Outlook 2010 Spell Checker AutoCorrect Issue

I have a senior executive who is running Office Professional 2010 Plus (32-bit) on Windows 7 Enterprise.  His Outlook spell checker has been working fine up to very recently (not sure of the exact date of his issue).
AutoCorrect is turned on in Outlook.
When he types an E-mail, if a word is typed incorrectly, Outlook will not flag it with the red curly lines until he presses the Enter button one time.  From that point forward, incorrect words will be marked once he presses the spacebar.  No correction
occurs until the Enter button is pressed one time.
I ran a repair on Office on his machine and disabled then re-enabled "Check Spelling as you type."
Can anyone advise what is wrong .. that the user must press the Enter key one time to start the spell checker.  It is not doing it on either of my 2 machines.
Any help would be greatly appreciated.  Thank you!
David Langer Helpdesk Analyst Kimco Realty Corporation [email protected]

Compare the AutoCorrect setting from the File > Options > Mail > Spelling and AutoCorrect > AutoCorrect Options, is there any difference between yours and the following one?
Tony Chen
TechNet Community Support

Similar Messages

  • Outlook 2013 spell check

    outlook 2013 spell check just does't work

    Hello,
    Please first make sure that you are not typing in the signature field, the spell check won't conduct when you are typing in the signature field.
    If you are in the normal email body field, please click File > Options > Mail > Editor Options button > AutoCorrect Options button, make sure that the settings are set properly.
    Also make sure you have checked the box labelled "Check spelling as you type" under File > Options > Mail > Editor Options button > Section "When correcting spelling in Outlook".
    If above doesn't applies, exit Outlook, then try to find the NormalEmail.dotm template and rename it to
    NormalEmail.old. Restart Outlook to check the result. By default, the
    NormalEmail.dotm file is in:
    C:\Users\%username%\AppData\Roaming\Microsoft\Templates
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Enable OWA 2010 Spell Check On As Default?

    The default setting for the Outlook Web App for Exchange 2010 is off and if users want spell check in OWA, they have to go into Options and find the check box to enable it.
    We would like to set the OWA spell check default to be enabled, so that the users only have to go into the options if they want to turn it off.
    How can we set the default setting to be spell check enabled for OWA 2010?

    We need to get Windows 8.1 Pro licenses for every computer (to join them to the domain), but we would not need to purchase a separate volume license for every computer.
    My understanding is that we only need a single 8.1 Pro volume license to obtain the Volume license media and activation key and then we can apply that to all the computers in our organization that are already otherwise licensed to have the version of the
    OS.
    We only need Volume licensing for the purpose of reimaging so we won't have to deal with manually entering a different retail key on every system and manually activating each one.
    It appears we could use the $100 Pro Pack to upgrade each system from Bing to Pro, but the Pro Pack upgrade would then be tied to the OEM license which is tied to the hardware, so you lose the licenses if the computers are replaced.  However, I think
    if we buy the full $199 Windows 8.1 retail media for each system, we could reuse the license in the future if we replace these systems due to damage or loss

  • Acrobat X/Outlook 2010 Home Page/Webfolders Issue

    All - I will apologize upfront if this does not belong in this forum, or it is felt that this is not an Acrobat issue.
    We utilize a little used feature called Home Page/Webfolders in Outlook. Basically what we all grown accustomed to is creating a folder in Outlook and then change the folder properties>Home Page to point to PDF files that reside on our intranet site. Then when you want to view a PDF you click on the Outlook folder and bingo its displayed right within outlook. (This works great for those that live in Outlook and want quick access to common PDFs on the intranet (Org charts, phone lists, etc))
    So after a recent round of computer upgrades (windows 7, Outlook 2010 and Acrobat x) all of a sudden the Homepage/web folder funtion has stopped working. Specifically the PDF files are not displaying in the outlook folder. You just get a blank page where the page would have rendered.
    We have done some testing and Acrobat 9 with Outlook 2010 works just fine! which is why I am here.
    Thoughts?
    I can tell you that from what we can tell Acrobat X is installed and working properly. Even the PDF preview option has been selected by default in Outlook. I should also point out that we have had many computers previously running windows 7, and Outlook 2010 and did not have any troubles. The recent change appears to be related to Acrobat X.
    Thank you in advance.

    LoriUAC - thanks for the reply! yes we have everything full patched and up to date. While we have done a repair on some of the machines, the issue (which I may not have mentioned) is that this is widespread. It appears that everyone running Outlook 2010 with AcrobatX has the same issue.
    With that said, is anyone also having the issue or is this isolated to just us?
    Thanks again!

  • Outlook Express spell check language?

    After not using OutlookEexp. for a while, I now find that the language in spell check if French? How do I change to English ? TY

    Satellite P35-S6053 
    ..has office 2007
    Somehow someone??? changed the spell check langauge to french ?
    Nobody did it. Office 2007 is the culprit.
    Outlook Express has no spell checker of its own. Rather, it uses whatever it can find. When Office 2007 was installed, most of the spell checking files were replaced with versions incompatible with Outlook Express.
       You no longer have spell checking capabilities in some languages in Outlook Express 6.0 after you in...
    Turns out that French still works.
    Downloading a free spell checker is the simplest way around this.
    Vampirefo is a popular solution.
       From Major Geeks
       From SnapFiles
    Or you may like tinySpell, which checks the spelling as you type.
    If you have a previous version of Office handy, see Office 2007 and OE Spell Check.
    -Jerry

  • Lync 2010 Spell Check

    Hi
    Is there a way to get spell checking working with Lync 2010 without having to set up third party software? I have Office 2010 installed and I did read somewhere that if you download and install Office 2013 proofing tools it should work, but it hasn't.
    Any help would be great
    Thanks
    EverJay

    Check out Matt Landis' write up here. If you don't want 3rd party, basically the only other option is to run Windows 8
    http://windowspbx.blogspot.ca/2011/10/lync-30-second-tip-of-day-7-spell.html
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
    Georg Thomas | Lync MVP
    Blog www.lynced.com.au | Twitter
    @georgathomas
    Lync Edge Port Check (Beta)

  • Outlook 2013 on 1012 RDS and Outlook 2010 FAT client font issue

    Our terminal server was changed from a 2008 RDP box with Office 2003 to a 2012 RDS box with office 2013 on it. Now if a user changes a font - or any view setting - on the 2013 copy on the terminal box, their desktop in the office which runs Outlook 2010
    has the 2013 settings. Why and how - if possible - do I make that stop?
    Thanks!

    Hi Creant,
    Not quite sure if there is any way to change this behavior, but I'm sure that the product team already got this feedback from other users. See this thread:
    https://social.technet.microsoft.com/Forums/exchange/en-US/3e1b0f63-20a9-49b8-8500-21eec0751421/how-do-i-stop-outlook-from-syncing-fonts-between-pcs
    This forum focuses on questions and feedback for Microsoft Office client. I would suggest you post in our Exchange forum to see if there is any way to configure this:
    https://social.technet.microsoft.com/Forums/office/en-US/home?category=exchangeserver
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Office 2010 spell check not working

    Hi,
    I cant get my spell check to work or underline any incorrect words. I have tried reinstalling word, deleting normal.dotm also the suggestions here
    http://social.technet.microsoft.com/Forums/en-US/office2010/thread/eb94c560-9bc3-4b51-a2dc-bee5cef46bb0 and here
    http://support.microsoft.com/kb/970826 and still no joy.
    If I email a doc to somebody else their spell checker will also not pick up and wrong spellings in my doc
    Any ideas?
    Celtic

    Hi,
    Thank you for using
    Microsoft Office for IT Professionals Forums.
    From your description, please try the following methods:
    1.        
    Open the problem document.
    2.        
    Press the
    Ctrl+A keys to select the entire text.
    3.        
    From the
    Review tab, select Language then Set Proofing Language…
    4.        
    In the
    Language dialog make sure the correct language is selected.
    5.        
    Verify the checkbox
    Do not check spelling or grammar is unchecked.
    6.        
    Click
    OK.
    7.        
    Click the
    File tab.
    8.        
    Under
    Help, click Options.
    9.        
    Under
    Correcting spelling and grammar in Word, click Recheck Document.
    10.    
    To recheck the spelling and grammar, click
    Yes when you see the following message: This operation resets the spelling checker and the grammar checker so that Word will recheck words and grammar you previously checked and chose to ignore. Do you want to continue?
    11.    
    In the
    Word Options dialog box, click OK to get back to the document.
    12.    
    On the
    Review tab, in the Proofing group, click
    Spelling & Grammar.
    Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
    I can do for you, please feel free to let me know.
    Sincerely
    Rex Zhang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Word 2010 spell check gets disabled after Windows Updates

    Each time the computer receives updates, the proofing settings seem to revert to disabled. The settings getting reset are
     - Check spelling as you type
     - Mark grammar errors as you type
     - Check grammar with spelling
    I only notice the issue in Word and have tried running a repair on Office. Any help is appreciated

    Hi,
    Just checking in to see if the information was helpful. Please let us know if you would like further assistance.
    Thanks,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Outlook 2010 and smtp security issue

    I get this message when I "Test Settings"
    Send test e-mail message: Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator or Internet service provider (ISP) for additional assistance.
    I have checked to make sure SSL is being used and also the port 587 is used.  Can anyone help me, please?

    There was no need to play around, these are the recomended settings from Apple, published for all to see:
    IMAP (Incoming Mail Server) information:
    Server name: imap.mail.me.com
    SSL Required: Yes
    Port: 993
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    SMTP (outgoing mail server) information:
    Server name: smtp.mail.me.com
    SSL Required: Yes
    Port: 587
    SMTP Authentication Required: Yes
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    Note: If you receive errors using SSL, try using TLS instead.

  • Spell check form issue

    Hi All,
    I am trying to implement Jspell into my form but i am geting lot of errors.i have download trial version of Jspell and follow all the steps given in the integration.html file. when i run from browser i am geting java.lang.ClassNotFoundException:oracle.forms.engine.Main error.i am usging 10g forms and database in standalone system.

    Hi Arun,
    I am new to oracle forms.i got assignment to check spelling on a text item using Jspell check.So i download the Jspell trial version and follow the steps given in integration.html file. I wants to know where i have to copy JSpellIntegration.jar file.In the integration.html it is mentioned that it should copy on "codebase directory being used to deploy the Forms Services".i am confused where this directory exactly situated.

  • 2010 OUTLOOK SPELL CHECKER

    Outlook 2010 spell checker stopped working.
    Its not auto correcting, or when you go to spell check it says all ok - when there are errors
    i have checked the language is set ok, everything seems the same as it was
    any ideas?

    please check read  actical from below link.
    http://blog.lanlogic.net/blog/spell-check-in-outlook-2010-not-working/
    https://support.office.com/en-au/article/Choose-how-spell-check-and-grammar-check-work-71fd027a-be9c-42b0-8055-75f46324a16a

  • Strange drag and drop email issue with Outlook 2010

    Has anyone experienced this? It only started happening recently. It may have something to do with an installation of the most recent Office 2010 service pack. Here's the scenario: Using Outlook 2010 professional Try dragging an email from the email list
    on the right into the list of folders on the left in order to file it When the drag crosses the email list to the folder list, the email drops into some random folder The drag operation picks up a random folder and now has a random folder attached to the drag
    In other words, the email disappears somewhere and is replaced by a folder in the drag operation. It's not a mouse button issue as this doesn't happen anywhere else on the system while dragging, only in Outlook. Any thoughts?
    my PC Techs http://www.mypctechs.com

    Hi
    Thank you for using
    Microsoft Office for IT Professionals Forums.
    From your description, we can follow these Method to troubleshoot.
    Method A
    Start outlook in Safe Mode, Press and hold the
    CTRL key, and then click Outlook program
    If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Outlook program, we can try to disable
    them.
    Method B
    We can try to create a new profile in Microsoft Office Outlook 2010 to test the issue, follow these steps:
    1.
    Exit Outlook.
    2.
    Go to Start > Control Panel, click or double-click Mail.
    3.
    Click Show Profiles. Choose Prompt for a profile to be used.
    4.
    Click Add.
    5.
    Type a name for the profile, and then click OK.
    6.
    Highlight the profile, and choose Properties. Then Email Accounts..., add your email account in the profile.
    7.
    Start Outlook, and choose this new profile.
    If this problem does not occur in the new Outlook profile, the old Outlook profile is corrupted. We can delete that and use a new Outlook profile.
    More information you can refer to this KB article:
    http://support.microsoft.com/kb/829918
    Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
    I can do for you, please feel free to let me know.
    Best Regards, 
    William Zhou
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for
    TechNet Subscriber Support, contact
    [email protected]

  • Free Busy takes over 30 seconds to retrieve on Outlook 2010 using Exchange Server 2010

    We have a small 100 user domain running Exchange server 2010 and outlook 2010 clients.  The issue is that Retrieving Free/Busy takes over 30 seconds.  
    So someone is trying to schedule a meeting has to wait Minutes see the Free/busy time for many users..  I have checked and all the users in question have published at least one month free busy time.
    It seems it would be much faster.  Anyone have this same experience and know of a way to speed it up?
    thanks in Advance
    David 

    Hi David,
    Does the issue happen in OWA? In Exchange 2010, the free/busy information is retreved by using Availability service (EWS url). Generally, if a user wants to view free/busy information when create a meeting, the http Availability service request
    would send to CAS server.
    Please check whether the usage in Exchange server is high when the slow free/busy information occurs. This reflect time would also be related to the network in your environment.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Outlook 2010 Scheduling Assistent - No free busy information can be received.

    Folks:
    I have recently upgraded to Outlook 2010 running on Windows 7 x64.  My email is exchange based. My machine is not a member of the domain my exchange server is in. 
    I access it my a stored credential.
    Everything is fine except for Scheduling assistant.  All the folks invited to a meeting (except for myself) show up as "No Information Available".
    I have found plenty of posts that suggest this is also a Outlook 2007 issue, and that creating a key HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\Options\Calendar\UseLegacyFB
    (value 1) solves the issue.  (Example:http://social.technet.microsoft.com/Forums/en-US/exchangesvrgeneral/thread/c765605d-27a7-4784-993c-925394e2e09f)  I did create the key on my Outlook 2010 machine - but in HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Options\Calendar
    key.  It is not resolving my issue.
    Does anyone know the Outlook 2010 solution to this issue?  Note:  I have Administrative privilege on my Client - but no privilege on the server.  I need to get
    Outlook 2010 to interface with Exchange 2007.
    John

    Hi John,
    Thank you for using Outlook IT Pro Discussions forum. 
    From your description, I understand that you are using Outlook 2010 and Exchange account.
    There is no free busy information when using scheduling assistant. If there is any misunderstanding, please feel free to let me know.
    First, you must be using an Exchange server and everyone must publish their free/busy information. 
    Check from File > Options > Calendar Options > Free/Busy Options. 
    Make sure the month value for publishing is not zero.
    Also, I found a similar thread here:
    http://social.technet.microsoft.com/Forums/en-GB/exchangesvradmin/thread/5991f3b6-f0cc-432f-82c6-f24da0a42862
    You can also try the suggestions in that thread to recreate the web services virtual directory
    ===============
    1. Remove-WebServicesVirtualDirectory -identity "Servername\EWS (Default Web Site)" -identity "Servername\EWS (Default Web Site)"
    2. IISReset –noforce
    3. New-WebServicesVirtualDirectory
    4. IISReset –noforce
    If this problem persists, it might be related to some settings on the Exchange server side. You can also post this thread in Exchange server forum:
    http://social.technet.microsoft.com/Forums/en-GB/exchangesvradmin/threads
    Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything I can do for
    you, please feel free to let me know.
    Best Regards,
    Sally Tang

Maybe you are looking for