply and it's not working. I'm not sure why either. Anyone have any ideas?
-Brian

I checked the mailaccess.log and there is nothing in it. But the mail.log has all kinds of stuff but I'm not seeing anything specific in it for squirrel mail:
stfix/master[66469]: warning: /usr/libexec/postfix/trivial-rewrite: bad command startup -- throttling
Feb 11 12:24:15 xpmedia1 postfix/trivial-rewrite[1439]: fatal: open database /etc/postfix/transport_maps.db: No such file or directory
Feb 11 12:24:16 xpmedia1 postfix/master[66469]: warning: process /usr/libexec/postfix/trivial-rewrite pid 1439 exit status 1
Feb 11 12:24:16 xpmedia1 postfix/master[66469]: warning: /usr/libexec/postfix/trivial-rewrite: bad command startup -- throttling
Feb 11 12:25:16 xpmedia1 postfix/trivial-rewrite[1465]: fatal: open database /etc/postfix/transport_maps.db: No such file or directory
Feb 11 12:25:17 xpmedia1 postfix/master[66469]: warning: process /usr/libexec/postfix/trivial-rewrite pid 1465 exit status 1
Feb 11 12:25:17 xpmedia1 postfix/master[66469]: warning: /usr/libexec/postfix/trivial-rewrite: bad command startup -- throttling
Feb 11 12:26:17 xpmedia1 postfix/trivial-rewrite[1484]: fatal: open database /etc/postfix/transport_maps.db: No such file or directory
Feb 11 12:26:18 xpmedia1 postfix/master[66469]: warning: process /usr/libexec/postfix/trivial-rewrite pid 1484 exit status 1
Feb 11 12:26:18 xpmedia1 postfix/master[66469]: warning: /usr/libexec/postfix/trivial-rewrite: bad command startup -- throttling
Feb 11 13:52:13 xpmedia1 postfix/smtpd[2834]: warning: 206.248.109.32: hostname 32-109-248-206-catv.choicecable.net verification failed: nodename nor servname provided, or not known
Feb 11 13:59:22 xpmedia1 postfix/smtpd[2955]: warning: AOD: Authentication failed for user jsowerby. (Open Directory error: -14090)
Feb 11 13:59:23 xpmedia1 postfix/smtpd[2955]: warning: 71-223-181-16.phnx.qwest.net[71.223.181.16]: SASL PLAIN authentication failed
Feb 11 13:59:33 xpmedia1 postfix/smtpd[2955]: warning: AOD: Authentication failed for user jsowerby. (Open Directory error: -14090)
Feb 11 13:59:33 xpmedia1 postfix/smtpd[2955]: warning: 71-223-181-16.phnx.qwest.net[71.223.181.16]: SASL PLAIN authentication failed
Feb 11 14:15:29 xpmedia1 postfix/smtpd[3127]: warning: 206.248.109.32: hostname 32-109-248-206-catv.choicecable.net verification failed: nodename nor servname provided, or not known
Feb 11 15:53:13 xpmedia1 postfix/smtpd[4321]: warning: 222.170.79.100: hostname 100.79.170.222.broad.dq.hl.dynamic.163data.com.cn verification failed: nodename nor servname provided, or not known
Feb 11 15:54:13 xpmedia1 postfix/smtpd[4321]: warning: 222.170.79.100: hostname 100.79.170.222.broad.dq.hl.dynamic.163data.com.cn verification failed: nodename nor servname provided, or not known
Feb 11 15:55:06 xpmedia1 postfix/smtpd[4322]: warning: 222.170.79.100: hostname 100.79.170.222.broad.dq.hl.dynamic.163data.com.cn verification failed: nodename nor servname provided, or not known
Feb 11 16:52:22 xpmedia1 postfix/smtpd[5092]: warning: AOD: Authentication failed for user rsowerby. (Open Directory error: -14090)
Feb 11 16:52:22 xpmedia1 postfix/smtpd[5092]: warning: host-12-152-82-113.orbitelcom.com[12.152.82.113]: SASL PLAIN authentication failed
Feb 11 16:54:31 xpmedia1 postfix/smtpd[5166]: warning: unknown[216.9.187.105]: SASL LOGIN authentication failed
Feb 11 18:14:48 xpmedia1 postfix/smtpd[5941]: warning: 72.46.148.70: hostname mail.Doyouswearstintingly.com verification failed: nodename nor servname provided, or not known
Feb 11 19:57:18 xpmedia1 postfix/smtpd[6843]: warning: 124.238.20.98: hostname 98.20.238.124.broad.ts.he.dynamic.163data.com.cn verification failed: nodename nor servname provided, or not known
Feb 11 20:35:39 xpmedia1 postfix/smtpd[7104]: warning: 206.248.109.32: hostname 32-109-248-206-catv.choicecable.net verification failed: nodename nor servname provided, or not known
Feb 11 23:47:35 xpmedia1 postfix/smtpd[8963]: warning: 125.44.58.234: hostname hn.kd.ny.adsl verification failed: nodename nor servname provided, or not known
Feb 11 23:48:05: --- last message repeated 2 times ---
Feb 11 23:48:07 xpmedia1 postfix/smtpd[8963]: warning: 125.44.58.234: hostname hn.kd.ny.adsl verification failed: nodename nor servname provided, or not known
Feb 11 23:48:37: --- last message repeated 2 times ---
Feb 12 01:15:21 xpmedia1 postfix/smtpd[9518]: warning: 59.53.166.187: hostname 187.166.53.59.broad.nc.jx.dynamic.163data.com.cn verification failed: nodename nor servname provided, or not known
Feb 12 01:16:21 xpmedia1 postfix/smtpd[9518]: warning: 59.53.166.187: hostname 187.166.53.59.broad.nc.jx.dynamic.163data.com.cn verification failed: nodename nor servname provided, or not known
Feb 12 01:17:11 xpmedia1 postfix/smtpd[9518]: warning: 59.53.166.187: hostname 187.166.53.59.broad.nc.jx.dynamic.163data.com.cn verification failed: nodename nor servname provided, or not known
Feb 12 01:19:22 xpmedia1 postfix/smtpd[9518]: warning: 222.88.125.177: hostname 177.125.88.222.broad.sq.ha.dynamic.163data.com.cn verification failed: nodename nor servname provided, or not known
Feb 12 05:01:31 xpmedia1 postfix/smtpd[10686]: warning: 92.113.83.211: hostname 211-83-113-92.pool.ukrtel.net verification failed: nodename nor servname provided, or not known
Feb 12 05:02:01: --- last message repeated 1 time ---
Feb 12 07:05:25 xpmedia1 postfix/smtpd[11394]: warning: 201.78.158.26: hostname 20178158026.user.veloxzone.com.br verification failed: nodename nor servname provided, or not known
Feb 12 07:05:30 xpmedia1 postfix/smtpd[11394]: warning: 189.71.178.40: hostname 18971178040.user.veloxzone.com.br verification failed: nodename nor servname provided, or not known
Feb 12 07:53:09 xpmedia1 postfix/smtpd[11671]: warning: 206.248.109.32: hostname 32-109-248-206-catv.choicecable.net verification failed: nodename nor servname provided, or not known
Feb 12 07:58:20 xpmedia1 postfix/smtpd[11753]: warning: 86.73.210.195: hostname 195.210.73-86.rev.gaoland.net verification failed: nodename nor servname provided, or not known
Feb 12 07:58:50: --- last message repeated 1 time ---
Feb 12 09:11:35 xpmedia1 postfix/smtpd[12299]: warning: 72.46.148.74: address not listed for hostname mail.Froglegstrailer.com
Feb 12 11:24:56 xpmedia1 postfix/smtpd[14330]: warning: 206.248.109.32: hostname 32-109-248-206-catv.choicecable.net verification failed: nodename nor servname provided, or not known
Feb 12 11:51:32 xpmedia1 postfix/smtpd[14745]: warning: 206.248.109.32: hostname 32-109-248-206-catv.choicecable.net verification failed: nodename nor servname provided, or not known
Feb 12 14:32:10 xpmedia1 postfix/smtpd[16653]: warning: 206.248.109.32: hostname 32-109-248-206-catv.choicecable.net verification failed: nodename nor servname provided, or not known
Feb 12 16:16:29 xpmedia1 postfix/smtpd[18400]: warning: 67.107.97.99: address not listed for hostname inet_gw.amvona.com
Feb 12 19:53:14 xpmedia1 postfix/smtpd[20717]: warning: 98.173.129.238: address not listed for hostname xpmedia.com
Feb 12 19:57:37 xpmedia1 postfix/smtpd[20751]: warning: 98.173.129.238: address not listed for hostname xpmedia.com
Feb 12 20:34:42 xpmedia1 postfix/smtpd[21154]: warning: 69.72.212.182: hostname ecasinobonus.com verification failed: nodename nor servname provided, or not known
Feb 12 20:45:38 xpmedia1 postfix/smtpd[21252]: warning: 190.40.38.237: hostname client-190.40.38.237.speedy.net.pe verification failed: nodename nor servname provided, or not known
Feb 12 21:36:09 xpmedia1 postfix/smtpd[21719]: warning: 66.25.99.2: hostname cs662599-2.bham.res.rr.com verification failed: nodename nor servname provided, or not known
Feb 12 21:38:20 xpmedia1 postfix/smtpd[21728]: warning: unknown[216.9.181.48]: SASL PLAIN authentication failed
Feb 12 23:45:12 xpmedia1 postfix/smtpd[22666]: warning: unknown[216.9.181.48]: SASL PLAIN authentication failed
Feb 13 04:00:09 xpmedia1 postfix/smtpd[24013]: warning: 86.67.10.97: hostname 97.10.67-86.rev.gaoland.net verification failed: nodename nor servname provided, or not known
Feb 13 05:15:31 xpmedia1 postfix/smtpd[24457]: warning: 206.248.109.32: hostname 32-109-248-206-catv.choicecable.net verification failed: nodename nor servname provided, or not known
Feb 13 05:39:21 xpmedia1 postfix/smtpd[24576]: warning: 206.248.109.32: hostname 32-109-248-206-catv.choicecable.net verification failed: nodename nor servname provided, or not known
Feb 13 05:40:47 xpmedia1 postfix/smtpd[24576]: warning: 206.248.109.32: hostname 32-109-248-206-catv.choicecable.net verification failed: nodename nor servname provided, or not known
Feb 13 06:31:56 xpmedia1 postfix/smtpd[24836]: warning: 206.248.109.32: hostname 32-109-248-206-catv.choicecable.net verification failed: nodename nor servname provided, or not known
Feb 13 07:02:43 xpmedia1 postfix/smtpd[25031]: warning: 201.230.27.39: hostname client-201.230.27.39.speedy.net.pe verification failed: nodename nor servname provided, or not known
Feb 13 07:33:31 xpmedia1 postfix/smtpd[25218]: warning: unknown[216.9.181.48]: SASL PLAIN authentication failed
Feb 13 08:12:44 xpmedia1 postfix/smtpd[25483]: warning: 206.248.109.32: hostname 32-109-248-206-catv.choicecable.net verification failed: nodename nor servname provided, or not known
Feb 13 08:21:05 xpmedia1 postfix/smtpd[25554]: warning: 206.248.109.32: hostname 32-109-248-206-catv.choicecable.net verification failed: nodename nor servname provided, or not known
Feb 13 08:45:41 xpmedia1 postfix/smtpd[25819]: warning: 206.248.109.32: hostname 32-109-248-206-catv.choicecable.net verification failed: nodename nor servname provided, or not known
Feb 13 08:47:20 xpmedia1 postfix/smtpd[25819]: warning: 206.248.109.32: hostname 32-109-248-206-catv.choicecable.net verification failed: nodename nor servname provided, or not known
Feb 13 08:49:59 xpmedia1 postfix/smtpd[25819]: warning: 206.248.109.32: hostname 32-109-248-206-catv.choicecable.net verification failed: nodename nor servname provided, or not known
Feb 13 09:02:05 xpmedia1 postfix/smtpd[26074]: warning: 68.225.131.173: address not listed for hostname faithfc.org
Feb 13 09:02:20 xpmedia1 postfix/smtpd[26055]: warning: unknown[66.182.118.39]: SASL PLAIN authentication failed

SCCM 2012 SP1 - OSD Task Sequence - Auto Apply Drivers

I have a basic task sequence created, capture User State, reboot into Windows PE, Apply Operating system, apply Windows Settings, Auto Apply Drivers, Setup Windows and Configuration, Install Applications, Restore User state
The problem I'm having is auto Apply the drivers. My test system is a Dell Opitiplex 3010, with a realtek PCI GBE Family Controller being the only driver added to the driver database.
During the task sequence, I see it down loading the driver, then proceed though the whole sequence. The system restarts and brings up the login. Here is the problem, the network drivers don't install, so the system is still in a workgroup, with no user state
restore.
I repeat the task, this time during the Setup Windows and Configuration, I press F8, and copy the _SMSTaskSequence folder to C:\temp.
Once the task in complete, I see the network drivers saved in _SMSTaskSequence\Drivers & \contentCache. I able to install the network drivers from this location.
What am I missing, why are the network drivers not being setup correctly in Windows 7?
From the \logs\SMST.LOG, I can see the driver being installed correctly, but one the sequence is complete the driver has not been installed.
From the SMSTS.LOG:
Installing driver "Realtek PCI GBE Family Controller" OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Copying "C:\_SMSTaskSequence\ContentCache\BA4B1243-742B-4BFA-8245-89E7B33DE1C5" to "C:\_SMSTaskSequence\drivers\1". OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Successfully installed driver "Realtek PCI GBE Family Controller". OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Entering ReleaseSource() for C:\_SMSTaskSequence\ContentCache\BA4B1243-742B-4BFA-8245-89E7B33DE1C5 OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
reference count 1 for the source C:\_SMSTaskSequence\ContentCache\BA4B1243-742B-4BFA-8245-89E7B33DE1C5 before releasing OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Released the resolved source C:\_SMSTaskSequence\ContentCache\BA4B1243-742B-4BFA-8245-89E7B33DE1C5 OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'Microsoft ACPI-Compliant System'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'Microsoft Basic Render Driver'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'Intel(R) 82802 Firmware Hub Device'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'Generic volume'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'ACPI Fixed Feature Button'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'HID-compliant mouse'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'Motherboard resources'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'CD-ROM Drive'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'USB Root Hub'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'System timer'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'Generic USB Hub'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'USB Input Device'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'ACPI Power Button'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'High Definition Audio Controller'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'Motherboard resources'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'Microsoft System Management BIOS Driver'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'Intel Processor'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'Intel Processor'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'Intel Processor'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'Intel Processor'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'PCI Simple Communications Controller'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'HID Keyboard Device'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'Generic volume'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'Generic Monitor'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Failed to find a suitable device driver for device 'USB Input Device'. OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Exiting with return code 0x00000000 OSDDriverClient 3/21/2014 5:52:37 PM 900 (0x0384)
Process completed with exit code 0 TSManager 3/21/2014 5:52:37 PM 1300 (0x0514)
!--------------------------------------------------------------------------------------------! TSManager 3/21/2014 5:52:37 PM 1300 (0x0514)
Successfully completed the action (Auto Apply Drivers) with the exit win32 code 0 TSManager 3/21/2014 5:52:37 PM 1300 (0x0514)

Yes, I open a dos box during the Windows Setup, xcopy SMSTaskSequence to C:\temp
Then once Windows install is completed, I login to the local Admin account(only thing available), device manager and install the network driver from C:\temp\SMSTaskSequence\drivers\1
From Earlier in Setupact.log:
   PnPIBS: C:\_SMSTaskSequence\drivers is listed as a driver path in unattend.xml ...
2014-03-25 12:27:22, Info                         PnPIBS: Found the file rt64win7.inf
2014-03-25 12:27:22, Info                         PnPIBS: Added driver C:\_SMSTaskSequence\drivers\1\rt64win7.inf to the list of drivers.

Drivers - Can you do both "Apply Driver Package" and "Auto Apply Device Drivers - PNP" in the same Task Seqeunce ?

Hi All,
It has been mentioned to be that it is possible to have both "Apply Driver Package" and "Auto Apply Device Drivers - PNP' " specified in the same task sequence, with some kind of logic specified that if the Apply Driver Package step does
not run due to the hardware wmi query not being valid then the 'Apply Device Drivers -PNP' will run instead. Vice-versa - if the "Apply Driver Package" wmi query is correct and driver package applied then the 'Auto Apply Device Drivers -PNP'
will not run and be skipped.
Is this possible ?
I can't seem to find any documentation or reference indication this can be done. :-(
Many thanks everyone..

To add some info here, note that the end result of both tasks is the same. Neither actually *installs* drivers in any way. Both simply copy the drivers to the target system and inject them into the image being deployed where they are then available to Windows
Setup (which runs during the Setup Windows and ConfigMgr task) to install based upon the Windows Setup standard PNP detection.
Thus, using both task types, depending upon what is in the driver packages and what is detected by the OSD PNP detection (which differs slightly from the OS PNP which is far more complex and has been described as a "black art"), potentially injects
more drivers into the image potentially making more drivers available to Windows Setup. This could of course increase your deployment time.
I've thought about this approach before and it is technically valid, but I've never had to resort to it. I've always just made sure that the drivers packages are complete. If you're trying to address the scenario of hardware without a explicit driver package,
I could see it working but I could also see it causing problems because drivers are weird. In general, I would recommend always testing new hardware and anything not accounted for is considered unsupported.
Jason | http://blog.configmgrftw.com | @jasonsandys

Boot Camp drivers don't always load (for Windows 7)?

Recently, I backed up my Windows 7 Boot Camp partition with Carbon Copy Cleaner before realizing that it would not be a bootable backup. Well, after some fiddling around, I made it bootable again (with the help of iPartition) and it generally works well.
However, for some reason, sometimes when I boot into Windows 7, it appears that some drivers don't work properly about half the time. For instance, if I load a game, the game will not be full screen and will instead be the exact dimensions that is specified (my display is 1920 x 1080; if the game is set to 1280 x 720, then it won't stretch to full screen but instead appear at that size). As I said, this happens about half the time.
Also, I use MacDrive so I can write to Mac partitions, and when these display problems occur, then MacDrive will also show an error saying that it needs to be repaired.
All of this can be fixed with a restart, but after restarting, my two displays will be duplicated instead of extended.
It appears that the display drivers (and perhaps a few things, related to MacDrive) don't seem to be loading properly at all times? For some reason, I can seem to fix this if, when in Mac, I quit all applications first before booting up Boot Camp. I don't know how they could be related, but it so far seems that way.

Have a read here Installing Windows 7 drivers on MacBook Air (Late 2010)
Stefan

OSD Drivers don't seem to be auto applying..not sure why

Similar Messages

Maybe you are looking for