OUI-10094

I am trying to install 10g on solaris 64 bit which already has oracle 9i.However it errord out with "OUI-10094:Problem in saving inventory. Installation cannot continue. /va
r/opt/oracle/oraInventory/ContentsXML/comps.xml (Permission denied)"
It was because of permission issue with comps.xml.Now that i have given the correct permissions, i want to know can i run the runinstaller again and install it in same home i did earliar or do i need to clean my earlier installation.
Thanks

Here is the solution->after giving correct permissions to inventory...
remove the line
<HOME NAME="OraDb10g_home1" LOC="/u02/fatstdb/10g" TYPE="O" IDX="3"/>
in the inventory.xml of central inventory
Clean the installed directory-files and just start run installer

Similar Messages

OUI-10094 : problem in saving inventory

Hi friends,
My environment is RHEL4 ,db 10g, i have copied a oracle home from other instance and unzipped on target machine and ran
$ORACLE_HOME/oui/bin/runInstaller -silent -clone ORACLE_HOME="/u01/app/oracle/product/10.2.0/db_1" ORACLE_HOME_NAME="db_1"
it errored out with message OUI-10094:problem saving inventory /etc/oraInventory/ContentXML/comps.xml (permission denied)
here my doubt is that i have 2 more oracle homes on the machine 8.0.6 and 9.2.0, if i give permissions to comps.xml file will it effect other dbs running on same machine.
Please give some hint.
Thanks
Raghu
Edited by: RBandla on Dec 23, 2009 1:36 PM

Hi,
here my doubt is that i have 2 more oracle homes on the machine 8.0.6 and 9.2.0, if i give permissions to comps.xml file will it effect other dbs running on same machine.This should not affect other installations, so it should be safe to give permission on the xml file.
For the OUI-10094 error, search "My Oracle Support" website, you will get couple of hits which should be helpful.
Regards,
Hussein

Upgrade of DB failed

Dear all,
am upgrading my oracle DB 11.5.10.2 database 9iR2 to 10g R2..
tried to install the oracle 10g home..
changed the access to /etc/oraInventory as chmod -R 777 /etc/oraInventory
while runnin the OUI, at 90%, got the following error :
OUI-10094:Problem in saving inventory. Installation cannot continue.
/d02/oracle/appl10g/prodora/iAS/inventory/ContentsXML
where the above ias inventory is the existing Oracle 9i (EBS ). ..
[root@oracle ContentsXML]# cat /etc/oraInst.loc
inventory_loc=/etc/oraInventory
inst_group=dba
dba is the group assigned to the user for installing oracle10g software.. oracle 9i and 10g users are the same.
Any ideas ?
Thanks
yusuf

Yusuf,
Have a look at Note: 363266.1 - Installation of 10g fails with OUI-10094:Problem in saving inventory
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=363266.1

OraInventory error

Hi
when i am going to install 10g on Oracle LINUX enterprise edition
I got an error
OUI-10094 problem in saving oraIneventory
Neo

Another problem may be space issue with the disk that oraInventory resides on.

ODT Installation problem with OUI

Good afternoon,
I also posted this in the Database Installation forum.
I am not as familiar with Oracle as I would like to be, so I will be as specific as possible. Thanks in advance for your time.
I am on a Windows 2003 server with Oracle 9204 installed. I downloaded ODTwithODAC10202.exe from Oracle and ran it. It unzipped files to C:\. This created the "install" and "stage" folders.
I ran C:\install\setup.exe file. A command window appears with the following text:
=============
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 4.0, 5.0, 5.1,
l 5.2 Passed
Checking monitor: must be configured to display at least 2
256 . Actual 65536 Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from C:\DOCUME~1\!Admin\LOCALS~1\1\OraInstall2006-10-04_12-52-03PM. Please wait ...
================
At this point the command window disappears every time.
In an effort to troubleshoot, I navigated to the file path indicated in the output. I find the OraInstall2006-10-04_12-52-03PM folder. Within this folder are 3 subfolders:
[diagnostics]
[jre]
[oui]
So I drilled into the oui/bin folder and double click setup.exe. I get an error message stating:
Oracle Universal Installer
The Java RunTime Environment was not found at C:\DOCUME~1\!Admin\LOCALS~1\Temp\1\OraInstall2006-10-04_12-52-03PM\jre\bin\javaw.exe. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
OK
Okay so I looked at that error closely and noticed that it's pointing to the wrong path. Note the "jre" folder I mentioned (part of the 3 subfolders) earlier. I looked in the "jre" folder and there is a "1.4.2" folder BEFORE the bin folder. So javaw.exe is actually in OraInstall2006-10-04_12-52-03PM\jre\1.4.2\bin\javaw.exe and not in jre\bin, which seems to have caused the error above.
I cannot figure out how to fix this. A new OraInstall2006-10-04_12-52-03PM folder is created everytime I try to run the main install file. I am not sure this is even the problem but it seems plausible.
On a side note, i tried the -J-Dsun.noddraw=true switch that seemed to be the solution to other disappearing OUI windows. But that didn't work. I really think the issue seems to be in the wrong path reference.
Thanks for your help.

I fixed the problem by creating a local administrator account, logging in as that user, and then installing the product.
I read one sentence on the hundreds of web pages I have looked at concerning this problem that said maybe domain level administrator accounts are the problem. The local seemed to fix it.

ERR Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install

==============>deploy log information:
2015-04-27_14-50-42:INFO:Install Args AGENT_PORT=3872
2015-04-27_14-50-42:INFO:Action description 在主机 expquery03 上执行命令 /bin/sh -c '/u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/agentDeploy.sh -ignorePrereqs ORACLE_HOSTNAME=expquery03 AGENT_BASE_DIR=/u01/app/agent_12c OMS_HOST=oragc12c.yto.net.cn EM_UPLOAD_PORT=4903 AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst b_doDiscovery=false b_startAgent=false b_forceInstCheck=true AGENT_PORT=3872'
2015-04-27_14-50-42:INFO:Attempt :1 pty required false with no inputs
2015-04-27_15-11-47:INFO:/bin/sh -c '/u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/agentDeploy.sh -ignorePrereqs ORACLE_HOSTNAME=expquery03 AGENT_BASE_DIR=/u01/app/agent_12c OMS_HOST=oragc12c.yto.net.cn EM_UPLOAD_PORT=4903 AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst b_doDiscovery=false b_startAgent=false b_forceInstCheck=true AGENT_PORT=3872' execution failed on host expquery03
2015-04-27_15-11-47:INFO:Pattern ERROR: found in file /opt/app/oem12c/gc_inst/em/EMGC_OMS1/sysman/agentpush/2015-04-27_14-18-30-PM/logs/expquery03/install.log Line ERROR: Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
2015-04-27_15-11-47:INFO:Error Message found Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
2015-04-27_15-11-47:INFO: ACTION 在主机 expquery03 上执行命令 /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/agentDeploy.sh -ignorePrereqs ORACLE_HOSTNAME=expquery03 AGENT_BASE_DIR=/u01/app/agent_12c OMS_HOST=oragc12c.yto.net.cn EM_UPLOAD_PORT=4903 AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst b_doDiscovery=false b_startAgent=false b_forceInstCheck=true AGENT_PORT=3872
2015-04-27_15-11-47:INFO: OUT null
2015-04-27_15-11-47:INFO: ERR Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
2015-04-27_15-11-47:INFO: EXIT CODE1
2015-04-27_15-11-47:INFO:InvocationTargetException Exception
2015-04-27_15-11-47:INFO:Printing Exception :java.lang.reflect.InvocationTargetException
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at oracle.sysman.core.agentpush.ui.deployer.BaseDeployerOps.executeActions(BaseDeployerOps.java:1924)
        at oracle.sysman.core.agentpush.ui.deployer.NewAgentDeployer.deploy(NewAgentDeployer.java:59)
        at oracle.sysman.core.agentpush.ui.deployfwk.DeploymentWorker.run(DeploymentWorker.java:26)
        at oracle.sysman.util.threadPoolManager.WorkerThread.run(Worker.java:311)
Caused by: CommandException: err: Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install. out: null exitcode: 1
stacktrace:
null
        at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCommandOnNodeInteractive(DeployerOps.java:1204)
        at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCommandOnNodeInteractive(DeployerOps.java:1050)
        at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCmdOnNode(DeployerOps.java:644)
        at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCmdOnNode(DeployerOps.java:593)
        at oracle.sysman.core.agentpush.ui.deployer.BaseDeployerOps.doInstall(BaseDeployerOps.java:484)
oem@oragc12c bin]$ more /u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy/agentDeploy_2015-04-27_15-10-25-PM.log
/u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy/agentDeploy_2015-04-27_15-10-25-PM.log: No such file or directory
[oem@oragc12c bin]$ more /opt/app/oem12c/gc_inst/em/EMGC_OMS1/sysman/agentpush/2015-04-27_14-18-30-PM/logs/expquery03/install.log
-e Validating the OMS_HOST & EM_UPLOAD_PORT
Executing command : /u01/app/agent_12c/core/12.1.0.4.0/jdk/bin/java -classpath /u01/app/agent_12c/core/12.1.0.4.0/jlib/agentInstaller.jar:/u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/OraInstaller.jar oracle.s
ysman.agent.installer.AgentInstaller /u01/app/agent_12c/core/12.1.0.4.0 /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM /u01/app/agent_12c -prereq
Validating oms host & port with url: http://oragc12c.yto.net.cn:4903/empbs/genwallet
Validating oms host & port with url: https://oragc12c.yto.net.cn:4903/empbs/genwalletReturn status:3-oms https port is passedUnzipping the agentcoreimage.zip to /u01/app/agent_12c ....12.1.0.4.0_PluginsOneof
fs_197.zip
Executing command : /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/unzip -o /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/12.1.0.4.0_PluginsOneoffs_197.zip -d /u01/app/agent_12cExecuting command : /u01/
app/agent_12c/core/12.1.0.4.0/jdk/bin/java -d64 -classpath /u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/OraInstaller.jar:/u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/xmlparserv2.jar:/u01/app/agent_12c/core/12
.1.0.4.0/oui/jlib/srvm.jar:/u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/emCfg.jar:/u01/app/agent_12c/core/12.1.0.4.0/jlib/agentInstaller.jar:/u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/share.jar oracle.sysman
.agent.installer.AgentInstaller /u01/app/agent_12c/core/12.1.0.4.0 /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM /u01/app/agent_12c /u01/app/agent_12c/agent_inst AGENT_BASE_DIR=/u01/app/agent_12c
Failed to read the inventory
Failed to read the inventory=====================>but the inventory no problem
Cloning the agent home...
Executing command: /u01/app/agent_12c/core/12.1.0.4.0/oui/bin/runInstaller -debug -ignoreSysPrereqs   -clone -forceClone -silent -waitForCompletion -nowait ORACLE_HOME=/u01/app/agent_12c/core/12.1.0.4.0   AG
ENT_BASE_DIR=/u01/app/agent_12c ORACLE_HOSTNAME=expquery03 AGENT_BASE_DIR=/u01/app/agent_12c OMS_HOST=oragc12c.yto.net.cn EM_UPLOAD_PORT=4903 AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst b_doDiscovery=f
alse b_startAgent=false b_forceInstCheck=true AGENT_PORT=3872 -noconfig ORACLE_HOME_NAME=agent12c1 -force b_noUpgrade=true
ERROR: Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
Agent Deploy Log Location:/u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy/agentDeploy_2015-04-27_15-10-25-PM.log
============>agent client privage and "/tmp" information at hp-unix
$ bdf
Filesystem          kbytes    used   avail %used Mounted on
/dev/vg00/lvol3    5242880 384784 4820160    7% /
/dev/vg00/lvol1    1835008 376272 1447400   21% /stand
/dev/vg00/lvol7    20971520 8977200 11902024   43% /var
/dev/vg00/lvol9    7864320 3213136 4614904   41% /usr
/dev/vg00/lvol6    85983232 63055260 21527575   75% /u01
/dev/vg00/lvol5    10485760 2268216 8153768   22% /tmp===============>
/dev/vg00/lvol8    10354688 6536024 3788952   63% /opt
/dev/vg00/lvol4    52428800 13319488 38803816   26% /home
$ ls -lt
total 6
drwxr-xr-x   2 oem        oinstall      1024 Apr 27 15:14 agent_12c
drwxrwx---   5 grid       oinstall      1024 Apr 27 15:11 oraInventory
drwxr-xr-x   3 oem        oinstall        96 Apr 22 16:16 agent
drwxrwxr-x   8 grid       oinstall      1024 Apr 21 14:58 grid
drwxrwxr-x   6 grid       oinstall        96 Aug 7 2013 oracle
drwxr-xr-x   3 root       oinstall        96 Aug 2 2013 11.2.0
$ cd oraInventory
$ ls -lt
total 44
drwxrwx---   2 grid       oinstall     16384 Apr 27 15:10 logs
drwxrwx---   3 grid       oinstall      2048 Apr 22 10:36 backup
drwxrwx---   2 grid       oinstall      1024 Apr 3 2014 ContentsXML
-rwxrwx---   1 grid       oinstall      1686 Aug 6 2013 orainstRoot.sh
-rw-rw----   1 grid       oinstall        56 Aug 6 2013 oraInst.loc
$ cd ContentsXML
$ ls
comps.xml      inventory.xml libs.xml
$ ls -lt
total 6
-rw-rw----   1 grid       oinstall       842 Apr 21 10:31 inventory.xml
-rw-rw----   1 grid       oinstall       329 Apr 20 17:32 comps.xml
-rw-rw----   1 grid       oinstall       292 Apr 20 17:32 libs.xml
I view some oms document ,don't know the case

agent client's apeloy log:
$ more /u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy/agentDeploy_2015-04-27_16-22-23-PM.log
INFO: /u01/app/agent_12c/core/12.1.0.4.0
INFO: /u01/app/agent_12c/ADATMP_2015-04-27_15-33-29-PM
INFO: /u01/app/agent_12c
INFO: /u01/app/agent_12c/agent_inst
INFO: AGENT_BASE_DIR=/u01/app/agent_12c
INFO: -ignorePrereqs
INFO: ORACLE_HOSTNAME=expquery03
INFO: AGENT_BASE_DIR=/u01/app/agent_12c
INFO: OMS_HOST=oragc12c.yto.net.cn
INFO: EM_UPLOAD_PORT=4903
INFO: AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst
INFO: b_doDiscovery=false
INFO: b_startAgent=false
INFO: b_forceInstCheck=true
INFO: AGENT_PORT=3872
INFO: AGENT_BASE_DIR=/u01/app/agent_12c
INFO: ORACLE_HOSTNAME=expquery03
INFO: AGENT_BASE_DIR=/u01/app/agent_12c
INFO: OMS_HOST=oragc12c.yto.net.cn
INFO: EM_UPLOAD_PORT=4903
INFO: AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst
INFO: b_doDiscovery=false
INFO: b_startAgent=false
INFO: b_forceInstCheck=true
INFO: AGENT_PORT=3872
INFO: Setting the system property ORACLE_HOSTNAME to:expquery03
INFO: Setting the system property oracle.installer.oui_loc to:/u01/app/agent_12c/core/12.1.0.4.0/oui
INFO: Agent Base Directory is : /u01/app/agent_12c
INFO: Agent Home is : /u01/app/agent_12c/core/12.1.0.4.0
INFO: Sbin Home is : /u01/app/agent_12c/sbin
INFO: Logs Location is : /u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy
SEVERE: User has specified -ignorePrereqs when invoking the installer. All pre-requisite checks will be ignored for this installation session. Configuration failures may result if proper pre-requisites are
not satisfied.
INFO:
Setting system property CUSTOM_INVENTORY to /u01/app/oraInventory
INFO: Clone start time:2015-04-27_16-22-24-PM
INFO: Executing command: /u01/app/agent_12c/core/12.1.0.4.0/oui/bin/runInstaller -debug -ignoreSysPrereqs   -clone -forceClone -silent -waitForCompletion -nowait ORACLE_HOME=/u01/app/agent_12c/core/12.1.0.4.
0   -noconfig ORACLE_HOME_NAME=agent12c1 -force
INFO: Starting Oracle Universal Installer...
INFO:
INFO: Checking swap space: must be greater than 500 MB.   Actual 61440 MB    Passed
INFO: Preparing to launch Oracle Universal Installer from /tmp/OraInstall2015-04-27_04-22-24PM. Please wait ...Oracle Universal Installer, Version 11.1.0.12.0 Production
INFO: Copyright (C) 1999, 2014, Oracle. All rights reserved.
INFO:
INFO: org.xml.sax.SAXParseException: <Line 1, Column 38>: XML-20100: (Fatal Error) Expected '?>'.
INFO:   at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:422)
INFO:   at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
INFO:   at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:345)
INFO:   at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:307)
INFO:   at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:212)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readHomes(OiiiInstallXMLReader.java:150)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readHomes(OiiiInstallXMLReader.java:88)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallInventory.readHomes(OiiiInstallInventory.java:708)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.loadPartialInstallInv(OiiiInstallAreaControl.java:766)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initInstallInv(OiiiInstallAreaControl.java:811)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.loadInstallInventory(OiiiInstallAreaControl.java:582)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1965)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1929)
INFO:   at oracle.sysman.oii.oiic.OiicCloneSession.setAreaControls(OiicCloneSession.java:1309)
INFO:   at oracle.sysman.oii.oiic.OiicCloneSession.<init>(OiicCloneSession.java:932)
INFO:   at oracle.sysman.oii.oiic.OiicSessionWrapper.createNewSession(OiicSessionWrapper.java:878)
INFO:   at oracle.sysman.oii.oiic.OiicSessionWrapper.<init>(OiicSessionWrapper.java:189)
INFO:   at oracle.sysman.oii.oiic.OiicInstaller.init(OiicInstaller.java:511)
INFO:   at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:967)
INFO:   at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:905)
INFO: org.xml.sax.SAXParseException: <Line 1, Column 38>: XML-20100: (Fatal Error) Expected '?>'.
INFO:   at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:422)
INFO:   at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
INFO:   at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:345)
INFO:   at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:307)
INFO:   at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:212)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readHomes(OiiiInstallXMLReader.java:150)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readHomes(OiiiInstallXMLReader.java:88)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallInventory.readHomes(OiiiInstallInventory.java:708)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.loadPartialInstallInv(OiiiInstallAreaControl.java:766)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initInstallInv(OiiiInstallAreaControl.java:811)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.loadInstallInventory(OiiiInstallAreaControl.java:582)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1965)
INFO:   at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1929)
INFO:   at oracle.sysman.oii.oiic.OiicCloneSession.setAreaControls(OiicCloneSession.java:1309)
INFO:   at oracle.sysman.oii.oiic.OiicCloneSession.<init>(OiicCloneSession.java:932)
INFO:   at oracle.sysman.oii.oiic.OiicSessionWrapper.createNewSession(OiicSessionWrapper.java:878)
INFO:   at oracle.sysman.oii.oiic.OiicSessionWrapper.<init>(OiicSessionWrapper.java:189)
INFO:   at oracle.sysman.oii.oiic.OiicInstaller.init(OiicInstaller.java:511)
INFO:   at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:967)
INFO:   at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:905)
INFO: OUI-10053:Unable to generate temporary script: /tmp/orainstRoot.sh. Unable to continue install.
INFO: SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
INFO: Plugin homes:
INFO:
INFO: LD_LIBRARY_PATH environment variable :
INFO: -------------------------------------------------------
INFO: Total args: 42
INFO: Command line argument array elements ...
INFO: Arg:0:/tmp/OraInstall2015-04-27_04-22-24PM/jre/bin/java:
INFO: Arg:1:-Doracle.installer.library_loc=/tmp/OraInstall2015-04-27_04-22-24PM/oui/lib/hpia64:
INFO: Arg:2:-Doracle.installer.oui_loc=/tmp/OraInstall2015-04-27_04-22-24PM/oui:
INFO: Arg:3:-Doracle.installer.bootstrap=TRUE:
INFO: Arg:4:-Doracle.installer.startup_location=/u01/app/agent_12c/core/12.1.0.4.0/oui/bin:
INFO: Arg:5:-Doracle.installer.jre_loc=../../jre:
INFO: Arg:6:-Doracle.installer.nlsEnabled="TRUE":
INFO: Arg:7:-Doracle.installer.prereqConfigLoc= :
INFO: Arg:8:-Doracle.installer.unixVersion=B.11.31:
INFO: Arg:9:-d64:
INFO: Arg:10:-mx96m:

OUI invoke on client machine

What is name of software to invoke OUI on client machine, Is it xterm/xtreme etc?

If you've got Linux, it's already available, otherwise you'll have to get the software, install it and configure it, any Xterm emulator is useful, you could try cygwin (http://www.cygwin.com/)

Oracle 10g RAC install on OEL5 update 5 OUI failing to write on tmp fs

Dear Friends,
I am attempting to install Oracle 10g R2 on Oracle Enterprise Linux 5 update 5 but facing some errors. Can't believe i have done everything right as far as oracle docs n my understanding concern. when i try to invoke runInstaller for CRS it fails with following error:
[oracle@server01 clusterware]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-11-15_04-36-47PM. Please wait ...[../stage/Components/oracle.swd.oui.core/10.2.0.1.0/1/DataFiles/filegroup1.jar]
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
note: ../stage/Components/oracle.swd.oui.core/10.2.0.1.0/1/DataFiles/filegroup1.jar may be a plain executable, not an archive
Error in writing to directory /tmp/OraInstall2010-11-15_04-36-47PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
[oracle@serverr01 clusterware]$
I am also attaching the cluster verfication result, if you wish to have a look at this.
Please let me know if you see any pointers.
Many Thanks

hi
did you extract the zip file without any errors and with oracle user?
is the /tmp full? post "df -h"
you can manually set another temp directory using "export TMPDIR=/any/path"
hth

Oui-10207error while installing oracle 10g on linux in vmware

Hi,
I have installed vmware on windows 7(64 bit) on which i have installed Oracle Enterprise linux 5. I have set all the variables correctly. but when i try to install oracle 10g on linux, i get the error
OUI-10207:there is not enough disk space in the OUI swap area /tmp/OraInstall2011-10-17_03-44-48PM.Please make atleast 529KB of space avaivale and retry.
but i have around 95bg of space. My partitions are as follows
Device Boot Start End Blocks Id System
/dev/sda1 * 1 12551 100815876 83 linux
/dev/sda2 12552 13041 3935925 82 Linux swap/solaris
/dev/sda3 13042 13054 104422+ 83 linux
Please help me in solving the problem.
Thanks
Viraj

What is your swap size? try to increase size
execute below command on terminal, paste result here.
#swapon -s
#free
Tips : how to increase swap space
http://hackertrip.wordpress.com/2011/09/11/increase-swap-space/

OUI-25023 Error when trying to upgrade 10.1.0.3 CRS to 10.2.0.1 Clusterware

Hi all,
I'm trying to upgrade my RAC installation.
To test and validate the procedure, i'm first trying it on a one node cluster (node named camrdo01) running on 10.1.0.3 (CRS & Database).
When i'm lauching OUI for the Clusterware 10.2.0.1 installation, on the node selection screen, the node is present and selected, but I can't go on, i'm getting an OUI-25023 Error.
Here is the log from this installation:
INFO: Node selection page will be shown because a cluster install is detected on the selected home.
INFO: Setting variable 'CLUSTER_NODES' to 'CAMRDO01,'. Received the value from a code block.
INFO: The cluster node list 'CAMRDO01' is derived from the Oracle home properties.
INFO: Local node 'camrdo01' is derived from the clusterware stack.
INFO: Setting variable 'LOCAL_NODE' to 'camrdo01'. Received the value from a code block.
INFO: isRollingUpgradeEnabled():true
INFO: Rolling upgrade is enabled for this product.
INFO: Setting variable 'REMOTE_NODES' to 'CAMRDO01,'. Received the value from a code block.
INFO: isRollingUpgradeEnabled():true
INFO: Setting the 'ClusterInstallDescription' property to 'Select nodes (in addition to the local node) in the hardware cluster where the installer should install products that you select in this installation.'.
INFO: Setting the 'SingleInstanceDescription' property to 'Select this option if you want to perform a single node non-cluster installation even though the local node is part of a hardware cluster.'.
INFO: Setting the 'InvalidNodes' property to 'null'.
INFO: Setting the 'AllowRemoteNodeSelection' property to 'true'.
INFO: Setting the 'ShowCRSSoftwareVersion' property to 'false'.
INFO: Setting the 'NewHome' property to 'false'.
INFO: Setting the 'ClusterNodes ( CLUSTER_NODES )' property to 'CAMRDO01,'. Received the value from the UI page.
INFO: Setting the 'LocalNode ( LOCAL_NODE )' property to 'camrdo01'. Received the value from the UI page.
INFO: Setting the 'RemoteNodes ( REMOTE_NODES )' property to 'CAMRDO01,'. Received the value from the UI page.
INFO: Performing tests to see whether nodes CAMRDO01 are available
SEVERE: OUI-25023: The local node is not selected for installing this product. Include the local node in the cluster list or perform the installation on the nodes on which the install is to be performed.
INFO: User Selected: Yes/OK
Does anyone have tryed and succeded in upgradnig 10.1.0.3 RAC to 10.2.0.1, and is there any workaround for this problem?
thx for help,
Siftin

Can you check the install log to see if any errors are recorded there ?
http://download.oracle.com/docs/cd/B14117_01/em.101/b12140/A_oui_troubleshooting.htm#sthref268
HTH
Srini

10gR2 OUI failure on Windows XP Pro SP3

I had 10g Express edition running successfully but wanted to move up to 10g Standard / Enterprise.
I am running Windows XP Professional with Service Pack 3 and my computer has an AMD Athlon 64 X2 Dual Core Processor.
I have downloaded the windows 32bit version of 10gR2 (10201_database_win32.zip).
When I run the setup.exe it runs a cmd shell for 15 seconds or so but then has a fatal error and closes.
By then it has displayed the following:
Starting Oracle Universal Installer...
No pre-requiste checks found in oraparam.ini, no system pre-requiste checks will be executed.
Preparing to launch Oracle Universal Installer from C:\DOCUME~1\user\LOCALS~1\Temp\OraInstall2008-05-15_10-05-35AM. Please wait ...Then I get:
oui.exe has encountered a problem and needs to close.
We are sorry for the inconvenience.and get the option to send a report to Microsoft.
I have checked that the file size and cksum values match those on the download page. They do.
I have now uninstalled the Express version in case that was getting in the way somehow. It made no difference.
I have checked the certification details and it seems to be OK.
Anyone got any ideas?

Hi,
I'm experiencing I believe exactly the same thing. I start oui from a directory with no spaces, and with a temp directory path that also contains no spaces (set TEMP=c:\temp before running setup). The following appears in a new console window, and after a few seconds, the console window closes with no additional information. I do have XP/SP3 -- has anyone seen this situation and solved it and/or can anyone confirm that SP3 is the issue? Thanks.
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from c:\temp\OraInstall2008-10-20_08-06-43AM.
Please wait ...
Regards,
Gordon
Edited by: user523239 on Oct 20, 2008 5:14 AM

OUI patch install hangs, files being used by another application

Hi when a patch install hangs, and the OUI error message is that files needing to be reinstalled are being used by another application, how can you identify which files or processes are responsible so that they can be shut down? All normal Oracle services and DTC are shut down already.
This is patch 6810189 upgrade to 10.2.0.4 (from 10.2.0.3) which includes the April CPU on a Win32 server.

Please check any oracle service is still on ..
need to shutdown listener/oracle service .. and other db service belongs to Oracle.
You can download windows process explorer and check for any oracle process and kill those and then apply CPU
Link :
http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
--Girish

Creation of ASM disk for OUI

I need to install a Oracle Database in order to install Enterprise Manager Cloud Control 12c.
Need the database to use a ASM disk.
I used the following command to create the disk, per the Oracle Database Installation Guide.
#/usr/sbin/oracleasm createdisk DISK1 /dev/sdd1
#oracleasm listdisks
DISK1
However, when running the OUI for Oracle Database 12c (understand 11.2.0.3 is certified for Cloud Control), step 7
errors INS-30517 when attempting to select "Oracle Automatic Storage Management" for "Storage type".
Researched the error at this location but no cause or action was provided.
http://docs.oracle.com/cd/E16655_01/server.121/e26079/common_errormessages.htm
INS-30517: Automatic Storage Management software is not configured on this system.
The database install guide states that I need to ensure the "disk discovery string" is set the "ORCL:*" or is left empy ("") so the installer discovers these disks.
It doesn't show how to confirm or change the settings.
At this point I'm at a stopping point.

All ASMLib installations require the oracleasmlib and oracleasm-support packages. The oracleasm kernel driver is included in the Oracle UEK kernel. Perhaps you are missing the oracleasmlib package. You can download it from:
Oracle Linux: Oracle ASMLib | Oracle Technology Network
Oracleasmlib is not necessary for ASM to work, but it contains software necessary for Linux oracleasm, including the /usr/sbin/oracleasm-discover utility, which the Oracle installer used in the previous 11g version to detect available ASM volumes.

Error: OUI.exe Stopped Working 11g R2 32-bit Client on Win 7 64-bit

I am receiving an error "oui.exe stopped working" when running setup.exe to install Oracle 11g R2 (win32_11gR2_client.zip for Win 32-bit) client on Windows 7 Enterprise 64-bit. I never even get as far as the Oracle installation dialog box. I am trying to install 11g R2 32-bit because it is my understanding the 64-bit version of Oracle client is not compatible with Toad for Oracle.
I have read numerous posts on the subject and have tried just about everything I can think of to get around the error. When I run the setup.exe -debug I can see that teh files are unzipped and the installer seems to fail when it hit the section where it tries executing java.exe. Once the dialog box appears with the error message, I am not able to get back to the command window to extract the debug results. I can only see it partially in the background behind the dialog box. When I hit cancel to close the error dialog, the debug window also closes, so no way to get the details of the debug results
I am logged into Win 7 as a member of the Adminstrators group and have verified that the Windows User Access Control (UAC) is turned off. I get the erorr message whether I run as Administrator or not. I have unzipped all the files and folders under the \client directory from the zip file to a folder c:\temp\. So the setup.exe and all folders below it are in the c:\temp directory. I did this because one post suggested an issue with long path names or path names with spaces when executing setup.exe.
Seems like it should not be this difficult. I never had issues in the past installing Oracle client on Windows XP Pro. This is my first attempt at installing under Win 7.
Any help or direction would be much appreciated.
Edited by: user10421280 on Nov 21, 2011 1:27 PM

orafad and PavanG,
First let me thank you both for your multiple attempts to help me. I finally figured out what was causing the issue with the Oracle Installer, oui.exe not running properly. Last night I was looking around into the Windows Event Viewer and found an Error entry for oui.exe that pointed to a program directory and .dll in the \\program files\appsense\ directory path. It seems that in addition to the McAfee virus scan, host intrusion, unwanted programs, group policy manager, etc., there is another application installed on the machine that governs what programs can and cannot run. I don't know much about it other than when the program was temporarily suspended, the setup.exe and oui.exe install kicked off fine without the "oui.exe stopped working" error message. It proceeded happily to the Oracle Client installation dialog. All along our IT desktop support was trying to help me with the install and they repeatedly disabled the McAfee programs to no avail, but not the other utilities. It was almost like even they were unaware of this other application running in the background since they never suggested disabling it.
Either way, I'm happy to say that I am now able to successfully launch the Oracle Client installer without issue. I've also learned a little about getting the Oracle 11g Instant client to work with Toad while I worked through the issue with the installer. I could almost get by completely with just using the Instant Client if I didn't have to use SQL*Loader (sqlldr.exe) and tnsping.exe. Any suggestions for getting these two functions to work with the Instant Client would be appreciated. I tried copying the binaries and the message files into the appropriate instant client directories, but windows kept complaining about missing .dll's when I tried executing the commands.
If there is no workaround for getting these functions to work with the Instant Client, and I have to do an Oracle Client install, at least now I can. Do you know if I would need to do the full "Administrator" install to get these functions, or can I do just the "Run Time" install to get sqlldr and tnsping?
Thanks again for your help

9.2.0.6 OUI cannot write to its own installation directory

I would like to install the 9.2.0.6 patchset on a freshly installed 9.2.0.4_linux_x86_64 (AMD). The system is RedHat EL AS 3. I have installed j2re1.4.2_07 (because the Java brought by Oracle does not even start the VM ...) and edited the ./install/oraparam.ini to use our own JRE.
runInstaller tells me that all system requirements are met. But - alas - OUI says that it cannot write into the directory that it created itself (tmp/OracleInstall...). The rights matrix of this directory is drwxr-xr-x oracle oinstall, even if I set umask to 0000. There are several GB free.
The last message is
: file or directory not found
What is going on here (or rather what isn't)? What file is OUI looking for?
Thanks in advance for kind replies

Ivan,
the rights for /tmp were already rwxrwxrwt. Even if I remove the sticky bit, the error remains. I have the strange feeling that this is not a rights problem. Do you have any idea what
: file or directory not found
is supposed to mean? What file is OUI looking for? Does OUI 10.1.0.3.0 check for temporary files of other OUI versions (e.g. OUI 2.2.0.18.0 bundeled with Oracle 9.2.0.4)?
I think I will start from scratch: remove and reinstall 9.2.0.4 and then try the patch installation again.
Frank

OUI-10094

Similar Messages

Maybe you are looking for