Outbound Pricing Error VJ000-No relevant partner system EXISTS

All
I am trying to create an Outbound IDOC from Pricing master record VK12. I have maintained for existing working LS  DX010 partner system message type COND_A in the outbound and Inbound Parameter section via WE20.
When I try to create/ send IDOC from VK12 it always gives me the message VJ000 "No relevant partner system DX1020 exists for output category COND_A". Can anyone tell me what steps am I missing to create the outbound IDOC.
I will appreciate help in this. Thanks in advance
Thanks
SANA S

Check this link
[Creating Partner Profiles for Logical Systems |http://help.sap.com/saphelp_dimp50/helpdata/EN/19/337d937f0311d2b467006094b9c9be/frameset.htm]
thanks
G. Lakshmipathi

Similar Messages

  • NO RELEVANT PARTNER SYSTEM

    Hi friends,
    I have created a interface in sap PI purpose is to display warehouse stock
    in POS system. But we have no inbound configurations for it. Now the problem is
    when iam trying in SAP system T-code VK13 and i want to move the stock to FTP then this error
    will displayed
    NO RELEVANT PARTNER SYSTEM  XXXXXX(PORT)  EXISTS FOR OUTPUT CATEGARY COND_A
    please help friends.
    Thanks
    Hari

    HI Hari,
    Could you provide more clarification on following points..
    -     What is the exact problem?
    -     Do you want to send data thru PI to FTP..am I right? So do you want to develop scenario IDOC to PI to FTP?
    -     To do so you need to have partner profile and port configured for your PI system in your SAP R/3 system.
    -     And need to develop the interface in PI which will convert the SAP message to FTP
    Thanks,
    Bhupesh

  • No reservations relevant to MRP exist for project

    Hi all,
    While doing MRP for WBS through MD51 i have got an error " No reservations relevant to MRP exist for project " . I am not getting where the problem is occurs.
    Regards,
    Swapnil Vaidya

    Dear .
    1.Please check wether in your project builder(CJ20N) Project Status is REL  and  Procurement Type is  :Reservation for WBS element . then it will not create this masg.
    2.Check whether MRP run date is after the project start date as well as the WBS element is also with in the time frame
    3.Check the material master parameters(MRP1-MRP4 view ) for Project material which are to be planned by that Project WBS .
    Check and revert
    Regards
    JH
    Edited by: Jiaul Haque on May 1, 2010 2:27 PM

  • Pricing error mandatory conditions TTE are missing

    Daer all,
    by creating an sales-order via transaction CRMD_BUS2000115 we get the following 2 errors after the input of one sales-position:
    - Item 10     No Tte Input document found B7FA9743CEC6A21DE1000000C0A84D08     
    - Item 10     Pricing error: Mandatory condition 0TTE is missing     
    The oss-notes 519942 (and the depending ones) did not lead into a solution. The simulation TTE_SIMULATION of the pricing was successful.
    Has anybody an idea especially, what appoints the relevant customizing settings ?
    Thanks in advance for any feed-back.

    Hi Michael
       CRM are dtermined using the condition technique(E.g.condition type MWST or UTXJ).Have you assisgned the Business partenr Tax Classification?.If the billing is carried out in the CRM system,tax determination will be accomplsihed by using the TTE.The condition typeOTTE triggers the call of the TTE.Maintenance will take place in CRM.
    PLEASE CHECK
    Business Partner Classification
    *Assignment of tax types and groups
    *Tax Calculation per country and Region.
    *Tax numbers for NATURAL PERSON
    Product Tax Classification.
    *Assisgnment of tax types and Groups
    *Tax Calculation per country and Region
    Organisational Unit-Business place
    Customizing of Tax Types and Tax Groups for BP and Products.
    I hope this helps!!

  • Pricing Error - message no. vf073

    Hi All,
    Good day to you all!
    I have one issue related to the Pricing error in Invoice.
    User had created S.O., Invoice.
    But, when the invoice was saved a billing document was created but has no accounting document that was created. I then manually create the accounting document by clicking the Release to accounting in the billing document menu but a pricing error occured. And when I check the billing document with error I notice that from the Item Detail - Price Data  tab the checkbox for Incomp. Pricing has a mark\check in it. When I check the other billing document that has no error this box has no check.
    Experts please help me how to solve this issue.
    Thank you very much in advance for the help.

    Hi Angelica,
    This error seems to be related with the incompletion procedure. In IMG - sales & distribution - basic functions - Log of Incomplete terms.
    Here you have a button for "billing doc" also.
    Also in Define incompleteness procedures - select "A" sales header and double click on "procedures" select 11-standard order & double click on "fields" Here you will see the particular field that you want to be filled in with data while you process the sales order. Also you will see a selection for the <b>"status group"</b> If in the status group there is a tick on billing also, then the system will see that if in billing theis field is empty then the document will be considered as <b>"incomplete".</b> So until the document is complete the document will not be saved properly resulting in the error - <b>"no accounting document generated"</b> 
    Just go through this and check whether the sales order you created is complete and all the relevant data is there in the respective fields.
    Reward points if solution helps.
    Regards,
    Allabaqsh G. Patil

  • Pricing error - Mandatory conditions ZMWS DIFF are missing.

    Hi All,
    We have the error in package quotation Mandatory condition types (ZMWS) & (DIFF) is missing. We check randomly with some customers error is not appearing.(Error is occurring only for particularly ONE customer.)    
    Initially while entering the details in document (customer no., material, sales areau2026) before saving the document the error message is u201CInternal Error during Pricingu201D.
    After saving the document error is occurring as mentioned below.
    Error messages:   
    1. Pricing error: Mandatory condition MT Output Tax (ZMWS) is missing
    2. Pricing error: Mandatory condition Rounding Off (DIFF) is missing.
    Error message is clearing after some work around in the documents.   
    1. At header level, change the currency from CHF to EUR and then back to CHF.This will get rid of Round condition(DIFF).
    2. And to get rid of out put tax, Ship to address (at header partner tab) by change the country from CH to DE, and changing  Transportation zone and Post code country specific to DE. Close the address window and open it again. Change back the address to the original CH and close the window. Out put tax (ZMWS) error will go away.
    Kindly any one can give your valuable inputs on this issue. Your help will highly appreciate.
    Thanks in advance.
    Regards
    Bala

    Hi Michael
       CRM are dtermined using the condition technique(E.g.condition type MWST or UTXJ).Have you assisgned the Business partenr Tax Classification?.If the billing is carried out in the CRM system,tax determination will be accomplsihed by using the TTE.The condition typeOTTE triggers the call of the TTE.Maintenance will take place in CRM.
    PLEASE CHECK
    Business Partner Classification
    *Assignment of tax types and groups
    *Tax Calculation per country and Region.
    *Tax numbers for NATURAL PERSON
    Product Tax Classification.
    *Assisgnment of tax types and Groups
    *Tax Calculation per country and Region
    Organisational Unit-Business place
    Customizing of Tax Types and Tax Groups for BP and Products.
    I hope this helps!!

  • "Pricing error in item 000001 Message no. VF073" in VF01?

    Hi,
    I am not a Sales Consultant and getting the error "Pricing error in item 000001  Message no. VF073" when doing the billing in VF01. Invoice number has been generated but system has not posted the accounting document.
    Please suggest me step by step procedure for what shall I do to rectify the error....
    Thanks and regards
    Nitin

    First check in pricing analysis in your doc,
    Which condition type is marked as mandatory.
    And whether that is relevant to mandatory for the transaction.
    If not then use TCode V/08 .
    Then in your pricing procedure remove mandatory check against the condition type or else maintain the value to the condition type.
    You can refer one of previously posted response for the same.
    - "Pricing error in item 000111---Message no. VF073"
    Regards
    JP

  • Pricing Error in Release Billing Documents for Accounting

    Hi All,
    While executing the VFX3  (clear off the billing list) system displaying the error message and when I click the error log the following error message displayed.
    "0090345866 000000 Document  0090345866 has been saved  (Pricing Error)"
    Can anybody through  some light what could be the reason ?
    Awaiting your valuable reasons.
    Srinivasa Chary

    Hi
    As others mentioned you need to look at conditions tab in Billing doc and see if there is any pricing related error. You can also use analysis part to see which condition has problem.
    Another reason could be  > the taxes on sales order and Billing doc may not have been calculated. The reason is there is no tax jurisdiction code maintained for the ship-to party in the sales order.
    If the above is the case, the tax jurisdiction code should be maintained for ship-to from within sales order ( Goto > header> partner > double click on ship-to and the address screen opens up. You can add tax jurisdiction and save the order. This will solve the problem for this sales order alone.
    If you run the new pricing with option copy pricing elements as it is and redermine taxes, your taxes will be calculated.
    This does not automatically correct your billing document error. You need to cancel billing doc (VF11) > reverse goods movement on delivery ( VL09) and unpick delivery and then delete delivery.
    After this, you need to again create delivery with ref to sales order > pick > PGI and then go for billing. This will now rectify the release to accounting issue.
    For permanent problem solving, you need to ask master data team to maintain tax jurisdiction code in ship-to customer using tcode XD03 or VD03...so that the subsequent transactions for this ship-to will be smooth.
    Regards
    Sreedhar Reddy

  • Error message: While activating source system in RSA1

    When trying to activate a source system, I am getting a error message saying, Incorrect IDoc type ZSAG018 in the ALE definition of the source system.
    System response: Error when sending data to BW.
    Procedure: Enter Idoc type ZSAE008.
    Prior to this there was a service pack that was applied to the R/3 system, and while testing thhe info package I got a error message and in source system when trying to activate, I get this message.
    Can anybody kindly help me resolve the issue.
    Message was edited by:
            Muzafaruddin Mohammed

    Hi,
    You try to create the source sytem one more time by deleting it.And also delete the Partner Profiles, port number.
    Re: Source connectivity problem
    With rgds,
    Anil Kumar Sharma .P

  • Error while registering SAP ECC system in UWL systems

    hi,
    Error while registering SAP ECC system in UWL systems.
    Errors:
    System R3Production: Thu Nov 27 16:12:05 GMT+05:30 2008
    (Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Thu Nov 27 16:12:05 GMT+05:30 2008
    (Connector) :com.sap.mw.jco.JCO$Exception:Connect to SAP gateway failed
    Connect_PM  TYPE=A ASHOST=132.147.0.112 SYSNR=00 GWHOST=132.147.0.112 GWSERV=sapgw00 PCS=1
    LOCATION    CPIC (TCP/IP) on local host with Unicode
    ERROR       partner '132.147.0.112:sapgw00' not reached
    TIME        Thu Nov 27 16:12:05 2008
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -10
    MODULE      nixxi.cpp
    LINE        2823
    DETAIL      NiPConnect2
    SYSTEM CALL connect
    ERRNO       79
    ERRNO TEXT  A remote host refused an attempted connect operation.
    COUNTER     2
    Item type retrieval and registration requires a connection to the systems and may take a couple of minutes
    For each system, they are generated as the configuration named 'uwl.webflow.<system_alias>' or 'uwl.alert.<system_alias>'.
    After configuration changes in the backend system, you must re-register the system.
    regards.
    Srinivas.

    Hi,
    you can check few things prior proceeding:
    Does your connector test after adding your backend system in portal works fine?
    Did you define a system alias?
    Make sure your SSO is working,
    Also check your Jco detination webdynpro tab.
    Regards,
    Vamshi.

  • Free Goods Pricing Error

    Dear SAP Gurus,
    I have configurde the Free Goods as Exclusive and accordingly kept the condition records. When I am creating Sales Order, I have given the first line item as 1482 and when I entered
    , the second line item automaticaly vame with item category TANN. Everything is fine up to this. I have kept price in VK11 for the material 1482 and 1483 is the free material.
    At the time of creating Sales Order, it giving the error as "Pricing error: Mandatory Condition ZPR1 is missing"
    I could not find out any solution for this. Please help in finding the solution for this.
    Thanks,
    Jans

    Hi Jans
    Your free goods configuration is something like buy 10 pens and get one pencil free
    Free goods are picked by R100 condition type with requirement 55 and aternate base value formula 28 in the pricing procedure
    Free goods are represented with item category TANN with pricing as B in VOV7 which measns 100 % discount
    This means the price of the pencil is to be maintained as condition record in VK11 for the condition type  ZPR1 (in your case) which will be picked by the system and nullifies it with 100 % discount
    This is missing from your end (this is my guess only)
    Without knowing the price of the second material 1483 how the system will give 100 % discount for it
    Soln is
    Maintain the condition record for the condition type  ZPR1 in VK11 for the free material 1483
    Hope this may help you
    Regards
    Raja

  • Pricing Error - Billing doc. not generated

    Hi All,
    As there was a pricing error in Scheduling agreement the billing document could not be generated.
    Current Status :-
    SA(Scheduling agreement) Created.
    DO(Delivery ) Created
    PGI done.             Stock removed from the system     "Shipment Start"   ON
    Invoice can not be generated , in VF01 
    Pricing Error - YBR0 missing.
    What should be done ? Please help in this issue.
    Regards,
    Nikhil
    Message was edited by:
            Nikhil Pavagadhi

    Hi,
    I think this is something related to Shipment costs calculation. First of all you need to complere the Shipment and proceed for VI01 for Shipment Cost Calculation. You need to maintain condition record for YBR0 and then create Invoice. Hope this will work for you. Please let us know for further problems.
    Regards
    SD
    Message was edited by:
            Samier Danish

  • Error during copy of partner: Partner role VN

    I am creating an Inbound Delivery from an Outbound using SPED output type on the Outbound Delivery.
    When I process the output using vl71 I get the following error.
    Can anyone tell me what im missing.
    The same scenario works for other plants except this one, its between 2 new plants in a new company code.
    What do i do?
    Type Message text
         Object 0080011663
         Output type: Stk.Transf.CrteDeliv
         Processing log for program /SPE/STO_ID_PROCESSING routine STO_ID_CREATION
         Error during copy of partner: Partner role VN
         Error during copy of partner: Partner role VN
         Error during copy of partner: Partner role VN
         No inbound delivery created for the replenishment delivery 0080011663

    This issue has been resolved.
    I recreated the Vendor from scratch and switched plant config settings to the new Vendor and entered the new vendor number in the Customer and retried the process. It works.
    So i think there was something wrong with the initial Vendor setup.(Though i checked view by view and didnt find any difference)

  • Pricing errors are not cleared after fixing the master data

    Hi All,
    Kindly go through the issue explained below.
    Pricing is determined properly in transaction level(Oppt) when the master data is correct. cool.  
    System shows pricing error (Mandatory condition 0PR0 is missing, Pricing could not be determined) when price(condition record) is not maintained in product. This is also fine.  Now the issue is, Pricing errors are not going away from Opportunity even after the master data(product) fixed with maintaining pricing.
    Scenario     :  Opportunity is saved with pricing errors. 
    Analysis     :  Price or/and Sales area are not maintained in Product that is maintained in Oppt.  That is why this error occurs.  So, we have maintained the Sales area/Price(condition record) in product. Now master data is corrected.
    Expected result: After maintaining the price/sales area in product, the errors should go off from the created Opportunities and pricing should be determined properly.
    Actual result: When we create a new opportunity with the same product, pricing is determined.  But the errors are not going away from the already created opportunity transactions.
    Please let me know if this scenario is not clear to understand. 
    Please help with your inputs.  Thank you for your time.
    Regards,
    Maddy

    Hi Luis,
    Thank you very much for your reply.  Could you please help me where is the button 'Redermine Pricing' available?  I have checked in Opportunity transaction but failed.
    Regards,
    Maddy

  • Posting document not created (Pricing Error)

    Hello Everybody,
    I have a problem with a invoice. If i go to VF03, I can see a positing status as F Posting document not created (pricing error). The error message is showing as pricing error in item 000010 Message No. VF 073. Kindly help me how to unblock this invoice.
    Your help much appreciated.
    Regards,
    Ravi

    Hi,
    I think problem is in VKOA settings. Please go to VF03. Press Shift + F11. System will lead to Revenue Account Determination analysis. Please check the settings.
    Regards,
    Jigar

Maybe you are looking for

  • Excise invoice creation incase of price increase

    Dear all, I am facing a problem in case supplementary billing scenario at my client's place. Some times price of the material increases and that price will be effected from past date.Then a supplementary excise is created with values consisting of Di

  • How do I save an e mail address

    When I receive an e mail I do not know how to add the address to my contacts list. Any ideas

  • Image Processor Pro xml issue:

    When I download the script Image Processor Pro.xml to my window 7 computer with CS6,  the File Type reads "Safari Document"  When I select my images in bridge and try to run IPP the only thing that happens is a blank white window opens and sometime P

  • Deleting request options in Cube?

    Hi, The Cube is Not Compressed where Aggregate Rollup and Compression of Aggregate rollup are available. Now, I need to delete only one request from the Cube. I have found two options 1) Delete this request directly from Cube (Via Manage option of RS

  • Setting artboard size in an action CS4

    I'm converting large numbers of emf files to svg files. In CS3 I can do this simply by recording, open, save as , close. In CS3 it doesn't take account of the artbord in this process so It doesn't matter what the size of the original graphic is, the