OSX Hang Issue

OSX appears to cause the application to "hang" if it is minimized for too long or sits in the background too long. It appears the system or AIR framework is placing the application into an idle state. Once you bring the application back to focus, it catches up and works fine. I am able to reproduce this on all version of Adobe AIR. Our application is a real-time application that requires constant connection. We've been able to find a work around where in some instances, simply playing a blank mp3 over and over causes the application to remain active.
I've created a bug case.
https://bugbase.adobe.com/index.cfm?event=bug&id=3746380

hi i have been having exactly the same problem as you. same exact message. it has happened 4 times now to me, a couple times i was watching a video file and the other 2 times i was on itunes. on all 4 times, i had azureus (a bit torrent client that downloads files) running in the background? did you have anything similar? i also have been running leopard. let me know thank

Similar Messages

Cisco NAC server hang issue

Hi All Cisco NAC Experts, I am currently experiencing a Cisco NAC NAC3315-SVR hang issue.
The issue was already happened for few time on the same server and the symptom when NAC server hung includes no response to ICMP ping, no response to SSH request, no response for access request to CAS management page via https, HA pair was detected down from its HA neighbor and triggered failover to secondary CAS.
The CAS server was recovered after manually power cycle the hardware.
After went through the attachment CAS logs, I found all the services and logging service were stopped when the issue happening but unfortunately there is no any suspicious activity was logged down before or during the issue happening.
I have also tried to search on Cisco Bug Toolkit but no similar case was found, I believe it was not caused by software bug due to the software version 4.8.1 is running in my company for years and only one CAS server having the issue.
That will be great if any one can help me out for the same.
Thanks,
Eric

Hi Bro
This could be a problem with the certificate in that Cisco NAC appliance itself. My suggestion is to redo the certificate generation between the CAS CAM and CA Server. If this still doesn’t work, it could also be due to overload/broadcast storm on the LAN portion. This can be verified via Wireshark.
If all else fail, then a hardware swap would seem like the next best thing.

How to resolve hang issue in Iphone 4s with IOS 7

how to resolve hang issue in Iphone 4s with IOS 7

Hi there ECMA IPHONE,
The article linked below provides a lot of great information and troubleshooting tips that will most likely help you resolve the issue sending emails from the specific email account on your iPhone 4s.
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Ciao,
-Jason

Nokia 301 RM-839 v9.04 hanging issue.

Hello,
I have observed hanging issue while we take photo using camera. Instead of saving & showing options it show image taken preview. Keyboard also hangs. Only way is to stop camera or restart removing battery.
Has anyone seen such issue? Any clue?
Kindly Suggest.
Thanks,

occasionally phones can receive "updates", where the actual SW version remains the same. Usually this means just some very minor tweaks to e.g. operator settings or similar things. So hardly anything noticeable.
http://www.microsoft.com/en/mobile/nokia-x-updates/
http://www.microsoft.com/en/mobile/nokia-x2-update/
http://www.microsoft.com/en/mobile/asha-software-update/
http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
https://twitter.com/LumiaSWUpdates

Excel 2007 "Hang" issue when copy/pasting.

Hi.
I have a user, using terminal services from a HP thin client. The server is a Windows server 2008 R2 SP1, Office 2007 SP3. The user is trying to copy from a IBM access session into Excel, sometimes the Excel will hang, an needs to be forcefully closed down
using the Task Manager. I have made sure that the IBS Access is using the clipboard function on the server. Other users can copy/paste from this program without any issues. The server is fully updated and the office pack also.
Any suggestions on where to start?
Regards Martin

Hi Martin,
Thank you for posting in Windows Server Forum.
Thus from your description it seems that particular user is facing the hangs issue, please correct me if there is anything misunderstand from my side.
Does this happens for all Excel file with that user?
Please try with RDP 8.1 for user and check the result. Please check the network connectivity is good. As user is copy pasting from IBM session it can create a little delay with file size or corrupt Excel file. The issue might also appear because the size for
Excel sheet would be very high and thus during the logon time it will take a long time to open. Also it may take into hang issue for the users. In addition also check below link for information.
What can cause slow copy and paste in Excel?
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2011/09/08/what-can-cause-slow-copy-and-paste-in-excel.aspx
Hope it helps!
Thanks,
Dharmesh

Undetectable / Irreparable File corruption problems lead to OSX hanging

Hi,
I have a Samsung 500Gb 5400rp disk in my MBP17 ( 2007 ).
Certain files appear to be corrupted.. ie. you try to open them and the whole Mac freezes for 30-40 seconds.
Disk Utility cannot detect a problem, nor can Diskwarrior. I've tried repairing permissions, repair disk, rebuild HFS directory, scan files for problems.. these erroneous files don't get detected at all.
Just try to open one and Finder/OSX hangs for ages. File copy programs just hang for ages including Migration Assistant, Finder Copy.
So migrating from my MBP17 to my new i7 MBP17 doesn't work at all due to these "ghost" file.
Appreciate any suggestions for how to get my files across to my new MBP.

Delete the corrupt files before migrating.

CF Builder2 hanging issues

We recently started installing CF Builder2 on developer machines, and almost all of them are reporting serious hanging issues with the computers locking up.
Has anyone experinced/experiencing this problem?

Yes, @umuayo, there can be many explanations for CFB hanging. I discuss a few here, but more than just pot-shot guesses, I also offer some specific diagnostic steps you can take to hopefully find and resolve such problems.
One common cause I recall hearing is when you have your CFB project set to look at files on a share (rather than on a local drive to CFB).
Consider that CFB is doing a lot more than just “editing a file”. It’s doing syntax checking on the fly, it’s looking up methods in CFCs, files you can include, tables and columns in databases as you type SQL, and all manner of other helpful operations…all of which can be expensive for it to figure out depending on your configuration.
There are also some operations that are done either on startup, or on certain other operations you may do only once in a while.
So when you say it hangs up, when does it do so? At startup? After some period of time? On doing some particular operation? And of those may help you narrow down the cause.
One helpful tip is to open the Progress View in CFBuilder (Window > Show View > Other ). That shows background tasks that are run when you do various things within builder, especially communications going on back and forth between CFB and any server you may have it talking to. If you have that view open all the time (best viewed at the bottom of the window to be wide), you may see what it was starting to do when things hung up.
Still another common problem is that people find that the problem is that the JVM (within CFBuilder) is running out of heap. Just as CF can hang and crash when that happens, so too can CFB (independent of CF, of course.) You can tweak the max heap size (xmx argument) in the startup properties for CFB. If you’re using the standalone edition (versus running CFB as a plugin), you’d tweak the cfbuilder.ini file in the directory where CFBuilder is installed. If you’re running as a plugin, I’d recommend you research how to change the JVM args based on your OS, version of Eclipse, how you start it, etc.
Also related to memory, you can also set CFB (and Eclipse) to show you a heap size use indicator (and even request a GC), with the feature that appears at the bottom of the editor window when you go to Preferences>General then click Show heap status.
Similar to the above, but different, another thing people have found is a problem on 64-bit Windows, which is resolved with another simple change in the startup args (changing it from using javaw.exe to using jvm.dll for the jvm). For more on that, see these two blogs: http://www.websolete.com/posts/cfbuilder-2-performance-problems-on-windows-7-64-bit-solved and http://www.coldfusionmuse.com/index.cfm/2012/1/27/cfbuilder-performance-64bit-plugin.
Finally, and perhaps the easiest thing to consider: you mention being on “CFBuilder 2”. You don’t clarify if that’s really 2.0 or 2.0.1, the free update that came out at the same time as CF10. That has various performance fixes, listed in a section at <http://www.adobe.com/devnet/coldfusion/articles/cfbuilder201-whatsnew.html> http://www.adobe.com/devnet/coldfusion/articles/cfbuilder201-whatsnew.html, including a mention of some features that can have a performance impact that you may want to watch out for.
Also, if you are still on CFB 2.0 and choose to remain there for some reason, there was a hotfix for that, <http://www.adobe.com/support/coldfusion/downloads_updates.html#cfb2> http://www.adobe.com/support/coldfusion/downloads_updates.html#cfb2.
Hope that helps. Let me know what you think.
/charlie
PS there are a few blog entries out that address CFBuilder performance. If for some reason the above don’t help, consider these as well, though do note that some could be from the CFB1 or CFB2.0 era and may not be as relevant for CFB2.0.1:
http://www.rupeshk.org/blog/index.php/2010/05/cfbuilder-tip-tailview-can-kill-server-perfo rmance/
http://www.ravenglass.com/blog/index.cfm/2012/7/2/Fixing-CFBuilders-sometimes-slow-and-unr esponsive-behavior
http://blog.mxunit.org/2009/07/speeding-up-coldfusion-builder.html
http://blog.mxunit.org/2008/12/speeding-up-eclipse.html
http://www.thoughtdelimited.org/thoughts/post.cfm/improving-coldfusion-builder-performance -temporarily-when-editing-large-files
https://docs.google.com/document/pub?id=1bBja77ShTkWDQJROzQbAUIs8YO3WSuQOaduuC15WtrA
http://cfmumbojumbo.com/cf/index.cfm/coding/increase-cfbuilder-performance/

Solved Mac Mini (late 2010) Blue Screen Hang issue

I posted several questions about blue screen hang and was able to fix my problem, after LOTS of work and searching in various forums.
I had been unable to use my computer for over a month; it was simply hanging at the blue screen, and that seemed to happen when my Finder.app had crashed, hiding all my document icons on my desktop, etc. I also had been having issues with Time Capsule and my backup Iomega disk, which is touchy.
When I tried a fix my icons had returned but I had been unable to use computer after rebooting, and I had tried every sort of key combo including trying to boot from the original install CD, etc., but nothing worked. I could not even reboot using original 10.6 software CDs, and was only able to log in Single User Mode and had tried many fixes with Terminal, and finally, this worked, two of the fixes I used are listed below.
It seems, in part, that resetting certain "privileges" worked.
This tip first tip is for Mac OSX 10.3 to 10.3.9 and even though I am on 10.6.8, I ran it, and it worked. THis is the original link location: http://support.apple.com/kb/TS1411
   1. Start up the computer in Single-User Mode.
   2. Type: in Terminal the command
     mount -uw /
   3. Press Return.
   4. Type (in Terminal, note space before mv)
      mv /Library/Preferences/com.apple.loginwindow.plist preferences2.old
     Note space between ".plist" and "preferences".
   5. Press Return.
   6. Type:
     mv /Library/Preferences/com.apple.windowserver.plist preferences3.old
   7. Press Return.
   8. Type: reboot
   9. Press Return.
Then I followed up with this tip to "Reset certain privileges"
1. Start up the computer in Single-User Mode.
   2. Check the volume with fsck.
   3. Type: mount -uw /
   4. Press Return.
   5. Type: chmod 1775 /
   6. Press Return.
   7. Type: reboot
   8. Press Return.
When I rebooted, yayyyy! I was able to log back onto my computer, however, all icons were missing, again, so I typed this fix
/System/Library/CoreServices/Finder.app/Contents/MacOS/Finder & disown
I am not sure what 1775 means, but this fix got my computer back up, saving me at least a $150 bill at the Genius Bar.
When I typed those commands into Terminal, this is what returned, and seems to be some QXPscrpiting issue, though I have no idea what that is. and again, some Dropbox issues. If anyone has any idea what all those issues are regarding ScriptingCodes please let me know.
My-Mac-mini:~ username$ /System/Library/CoreServices/Finder.app/Contents/MacOSFinder &
[1] 892
Rangdrols-Mac-mini:~ username$ -bash: /System/Library/CoreServices/Finder.app/Contents/MacOSFinder: No such file or directory
[1]+ Exit 127                /System/Library/CoreServices/Finder.app/Contents/MacOSFinder
My-Mac-mini:~ username$
Rangdrols-Mac-mini:~ username$ /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder & disown
[1] 894
My-Mac-mini:~ username$ 2012-08-25 19:37:10.594 Finder[894:903] Error loading /Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QXPScript ingAdditions: dlopen(/Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QX PScriptingAdditions, 262): no suitable image found. Did find:
    /Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QXPScript ingAdditions: no matching architecture in universal wrapper
Finder: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/QXPScriptingAdditions.osax" declares no loadable handlers.
Dropbox: Entered INJECT_pthread_entry
Dropbox: Installing event loop timer
Dropbox: proc: 0x11d171e53
Dropbox: upp: 0x11d171e53
Dropbox: InstallEventLoopTimer: 0x101341dd8
Dropbox: GetMainEventLoop: 0x101341c41
Dropbox: timer installed!
Dropbox: Loading /Library/DropboxHelperTools/Dropbox_u501/DropboxBundle.bundle/Contents/MacOS/Dr opboxBundle
Dropbox: dlopen returned: 0x11bb12090
module initializer in main thread?: 1

Great work, thanks.
As far as those errors, ypu have some missing OS components it seems.
And, before the mount -uw you really should've done this...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214

OSX hangs during boot or install

Hello all,
I'm writing this because I'm not really sure where else to post this at to get an indepth answer. Currently I have a dual G4 450mhz AGP PowerMac that I bought used. When I purchased it, it had 768mb of ram and the only thing it didn't have was a working hard drive. After putting in a new hard drive the system worked great when i intially installed OS9 and later OSX for fun.
However I had to remove the 768mb of RAM because a client PC needed it and that took priority over my dual G4 at the time. Just the other week I purchased 2 x 256mb of RAM from Omni Technologies (omnitechnologies.biz) which guarantees working ram for specified Apple systems.
Upon receiving that ram and installing it, I powered on the G4 only to find it would "hang" when booting OSX (10.3.9). The symptoms are as follows: When powering on I hear the normal chime and the white screen with gray apple logo appears. Seconds later the spinning progress indicator shows up spinning in circles as OSX is booting. However after about 5 minutes with no DVD/hdd activitity, the system then hangs. The gray apple logo changes to a gray 'prohibited' logo. It's the logo of the circle with the slash through it. Like the kind you see over no-smoking signs.
I figured the hard drive was messed up and I decided to reinstall OSX cleanly. However when I booted from the CD by pressing 'c', the EXACT SAME symptoms above happened. It was at this point I started getting really worried. So I decided to remove the hard drive temporarily and boot from the CD just to make sure it really was booting from the CD. Unfortunately the exact same symptoms happened.
Out of desperation to make sure that my hardware was OK, I decided to install OS 9.2.1 which installed and WORKED perfectly. I also installed UbuntuPPC and Slackintosh versions of linux which also installed and worked perfectly.
The issue appears to reside with OSX. I've borrowed friends cd's of 10.2-10.3 and all of them will NOT install. They start to boot from the CD, but never even make it to the first window.
Help!!
Brad

Actually trying one stick in each individual slot was one of the first things I did. Unfortunately that did not provide a resolution for me.
Thanks for the links regarding the broken folder/prohibitory sign. I read those and they made mention of resetting the nvram and pram. I just did that a bit earlier today but logging into the open firmware by pressing Option-Command-F-O and typing: reset-nvram; set-defaults; reset-all.
Upon the reboot and after I plugged the hdd with OSX on it back into the system, the resolution was a bit off as I figured. But this time there was no progress indicator. Instead only the gray apple logo showed and there was no response from the hdd or cdrom drive.
I also noticed that the USB mouses red light went out within the first 45 seconds of booting. I swapped out keyboards and mice and the new ones did the same thing as well. I also tested the memory in an imac I have and OSX that is installed ont heimac works gerat with that stick of memory. I'm leaning towards the fact that the memory I have is fine, being that it was ordered from a company that specifically guaranteed it to work on macs of all kinds.
Any other thoughts or ideas?

OSX hangs when booting + monitor woes

Firstly, the internal monitor on my MacBook Pro refused to turn on when the computer booted - chime sounded on boot and the computer responded to keyboard input. I managed to fix the monitor by using my iMac as an external display, then shutting down and yanking out the video cable - now the internal monitor works! I'm glad its working, but does anyone have any insight into what went wrong? It seems really strange and I wan't to avoid it hapening again.
Secondly, I now have another serious problem. OSX refuses to boot.
I've started the computer in verbose mode and this was the result:
http://benanderson.homeip.net/uploads/phpG9ptPf.jpg
** /dev/rdisk02 (NO WRITE)
** Root file system
Executing fsck_hfs (version diskdev_cads-540.1-34)
I verified the start up disk and its permissions from a Lion install DVD and it passed them with flying colours. I restarted the computer in Safe Mode, but even when booting in safe mode it hangs. Progress bar gets to about 1/3 of the way and then stops. http://benanderson.homeip.net/uploads/phpA7jg8J.jpg
I know fsck is file system check, but its been 10minutes and it hasn't budged from that spot. I'll leave it running for an hour or so (I know checking a disk can take a while if its a serious issue), but does anyone have any solutions that don't require me erasing the disk in the event the OS really has gone caput?
Lastly - what would have caused this? The last time I used the computer was the day before yesterday and there were no signs of error. I turned it on today and then all this happened. Fluke? Bad blocks? I'm just concerned because this computer is less than a year old - and to have something like this happen is quite worrisome.
Thank You!

You will hang on "setting default..." if you are are trying to mount NFS filesystems in your /etc/vfstab and you cannot reach the server where these filesystems reside. You can "boot -s" and comment out these filesystems in your vfstab so you can boot or you can resolve why you can't reach the server where the filesystems reside. Metainit pertains to DiskSuite. You may have used DiskSuite to create metadevices.

Mail Setup at OSX Server issues

I have several devices (iPad, iPhone, Desktop and Laptop) that access my email accounts (Personal-POP and Business-IMAP accounts) without any issues.
I'd like to use my Mac Mini OSX Server as a main client to all these emails account and collect emails and distribute it at my local network.
Is it possible? I'd like to use all resources from my ISP that can handle with virus, security ... but at the same time I'd like to keep local at this OSX Server all messages that we usually send and receive when we are using local network at office. I read manual several times but is not clear for me if this feature is available.
All suggestions will be welcome.
Edison

OS X Server and most mail servers do not include the ability to collect mail from remote servers, though it is possible to build a somewhat precarious scheme based on forwarding messages from the remote servers involved. Google's mail service and its gmail client do have the ability to retrieve mail from other remote mail servers without resorting to forwarding mail around, but you'd need to integrate something like imapsync or fetchmail to perform this on OS X Server. (Related — my old replies to related questions here in the forums will often mention imapsync, as well.)
In general when running a mail server that's accessible to the Internet, you'll need DNS and also static (fixed) IP from your provider for OS X Server and this is the preferred and most reliable means, this if if you want to send outbound mail through the server, or you'll need to relay your inbound and outbound mail through one of the relay services providers. Static IP and proper DNS can also be a factor when receiving mail from some of the more cautious mail servers around. Failing to have IP and DNS correct mails mail sent from your server can be dropped, and sometimes mail sent to your server will be dropped before being passed to your server.
OS X Server does include some spam- and malware-related capabilities and various Postfix, Amavis, ClamAV and related pieces to keep a lid on most typical spam shenanigans, though you might want additional services or the replacement of the OS X Server mail server with the mail package from Kerio.

E 72 Hang issue, battery discharging, Keys wrongly...

I am a customer of Nokia India. I bought a Nokia E 72 handset on 21 March 2010.
After few months there are continuous problems with the handset, several times it has been formatted by Nokia Care centers.
Store ID: 212_433527
Date of Purchase of handset: 21/3/2010
Nokia Care Protect package, Registration no: 30682000790413. Date: 12/03/2011, Warranty Ref No: GLBINY510844832
Current reference no of complaint job sheet: 212433527/110331/27 ; Date: 31/March
Case History
From june 2010, the handset is encountering continuous problems like low battery, keypad not working properly, it hangs on, phone book not responding etc.
For battery issues I submitted the handset, and service centre guys formatted it, but issue never got resolved.
I gave the handset on repair to Nokia care, the guys said it is not repairable here in Udaipur and will go to Delhi.
It took 25 days to get handset back, and I was unaware that Nokia provides a loaner handset and no one from service centre told me that.
When I got my handset back in mid February 2011, the problems still prevailed and I gave it back to Nokia care. This time it took 15 more days
to get back the set. I got a swap in third week of March 2011, after using the swap for 1 week, there were some issues of Board related errors.
I gave back the swap on 31 march.
Now it has been 13 days I do not have a handset I bought for RS. 18,500/- and I have a mismanaged life because of this device issues from past 3 months now.
I am facing severe issues on my business front from January 2011. Some times I lost all my contacts, meetings, emails and so on and on and on.
Nokia says “SUCCESS DOES NOT NEEDS A DESK”-IF YOU KEEP OUR DEVICE WITH YOU FOR 3 MONTHS, SUCCESS WILL NOT WAIT FOR US.
The Nokia care centre is hopeless and helpless. It is RAMA Telecom, Udaipur (Rajasthan).
I request you to kindly provide me with a brand new NOKIA E 72 handset as soon as possible. I am very much frustrated with the delay and problems in relation to this handset has become intolerable for me.
Please look into the matter as soon as possible for you, I do not want someone else’s used handsets for a swap deal with your company. I need my original handset or a brand new handset.
MODERATOR'S NOTE: We have edited your post. Please refrain from posting your IMEI for confidentiality and security purpose.

Hello
you opened a case at our support portal. That is the right way to get support for such very specific issues.
Thanks
Josef

Weird OSX display issues after going to webpage, only thing that fixes is Perm repair

I have a bizarre issue that i'd love some input on. Late 2009 iMac, Mountain Lion (then Mavericks).
I use Firefox to utilize a real estate website (Fusion MLS) for several months now. A couple of days ago, after i would log into the website and use it for a little bit, the rest of my tabs, apps, windows, would all start appearing as black boxes, or have glitched out (generally black) screen display issues. To be clear, other tabs inside the browser would be black, or partially black, and also the right half of my taskbar icons would be black silhouettes of the icon. BUT, the Fusion MLS website would still work fine. Closing the page, etc, would not fix the problem, it would be stuck like that no matter what i closed or opened, computer would function fine except for the display, but i couldnt see hardly any of the apps so I'd have to shutdown, but a simple reboot didnt fix it. After an hour of troubleshooting, I started off in Mountain Lion when the problem appeared, and in the process of troubleshooting I decided to upgrade to Mavericks to see if that would fix the problem, it didnt. Ultimately I discovered the only thing that fixes the problem is to boot into Safe Mode and Repair Permissions, then i can come back in as normal and everything is normal again (a standard reboot doesnt fix it, when logging back into OSX it would still have black silhouettes and all the app windows would be black).
So after the above I decided to just start using a different browser to go to this Fusion MLS website (Safari). Which worked fine for a day, but now when i go to the website, i have no problems, but when i put the computer to sleep, and bring it back, the windows are blacked out and icons silhouetted. So back to safe mode, repair perms, and then it works again. When i do the repair perms, there are usually no verbose things that it says it repairs, sometimes it says something about the PrinterList being 0 instead of 80, but thats it.
Any help or insight would be greatly appreciated, I'm completely dumbfounded....

Now regular Repair Perms doesnt fix it, it has to be Diskwarriors Repair Perms. Also it happens anytime the computer is put to sleep for a length of time and brought back, regardless of whether the Fusion MLS website was gone to.

HANGING Issues with PS, ID, & AI! keeps crashing my whole system.

I spent $500 at an Apple recommended shop. Brought it back twice, Still no luck.
Anybody else havoing these issues?

Does the whole machine shut down, reboot, or hang?
Do you get an Apple message about a system error (aka kernel panic) when the machine restarts?
If either of those happens, you're probably looking at defective hardware in your system.
And no, most people are not seeing such problems.

Oracle 10g Application Hang Issue ...... Please need Urgent Help

Hello All,
We have Linux server with Oracle Application 10g and Oracle 11g database.
We have developed an application with JSP/Servlet. We are facing an wired issue with this application.
When we start using system with 4-3 users at a time, after few mins or few hours, that application slow down or hang.
and then after we are not even able to get a simple HTML page. It also affect the other applications as well, which are deployed on that server.
We have tried our best but not able to find what the exact problem is. Even we have used visualVM and Jconsole to monitor the application.
When application hang, we had found that there were 6,959 Loaded Classes, 200MB heap size, CPU usage 20%.
We have set the heap size to 2GB.
Another thing is, some procedures take 20sec to 2min to execute. But does this affect the application such a way that it goes hang?
Please help to found out the problem.
Thanks,
Ankur Raiyani

Hello,
I have a simple question.
If any procedure takes 40 - 45 sec to execute then will that affect the Oracle Application server and make all the deployed instance slow?
Please help me out
Thanks in advance ......
Ankur Raiyani

OSX Hang Issue

Similar Messages

Maybe you are looking for