OUI will not detect ASM disks on EqualLogic PS6100

RHEL 5.5 w/ ASMLIB
Oracle 11g w/ Dell EqualLogic PS6100 iSCSI SAN
We've created the ASM disks and can see them before starting the OUI...
[root@dr-dbnode2 logs]# kpartx -l /dev/mapper/eql-8-cb2b76-0fde2e258-3ac70a955884f0dd-oracleasmdisk3
eql-8-cb2b76-0fde2e258-3ac70a955884f0dd-oracleasmdisk3p1 : 0 585954747 /dev/mapper/eql-8-cb2b76-0fde2e258-3ac70a955884f0dd-oracleasmdisk3 63
[root@dr-dbnode2 logs]# kpartx -l /dev/mapper/eql-8-cb2b76-0d8e2e258-55270a955854f0dd-oralceasmdisk2
eql-8-cb2b76-0d8e2e258-55270a955854f0dd-oralceasmdisk2p1 : 0 585954747 /dev/mapper/eql-8-cb2b76-0d8e2e258-55270a955854f0dd-oralceasmdisk2 63
[root@dr-dbnode2 logs]# kpartx -l /dev/mapper/eql-8-cb2b76-074e2e258-08670a9557f4f0dd-oracleasmdisk1
eql-8-cb2b76-074e2e258-08670a9557f4f0dd-oracleasmdisk1p1 : 0 585954747 /dev/mapper/eql-8-cb2b76-074e2e258-08670a9557f4f0dd-oracleasmdisk1 63
[root@dr-dbnode2 etc]# oracleasm listdisks
ASMDATA1
ASMDATA2
ASMDATA3
[root@dr-dbnode2 etc]# oracleasm querydisk -v -d -p ASMDATA1
Disk "ASMDATA1" is a valid ASM disk on device /dev/dm-2[253,2]
/dev/mapper/eql-8-cb2b76-074e2e258-08670a9557f4f0dd-oracleasmdisk1p1: LABEL="ASMDATA1" TYPE="oracleasm"
/dev/sdj1: LABEL="ASMDATA1" TYPE="oracleasm"
[root@dr-dbnode2 etc]# oracleasm querydisk -v -d -p ASMDATA2
Disk "ASMDATA2" is a valid ASM disk on device /dev/dm-8[253,8]
/dev/mapper/eql-8-cb2b76-0d8e2e258-55270a955854f0dd-oralceasmdisk2p1: LABEL="ASMDATA2" TYPE="oracleasm"
/dev/sdf1: LABEL="ASMDATA2" TYPE="oracleasm"
[root@dr-dbnode2 etc]# oracleasm querydisk -v -d -p ASMDATA3
Disk "ASMDATA3" is a valid ASM disk on device /dev/dm-4[253,4]
/dev/mapper/eql-8-cb2b76-0fde2e258-3ac70a955884f0dd-oracleasmdisk3p1: LABEL="ASMDATA3" TYPE="oracleasm"
/dev/sdg1: LABEL="ASMDATA3" TYPE="oracleasm"
[grid@dr-dbnode2 ext]$ kfod asm_diskstring='/dev/oracleasm/disks/*' nohdr=true verbose=true disks=all status=true op=disks
286110 CANDIDATE /dev/oracleasm/disks/ASMDATA1 grid asmadmin
286110 CANDIDATE /dev/oracleasm/disks/ASMDATA2 grid asmadmin
286110 CANDIDATE /dev/oracleasm/disks/ASMDATA3 grid asmadmin
When we run the OUI we get to the 'Add Disks' screen and there are no disks listed at all...
So we tried to run with a -silent install and -force with the disks in our rsp file and the action log shows the following...
[root@dr-dbnode2 logs]# cat installActions2012-01-12_05-06-51PM.log
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state CreateASMDiskGroup
INFO: Completed executing action at state <CreateASMDiskGroup>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <CreateASMDiskGroup>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <CreateASMDiskGroup>
INFO: inventory location is/opt/oracle/app/oraInventory
INFO: inventory location is/opt/oracle/app/oraInventory
INFO: inventory location is/opt/oracle/app/oraInventory
INFO: Is CRS Installed false
INFO: while getting CSS versionjava.lang.Exception: Unable to find the specified Oracle Home.
WARNING: KFOD not found at
INFO: inventory location is/opt/oracle/app/oraInventory
WARNING: KFOD not found at
FINE: oracle.install.commons.util.Resource:Can't find resource for bundle oracle.install.asm.resource.ASMErrorResID, key oracle.install.asm.bean.ASMInputValidationErrorCode.hint
SEVERE: [FATAL] [INS-30508] Invalid ASM disks.
CAUSE: The disks [dev/oracleasm/disks/ASMDATA1, /dev/oracleasm/disks/ASMDATA2, /dev/oracleasm/disks/ASMDATA3] were not valid.
ACTION: Please choose or enter valid ASM disks.
INFO: Advice is ABORT
INFO: Adding ExitStatus INVALID_USER_INPUT to the exit status set
INFO: Completed validating state <CreateASMDiskGroup>
INFO: Terminating all background operations
INFO: Terminated all background operations
FINE: oracle.install.commons.util.Resource:Can't find resource for bundle oracle.install.commons.util.resource.ErrorCodeResourceBundle, key oracle.install.commons.util.exception.CommonErrorCode.hint
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -2
INFO: Shutdown Oracle Grid Infrastructure
INFO: Unloading Setup Driver
Been stuck here for a couple days...
My current direction is looking at the "WARNING: KFOD not found at" message...
kfod does exist in the /tmp/OraInstall2012-01-12_04-40-31PM/ext/bin/kfod folder while the installation is running...so I'm not sure what to make of it.
Let me know if anyone can shed some light here...
Thanks in advance,
Colby

We managed to figure it out...
It turns out that a previously failed -silent run of the OUI had left some Oracle files hanging about. The OUI not showing the ASM disks because they were associated to the failed installation. After removing 'ALL' the files from the failed installation and a reboot we were able to get through the full install successfully.
Make sure you fully clean up after a failed install...
cs

Similar Messages

Finder will not detect hard drive; disk utility will

Finder will not detect my hard drive. Disk utility will, however, it will not eject the harddrive from the computer. Any help?
I have a lot of files on it, so I would not be happy if they cannot be retrieved. It has been working for the past 2(?) years without much issue.

SilverSkyRat wrote:
Have you checked the manufacturer's web site for any firmware updates for the drive?
In Disk Utility, select the drive and click Repair Disk. If any errors are displayed, rerun Repair Disk until no errors occur.
You can't run repair disk while booted from the disk to be repaired.
Boot from Recovery, then run Repair Disk.

New Oracleasm Libraries not detecting ASM drives consistently

Has anyone run into problems with the new Oracle ASMLib not detecting ASM drives on load and on scandisks commands? My /etc/sysconfig/oracleasm is the standard defaults that I used with the previous version of ASMLib, i.e. I do not specify the exclude or scanorder.
I have noticed that if I run scandisk while specifying the LUN in question, then ASMLib will detect the drive properly. I have also noticed that if I run the "scandisks" multiple times (100's), then it will at times find the proper ASM disks. I have played with various settings in the /etc/sysconfig/oracleasm file as well with no luck on getting consistent ASMLib detection.
The workaround I have for now is to put a "oracleasm scandisks /dev/sd*1" into my /etc/rc.d/rc.local file.
System is HP BL460c running Red Hat 5.2 with QLogic Driver version 8.01.07.25-fo
----------- some screen output -----------------------
[root@ipht01 ~]# rpm -qa | grep oracleasm
oracleasm-support-2.1.0-1.el5
oracleasmlib-2.0.3-1.el5
oracleasm-2.6.18-92.el5-2.0.5-1.el5
[root@ipht01 ~]# oracleasm listdisks
[root@ipht01 ~]# oracleasm querydisk /dev/sdb1
Device "/dev/sdb1" is marked an ASM disk with the label "WIND_ASMDISK001"
[root@ipht01 ~]# oracleasm scandisks
Reloading disk partitions: done
Cleaning any stale ASM disks...
Scanning system for ASM disks...
[root@ipht01 ~]# oracleasm listdisks
[root@ipht01 ~]# oracleasm querydisk /dev/sdb1
Device "/dev/sdb1" is marked an ASM disk with the label "WIND_ASMDISK001"
[root@ipht01 ~]# oracleasm exit
Unmounting ASMlib driver filesystem: /dev/oracleasm
Unloading module "oracleasm": oracleasm
[root@ipht01 ~]# oracleasm init
Loading module "oracleasm": oracleasm
Mounting ASMlib driver filesystem: /dev/oracleasm
[root@ipht01 ~]# oracleasm listdisks
[root@ipht01 ~]# oracleasm querydisk /dev/sdb1
Device "/dev/sdb1" is marked an ASM disk with the label "WIND_ASMDISK001"
[root@ipht01 ~]# oracleasm scandisks /dev/sdb1
Reloading disk partitions: done
Cleaning any stale ASM disks...
Scanning system for ASM disks...
Instantiating disk "WIND_ASMDISK001"
[root@ipht01 ~]# oracleasm listdisks
WIND_ASMDISK001

Sergio,
My issue is with the 2.0.5 Version of ASMLib. Previously, I was using oracleasm-2.6.18-92.el5-2.0.4-1.el5.x86_64.rpm. Please see the first section of the screen output for the complete list or Oracleasm installed rpms (latest from OTN). Also, this node was after an immediate OS build with no databases or other activity being done on the node while I attempt to scandisks. I can't imagine that I have drives being repeatedly open/closed.
I do have the following in my /var/log/oracleasm file, but the running of oracleasm was done by the root user and the permissions on the devices have not really changed between 2.0.5 and the older 2.0.4 that I have been using.
Loading module "oracleasm": oracleasm
Mounting ASMlib driver filesystem: /dev/oracleasm
Reloading disk partitions: done
Cleaning any stale ASM disks...
Scanning system for ASM disks...
oracleasm-read-label: Unable to open device "/dev/sda1": No such file or directory
oracleasm-read-label: Unable to open device "/dev/sda2": No such file or directory
oracleasm-read-label: Unable to open device "/dev/sda3": No such file or directory
oracleasm-read-label: Unable to open device "/dev/sdb1": No such file or directory
oracleasm-read-label: Unable to open device "/dev/sdc1": No such file or directory
oracleasm-read-label: Unable to open device "/dev/sdd1": No such file or directory
[root@ipht02 ~]# ls -l /dev/sd*1
brw-r----- 1 root disk 8, 1 Nov 17 12:51 /dev/sda1
brw-r----- 1 root disk 8, 17 Nov 17 14:04 /dev/sdb1
brw-r----- 1 root disk 8, 33 Nov 17 14:04 /dev/sdc1
brw-r----- 1 root disk 8, 49 Nov 17 14:04 /dev/sdd1
Anything I can do to troubleshoot?
Thanks
Robert

IPod 4th gen grayscale will not detect usb connection.

Hello everyone, I have a iPod 4th gen grayscale and I'm running Ubuntu, everything has worked well for about a year now, I have been syncing my iPod through VirtualBox with Windows XP for as long as I have been using Linux, though, for some reason, my iPod has stopped noticing my usb being connected, I know it's not the usb cable, or the usb ports, I have restarted my iPod and put it into disk mode, still no luck, restarted my computer, Linux will not detect anything plugged in, nor will Windows, though my iPod shows the battery charging when plugged in, but iTunes will not detect the iPod.
I have switched the hard drive of the iPod out seeing if that was the problem, still no luck, my car dock will pick up the iPod and play music, so will my other docks, I thought it might of been Linux at first, so I plugged it into my desktop with Vista, it also will not detect it.
Does anyone have an answer to this riddle?

A bad USB hub will cause the problem ... are you using it ??

How to open RAC node2 usng spfile which will stay in ASM disk?

Hi,
I have installed oracle 11g r2 rac with asm in two nodes. OS is hp-Unix.
I have installed oracle11g Active Data Guard using Single alone Database.
Both RAc and Active Data Guard works fine.
I have not configure Data Guard Broker.
N.B Rac node1 is running using spfile which is in ASM disk (+DATA/spfiledcpdb.ora) but node2 is running using pfile.
Question: how to open node 2 using spfile which will stay in ASM disk like node 1?
Thanks
Solaiman
Edited by: 876149 on Apr 1, 2013 10:08 AM

Modify your PFILE to specify only IFILE='location_of_spfile'
OR
use STARTUP PFILE='location_of_spfile'
Ensure that the spfile does have the 2nd instance specific parameters defined correctly.
Hemant K Chitale

Windows 7 airport utility will not detect time capsule

Hi, I have a current generation time capsule and I am having problems connecting to my Windows 7 home premium PC. The time capsule connects and works perfectly using my Macbook. My set up is this: DSL router conected to the time capsule via ethernet cable. I can get the time capsule to pick up wireless and connect to my PC, but upon opening the airport utility it will not detect the time capsule at all. I have trolled the internet for about 3 hours trynig various things, none of which have worked. Has anyone had this issue and resolved it?

The airport utility has nothing whatever to do with disk access.
It helps having bonjour available in the computer. And the utility should be able to bring up TC setup.. although as noted.. apple have already bypassed windows as it is too old. The new TC requires v6 utility.. the version for windows is 5.
None of that is relevant to opening the TC hard disk.
-If this is not the case, can you please advise on how to access the storage on a windows 7 PC
Did you follow the instructions from my previous post.
Open your windows explorer and type into the address bar,
\\TCname or \\TCIPaddress
Where you replace TCname with the actual name of the TC.. your nice new short SMB compatible name.
Or use the IP address of the LAN on the TC.. by default 10.0.1.1
If you did this and it failed, you need to ping the TC by name and by IP address from command window..
Does the TC respond to pings??
If so it should be able to open the TC disk.. but you will probably have to use the IP address not the name which is likely illegal.
I also mentioned the issue of SMB names..
Please tell me what is the name of your TC as you set it up in the Mac..
Does it look like this.
Fred Blog's Airport Time Capsule.
If so it is too long.. it has spaces and it has an illegal character.. from windows the name should be short, no spaces and pure alphanumeric.
Please reset the TC to factory and start again.. you can use the airport utility in the Mac.
Do not use apple suggested names.. which are WRONG.
Use names like TCgen5
And for wireless TCwifi
Then try again with the windows.
If you continue to have issues, try using ethernet to the computer from the TC instead of wireless.
Make sure ipv6 is on and set to link-local or the PC equivalent of that.. I will need to look that up.

HT1386 iTunes will not detect my iPhone(5s) after the most recent update.

Ever since i updated iTunes it will not detect my iPhone, every time i plug it in it asks to trust the computer which I always use to sync my iPhone. Every time i select "trust this computer" and it still won't detect it. PLEASE HELP.

Hello fercho965,
Sorry to hear that your iPhone is currently not recognized by iTunes. I found an article with steps you can take when you experience an issue like this. I wasn't sure whether you were using a Windows or Mac computer, so I included the respective articles for each:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Thank you for using Apple Support Communities.
Best,
Sheila M.

My imac will not detect external monitor after recent update. Is there a way to fix this?

I have a VGA monitor plugged in to my imac using the VGA adapter to the mini-DVI. All was working well. Since I updated over the weekend, the computer will not detect the monitor.
Any ideas how to fix this?

Pcantin wrote:
I have tried another VGA monitor and that failed as well. Since you don't think the update was the cause, it may be that the adapter I am using decided to call it quits. I will see if I can find another and test that out.
I will look into the external drive idea as well.
Thanks for your help on this.
I didn't think about the adaptor, but you should at least visually inspect both the adaptor and the cable at both ends. If one or more pins got bent even slightly the connection might fail. The cables can also fail internally. Replacing the adaptor and cable may be the quickest thing to do initially. If you want to try to save money, first replace the adaptor, and if the problem persists, then go replace the cable (or vice versa).

On a windows 7, ifinally got the Iphone4 setup so i can copy my pictures off of the phone. know itunes will not detect the iphone to get it synced. how do i get it back to be seen by Itunes?

On a windows 7, i finally got the Iphone4 setup so i can copy my pictures off of the phone. Know itunes will not detect the iphone to get it synced. how do i get it back to be seen by Itunes?

See earlier post by tt2
https://discussions.apple.com/message/7217190#7217190

HP installer will not detect networked LaserJet MFP M1536dnf just on some PCs

Hello,
this printer/scanner was working fine (printer still works fine via a Windows print server). Then scanning (via network) stopped working on one PC (Windows 7).
Tried to uninstall drivers / HP software and reboot. Then tried to install again - HP Installer will not detect printer on the network no matter what. I can ping the IP of this printer, access its web interface without any issues on the same PC. Tried specifying IP address in the installer - does not detect, the same issue with MAC address.
Had a Windows 8 machine with drivers / software installed on it, tested - scanning still worked fine on that PC. Tried to remove HP software to see if problem will appear. And it did! I cannot install the same software package which I still had in downloads - it will NOT detect the printer on network.
Upgraded printer firmware - no change, even though I don't expect this to be a printer issue as it worked fine until I have uninstalled software on this W8 machine.
Tried using HP Scan & Print doctor. That thing doesn't see printer/scanner installed and only suggest to download and install software which is not helpfull at all.
I also tried extracting HP installation files and finding *.inf files which could be used to add scanner via Windows directly, but haven't succeded with that (I would also be not sure how to specify network IP address in such a case anyway).
Any help is MUCH appreciated. We are kind of stuck...
Thanks!

Hi,
Run some diagnostics and see if any issues are discovered.
There have been reported issues with the NVIDIA 650 with some of the HP PCs. Additionally, most models of the NVIDIA 650 require a 400 watt power supply as the minimum and some models require a PCI six (6) pin power connector which the 300 watt power supply in your PC is not provisioned.
There is a BIOS update posted for your PC so you might want to consider installing that update.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Can i install windows 7 via bootcamp (MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air. In bootcamp i allocate the partition then i click install and bootcamp will not see the disk.

Can i install windows 7 via bootcamp (on my MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air via remote disk. In bootcamp (on my air) i allocate the partition, then i click install, and bootcamp will not see the disk from my macbook pro's drive. How do i get the bootcamp assistant running on my MB air to automatically find the disk in my macbook pro with the ISO image of windows 7? The remote disk on my air can find the cd but bootcamp will not begin installing it. Anyway to do this without buying the damned usb drive?

I don't know first hand if you can use the Remote Disk option with Windows but as of 10.7.2 you can now use BCAssistant to make a bootable USB (thumb drive or external disk) W7 installer with the Boot Camp drivers installed also. Have you tried that yet?

My Mac Mini will not read TDK disks from my iMac G3.

My Mac Mini will not read TDK disks from my iMac G3.
I used an iMac G3 (2001) -- the ones that looked like a big pod -- running on OS X and saved files to TDK CD-R, 700 MB disks, which worked fine. Now that I have a Mac Mini (model number A1347) I cannot get this computer to read those disks, made on the iMac G3. Once inserted each disk will open and I can retrieve files for a short period, then the problems start. The computer makes some noises, the beach-ball/pinwheel goes around and I cannot get the files to open or the disk to eject. After a while the disk does eject -- to my relief. I keep using Control+E until ejection happens.
My Mac Mini (2010-2011) is hooked up to a View Sonic HDMI LED monitor, an iOmega external hard-drive for backing up, an Epson Stylus C88 Plus printer and to the internet by a fibre 10MB feed. The Mac Mini runs on OS X version 10.6.8 Snow Leopard: Processor Speed:2.66 GHz
I took the Mac Mini to an Apple retailer and he hooked the computer up to one of his monitors and it read the TDK disks just fine. I am now using Sony CD-RW, 700 MB disks, but I would prefer to use my TDKs because I have such a large pile of blank ones to use and there are those TDK disks with information that I want to look at from time to time. Can anyone tell me what to do?
DJG

Try disconnecting everything attached to the Mini except the monitor.
If that doesn't work, try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later. If successful, copy the files to the original account Public/Dropbox.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - About
Safe Mode

My wifi will not detect networks and will not search for other networks when I search for them. Do I need a new iPhone or can I fix it myself?

My wifi is on and when it tries to find a wifi connection, the gray little circle just keeps spinning and will not detect our home wifi. I have tried to search for it and connect to it manually, but it will not search for the network name. I'm hoping I don't need a new phone so please help.

The following may have something that will help: http://support.apple.com/kb/TS1398

I just got an ipod touch but it will not sync to itunes. my itunes will not detect it. but my computer does. what do i do???

i just got an ipod touch but it will not sync to itunes. my itunes will not detect it. but my computer does. what do i do???

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

HT1386 Itunes will not detect any of my devices

Itunes will not detect any of my devices. Any suggestions? I've shut down and restarted, turned devices off and on. Not sure what else to do.

Hello, bone61.
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver. If the issue persists try all remaining steps.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

OUI will not detect ASM disks on EqualLogic PS6100

Similar Messages

Maybe you are looking for